1 files changed, 170 insertions, 274 deletions

diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index af383a87694..4f9383cecf7 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -18,119 +18,29 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/can/platform/ti_hecc.h>
 #include <linux/davinci_emac.h>
+#include <linux/mmc/host.h>
+#include <linux/usb/musb.h>
+#include <linux/platform_data/gpio-omap.h>
 
-#include <mach/hardware.h>
-#include <mach/am35xx.h>
+#include "am35xx.h"
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
-#include <plat/common.h>
-#include <plat/control.h>
-#include <plat/usb.h>
-#include <plat/display.h>
+#include "common.h"
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
 
+#include "am35xx-emac.h"
 #include "mux.h"
-
-#define AM35XX_EVM_PHY_MASK		(0xF)
-#define AM35XX_EVM_MDIO_FREQUENCY	(1000000)
-
-static struct emac_platform_data am3517_evm_emac_pdata = {
-	.phy_mask	= AM35XX_EVM_PHY_MASK,
-	.mdio_max_freq	= AM35XX_EVM_MDIO_FREQUENCY,
-	.rmii_en	= 1,
-};
-
-static struct resource am3517_emac_resources[] = {
-	{
-		.start  = AM35XX_IPSS_EMAC_BASE,
-		.end    = AM35XX_IPSS_EMAC_BASE + 0x3FFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.start  = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
-		.end    = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		.start  = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
-		.end    = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		.start  = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
-		.end    = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		.start  = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
-		.end    = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device am3517_emac_device = {
-	.name		= "davinci_emac",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(am3517_emac_resources),
-	.resource	= am3517_emac_resources,
-};
-
-static void am3517_enable_ethernet_int(void)
-{
-	u32 regval;
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
-		AM35XX_CPGMAC_C0_TX_PULSE_CLR |
-		AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
-		AM35XX_CPGMAC_C0_RX_THRESH_CLR);
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-}
-
-static void am3517_disable_ethernet_int(void)
-{
-	u32 regval;
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
-		AM35XX_CPGMAC_C0_TX_PULSE_CLR);
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-}
-
-void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
-{
-	unsigned int regval;
-
-	pdata->ctrl_reg_offset		= AM35XX_EMAC_CNTRL_OFFSET;
-	pdata->ctrl_mod_reg_offset	= AM35XX_EMAC_CNTRL_MOD_OFFSET;
-	pdata->ctrl_ram_offset		= AM35XX_EMAC_CNTRL_RAM_OFFSET;
-	pdata->mdio_reg_offset		= AM35XX_EMAC_MDIO_OFFSET;
-	pdata->ctrl_ram_size		= AM35XX_EMAC_CNTRL_RAM_SIZE;
-	pdata->version			= EMAC_VERSION_2;
-	pdata->hw_ram_addr		= AM35XX_EMAC_HW_RAM_ADDR;
-	pdata->interrupt_enable		= am3517_enable_ethernet_int;
-	pdata->interrupt_disable	= am3517_disable_ethernet_int;
-	am3517_emac_device.dev.platform_data	= pdata;
-	platform_device_register(&am3517_emac_device);
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-	regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
-	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-
-	return ;
-}
-
-
+#include "control.h"
+#include "hsmmc.h"
 
 #define LCD_PANEL_PWR		176
 #define LCD_PANEL_BKLIGHT_PWR	182
@@ -139,7 +49,6 @@ void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
 static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = {
 	{
 		I2C_BOARD_INFO("s35390a", 0x30),
-		.type		= "s35390a",
 	},
 };
 
@@ -153,19 +62,14 @@ static void __init am3517_evm_rtc_init(void)
 	int r;
 
 	omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP);
-	r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq");
+
+	r = gpio_request_one(GPIO_RTCS35390A_IRQ, GPIOF_IN, "rtcs35390a-irq");
 	if (r < 0) {
 		printk(KERN_WARNING "failed to request GPIO#%d\n",
 				GPIO_RTCS35390A_IRQ);
 		return;
 	}
-	r = gpio_direction_input(GPIO_RTCS35390A_IRQ);
-	if (r < 0) {
-		printk(KERN_WARNING "GPIO#%d cannot be configured as input\n",
-				GPIO_RTCS35390A_IRQ);
-		gpio_free(GPIO_RTCS35390A_IRQ);
-		return;
-	}
+
 	am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
 }
 
@@ -179,6 +83,9 @@ static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
 };
 static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = {
 	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1A),
+	},
+	{
 		I2C_BOARD_INFO("tca6416", 0x21),
 		.platform_data = &am3517evm_gpio_expander_info_0,
 	},
@@ -213,190 +120,157 @@ static int __init am3517_evm_i2c_init(void)
 	return 0;
 }
 
-static int lcd_enabled;
-static int dvi_enabled;
+static const struct display_timing am3517_evm_lcd_videomode = {
+	.pixelclock	= { 0, 9000000, 0 },
 
-#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
-		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-static void __init am3517_evm_display_init(void)
-{
-	int r;
+	.hactive = { 0, 480, 0 },
+	.hfront_porch = { 0, 3, 0 },
+	.hback_porch = { 0, 2, 0 },
+	.hsync_len = { 0, 42, 0 },
 
-	omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN);
-	omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN);
-	/*
-	 * Enable GPIO 182 = LCD Backlight Power
-	 */
-	r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr");
-	if (r) {
-		printk(KERN_ERR "failed to get lcd_backlight_pwr\n");
-		return;
-	}
-	gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1);
-	/*
-	 * Enable GPIO 181 = LCD Panel PWM
-	 */
-	r = gpio_request(LCD_PANEL_PWM, "lcd_pwm");
-	if (r) {
-		printk(KERN_ERR "failed to get lcd_pwm\n");
-		goto err_1;
-	}
-	gpio_direction_output(LCD_PANEL_PWM, 1);
-	/*
-	 * Enable GPIO 176 = LCD Panel Power enable pin
-	 */
-	r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr");
-	if (r) {
-		printk(KERN_ERR "failed to get lcd_panel_pwr\n");
-		goto err_2;
-	}
-	gpio_direction_output(LCD_PANEL_PWR, 1);
+	.vactive = { 0, 272, 0 },
+	.vfront_porch = { 0, 3, 0 },
+	.vback_porch = { 0, 2, 0 },
+	.vsync_len = { 0, 11, 0 },
 
-	printk(KERN_INFO "Display initialized successfully\n");
-	return;
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_LOW | DISPLAY_FLAGS_PIXDATA_POSEDGE,
+};
 
-err_2:
-	gpio_free(LCD_PANEL_PWM);
-err_1:
-	gpio_free(LCD_PANEL_BKLIGHT_PWR);
-}
-#else
-static void __init am3517_evm_display_init(void) {}
-#endif
+static struct panel_dpi_platform_data am3517_evm_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
 
-static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-	gpio_set_value(LCD_PANEL_PWR, 1);
-	lcd_enabled = 1;
+	.data_lines		= 16,
 
-	return 0;
-}
-
-static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(LCD_PANEL_PWR, 0);
-	lcd_enabled = 0;
-}
+	.display_timing		= &am3517_evm_lcd_videomode,
 
-static struct omap_dss_device am3517_evm_lcd_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "lcd",
-	.driver_name		= "sharp_lq_panel",
-	.phy.dpi.data_lines 	= 16,
-	.platform_enable	= am3517_evm_panel_enable_lcd,
-	.platform_disable	= am3517_evm_panel_disable_lcd,
+	.enable_gpio		= LCD_PANEL_PWR,
+	.backlight_gpio		= LCD_PANEL_BKLIGHT_PWR,
 };
 
-static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
+static struct platform_device am3517_evm_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_lcd_pdata,
+};
 
-static struct omap_dss_device am3517_evm_tv_device = {
-	.type 			= OMAP_DISPLAY_TYPE_VENC,
-	.name 			= "tv",
-	.driver_name		= "venc",
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable	= am3517_evm_panel_enable_tv,
-	.platform_disable	= am3517_evm_panel_disable_tv,
+static struct connector_dvi_platform_data am3517_evm_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
 };
 
-static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-	dvi_enabled = 1;
+static struct platform_device am3517_evm_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_dvi_connector_pdata,
+};
 
-	return 0;
-}
+static struct encoder_tfp410_platform_data am3517_evm_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
+};
 
-static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	dvi_enabled = 0;
-}
+static struct platform_device am3517_evm_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_tfp410_pdata,
+};
 
-static struct omap_dss_device am3517_evm_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "generic_panel",
-	.phy.dpi.data_lines	= 24,
-	.platform_enable	= am3517_evm_panel_enable_dvi,
-	.platform_disable	= am3517_evm_panel_disable_dvi,
+static struct connector_atv_platform_data am3517_evm_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device *am3517_evm_dss_devices[] = {
-	&am3517_evm_lcd_device,
-	&am3517_evm_tv_device,
-	&am3517_evm_dvi_device,
+static struct platform_device am3517_evm_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_tv_pdata,
 };
 
 static struct omap_dss_board_info am3517_evm_dss_data = {
-	.num_devices	= ARRAY_SIZE(am3517_evm_dss_devices),
-	.devices	= am3517_evm_dss_devices,
-	.default_device	= &am3517_evm_lcd_device,
+	.default_display_name = "lcd",
 };
 
-struct platform_device am3517_evm_dss_device = {
-	.name		= "omapdss",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &am3517_evm_dss_data,
-	},
-};
+static void __init am3517_evm_display_init(void)
+{
+	gpio_request_one(LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd panel pwm");
+
+	omap_display_init(&am3517_evm_dss_data);
+
+	platform_device_register(&am3517_evm_tfp410_device);
+	platform_device_register(&am3517_evm_dvi_connector_device);
+	platform_device_register(&am3517_evm_lcd_device);
+	platform_device_register(&am3517_evm_tv_connector_device);
+}
 
 /*
  * Board initialization
  */
-static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
-};
 
-static struct platform_device *am3517_evm_devices[] __initdata = {
-	&am3517_evm_dss_device,
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type         = MUSB_INTERFACE_ULPI,
+	.mode                   = MUSB_OTG,
+	.power                  = 500,
+	.set_phy_power		= am35x_musb_phy_power,
+	.clear_irq		= am35x_musb_clear_irq,
+	.set_mode		= am35x_set_mode,
+	.reset			= am35x_musb_reset,
 };
 
-static void __init am3517_evm_init_irq(void)
+static __init void am3517_evm_musb_init(void)
 {
-	omap_board_config = am3517_evm_config;
-	omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
+	u32 devconf2;
+
+	/*
+	 * Set up USB clock/mode in the DEVCONF2 register.
+	 */
+	devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
 
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
+	/* USB2.0 PHY reference clock is 13 MHz */
+	devconf2 &= ~(CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE);
+	devconf2 |=  CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | CONF2_VBDTCTEN
+			| CONF2_DATPOL;
+
+	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+
+	usb_musb_init(&musb_board_data);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
-		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-#else
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-#endif
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static __init void am3517_evm_mcbsp1_init(void)
+{
+	u32 devconf0;
+
+	/* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */
+	devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	devconf0 |=  OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK;
+	omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
+}
+
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 1,
+		.reset_gpio = 57,
+		.vcc_gpio = -EINVAL,
+	},
+};
 
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = 57,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 };
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* USB OTG DRVVBUS offset = 0x212 */
+	OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 
@@ -407,8 +281,7 @@ static struct resource am3517_hecc_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_35XX_HECC0_IRQ,
-		.end	= INT_35XX_HECC0_IRQ,
+		.start	= 24 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -435,22 +308,39 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
 	platform_device_register(&am3517_hecc_device);
 }
 
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd	= 127,
+		.gpio_wp	= 126,
+	},
+	{
+		.mmc		= 2,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd	= 128,
+		.gpio_wp	= 129,
+	},
+	{}      /* Terminator */
+};
+
 static void __init am3517_evm_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
 	am3517_evm_i2c_init();
-	platform_add_devices(am3517_evm_devices,
-				ARRAY_SIZE(am3517_evm_devices));
+
+	am3517_evm_display_init();
 
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 
 	/* Configure GPIO for EHCI port */
 	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
-	usb_ehci_init(&ehci_pdata);
+
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
+	usbhs_init(&usbhs_bdata);
 	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
-	/* DSS */
-	am3517_evm_display_init();
 
 	/* RTC - S35390A */
 	am3517_evm_rtc_init();
@@ -458,21 +348,27 @@ static void __init am3517_evm_init(void)
 	i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
 				ARRAY_SIZE(am3517evm_i2c1_boardinfo));
 	/*Ethernet*/
-	am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
-}
+	am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
 
-static void __init am3517_evm_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
+	/* MUSB */
+	am3517_evm_musb_init();
+
+	/* McBSP1 */
+	am3517_evm_mcbsp1_init();
+
+	/* MMC init function */
+	omap_hsmmc_init(mmc);
 }
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
-	.boot_params	= 0x80000100,
-	.map_io		= am3517_evm_map_io,
-	.init_irq	= am3517_evm_init_irq,
+	.atag_offset	= 0x100,
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= am35xx_init_early,
+	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_evm_init,
-	.timer		= &omap_timer,
+	.init_late	= am35xx_init_late,
+	.init_time	= omap3_sync32k_timer_init,
+	.restart	= omap3xxx_restart,
 MACHINE_END