diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3stalker.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3stalker.c | 118 |
1 files changed, 55 insertions, 63 deletions
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index b318f5602e3..a2e035e0792 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -28,28 +28,25 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/mmc/host.h> +#include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> +#include <linux/interrupt.h> +#include <linux/smsc911x.h> +#include <linux/platform_data/at24.h> +#include <linux/usb/phy.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <plat/board.h> #include "common.h" -#include <plat/gpmc.h> -#include <plat/nand.h> -#include <plat/usb.h> +#include "gpmc.h" +#include <linux/platform_data/mtd-nand-omap2.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> -#include <plat/mcspi.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/interrupt.h> -#include <linux/smsc911x.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/spi-omap2-mcspi.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" @@ -57,7 +54,7 @@ #include "common-board-devices.h" #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" #define OMAP3STALKER_ETHR_START 0x2c000000 #define OMAP3STALKER_ETHR_SIZE 1024 @@ -96,50 +93,46 @@ static void __init omap3_stalker_display_init(void) { return; } +static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = -1, +}; -static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev) -{ -} +static struct platform_device omap3stalker_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &omap3stalker_dvi_connector_pdata, +}; -static struct omap_dss_device omap3_stalker_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, -#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO) - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, -#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) - .u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE, -#endif - .platform_enable = omap3_stalker_enable_tv, - .platform_disable = omap3_stalker_disable_tv, +static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = DSS_ENABLE_GPIO, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = DSS_ENABLE_GPIO, +static struct platform_device omap3stalker_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &omap3stalker_tfp410_pdata, }; -static struct omap_dss_device omap3_stalker_dvi_device = { - .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct connector_atv_platform_data omap3stalker_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE, + .invert_polarity = false, }; -static struct omap_dss_device *omap3_stalker_dss_devices[] = { - &omap3_stalker_tv_device, - &omap3_stalker_dvi_device, +static struct platform_device omap3stalker_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &omap3stalker_tv_pdata, }; static struct omap_dss_board_info omap3_stalker_dss_data = { - .num_devices = ARRAY_SIZE(omap3_stalker_dss_devices), - .devices = omap3_stalker_dss_devices, - .default_device = &omap3_stalker_dvi_device, + .default_display_name = "dvi", }; static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = { @@ -279,9 +272,6 @@ omap3stalker_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = omap3stalker_twl_gpio_setup, }; @@ -362,22 +352,23 @@ static int __init omap3_stalker_i2c_init(void) #define OMAP3_STALKER_TS_GPIO 175 -static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 21, + .vcc_gpio = -EINVAL, + }, }; static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, + &omap3stalker_tfp410_device, + &omap3stalker_dvi_connector_device, + &omap3stalker_tv_connector_device, }; -static struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 21, - .reset_gpio_port[2] = -EINVAL, }; #ifdef CONFIG_OMAP_MUX @@ -399,8 +390,6 @@ static void __init omap3_stalker_init(void) { regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); - omap_board_config = omap3_stalker_config; - omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); omap_mux_init_gpio(23, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); @@ -414,7 +403,10 @@ static void __init omap3_stalker_init(void) omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); @@ -437,6 +429,6 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_stalker_init, .init_late = omap35xx_init_late, - .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .init_time = omap3_secure_sync32k_timer_init, + .restart = omap3xxx_restart, MACHINE_END |
