1 files changed, 0 insertions, 113 deletions
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
deleted file mode 100755
index 73905963281..00000000000
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <plat/common.h>
-#include <plat/board.h>
-#include <plat/gpmc-smc91x.h>
-#include <plat/mux.h>
-#include <plat/usb.h>
-
-#include <mach/board-zoom.h>
-
-#include "mux.h"
-#include "sdram-hynix-h8mbx00u0mer-0em.h"
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
-	.cs             = 3,
-	.flags          = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
-	board_smc91x_data.gpio_irq = 158;
-	gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */
-
-static void enable_board_wakeup_source(void)
-{
-	/* T2 interrupt line (keypad) */
-	omap_mux_init_signal("sys_nirq",
-		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = 126,
-	.reset_gpio_port[1]  = 61,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-static void __init omap_sdp_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap2_map_common_io();
-}
-
-static struct omap_board_config_kernel sdp_config[] __initdata = {
-};
-
-static void __init omap_sdp_init_irq(void)
-{
-	omap_board_config = sdp_config;
-	omap_board_config_size = ARRAY_SIZE(sdp_config);
-	omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
-			h8mbx00u0mer0em_sdrc_params);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define board_mux	NULL
-#endif
-
-static void __init omap_sdp_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-	zoom_peripherals_init();
-	board_smc91x_init();
-	enable_board_wakeup_source();
-	usb_ehci_init(&ehci_pdata);
-}
-
-MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
-	.boot_params	= 0x80000100,
-	.map_io		= omap_sdp_map_io,
-	.init_irq	= omap_sdp_init_irq,
-	.init_machine	= omap_sdp_init,
-	.timer		= &omap_timer,
-MACHINE_END