diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3beagle.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 78 |
1 files changed, 44 insertions, 34 deletions
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 04c11655541..e2e52031f05 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -25,7 +25,7 @@ #include <linux/gpio.h> #include <linux/input.h> #include <linux/gpio_keys.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/cpu.h> #include <linux/mtd/mtd.h> @@ -33,7 +33,6 @@ #include <linux/mtd/nand.h> #include <linux/mmc/host.h> #include <linux/usb/phy.h> -#include <linux/usb/nop-usb-xceiv.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -61,7 +60,8 @@ static struct pwm_lookup pwm_lookup[] = { /* LEDB -> PMU_STAT */ - PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat"), + PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat", + 7812500, PWM_POLARITY_NORMAL), }; static struct led_pwm pwm_leds[] = { @@ -225,35 +225,46 @@ static struct mtd_partition omap3beagle_nand_partitions[] = { /* DSS */ -static struct tfp410_platform_data dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = -1, +static struct connector_dvi_platform_data beagle_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = 3, }; -static struct omap_dss_device beagle_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct platform_device beagle_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &beagle_dvi_connector_pdata, }; -static struct omap_dss_device beagle_tv_device = { +static struct encoder_tfp410_platform_data beagle_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, +}; + +static struct platform_device beagle_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &beagle_tfp410_pdata, +}; + +static struct connector_atv_platform_data beagle_tv_pdata = { .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, }; -static struct omap_dss_device *beagle_dss_devices[] = { - &beagle_dvi_device, - &beagle_tv_device, +static struct platform_device beagle_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &beagle_tv_pdata, }; static struct omap_dss_board_info beagle_dss_data = { - .num_devices = ARRAY_SIZE(beagle_dss_devices), - .devices = beagle_dss_devices, - .default_device = &beagle_dvi_device, + .default_display_name = "dvi", }; #include "sdram-micron-mt46h32m32lf-6.h" @@ -278,18 +289,12 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = { static struct gpio_led gpio_leds[]; -/* PHY's VCC regulator might be added later, so flag that we need it */ -static struct nop_usb_xceiv_platform_data hsusb2_phy_data = { - .needs_vcc = true, -}; - static struct usbhs_phy_data phy_data[] = { { .port = 2, .reset_gpio = 147, .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */ .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */ - .platform_data = &hsusb2_phy_data, }, }; @@ -332,7 +337,11 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; + beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio; + + platform_device_register(&beagle_tfp410_device); + platform_device_register(&beagle_dvi_connector_device); + platform_device_register(&beagle_tv_connector_device); /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */ phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX; @@ -501,17 +510,17 @@ static int __init beagle_opp_init(void) mpu_dev = get_cpu_device(0); iva_dev = omap_device_get_by_hwmod_name("iva"); - if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) { + if (!mpu_dev || IS_ERR(iva_dev)) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", __func__, mpu_dev, iva_dev); return -ENODEV; } /* Enable MPU 1GHz and lower opps */ - r = opp_enable(mpu_dev, 800000000); + r = dev_pm_opp_enable(mpu_dev, 800000000); /* TODO: MPU 1GHz needs SR and ABB */ /* Enable IVA 800MHz and lower opps */ - r |= opp_enable(iva_dev, 660000000); + r |= dev_pm_opp_enable(iva_dev, 660000000); /* TODO: DSP 800MHz needs SR and ABB */ if (r) { pr_err("%s: failed to enable higher opp %d\n", @@ -520,8 +529,8 @@ static int __init beagle_opp_init(void) * Cleanup - disable the higher freqs - we dont care * about the results */ - opp_disable(mpu_dev, 800000000); - opp_disable(iva_dev, 660000000); + dev_pm_opp_disable(mpu_dev, 800000000); + dev_pm_opp_disable(iva_dev, 660000000); } } return 0; @@ -547,6 +556,7 @@ static void __init omap3_beagle_init(void) if (gpio_is_valid(beagle_config.dvi_pd_gpio)) omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); omap_display_init(&beagle_dss_data); + omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); |