diff options
Diffstat (limited to 'arch/arm/mach-omap2/Kconfig')
| -rw-r--r-- | arch/arm/mach-omap2/Kconfig | 305 |
1 files changed, 153 insertions, 152 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 19d5891c48e..1c1ed737f7a 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -1,3 +1,101 @@ +menu "TI OMAP/AM/DM/DRA Family" + depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 + +config ARCH_OMAP + bool + +config ARCH_OMAP2 + bool "TI OMAP2" + depends on ARCH_MULTI_V6 + select ARCH_OMAP2PLUS + select CPU_V6 + select SOC_HAS_OMAP2_SDRC + +config ARCH_OMAP3 + bool "TI OMAP3" + depends on ARCH_MULTI_V7 + select ARCH_OMAP2PLUS + select ARCH_HAS_OPP + select ARM_CPU_SUSPEND if PM + select OMAP_INTERCONNECT + select PM_OPP if PM + select PM_RUNTIME if CPU_IDLE + select SOC_HAS_OMAP2_SDRC + +config ARCH_OMAP4 + bool "TI OMAP4" + depends on ARCH_MULTI_V7 + select ARCH_OMAP2PLUS + select ARCH_HAS_OPP + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP + select ARM_CPU_SUSPEND if PM + select ARM_ERRATA_720789 + select ARM_GIC + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select OMAP_INTERCONNECT + select PL310_ERRATA_588369 if CACHE_L2X0 + select PL310_ERRATA_727915 if CACHE_L2X0 + select PM_OPP if PM + select PM_RUNTIME if CPU_IDLE + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 + +config SOC_OMAP5 + bool "TI OMAP5" + depends on ARCH_MULTI_V7 + select ARCH_OMAP2PLUS + select ARCH_HAS_OPP + select ARM_CPU_SUSPEND if PM + select ARM_GIC + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select HAVE_ARM_ARCH_TIMER + select ARM_ERRATA_798181 if SMP + +config SOC_AM33XX + bool "TI AM33XX" + depends on ARCH_MULTI_V7 + select ARCH_OMAP2PLUS + select ARCH_HAS_OPP + select ARM_CPU_SUSPEND if PM + +config SOC_AM43XX + bool "TI AM43x" + depends on ARCH_MULTI_V7 + select ARCH_OMAP2PLUS + select ARCH_HAS_OPP + select ARM_GIC + select MACH_OMAP_GENERIC + select MIGHT_HAVE_CACHE_L2X0 + +config SOC_DRA7XX + bool "TI DRA7XX" + depends on ARCH_MULTI_V7 + select ARCH_OMAP2PLUS + select ARCH_HAS_OPP + select ARM_CPU_SUSPEND if PM + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + select IRQ_CROSSBAR + +config ARCH_OMAP2PLUS + bool + select ARCH_HAS_BANDGAP + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_OMAP + select ARCH_REQUIRE_GPIOLIB + select CLKSRC_MMIO + select GENERIC_IRQ_CHIP + select MACH_OMAP_GENERIC + select OMAP_DM_TIMER + select PINCTRL + select SOC_BUS + select TI_PRIV_EDMA + help + Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 + + if ARCH_OMAP2PLUS menu "TI OMAP2/3/4 Specific Features" @@ -6,51 +104,26 @@ config ARCH_OMAP2PLUS_TYPICAL bool "Typical OMAP configuration" default y select AEABI - select REGULATOR - select PM - select PM_RUNTIME - select VFP - select NEON if ARCH_OMAP3 || ARCH_OMAP4 - select SERIAL_OMAP - select SERIAL_OMAP_CONSOLE + select HIGHMEM select I2C select I2C_OMAP - select MFD_SUPPORT select MENELAUS if ARCH_OMAP2 + select NEON if CPU_V7 + select PM_RUNTIME + select REGULATOR select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 + select VFP help Compile a kernel suitable for booting most boards -config ARCH_OMAP2 - bool "TI OMAP2" - depends on ARCH_OMAP2PLUS - default y - select CPU_V6 +config SOC_HAS_OMAP2_SDRC + bool "OMAP2 SDRAM Controller support" -config ARCH_OMAP3 - bool "TI OMAP3" - depends on ARCH_OMAP2PLUS - default y - select CPU_V7 - select USB_ARCH_HAS_EHCI - select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4 - select ARCH_HAS_OPP - select PM_OPP if PM - -config ARCH_OMAP4 - bool "TI OMAP4" +config SOC_HAS_REALTIME_COUNTER + bool "Real time free running counter" + depends on SOC_OMAP5 || SOC_DRA7XX default y - depends on ARCH_OMAP2PLUS - select CPU_V7 - select ARM_GIC - select LOCAL_TIMERS if SMP - select PL310_ERRATA_588369 - select PL310_ERRATA_727915 - select ARM_ERRATA_720789 - select ARCH_HAS_OPP - select PM_OPP if PM - select USB_ARCH_HAS_EHCI comment "OMAP Core Type" depends on ARCH_OMAP2 @@ -60,31 +133,25 @@ config SOC_OMAP2420 depends on ARCH_OMAP2 default y select OMAP_DM_TIMER - select ARCH_OMAP_OTG + select SOC_HAS_OMAP2_SDRC config SOC_OMAP2430 bool "OMAP2430 support" depends on ARCH_OMAP2 default y - select ARCH_OMAP_OTG + select SOC_HAS_OMAP2_SDRC config SOC_OMAP3430 bool "OMAP3430 support" depends on ARCH_OMAP3 default y - select ARCH_OMAP_OTG + select SOC_HAS_OMAP2_SDRC -config SOC_OMAPTI816X - bool "TI816X support" +config SOC_TI81XX + bool "TI81XX support" depends on ARCH_OMAP3 default y -config OMAP_PACKAGE_ZAF - bool - -config OMAP_PACKAGE_ZAC - bool - config OMAP_PACKAGE_CBC bool @@ -97,44 +164,17 @@ config OMAP_PACKAGE_CUS config OMAP_PACKAGE_CBP bool -config OMAP_PACKAGE_CBL - bool - -config OMAP_PACKAGE_CBS - bool - -comment "OMAP Board Type" +comment "OMAP Legacy Platform Data Board Type" depends on ARCH_OMAP2PLUS config MACH_OMAP_GENERIC - bool "Generic OMAP board" - depends on ARCH_OMAP2 - default y + bool config MACH_OMAP2_TUSB6010 bool depends on ARCH_OMAP2 && SOC_OMAP2420 default y if MACH_NOKIA_N8X0 -config MACH_OMAP_H4 - bool "OMAP 2420 H4 board" - depends on SOC_OMAP2420 - default y - select OMAP_PACKAGE_ZAF - select OMAP_DEBUG_DEVICES - -config MACH_OMAP_APOLLON - bool "OMAP 2420 Apollon board" - depends on SOC_OMAP2420 - default y - select OMAP_PACKAGE_ZAC - -config MACH_OMAP_2430SDP - bool "OMAP 2430 SDP board" - depends on SOC_OMAP2430 - default y - select OMAP_PACKAGE_ZAC - config MACH_OMAP3_BEAGLE bool "OMAP3 BEAGLE board" depends on ARCH_OMAP3 @@ -156,8 +196,8 @@ config MACH_OMAP_LDP config MACH_OMAP3530_LV_SOM bool "OMAP3 Logic 3530 LV SOM board" depends on ARCH_OMAP3 - select OMAP_PACKAGE_CBB default y + select OMAP_PACKAGE_CBB help Support for the LogicPD OMAP3530 SOM Development kit for full description please see the products webpage at @@ -166,8 +206,8 @@ config MACH_OMAP3530_LV_SOM config MACH_OMAP3_TORPEDO bool "OMAP3 Logic 35x Torpedo board" depends on ARCH_OMAP3 - select OMAP_PACKAGE_CBB default y + select OMAP_PACKAGE_CBB help Support for the LogicPD OMAP35x Torpedo Development kit for full description please see the products webpage at @@ -179,12 +219,6 @@ config MACH_OVERO default y select OMAP_PACKAGE_CBB -config MACH_OMAP3EVM - bool "OMAP 3530 EVM board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 @@ -201,13 +235,13 @@ config MACH_OMAP3_PANDORA depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR -config MACH_OMAP3_TOUCHBOOK +config MACH_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y - select BACKLIGHT_CLASS_DEVICE + select OMAP_PACKAGE_CBB config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" @@ -215,9 +249,6 @@ config MACH_OMAP_3430SDP default y select OMAP_PACKAGE_CBB -config MACH_NOKIA_N800 - bool - config MACH_NOKIA_N810 bool @@ -228,47 +259,20 @@ config MACH_NOKIA_N8X0 bool "Nokia N800/N810" depends on SOC_OMAP2420 default y - select OMAP_PACKAGE_ZAC - select MACH_NOKIA_N800 select MACH_NOKIA_N810 select MACH_NOKIA_N810_WIMAX -config MACH_NOKIA_RM680 - bool "Nokia RM-680 board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_NOKIA_RX51 - bool "Nokia RX-51 board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - -config MACH_OMAP_ZOOM2 - bool "OMAP3 Zoom2 board" + bool "Nokia N900 (RX-51) phone" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB - select SERIAL_8250 - select SERIAL_CORE_CONSOLE - select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE - -config MACH_OMAP_ZOOM3 - bool "OMAP3630 Zoom3 board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBP - select SERIAL_8250 - select SERIAL_CORE_CONSOLE - select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE config MACH_CM_T35 - bool "CompuLab CM-T35 module" + bool "CompuLab CM-T35/CM-T3730 modules" depends on ARCH_OMAP3 default y + select MACH_CM_T3730 select OMAP_PACKAGE_CUS config MACH_CM_T3517 @@ -277,18 +281,8 @@ config MACH_CM_T3517 default y select OMAP_PACKAGE_CBB -config MACH_IGEP0020 - bool "IGEP v2 board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - -config MACH_IGEP0030 - bool "IGEP OMAP3 module" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - select MACH_IGEP0020 +config MACH_CM_T3730 + bool config MACH_SBC3530 bool "OMAP3 SBC STALKER board" @@ -296,36 +290,20 @@ config MACH_SBC3530 default y select OMAP_PACKAGE_CUS -config MACH_OMAP_3630SDP - bool "OMAP3630 SDP board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBP - config MACH_TI8168EVM bool "TI8168 Evaluation Module" - depends on SOC_OMAPTI816X - default y - -config MACH_OMAP_4430SDP - bool "OMAP 4430 SDP board" + depends on SOC_TI81XX default y - depends on ARCH_OMAP4 - select OMAP_PACKAGE_CBL - select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE -config MACH_OMAP4_PANDA - bool "OMAP4 Panda Board" +config MACH_TI8148EVM + bool "TI8148 Evaluation Module" + depends on SOC_TI81XX default y - depends on ARCH_OMAP4 - select OMAP_PACKAGE_CBL - select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE config OMAP3_EMU bool "OMAP3 debugging peripherals" depends on ARCH_OMAP3 + select ARM_AMBA select OC_ETM help Say Y here to enable debugging hardware of omap3 @@ -342,6 +320,29 @@ config OMAP3_SDRC_AC_TIMING wish to say no. Selecting yes without understanding what is going on could result in system crashes; +config OMAP4_ERRATA_I688 + bool "OMAP4 errata: Async Bridge Corruption" + depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM + select ARCH_HAS_BARRIERS + help + If a data is stalled inside asynchronous bridge because of back + pressure, it may be accepted multiple times, creating pointer + misalignment that will corrupt next transfers on that data path + until next reset of the system (No recovery procedure once the + issue is hit, the path remains consistently broken). Async bridge + can be found on path between MPU to EMIF and MPU to L3 interconnect. + This situation can happen only when the idle is initiated by a + Master Request Disconnection (which is trigged by software when + executing WFI on CPU). + The work-around for this errata needs all the initiators connected + through async bridge must ensure that data path is properly drained + before issuing WFI. This condition will be met if one Strongly ordered + access is performed to the target right before executing the WFI. + In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained. + IO barrier ensure that there is no synchronisation loss on initiators + operating on both interconnect port simultaneously. endmenu endif + +endmenu |