aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/board-omap3stalker.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3stalker.c')
-rw-r--r--arch/arm/mach-omap2/board-omap3stalker.c171
1 files changed, 72 insertions, 99 deletions
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index cb089a46f62..a2e035e0792 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -24,31 +24,29 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_data/at24.h>
+#include <linux/usb/phy.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <plat/board.h>
#include "common.h"
-#include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/usb.h>
+#include "gpmc.h"
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-data.h>
-#include <plat/mcspi.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/interrupt.h>
-#include <linux/smsc911x.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mux.h"
@@ -56,7 +54,7 @@
#include "common-board-devices.h"
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
#define OMAP3STALKER_ETHR_START 0x2c000000
#define OMAP3STALKER_ETHR_SIZE 1024
@@ -72,15 +70,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = {
static inline void __init omap3stalker_init_eth(void)
{
- struct clk *l3ck;
- unsigned int rate;
-
- l3ck = clk_get(NULL, "l3_ck");
- if (IS_ERR(l3ck))
- rate = 100000000;
- else
- rate = clk_get_rate(l3ck);
-
omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP);
gpmc_smsc911x_init(&smsc911x_cfg);
}
@@ -100,75 +89,50 @@ static inline void __init omap3stalker_init_eth(void)
#define LCD_PANEL_BKLIGHT_GPIO 210
#define ENABLE_VPLL2_DEV_GRP 0xE0
-static int lcd_enabled;
-static int dvi_enabled;
-
static void __init omap3_stalker_display_init(void)
{
return;
}
-
-static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
-static struct omap_dss_device omap3_stalker_tv_device = {
- .name = "tv",
- .driver_name = "venc",
- .type = OMAP_DISPLAY_TYPE_VENC,
-#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
- .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
-#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
- .u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE,
-#endif
- .platform_enable = omap3_stalker_enable_tv,
- .platform_disable = omap3_stalker_disable_tv,
+static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = {
+ .name = "dvi",
+ .source = "tfp410.0",
+ .i2c_bus_num = -1,
};
-static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev)
-{
- if (lcd_enabled) {
- printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
- return -EINVAL;
- }
- gpio_set_value(DSS_ENABLE_GPIO, 1);
- dvi_enabled = 1;
- return 0;
-}
+static struct platform_device omap3stalker_dvi_connector_device = {
+ .name = "connector-dvi",
+ .id = 0,
+ .dev.platform_data = &omap3stalker_dvi_connector_pdata,
+};
-static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
-{
- gpio_set_value(DSS_ENABLE_GPIO, 0);
- dvi_enabled = 0;
-}
+static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = {
+ .name = "tfp410.0",
+ .source = "dpi.0",
+ .data_lines = 24,
+ .power_down_gpio = DSS_ENABLE_GPIO,
+};
-static struct panel_dvi_platform_data dvi_panel = {
- .platform_enable = omap3_stalker_enable_dvi,
- .platform_disable = omap3_stalker_disable_dvi,
+static struct platform_device omap3stalker_tfp410_device = {
+ .name = "tfp410",
+ .id = 0,
+ .dev.platform_data = &omap3stalker_tfp410_pdata,
};
-static struct omap_dss_device omap3_stalker_dvi_device = {
- .name = "dvi",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "dvi",
- .data = &dvi_panel,
- .phy.dpi.data_lines = 24,
+static struct connector_atv_platform_data omap3stalker_tv_pdata = {
+ .name = "tv",
+ .source = "venc.0",
+ .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
+ .invert_polarity = false,
};
-static struct omap_dss_device *omap3_stalker_dss_devices[] = {
- &omap3_stalker_tv_device,
- &omap3_stalker_dvi_device,
+static struct platform_device omap3stalker_tv_connector_device = {
+ .name = "connector-analog-tv",
+ .id = 0,
+ .dev.platform_data = &omap3stalker_tv_pdata,
};
static struct omap_dss_board_info omap3_stalker_dss_data = {
- .num_devices = ARRAY_SIZE(omap3_stalker_dss_devices),
- .devices = omap3_stalker_dss_devices,
- .default_device = &omap3_stalker_dvi_device,
+ .default_display_name = "dvi",
};
static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
@@ -209,10 +173,11 @@ static struct regulator_init_data omap3stalker_vsim = {
static struct omap2_hsmmc_info mmc[] = {
{
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
- .gpio_wp = 23,
+ .mmc = 1,
+ .caps = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = 23,
+ .deferred = true,
},
{} /* Terminator */
};
@@ -282,9 +247,8 @@ omap3stalker_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
- omap_mux_init_gpio(23, OMAP_PIN_INPUT);
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
@@ -308,9 +272,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = omap3stalker_twl_gpio_setup,
};
@@ -391,22 +352,23 @@ static int __init omap3_stalker_i2c_init(void)
#define OMAP3_STALKER_TS_GPIO 175
-static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 21,
+ .vcc_gpio = -EINVAL,
+ },
};
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
+ &omap3stalker_tfp410_device,
+ &omap3stalker_dvi_connector_device,
+ &omap3stalker_tv_connector_device,
};
-static struct usbhs_omap_board_data usbhs_bdata __initconst = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 21,
- .reset_gpio_port[2] = -EINVAL,
};
#ifdef CONFIG_OMAP_MUX
@@ -419,11 +381,18 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
static void __init omap3_stalker_init(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
- omap_board_config = omap3_stalker_config;
- omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
+
+ omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+ omap_hsmmc_init(mmc);
omap3_stalker_i2c_init();
@@ -434,7 +403,10 @@ static void __init omap3_stalker_init(void)
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
@@ -456,6 +428,7 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_stalker_init,
- .timer = &omap3_secure_timer,
- .restart = omap_prcm_restart,
+ .init_late = omap35xx_init_late,
+ .init_time = omap3_secure_sync32k_timer_init,
+ .restart = omap3xxx_restart,
MACHINE_END
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 08:29:56 +0000