1 files changed, 130 insertions, 285 deletions

diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 067f4379c87..cdc4fb9960a 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -29,38 +29,35 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
-
-#include <mach/hardware.h>
-#include <mach/id.h>
+#include "id.h"
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <plat/board.h>
-#include <plat/common.h>
-#include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/usb.h>
-#include <plat/display.h>
+#include "common.h"
+#include "gpmc.h"
+#include <linux/platform_data/mtd-nand-omap2.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
 
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
 #include <linux/dm9000.h>
 #include <linux/interrupt.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
-
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
+#include "board-flash.h"
+#include "common-board-devices.h"
 
-#define NAND_BLOCK_SIZE		SZ_128K
+#define	NAND_CS			0
 
 #define OMAP_DM9000_GPIO_IRQ	25
 #define OMAP3_DEVKIT_TS_GPIO	27
@@ -96,108 +93,101 @@ static struct mtd_partition devkit8000_nand_partitions[] = {
 	},
 };
 
-static struct omap_nand_platform_data devkit8000_nand_data = {
-	.options	= NAND_BUSWIDTH_16,
-	.parts		= devkit8000_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(devkit8000_nand_partitions),
-	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 29,
+		.deferred	= true,
 	},
 	{}	/* Terminator */
 };
 
-static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
-	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
+static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
 
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 1);
-	return 0;
-}
+/* ads7846 on SPI */
+static struct regulator_consumer_supply devkit8000_vio_supply[] = {
+	REGULATOR_SUPPLY("vcc", "spi2.0"),
+};
 
-static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 0);
-}
+static const struct display_timing devkit8000_lcd_videomode = {
+	.pixelclock	= { 0, 40000000, 0 },
 
-static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 1);
-	return 0;
-}
+	.hactive = { 0, 800, 0 },
+	.hfront_porch = { 0, 1, 0 },
+	.hback_porch = { 0, 1, 0 },
+	.hsync_len = { 0, 48, 0 },
 
-static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 0);
-}
+	.vactive = { 0, 480, 0 },
+	.vfront_porch = { 0, 12, 0 },
+	.vback_porch = { 0, 25, 0 },
+	.vsync_len = { 0, 3, 0 },
 
-static struct regulator_consumer_supply devkit8000_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
+};
 
+static struct panel_dpi_platform_data devkit8000_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
 
-/* ads7846 on SPI */
-static struct regulator_consumer_supply devkit8000_vio_supply =
-	REGULATOR_SUPPLY("vcc", "spi2.0");
+	.data_lines		= 24,
 
-static struct omap_dss_device devkit8000_lcd_device = {
-	.name                   = "lcd",
-	.driver_name            = "generic_panel",
-	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines     = 24,
-	.reset_gpio             = -EINVAL, /* will be replaced */
-	.platform_enable        = devkit8000_panel_enable_lcd,
-	.platform_disable       = devkit8000_panel_disable_lcd,
-};
-static struct omap_dss_device devkit8000_dvi_device = {
+	.display_timing		= &devkit8000_lcd_videomode,
+
+	.enable_gpio		= -1,	/* filled in code */
+	.backlight_gpio		= -1,
+};
+
+static struct platform_device devkit8000_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_lcd_pdata,
+};
+
+static struct connector_dvi_platform_data devkit8000_dvi_connector_pdata = {
 	.name                   = "dvi",
-	.driver_name            = "generic_panel",
-	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines     = 24,
-	.reset_gpio             = -EINVAL, /* will be replaced */
-	.platform_enable        = devkit8000_panel_enable_dvi,
-	.platform_disable       = devkit8000_panel_disable_dvi,
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 1,
 };
 
-static struct omap_dss_device devkit8000_tv_device = {
-	.name                   = "tv",
-	.driver_name            = "venc",
-	.type                   = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct platform_device devkit8000_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_dvi_connector_pdata,
 };
 
+static struct encoder_tfp410_platform_data devkit8000_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,	/* filled in code */
+};
 
-static struct omap_dss_device *devkit8000_dss_devices[] = {
-	&devkit8000_lcd_device,
-	&devkit8000_dvi_device,
-	&devkit8000_tv_device,
+static struct platform_device devkit8000_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_tfp410_pdata,
 };
 
-static struct omap_dss_board_info devkit8000_dss_data = {
-	.num_devices = ARRAY_SIZE(devkit8000_dss_devices),
-	.devices = devkit8000_dss_devices,
-	.default_device = &devkit8000_lcd_device,
+static struct connector_atv_platform_data devkit8000_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct platform_device devkit8000_dss_device = {
-	.name		= "omapdss",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &devkit8000_dss_data,
-	},
+static struct platform_device devkit8000_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_tv_pdata,
 };
 
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+static struct omap_dss_board_info devkit8000_dss_data = {
+	.default_display_name = "lcd",
+};
 
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_1),
@@ -237,45 +227,34 @@ static struct gpio_led gpio_leds[];
 static int devkit8000_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
-	omap_mux_init_gpio(29, OMAP_PIN_INPUT);
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
-
-	/* link regulators to MMC adapters */
-	devkit8000_vmmc1_supply.dev = mmc[0].dev;
+	omap_hsmmc_late_init(mmc);
 
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
-        /* gpio + 1 is "LCD_PWREN" (out, active high) */
-	devkit8000_lcd_device.reset_gpio = gpio + 1;
-	gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
-	/* Disable until needed */
-	gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+	/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
+	devkit8000_lcd_pdata.enable_gpio = gpio + TWL4030_GPIO_MAX + 0;
 
 	/* gpio + 7 is "DVI_PD" (out, active low) */
-	devkit8000_dvi_device.reset_gpio = gpio + 7;
-	gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
-	/* Disable until needed */
-	gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
+	devkit8000_tfp410_pdata.power_down_gpio = gpio + 7;
 
 	return 0;
 }
 
 static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
-	.pullups	= BIT(1),
-	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(15) | BIT(16) | BIT(17),
 	.setup		= devkit8000_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply devkit8000_vpll1_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
+};
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data devkit8000_vmmc1 = {
@@ -288,22 +267,8 @@ static struct regulator_init_data devkit8000_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vmmc1_supply,
-};
-
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data devkit8000_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vdda_dac_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vmmc1_supply),
+	.consumer_supplies	= devkit8000_vmmc1_supply,
 };
 
 /* VPLL1 for digital video outputs */
@@ -316,8 +281,8 @@ static struct regulator_init_data devkit8000_vpll1 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vpll1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vpll1_supplies),
+	.consumer_supplies	= devkit8000_vpll1_supplies,
 };
 
 /* VAUX4 for ads7846 and nubs */
@@ -331,51 +296,25 @@ static struct regulator_init_data devkit8000_vio = {
 		.valid_ops_mask         = REGULATOR_CHANGE_MODE
 			| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &devkit8000_vio_supply,
-};
-
-static struct twl4030_usb_data devkit8000_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data devkit8000_audio_data = {
-	.audio_mclk = 26000000,
-};
-
-static struct twl4030_codec_data devkit8000_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &devkit8000_audio_data,
+	.num_consumer_supplies  = ARRAY_SIZE(devkit8000_vio_supply),
+	.consumer_supplies      = devkit8000_vio_supply,
 };
 
 static struct twl4030_platform_data devkit8000_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.usb		= &devkit8000_usb_data,
 	.gpio		= &devkit8000_gpio_data,
-	.codec		= &devkit8000_codec_data,
 	.vmmc1		= &devkit8000_vmmc1,
-	.vdac		= &devkit8000_vdac,
 	.vpll1		= &devkit8000_vpll1,
 	.vio		= &devkit8000_vio,
 	.keypad		= &devkit8000_kp_data,
 };
 
-static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("tps65930", 0x48),
-		.flags = I2C_CLIENT_WAKE,
-		.irq = INT_34XX_SYS_NIRQ,
-		.platform_data = &devkit8000_twldata,
-	},
-};
-
 static int __init devkit8000_i2c_init(void)
 {
-	omap_register_i2c_bus(1, 2600, devkit8000_i2c_boardinfo,
-			ARRAY_SIZE(devkit8000_i2c_boardinfo));
+	omap3_pmic_get_config(&devkit8000_twldata,
+			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			  TWL_COMMON_REGULATOR_VDAC);
+	omap3_pmic_init("tps65930", &devkit8000_twldata);
 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
 	 * projector don't work reliably with 400kHz */
 	omap_register_i2c_bus(3, 400, NULL, 0);
@@ -444,68 +383,6 @@ static struct platform_device keys_gpio = {
 	},
 };
 
-
-static void __init devkit8000_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
-	omap_gpio_init();
-}
-
-static void __init devkit8000_ads7846_init(void)
-{
-	int gpio = OMAP3_DEVKIT_TS_GPIO;
-	int ret;
-
-	ret = gpio_request(gpio, "ads7846_pen_down");
-	if (ret < 0) {
-		printk(KERN_ERR "Failed to request GPIO %d for "
-				"ads7846 pen down IRQ\n", gpio);
-		return;
-	}
-
-	gpio_direction_input(gpio);
-}
-
-static int ads7846_get_pendown_state(void)
-{
-	return !gpio_get_value(OMAP3_DEVKIT_TS_GPIO);
-}
-
-static struct ads7846_platform_data ads7846_config = {
-	.x_max                  = 0x0fff,
-	.y_max                  = 0x0fff,
-	.x_plate_ohms           = 180,
-	.pressure_max           = 255,
-	.debounce_max           = 10,
-	.debounce_tol           = 5,
-	.debounce_rep           = 1,
-	.get_pendown_state	= ads7846_get_pendown_state,
-	.keep_vref_on		= 1,
-	.settle_delay_usecs     = 150,
-};
-
-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
-	.turbo_mode	= 0,
-	.single_channel	= 1,	/* 0: slave, 1: master */
-};
-
-static struct spi_board_info devkit8000_spi_board_info[] __initdata = {
-	{
-		.modalias		= "ads7846",
-		.bus_num		= 2,
-		.chip_select		= 0,
-		.max_speed_hz		= 1500000,
-		.controller_data	= &ads7846_mcspi_config,
-		.irq			= OMAP_GPIO_IRQ(OMAP3_DEVKIT_TS_GPIO),
-		.platform_data		= &ads7846_config,
-	}
-};
-
 #define OMAP_DM9000_BASE	0x2c000000
 
 static struct resource omap_dm9000_resources[] = {
@@ -520,7 +397,6 @@ static struct resource omap_dm9000_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	[2] = {
-		.start		= OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ),
 		.flags		= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
@@ -543,14 +419,14 @@ static void __init omap_dm9000_init(void)
 {
 	unsigned char *eth_addr = omap_dm9000_platdata.dev_addr;
 	struct omap_die_id odi;
+	int ret;
 
-	if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) {
+	ret = gpio_request_one(OMAP_DM9000_GPIO_IRQ, GPIOF_IN, "dm9000 irq");
+	if (ret < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
 			OMAP_DM9000_GPIO_IRQ);
 		return;
-		}
-
-	gpio_direction_input(OMAP_DM9000_GPIO_IRQ);
+	}
 
 	/* init the mac address using DIE id */
 	omap_get_die_id(&odi);
@@ -564,63 +440,20 @@ static void __init omap_dm9000_init(void)
 }
 
 static struct platform_device *devkit8000_devices[] __initdata = {
-	&devkit8000_dss_device,
 	&leds_gpio,
 	&keys_gpio,
 	&omap_dm9000_dev,
+	&devkit8000_lcd_device,
+	&devkit8000_tfp410_device,
+	&devkit8000_dvi_connector_device,
+	&devkit8000_tv_connector_device,
 };
 
-static void __init devkit8000_flash_init(void)
-{
-	u8 cs = 0;
-	u8 nandcs = GPMC_CS_NUM + 1;
-
-	/* find out the chip-select on which NAND exists */
-	while (cs < GPMC_CS_NUM) {
-		u32 ret = 0;
-		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-		if ((ret & 0xC00) == 0x800) {
-			printk(KERN_INFO "Found NAND on CS%d\n", cs);
-			if (nandcs > GPMC_CS_NUM)
-				nandcs = cs;
-		}
-		cs++;
-	}
-
-	if (nandcs > GPMC_CS_NUM) {
-		printk(KERN_INFO "NAND: Unable to find configuration "
-				 "in GPMC\n ");
-		return;
-	}
-
-	if (nandcs < GPMC_CS_NUM) {
-		devkit8000_nand_data.cs = nandcs;
-
-		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (gpmc_nand_init(&devkit8000_nand_data) < 0)
-			printk(KERN_ERR "Unable to register NAND device\n");
-	}
-}
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_OTG,
-	.power			= 100,
-};
-
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 };
 
+#ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* nCS and IRQ for Devkit8000 ethernet */
 	OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0),
@@ -774,26 +607,34 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
+#endif
 
 static void __init devkit8000_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 
 	omap_dm9000_init();
 
+	omap_hsmmc_init(mmc);
 	devkit8000_i2c_init();
+	omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ);
 	platform_add_devices(devkit8000_devices,
 			ARRAY_SIZE(devkit8000_devices));
 
-	spi_register_board_info(devkit8000_spi_board_info,
-	ARRAY_SIZE(devkit8000_spi_board_info));
+	omap_display_init(&devkit8000_dss_data);
 
-	devkit8000_ads7846_init();
+	omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL);
 
-	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
-	devkit8000_flash_init();
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	usb_musb_init(NULL);
+	usbhs_init(&usbhs_bdata);
+	board_nand_init(devkit8000_nand_partitions,
+			ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
+			NAND_BUSWIDTH_16, NULL);
+	omap_twl4030_audio_init("omap3beagle", NULL);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
@@ -801,10 +642,14 @@ static void __init devkit8000_init(void)
 }
 
 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
-	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
-	.init_irq	= devkit8000_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap35xx_init_early,
+	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= devkit8000_init,
-	.timer		= &omap_timer,
+	.init_late	= omap35xx_init_late,
+	.init_time	= omap3_secure_sync32k_timer_init,
+	.restart	= omap3xxx_restart,
 MACHINE_END