diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-devkit8000.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-devkit8000.c | 188 |
1 files changed, 88 insertions, 100 deletions
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e873063f4fd..cdc4fb9960a 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -29,38 +29,36 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/mmc/host.h> +#include <linux/usb/phy.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> - -#include <mach/hardware.h> -#include <mach/id.h> +#include "id.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <plat/board.h> #include "common.h" -#include <plat/gpmc.h> -#include <plat/nand.h> -#include <plat/usb.h> +#include "gpmc.h" +#include <linux/platform_data/mtd-nand-omap2.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-data.h> -#include <plat/mcspi.h> +#include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/dm9000.h> #include <linux/interrupt.h> #include "sdram-micron-mt46h32m32lf-6.h" - #include "mux.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + #define OMAP_DM9000_GPIO_IRQ 25 #define OMAP3_DEVKIT_TS_GPIO 27 @@ -100,36 +98,11 @@ static struct omap2_hsmmc_info mmc[] = { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 29, + .deferred = true, }, {} /* Terminator */ }; -static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 1); - return 0; -} - -static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 0); -} - -static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 1); - return 0; -} - -static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 0); -} - static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -139,51 +112,81 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = { REGULATOR_SUPPLY("vcc", "spi2.0"), }; -static struct panel_generic_dpi_data lcd_panel = { - .name = "innolux_at070tn83", - .platform_enable = devkit8000_panel_enable_lcd, - .platform_disable = devkit8000_panel_disable_lcd, +static const struct display_timing devkit8000_lcd_videomode = { + .pixelclock = { 0, 40000000, 0 }, + + .hactive = { 0, 800, 0 }, + .hfront_porch = { 0, 1, 0 }, + .hback_porch = { 0, 1, 0 }, + .hsync_len = { 0, 48, 0 }, + + .vactive = { 0, 480, 0 }, + .vfront_porch = { 0, 12, 0 }, + .vback_porch = { 0, 25, 0 }, + .vsync_len = { 0, 3, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct omap_dss_device devkit8000_lcd_device = { +static struct panel_dpi_platform_data devkit8000_lcd_pdata = { .name = "lcd", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", - .data = &lcd_panel, - .phy.dpi.data_lines = 24, + .source = "dpi.0", + + .data_lines = 24, + + .display_timing = &devkit8000_lcd_videomode, + + .enable_gpio = -1, /* filled in code */ + .backlight_gpio = -1, }; -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = devkit8000_panel_enable_dvi, - .platform_disable = devkit8000_panel_disable_dvi, +static struct platform_device devkit8000_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &devkit8000_lcd_pdata, }; -static struct omap_dss_device devkit8000_dvi_device = { +static struct connector_dvi_platform_data devkit8000_dvi_connector_pdata = { .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, + .source = "tfp410.0", + .i2c_bus_num = 1, +}; + +static struct platform_device devkit8000_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &devkit8000_dvi_connector_pdata, }; -static struct omap_dss_device devkit8000_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct encoder_tfp410_platform_data devkit8000_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, /* filled in code */ }; +static struct platform_device devkit8000_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &devkit8000_tfp410_pdata, +}; -static struct omap_dss_device *devkit8000_dss_devices[] = { - &devkit8000_lcd_device, - &devkit8000_dvi_device, - &devkit8000_tv_device, +static struct connector_atv_platform_data devkit8000_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, +}; + +static struct platform_device devkit8000_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &devkit8000_tv_pdata, }; static struct omap_dss_board_info devkit8000_dss_data = { - .num_devices = ARRAY_SIZE(devkit8000_dss_devices), - .devices = devkit8000_dss_devices, - .default_device = &devkit8000_lcd_device, + .default_display_name = "lcd", }; static uint32_t board_keymap[] = { @@ -224,40 +227,23 @@ static struct gpio_led gpio_leds[]; static int devkit8000_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int ret; - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); + omap_hsmmc_late_init(mmc); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; - ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, - GPIOF_OUT_INIT_LOW, "LCD_PWREN"); - if (ret < 0) { - devkit8000_lcd_device.reset_gpio = -EINVAL; - printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); - } + devkit8000_lcd_pdata.enable_gpio = gpio + TWL4030_GPIO_MAX + 0; /* gpio + 7 is "DVI_PD" (out, active low) */ - devkit8000_dvi_device.reset_gpio = gpio + 7; - ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, - GPIOF_OUT_INIT_LOW, "DVI PowerDown"); - if (ret < 0) { - devkit8000_dvi_device.reset_gpio = -EINVAL; - printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); - } + devkit8000_tfp410_pdata.power_down_gpio = gpio + 7; return 0; } static struct twl4030_gpio_platform_data devkit8000_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(15) | BIT(16) | BIT(17), @@ -266,6 +252,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = { static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; @@ -410,7 +397,6 @@ static struct resource omap_dm9000_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -457,18 +443,14 @@ static struct platform_device *devkit8000_devices[] __initdata = { &leds_gpio, &keys_gpio, &omap_dm9000_dev, + &devkit8000_lcd_device, + &devkit8000_tfp410_device, + &devkit8000_dvi_connector_device, + &devkit8000_tv_connector_device, }; -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -636,7 +618,9 @@ static void __init devkit8000_init(void) omap_dm9000_init(); + omap_hsmmc_init(mmc); devkit8000_i2c_init(); + omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ); platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); @@ -644,10 +628,13 @@ static void __init devkit8000_init(void) omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, - ARRAY_SIZE(devkit8000_nand_partitions)); + board_nand_init(devkit8000_nand_partitions, + ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); + omap_twl4030_audio_init("omap3beagle", NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); @@ -662,6 +649,7 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .init_irq = omap3_init_irq, .handle_irq = omap3_intc_handle_irq, .init_machine = devkit8000_init, - .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .init_late = omap35xx_init_late, + .init_time = omap3_secure_sync32k_timer_init, + .restart = omap3xxx_restart, MACHINE_END |