1 files changed, 81 insertions, 47 deletions

diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 71acb5ab281..0d499a1878f 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -20,62 +20,103 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/mfd/tps65910.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
-#include <plat/common.h>
-#include <plat/usb.h>
+#include "common.h"
+#include "common-board-devices.h"
+#include "board-flash.h"
 
+#include "am35xx-emac.h"
 #include "mux.h"
 #include "control.h"
 
 #define GPIO_USB_POWER		35
 #define GPIO_USB_NRESET		38
 
-
-/* Board initialization */
-static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
-};
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
-static void __init am3517_crane_init_irq(void)
-{
-	omap_board_config = am3517_crane_config;
-	omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 1,
+		.reset_gpio = GPIO_USB_NRESET,
+		.vcc_gpio = GPIO_USB_POWER,
+		.vcc_polarity = 1,
+	},
+};
 
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
-}
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+};
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct mtd_partition crane_nand_partitions[] = {
+	{
+		.name		= "X-Loader",
+		.offset		= 0,
+		.size		= 4 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "U-Boot",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 14 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "U-Boot Env",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 40 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "File System",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
 
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = GPIO_USB_NRESET,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL
+static struct tps65910_board tps65910_pdata = {
+	.irq = 7 + OMAP_INTC_START,
+	.en_ck32k_xtal = true,
 };
 
-static void __init am3517_crane_init(void)
+static struct i2c_board_info __initdata tps65910_board_info[] = {
+	{
+		I2C_BOARD_INFO("tps65910", 0x2d),
+		.platform_data = &tps65910_pdata,
+	},
+};
+
+static void __init am3517_crane_i2c_init(void)
 {
-	int ret;
+	omap_register_i2c_bus(1, 2600, tps65910_board_info,
+			ARRAY_SIZE(tps65910_board_info));
+}
 
+static void __init am3517_crane_init(void)
+{
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
+	board_nand_init(crane_nand_partitions,
+			ARRAY_SIZE(crane_nand_partitions), 0,
+			NAND_BUSWIDTH_16, NULL);
+	am3517_crane_i2c_init();
 
 	/* Configure GPIO for EHCI port */
 	if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
@@ -90,27 +131,20 @@ static void __init am3517_crane_init(void)
 		return;
 	}
 
-	ret = gpio_request(GPIO_USB_POWER, "usb_ehci_enable");
-	if (ret < 0) {
-		pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
-		return;
-	}
-
-	ret = gpio_direction_output(GPIO_USB_POWER, 1);
-	if (ret < 0) {
-		gpio_free(GPIO_USB_POWER);
-		pr_err("Unable to initialize EHCI power\n");
-		return;
-	}
-
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
+	usbhs_init(&usbhs_bdata);
+	am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
 }
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
-	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
-	.init_irq	= am3517_crane_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= am35xx_init_early,
+	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_crane_init,
-	.timer		= &omap_timer,
+	.init_late	= am35xx_init_late,
+	.init_time	= omap3_sync32k_timer_init,
+	.restart	= omap3xxx_restart,
 MACHINE_END