diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-ldp.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-ldp.c | 94 |
1 files changed, 42 insertions, 52 deletions
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 0869f4f3d3e..44a59c3abfb 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -28,6 +28,7 @@ #include <linux/io.h> #include <linux/smsc911x.h> #include <linux/mmc/host.h> +#include <linux/usb/phy.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <asm/mach-types.h> @@ -35,12 +36,11 @@ #include <asm/mach/map.h> #include "common.h" -#include "board-zoom.h" #include "gpmc.h" #include "gpmc-smsc911x.h" #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-data.h> #include "board-flash.h" #include "mux.h" @@ -180,52 +180,46 @@ static inline void __init ldp_init_smsc911x(void) /* LCD */ -static int ldp_backlight_gpio; -static int ldp_lcd_enable_gpio; - #define LCD_PANEL_RESET_GPIO 55 #define LCD_PANEL_QVGA_GPIO 56 -static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(ldp_lcd_enable_gpio)) - gpio_direction_output(ldp_lcd_enable_gpio, 1); - if (gpio_is_valid(ldp_backlight_gpio)) - gpio_direction_output(ldp_backlight_gpio, 1); +static const struct display_timing ldp_lcd_videomode = { + .pixelclock = { 0, 5400000, 0 }, - return 0; -} + .hactive = { 0, 240, 0 }, + .hfront_porch = { 0, 3, 0 }, + .hback_porch = { 0, 39, 0 }, + .hsync_len = { 0, 3, 0 }, -static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(ldp_lcd_enable_gpio)) - gpio_direction_output(ldp_lcd_enable_gpio, 0); - if (gpio_is_valid(ldp_backlight_gpio)) - gpio_direction_output(ldp_backlight_gpio, 0); -} + .vactive = { 0, 320, 0 }, + .vfront_porch = { 0, 2, 0 }, + .vback_porch = { 0, 7, 0 }, + .vsync_len = { 0, 1, 0 }, -static struct panel_generic_dpi_data ldp_panel_data = { - .name = "nec_nl2432dr22-11b", - .platform_enable = ldp_panel_enable_lcd, - .platform_disable = ldp_panel_disable_lcd, + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct omap_dss_device ldp_lcd_device = { - .name = "lcd", - .driver_name = "generic_dpi_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 18, - .data = &ldp_panel_data, +static struct panel_dpi_platform_data ldp_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 18, + + .display_timing = &ldp_lcd_videomode, + + .enable_gpio = -1, /* filled in code */ + .backlight_gpio = -1, /* filled in code */ }; -static struct omap_dss_device *ldp_dss_devices[] = { - &ldp_lcd_device, +static struct platform_device ldp_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &ldp_lcd_pdata, }; static struct omap_dss_board_info ldp_dss_data = { - .num_devices = ARRAY_SIZE(ldp_dss_devices), - .devices = ldp_dss_devices, - .default_device = &ldp_lcd_device, + .default_display_name = "lcd", }; static void __init ldp_display_init(void) @@ -248,23 +242,17 @@ static void __init ldp_display_init(void) static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; + int res; - struct gpio gpios[] = { - {gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"}, - {gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"}, - }; + /* LCD enable GPIO */ + ldp_lcd_pdata.enable_gpio = gpio + 7; - r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); - if (r) { - pr_err("Cannot request LCD GPIOs, error %d\n", r); - ldp_backlight_gpio = -EINVAL; - ldp_lcd_enable_gpio = -EINVAL; - return r; - } + /* Backlight enable GPIO */ + ldp_lcd_pdata.backlight_gpio = gpio + 15; - ldp_backlight_gpio = gpio + 15; - ldp_lcd_enable_gpio = gpio + 7; + res = platform_device_register(&ldp_lcd_device); + if (res) + pr_err("Unable to register LCD: %d\n", res); return 0; } @@ -314,7 +302,8 @@ static struct regulator_init_data ldp_vaux1 = { static struct regulator_consumer_supply ldp_vpll2_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; static struct regulator_init_data ldp_vpll2 = { @@ -418,9 +407,10 @@ static void __init omap_ldp_init(void) omap_ads7846_init(1, 54, 310, NULL); omap_serial_init(); omap_sdrc_init(NULL, NULL); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), - ZOOM_NAND_CS, 0, nand_default_timings); + 0, 0, nand_default_timings); omap_hsmmc_init(mmc); ldp_display_init(); @@ -435,6 +425,6 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap_ldp_init, .init_late = omap3430_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END |