diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3stalker.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3stalker.c | 454 |
1 files changed, 108 insertions, 346 deletions
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 2a2dad447e8..a2e035e0792 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -24,99 +24,54 @@ #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/mmc/host.h> +#include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> +#include <linux/interrupt.h> +#include <linux/smsc911x.h> +#include <linux/platform_data/at24.h> +#include <linux/usb/phy.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <plat/board.h> -#include <plat/common.h> -#include <plat/gpmc.h> -#include <plat/nand.h> -#include <plat/usb.h> -#include <plat/display.h> -#include <plat/panel-generic-dpi.h> +#include "common.h" +#include "gpmc.h" +#include <linux/platform_data/mtd-nand-omap2.h> +#include <video/omapdss.h> +#include <video/omap-panel-data.h> -#include <plat/mcspi.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/interrupt.h> -#include <linux/smsc911x.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/spi-omap2-mcspi.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" +#include "common-board-devices.h" #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#include "gpmc-smsc911x.h" + #define OMAP3STALKER_ETHR_START 0x2c000000 #define OMAP3STALKER_ETHR_SIZE 1024 #define OMAP3STALKER_ETHR_GPIO_IRQ 19 #define OMAP3STALKER_SMC911X_CS 5 -static struct resource omap3stalker_smsc911x_resources[] = { - [0] = { - .start = OMAP3STALKER_ETHR_START, - .end = - (OMAP3STALKER_ETHR_START + OMAP3STALKER_ETHR_SIZE - 1), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ), - .flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW), - }, -}; - -static struct smsc911x_platform_config smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = OMAP3STALKER_SMC911X_CS, + .gpio_irq = OMAP3STALKER_ETHR_GPIO_IRQ, + .gpio_reset = -EINVAL, .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), }; -static struct platform_device omap3stalker_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(omap3stalker_smsc911x_resources), - .resource = &omap3stalker_smsc911x_resources[0], - .dev = { - .platform_data = &smsc911x_config, - }, -}; - static inline void __init omap3stalker_init_eth(void) { - int eth_cs; - struct clk *l3ck; - unsigned int rate; - - eth_cs = OMAP3STALKER_SMC911X_CS; - - l3ck = clk_get(NULL, "l3_ck"); - if (IS_ERR(l3ck)) - rate = 100000000; - else - rate = clk_get_rate(l3ck); - omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); - if (gpio_request(OMAP3STALKER_ETHR_GPIO_IRQ, "SMC911x irq") < 0) { - printk(KERN_ERR - "Failed to request GPIO%d for smc911x IRQ\n", - OMAP3STALKER_ETHR_GPIO_IRQ); - return; - } - - gpio_direction_input(OMAP3STALKER_ETHR_GPIO_IRQ); - - platform_device_register(&omap3stalker_smsc911x_device); + gpmc_smsc911x_init(&smsc911x_cfg); } #else @@ -134,126 +89,58 @@ static inline void __init omap3stalker_init_eth(void) #define LCD_PANEL_BKLIGHT_GPIO 210 #define ENABLE_VPLL2_DEV_GRP 0xE0 -static int lcd_enabled; -static int dvi_enabled; - static void __init omap3_stalker_display_init(void) { return; } - -static int omap3_stalker_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - gpio_set_value(DSS_ENABLE_GPIO, 1); - gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 1); - lcd_enabled = 1; - return 0; -} - -static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_set_value(DSS_ENABLE_GPIO, 0); - gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 0); - lcd_enabled = 0; -} - -static struct panel_generic_dpi_data lcd_panel = { - .name = "generic", - .platform_enable = omap3_stalker_enable_lcd, - .platform_disable = omap3_stalker_disable_lcd, +static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = -1, }; -static struct omap_dss_device omap3_stalker_lcd_device = { - .name = "lcd", - .driver_name = "generic_dpi_panel", - .data = &lcd_panel, - .phy.dpi.data_lines = 24, - .type = OMAP_DISPLAY_TYPE_DPI, +static struct platform_device omap3stalker_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &omap3stalker_dvi_connector_pdata, }; -static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev) -{ -} - -static struct omap_dss_device omap3_stalker_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, -#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO) - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, -#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) - .u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE, -#endif - .platform_enable = omap3_stalker_enable_tv, - .platform_disable = omap3_stalker_disable_tv, +static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = DSS_ENABLE_GPIO, }; -static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - gpio_set_value(DSS_ENABLE_GPIO, 1); - dvi_enabled = 1; - return 0; -} - -static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(DSS_ENABLE_GPIO, 0); - dvi_enabled = 0; -} - -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", - .platform_enable = omap3_stalker_enable_dvi, - .platform_disable = omap3_stalker_disable_dvi, +static struct platform_device omap3stalker_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &omap3stalker_tfp410_pdata, }; -static struct omap_dss_device omap3_stalker_dvi_device = { - .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct connector_atv_platform_data omap3stalker_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE, + .invert_polarity = false, }; -static struct omap_dss_device *omap3_stalker_dss_devices[] = { - &omap3_stalker_lcd_device, - &omap3_stalker_tv_device, - &omap3_stalker_dvi_device, +static struct platform_device omap3stalker_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &omap3stalker_tv_pdata, }; static struct omap_dss_board_info omap3_stalker_dss_data = { - .num_devices = ARRAY_SIZE(omap3_stalker_dss_devices), - .devices = omap3_stalker_dss_devices, - .default_device = &omap3_stalker_dvi_device, + .default_display_name = "dvi", }; -static struct platform_device omap3_stalker_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &omap3_stalker_dss_data, - }, -}; - -static struct regulator_consumer_supply omap3stalker_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply omap3stalker_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply omap3stalker_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -266,8 +153,8 @@ static struct regulator_init_data omap3stalker_vmmc1 = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3stalker_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vmmc1_supply), + .consumer_supplies = omap3stalker_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -280,16 +167,17 @@ static struct regulator_init_data omap3stalker_vsim = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3stalker_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vsim_supply), + .consumer_supplies = omap3stalker_vsim_supply, }; static struct omap2_hsmmc_info mmc[] = { { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = 23, + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = -EINVAL, + .gpio_wp = 23, + .deferred = true, }, {} /* Terminator */ }; @@ -359,13 +247,8 @@ omap3stalker_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); - - /* link regulators to MMC adapters */ - omap3stalker_vmmc1_supply.dev = mmc[0].dev; - omap3stalker_vsim_supply.dev = mmc[0].dev; + omap_hsmmc_late_init(mmc); /* * Most GPIOs are for USB OTG. Some are mostly sent to @@ -373,12 +256,11 @@ omap3stalker_twl_gpio_setup(struct device *dev, */ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, + "EN_LCD_BKL"); /* gpio + 7 == DVI Enable */ - gpio_request(gpio + 7, "EN_DVI"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -390,17 +272,10 @@ omap3stalker_twl_gpio_setup(struct device *dev, } static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .setup = omap3stalker_twl_gpio_setup, }; -static struct twl4030_usb_data omap3stalker_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_DOWN), @@ -435,81 +310,12 @@ static struct twl4030_keypad_data omap3stalker_kp_data = { .rep = 1, }; -static struct twl4030_madc_platform_data omap3stalker_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_codec_audio_data omap3stalker_audio_data = { - .audio_mclk = 26000000, -}; - -static struct twl4030_codec_data omap3stalker_codec_data = { - .audio_mclk = 26000000, - .audio = &omap3stalker_audio_data, -}; - -static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = { - .supply = "vdda_dac", - .dev = &omap3_stalker_dss_device.dev, -}; - -/* VDAC for DSS driving S-Video */ -static struct regulator_init_data omap3_stalker_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_stalker_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_stalker_vpll2_supply = { - .supply = "vdds_dsi", - .dev = &omap3_stalker_lcd_device.dev, -}; - -static struct regulator_init_data omap3_stalker_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_stalker_vpll2_supply, -}; - static struct twl4030_platform_data omap3stalker_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .keypad = &omap3stalker_kp_data, - .madc = &omap3stalker_madc_data, - .usb = &omap3stalker_usb_data, .gpio = &omap3stalker_gpio_data, - .codec = &omap3stalker_codec_data, - .vdac = &omap3_stalker_vdac, - .vpll2 = &omap3_stalker_vpll2, -}; - -static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3stalker_twldata, - }, + .vmmc1 = &omap3stalker_vmmc1, + .vsim = &omap3stalker_vsim, }; static struct at24_platform_data fram_info = { @@ -528,15 +334,16 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { static int __init omap3_stalker_i2c_init(void) { - /* - * REVISIT: These entries can be set in omap3evm_twl_data - * after a merge with MFD tree - */ - omap3stalker_twldata.vmmc1 = &omap3stalker_vmmc1; - omap3stalker_twldata.vsim = &omap3stalker_vsim; + omap3_pmic_get_config(&omap3stalker_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | + TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + omap3stalker_twldata.vdac->constraints.apply_uV = true; + omap3stalker_twldata.vpll2->constraints.apply_uV = true; + omap3stalker_twldata.vpll2->constraints.name = "VDVI"; - omap_register_i2c_bus(1, 2600, omap3stalker_i2c_boardinfo, - ARRAY_SIZE(omap3stalker_i2c_boardinfo)); + omap3_pmic_init("twl4030", &omap3stalker_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, ARRAY_SIZE(omap3stalker_i2c_boardinfo3)); @@ -544,79 +351,24 @@ static int __init omap3_stalker_i2c_init(void) } #define OMAP3_STALKER_TS_GPIO 175 -static void ads7846_dev_init(void) -{ - if (gpio_request(OMAP3_STALKER_TS_GPIO, "ADS7846 pendown") < 0) - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - - gpio_direction_input(OMAP3_STALKER_TS_GPIO); - gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_STALKER_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .settle_delay_usecs = 150, -}; -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3stalker_spi_board_info[] = { - [0] = { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_STALKER_TS_GPIO), - .platform_data = &ads7846_config, +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 21, + .vcc_gpio = -EINVAL, }, }; -static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { -}; - -static void __init omap3_stalker_init_irq(void) -{ - omap_board_config = omap3_stalker_config; - omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); - omap2_init_common_infrastructure(); - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL); - omap_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif -} - static struct platform_device *omap3_stalker_devices[] __initdata = { - &omap3_stalker_dss_device, &keys_gpio, + &omap3stalker_tfp410_device, + &omap3stalker_dvi_connector_device, + &omap3stalker_tv_connector_device, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 21, - .reset_gpio_port[2] = -EINVAL, +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, }; #ifdef CONFIG_OMAP_MUX @@ -629,28 +381,34 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), }; static void __init omap3_stalker_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); + omap_mux_init_gpio(23, OMAP_PIN_INPUT); + omap_hsmmc_init(mmc); + omap3_stalker_i2c_init(); platform_add_devices(omap3_stalker_devices, ARRAY_SIZE(omap3_stalker_devices)); - spi_register_board_info(omap3stalker_spi_board_info, - ARRAY_SIZE(omap3stalker_spi_board_info)); + omap_display_init(&omap3_stalker_dss_data); omap_serial_init(); - usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); - ads7846_dev_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); + usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); + usbhs_init(&usbhs_bdata); + omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP); @@ -664,9 +422,13 @@ static void __init omap3_stalker_init(void) MACHINE_START(SBC3530, "OMAP3 STALKER") /* Maintainer: Jason Lam -lzg@ema-tech.com */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .map_io = omap3_map_io, - .init_irq = omap3_stalker_init_irq, + .init_early = omap35xx_init_early, + .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_stalker_init, - .timer = &omap_timer, + .init_late = omap35xx_init_late, + .init_time = omap3_secure_sync32k_timer_init, + .restart = omap3xxx_restart, MACHINE_END |