diff options
Diffstat (limited to 'arch/arm/mach-omap1')
41 files changed, 311 insertions, 866 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 903da8eb886..cdd05f2e67e 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -55,12 +55,6 @@ config MACH_OMAP_H3 TI OMAP 1710 H3 board support. Say Y here if you have such a board. -config MACH_OMAP_HTCWIZARD - bool "HTC Wizard" - depends on ARCH_OMAP850 - help - HTC Wizard smartphone support (AKA QTEK 9100, ...) - config MACH_HERALD bool "HTC Herald" depends on ARCH_OMAP850 diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 222d58c0ae7..3889b6cd211 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -19,10 +19,6 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o # Power Management obj-$(CONFIG_PM) += pm.o sleep.o -# DSP -obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o -mailbox_mach-objs := mailbox.o - i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index f12a12af352..d1f12095f31 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -44,13 +44,10 @@ static unsigned int irq_counter[16]; static irqreturn_t deferred_fiq(int irq, void *dev_id) { - struct irq_desc *irq_desc; - struct irq_chip *irq_chip = NULL; int gpio, irq_num, fiq_count; + struct irq_chip *irq_chip; - irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); - if (irq_desc) - irq_chip = irq_desc->irq_data.chip; + irq_chip = irq_get_chip(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); /* * For each handled GPIO interrupt, keep calling its interrupt handler diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 2e98a3ac7c5..2aab761ee68 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -628,6 +628,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .init_irq = omap1_init_irq, .init_machine = ams_delta_init, .init_late = ams_delta_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 560a7dcf0a5..702d58039cc 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -364,6 +364,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 608e7d2a277..e1d9171774b 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -84,6 +84,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .init_irq = omap1_init_irq, .init_machine = omap_generic_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 2274bd677ef..5b45d266d83 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -41,7 +41,6 @@ #include <mach/mux.h> #include <linux/omap-dma.h> #include <mach/tc.h> -#include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> #include <mach/flash.h> @@ -50,7 +49,6 @@ #include "common.h" #include "board-h2.h" -#include "dma.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 @@ -276,39 +274,6 @@ static struct platform_device h2_kp_device = { .resource = h2_kp_resources, }; -#define H2_IRDA_FIRSEL_GPIO_PIN 17 - -static struct omap_irda_config h2_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource h2_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 irda_dmamask = 0xffffffff; - -static struct platform_device h2_irda_device = { - .name = "omapirda", - .id = 0, - .dev = { - .platform_data = &h2_irda_data, - .dma_mask = &irda_dmamask, - }, - .num_resources = ARRAY_SIZE(h2_irda_resources), - .resource = h2_irda_resources, -}; - static struct gpio_led h2_gpio_led_pins[] = { { .name = "h2:red", @@ -339,7 +304,6 @@ static struct platform_device *h2_devices[] __initdata = { &h2_nor_device, &h2_nand_device, &h2_smc91x_device, - &h2_irda_device, &h2_kp_device, &h2_gpio_leds, }; @@ -354,6 +318,9 @@ static void __init h2_init_smc91x(void) static int tps_setup(struct i2c_client *client, void *context) { + if (!IS_BUILTIN(CONFIG_TPS65010)) + return -ENOSYS; + tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | TPS_LDO1_ENABLE | TPS_VLDO1_3_0V); @@ -379,7 +346,7 @@ static struct omap_usb_config h2_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) @@ -461,6 +428,6 @@ MACHINE_START(OMAP_H2, "TI-H2") .init_irq = omap1_init_irq, .init_machine = h2_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 1051935f0aa..bfed4f92866 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -366,7 +366,7 @@ static struct omap_usb_config h3_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ @@ -454,6 +454,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .init_irq = omap1_init_irq, .init_machine = h3_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 356f816c84a..35a2379b986 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -603,6 +603,6 @@ MACHINE_START(HERALD, "HTC Herald") .init_irq = omap1_init_irq, .init_machine = htcherald_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index f8033fab0f8..c49ce83cc1e 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -312,7 +312,7 @@ static struct omap_usb_config h2_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) @@ -458,6 +458,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .init_irq = omap1_init_irq, .init_machine = innovator_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 24d2f2df11a..85089d82198 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/irq.h> #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> @@ -23,6 +24,8 @@ #include <linux/platform_data/keypad-omap.h> #include <linux/platform_data/lcd-mipid.h> +#include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/i2c-cbus-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -153,6 +156,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = { .register_dev = 1, .hmc_mode = 16, .pins[0] = 6, + .extcon = "tahvo-usb", }; #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) @@ -212,6 +216,55 @@ static inline void nokia770_mmc_init(void) } #endif +#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE) +static struct i2c_cbus_platform_data nokia770_cbus_data = { + .clk_gpio = OMAP_MPUIO(9), + .dat_gpio = OMAP_MPUIO(10), + .sel_gpio = OMAP_MPUIO(11), +}; + +static struct platform_device nokia770_cbus_device = { + .name = "i2c-cbus-gpio", + .id = 2, + .dev = { + .platform_data = &nokia770_cbus_data, + }, +}; + +static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = { + { + I2C_BOARD_INFO("retu-mfd", 0x01), + }, + { + I2C_BOARD_INFO("tahvo-mfd", 0x02), + }, +}; + +static void __init nokia770_cbus_init(void) +{ + const int retu_irq_gpio = 62; + const int tahvo_irq_gpio = 40; + + if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ")) + return; + if (gpio_request_one(tahvo_irq_gpio, GPIOF_IN, "Tahvo IRQ")) { + gpio_free(retu_irq_gpio); + return; + } + irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(tahvo_irq_gpio), IRQ_TYPE_EDGE_RISING); + nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio); + nokia770_i2c_board_info_2[1].irq = gpio_to_irq(tahvo_irq_gpio); + i2c_register_board_info(2, nokia770_i2c_board_info_2, + ARRAY_SIZE(nokia770_i2c_board_info_2)); + platform_device_register(&nokia770_cbus_device); +} +#else /* CONFIG_I2C_CBUS_GPIO */ +static void __init nokia770_cbus_init(void) +{ +} +#endif /* CONFIG_I2C_CBUS_GPIO */ + static void __init omap_nokia770_init(void) { /* On Nokia 770, the SleepX signal is masked with an @@ -233,6 +286,7 @@ static void __init omap_nokia770_init(void) mipid_dev_init(); omap1_usb_init(&nokia770_usb_config); nokia770_mmc_init(); + nokia770_cbus_init(); } MACHINE_START(NOKIA770, "Nokia 770") @@ -242,6 +296,6 @@ MACHINE_START(NOKIA770, "Nokia 770") .init_irq = omap1_init_irq, .init_machine = omap_nokia770_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 872ea47cd28..7436d4cf659 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -191,6 +191,9 @@ static struct platform_device osk5912_tps_leds = { static int osk_tps_setup(struct i2c_client *client, void *context) { + if (!IS_BUILTIN(CONFIG_TPS65010)) + return -ENOSYS; + /* Set GPIO 1 HIGH to disable VBUS power supply; * OHCI driver powers it up/down as needed. */ @@ -280,7 +283,7 @@ static struct omap_usb_config osk_usb_config __initdata = { * be used, with a NONSTANDARD gender-bending cable/dongle, as * a peripheral. */ -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) .register_dev = 1, .hmc_mode = 0, #else @@ -300,7 +303,7 @@ static struct omap_lcd_config osk_lcd_config __initdata = { #ifdef CONFIG_OMAP_OSK_MISTRAL #include <linux/input.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -609,6 +612,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .init_irq = omap1_init_irq, .init_machine = osk_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index c33dceb4660..3b8e98f4353 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -38,14 +38,12 @@ #include <mach/mux.h> #include <mach/tc.h> #include <linux/omap-dma.h> -#include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> #include <mach/usb.h> #include "common.h" -#include "dma.h" #define PALMTE_USBDETECT_GPIO 0 #define PALMTE_USB_OR_DC_GPIO 1 @@ -167,40 +165,11 @@ static struct platform_device palmte_backlight_device = { }, }; -static struct omap_irda_config palmte_irda_config = { - .transceiver_cap = IR_SIRMODE, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource palmte_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device palmte_irda_device = { - .name = "omapirda", - .id = -1, - .dev = { - .platform_data = &palmte_irda_config, - }, - .num_resources = ARRAY_SIZE(palmte_irda_resources), - .resource = palmte_irda_resources, -}; - static struct platform_device *palmte_devices[] __initdata = { &palmte_rom_device, &palmte_kp_device, &palmte_lcd_device, &palmte_backlight_device, - &palmte_irda_device, }; static struct omap_usb_config palmte_usb_config __initdata = { @@ -268,6 +237,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .init_irq = omap1_init_irq, .init_machine = omap_palmte_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 2948b0ee4be..ca501208825 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -38,14 +38,12 @@ #include <mach/mux.h> #include <linux/omap-dma.h> #include <mach/tc.h> -#include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> #include <mach/usb.h> #include "common.h" -#include "dma.h" #define PALMTT_USBDETECT_GPIO 0 #define PALMTT_CABLE_GPIO 1 @@ -163,33 +161,6 @@ static struct platform_device palmtt_lcd_device = { .name = "lcd_palmtt", .id = -1, }; -static struct omap_irda_config palmtt_irda_config = { - .transceiver_cap = IR_SIRMODE, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource palmtt_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device palmtt_irda_device = { - .name = "omapirda", - .id = -1, - .dev = { - .platform_data = &palmtt_irda_config, - }, - .num_resources = ARRAY_SIZE(palmtt_irda_resources), - .resource = palmtt_irda_resources, -}; static struct platform_device palmtt_spi_device = { .name = "spi_palmtt", @@ -234,7 +205,6 @@ static struct platform_device *palmtt_devices[] __initdata = { &palmtt_flash_device, &palmtt_kp_device, &palmtt_lcd_device, - &palmtt_irda_device, &palmtt_spi_device, &palmtt_backlight_device, &palmtt_led_device, @@ -314,6 +284,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .init_irq = omap1_init_irq, .init_machine = omap_palmtt_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 7a05895c0be..470e12d6736 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -40,14 +40,12 @@ #include <mach/mux.h> #include <linux/omap-dma.h> #include <mach/tc.h> -#include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> #include <mach/usb.h> #include "common.h" -#include "dma.h" #define PALMZ71_USBDETECT_GPIO 0 #define PALMZ71_PENIRQ_GPIO 6 @@ -153,34 +151,6 @@ static struct platform_device palmz71_lcd_device = { .id = -1, }; -static struct omap_irda_config palmz71_irda_config = { - .transceiver_cap = IR_SIRMODE, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource palmz71_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device palmz71_irda_device = { - .name = "omapirda", - .id = -1, - .dev = { - .platform_data = &palmz71_irda_config, - }, - .num_resources = ARRAY_SIZE(palmz71_irda_resources), - .resource = palmz71_irda_resources, -}; - static struct platform_device palmz71_spi_device = { .name = "spi_palmz71", .id = -1, @@ -202,7 +172,6 @@ static struct platform_device *devices[] __initdata = { &palmz71_rom_device, &palmz71_kp_device, &palmz71_lcd_device, - &palmz71_irda_device, &palmz71_spi_device, &palmz71_backlight_device, }; @@ -330,6 +299,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .init_irq = omap1_init_irq, .init_machine = omap_palmz71_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 27f8d12ec22..8b2f7127f71 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -326,6 +326,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .init_irq = omap1_init_irq, .init_machine = omap_perseus2_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 20ed52ae171..29e526235dc 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -37,7 +37,6 @@ #include <mach/flash.h> #include <mach/mux.h> #include <linux/omap-dma.h> -#include <mach/irda.h> #include <mach/tc.h> #include <mach/board-sx1.h> @@ -45,7 +44,6 @@ #include <mach/usb.h> #include "common.h" -#include "dma.h" /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) @@ -228,39 +226,6 @@ static struct platform_device sx1_kp_device = { .resource = sx1_kp_resources, }; -/*----------- IRDA -------------------------*/ - -static struct omap_irda_config sx1_irda_data = { - .transceiver_cap = IR_SIRMODE, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource sx1_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 irda_dmamask = 0xffffffff; - -static struct platform_device sx1_irda_device = { - .name = "omapirda", - .id = 0, - .dev = { - .platform_data = &sx1_irda_data, - .dma_mask = &irda_dmamask, - }, - .num_resources = ARRAY_SIZE(sx1_irda_resources), - .resource = sx1_irda_resources, -}; - /*----------- MTD -------------------------*/ static struct mtd_partition sx1_partitions[] = { @@ -301,31 +266,6 @@ static struct physmap_flash_data sx1_flash_data = { .nr_parts = ARRAY_SIZE(sx1_partitions), }; -#ifdef CONFIG_SX1_OLD_FLASH -/* MTD Intel StrataFlash - old flashes */ -static struct resource sx1_old_flash_resource[] = { - [0] = { - .start = OMAP_CS0_PHYS, /* Physical */ - .end = OMAP_CS0_PHYS + SZ_16M - 1,, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_CS1_PHYS, - .end = OMAP_CS1_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device sx1_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &sx1_flash_data, - }, - .num_resources = 2, - .resource = &sx1_old_flash_resource, -}; -#else /* MTD Intel 4000 flash - new flashes */ static struct resource sx1_new_flash_resource = { .start = OMAP_CS0_PHYS, @@ -342,7 +282,6 @@ static struct platform_device sx1_flash_device = { .num_resources = 1, .resource = &sx1_new_flash_resource, }; -#endif /*----------- USB -------------------------*/ @@ -366,7 +305,6 @@ static struct omap_lcd_config sx1_lcd_config __initdata = { static struct platform_device *sx1_devices[] __initdata = { &sx1_flash_device, &sx1_kp_device, - &sx1_irda_device, }; /*-----------------------------------------*/ @@ -407,6 +345,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .init_irq = omap1_init_irq, .init_machine = omap_sx1_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index abf705f49b1..4677a9ccb3c 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -26,6 +26,7 @@ #include <linux/serial_reg.h> #include <linux/smc91x.h> #include <linux/export.h> +#include <linux/reboot.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -215,7 +216,7 @@ void voiceblue_wdt_ping(void) gpio_set_value(0, wdt_gpio_state); } -static void voiceblue_restart(char mode, const char *cmd) +static void voiceblue_restart(enum reboot_mode mode, const char *cmd) { /* * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 @@ -289,6 +290,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .init_irq = omap1_init_irq, .init_machine = voiceblue_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = voiceblue_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index cb7c6ae2e3f..6c4f766365a 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -543,15 +543,6 @@ static struct clk usb_dc_ck = { /* Direct from ULPD, no parent */ .rate = 48000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = USB_REQ_EN_SHIFT, -}; - -static struct clk usb_dc_ck7xx = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT, }; @@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX), CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), CLK(NULL, "mclk", &mclk_16xx, CK_16XX), CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index b53e0854422..732f8ee2fcd 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -28,9 +28,12 @@ #include <linux/mtd/mtd.h> #include <linux/i2c-omap.h> +#include <linux/reboot.h> #include <plat/i2c.h> +#include <mach/irqs.h> + #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); #else @@ -43,6 +46,9 @@ static inline void omap7xx_map_io(void) void omap1510_fpga_init_irq(void); void omap15xx_map_io(void); #else +static inline void omap1510_fpga_init_irq(void) +{ +} static inline void omap15xx_map_io(void) { } @@ -68,14 +74,14 @@ static inline int omap_serial_wakeup_init(void) void omap1_init_early(void); void omap1_init_irq(void); void omap1_init_late(void); -void omap1_restart(char, const char *); +void omap1_restart(enum reboot_mode, const char *); extern void __init omap_check_revision(void); extern void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl); -extern struct sys_timer omap1_timer; +extern void omap1_timer_init(void); #ifdef CONFIG_OMAP_32K_TIMER extern int omap_32k_timer_init(void); #else diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 0af635205e8..325e6030095 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -30,7 +30,6 @@ #include "common.h" #include "clock.h" -#include "dma.h" #include "mmc.h" #include "sram.h" @@ -223,16 +222,16 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, case 0: base = OMAP1_MMC1_BASE; irq = INT_MMC; - rx_req = OMAP_DMA_MMC_RX; - tx_req = OMAP_DMA_MMC_TX; + rx_req = 22; + tx_req = 21; break; case 1: if (!cpu_is_omap16xx()) return; base = OMAP1_MMC2_BASE; irq = INT_1610_MMC2; - rx_req = OMAP_DMA_MMC2_RX; - tx_req = OMAP_DMA_MMC2_TX; + rx_req = 55; + tx_req = 54; break; default: continue; diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index e190611e4b4..4be601b638d 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -24,65 +24,59 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/io.h> - +#include <linux/dma-mapping.h> #include <linux/omap-dma.h> #include <mach/tc.h> #include <mach/irqs.h> -#include "dma.h" - #define OMAP1_DMA_BASE (0xfffed800) #define OMAP1_LOGICAL_DMA_CH_COUNT 17 -#define OMAP1_DMA_STRIDE 0x40 -static u32 errata; static u32 enable_1510_mode; -static u8 dma_stride; -static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end; - -static u16 reg_map[] = { - [GCR] = 0x400, - [GSCR] = 0x404, - [GRST1] = 0x408, - [HW_ID] = 0x442, - [PCH2_ID] = 0x444, - [PCH0_ID] = 0x446, - [PCH1_ID] = 0x448, - [PCHG_ID] = 0x44a, - [PCHD_ID] = 0x44c, - [CAPS_0] = 0x44e, - [CAPS_1] = 0x452, - [CAPS_2] = 0x456, - [CAPS_3] = 0x458, - [CAPS_4] = 0x45a, - [PCH2_SR] = 0x460, - [PCH0_SR] = 0x480, - [PCH1_SR] = 0x482, - [PCHD_SR] = 0x4c0, + +static const struct omap_dma_reg reg_map[] = { + [GCR] = { 0x0400, 0x00, OMAP_DMA_REG_16BIT }, + [GSCR] = { 0x0404, 0x00, OMAP_DMA_REG_16BIT }, + [GRST1] = { 0x0408, 0x00, OMAP_DMA_REG_16BIT }, + [HW_ID] = { 0x0442, 0x00, OMAP_DMA_REG_16BIT }, + [PCH2_ID] = { 0x0444, 0x00, OMAP_DMA_REG_16BIT }, + [PCH0_ID] = { 0x0446, 0x00, OMAP_DMA_REG_16BIT }, + [PCH1_ID] = { 0x0448, 0x00, OMAP_DMA_REG_16BIT }, + [PCHG_ID] = { 0x044a, 0x00, OMAP_DMA_REG_16BIT }, + [PCHD_ID] = { 0x044c, 0x00, OMAP_DMA_REG_16BIT }, + [CAPS_0] = { 0x044e, 0x00, OMAP_DMA_REG_2X16BIT }, + [CAPS_1] = { 0x0452, 0x00, OMAP_DMA_REG_2X16BIT }, + [CAPS_2] = { 0x0456, 0x00, OMAP_DMA_REG_16BIT }, + [CAPS_3] = { 0x0458, 0x00, OMAP_DMA_REG_16BIT }, + [CAPS_4] = { 0x045a, 0x00, OMAP_DMA_REG_16BIT }, + [PCH2_SR] = { 0x0460, 0x00, OMAP_DMA_REG_16BIT }, + [PCH0_SR] = { 0x0480, 0x00, OMAP_DMA_REG_16BIT }, + [PCH1_SR] = { 0x0482, 0x00, OMAP_DMA_REG_16BIT }, + [PCHD_SR] = { 0x04c0, 0x00, OMAP_DMA_REG_16BIT }, /* Common Registers */ - [CSDP] = 0x00, - [CCR] = 0x02, - [CICR] = 0x04, - [CSR] = 0x06, - [CEN] = 0x10, - [CFN] = 0x12, - [CSFI] = 0x14, - [CSEI] = 0x16, - [CPC] = 0x18, /* 15xx only */ - [CSAC] = 0x18, - [CDAC] = 0x1a, - [CDEI] = 0x1c, - [CDFI] = 0x1e, - [CLNK_CTRL] = 0x28, + [CSDP] = { 0x0000, 0x40, OMAP_DMA_REG_16BIT }, + [CCR] = { 0x0002, 0x40, OMAP_DMA_REG_16BIT }, + [CICR] = { 0x0004, 0x40, OMAP_DMA_REG_16BIT }, + [CSR] = { 0x0006, 0x40, OMAP_DMA_REG_16BIT }, + [CEN] = { 0x0010, 0x40, OMAP_DMA_REG_16BIT }, + [CFN] = { 0x0012, 0x40, OMAP_DMA_REG_16BIT }, + [CSFI] = { 0x0014, 0x40, OMAP_DMA_REG_16BIT }, + [CSEI] = { 0x0016, 0x40, OMAP_DMA_REG_16BIT }, + [CPC] = { 0x0018, 0x40, OMAP_DMA_REG_16BIT }, /* 15xx only */ + [CSAC] = { 0x0018, 0x40, OMAP_DMA_REG_16BIT }, + [CDAC] = { 0x001a, 0x40, OMAP_DMA_REG_16BIT }, + [CDEI] = { 0x001c, 0x40, OMAP_DMA_REG_16BIT }, + [CDFI] = { 0x001e, 0x40, OMAP_DMA_REG_16BIT }, + [CLNK_CTRL] = { 0x0028, 0x40, OMAP_DMA_REG_16BIT }, /* Channel specific register offsets */ - [CSSA] = 0x08, - [CDSA] = 0x0c, - [COLOR] = 0x20, - [CCR2] = 0x24, - [LCH_CTRL] = 0x2a, + [CSSA] = { 0x0008, 0x40, OMAP_DMA_REG_2X16BIT }, + [CDSA] = { 0x000c, 0x40, OMAP_DMA_REG_2X16BIT }, + [COLOR] = { 0x0020, 0x40, OMAP_DMA_REG_2X16BIT }, + [CCR2] = { 0x0024, 0x40, OMAP_DMA_REG_16BIT }, + [LCH_CTRL] = { 0x002a, 0x40, OMAP_DMA_REG_16BIT }, }; static struct resource res[] __initdata = { @@ -183,44 +177,36 @@ static struct resource res[] __initdata = { static void __iomem *dma_base; static inline void dma_write(u32 val, int reg, int lch) { - u8 stride; - u32 offset; + void __iomem *addr = dma_base; - stride = (reg >= dma_common_ch_start) ? dma_stride : 0; - offset = reg_map[reg] + (stride * lch); + addr += reg_map[reg].offset; + addr += reg_map[reg].stride * lch; - __raw_writew(val, dma_base + offset); - if ((reg > CLNK_CTRL && reg < CCEN) || - (reg > PCHD_ID && reg < CAPS_2)) { - u32 offset2 = reg_map[reg] + 2 + (stride * lch); - __raw_writew(val >> 16, dma_base + offset2); - } + __raw_writew(val, addr); + if (reg_map[reg].type == OMAP_DMA_REG_2X16BIT) + __raw_writew(val >> 16, addr + 2); } static inline u32 dma_read(int reg, int lch) { - u8 stride; - u32 offset, val; - - stride = (reg >= dma_common_ch_start) ? dma_stride : 0; - offset = reg_map[reg] + (stride * lch); - - val = __raw_readw(dma_base + offset); - if ((reg > CLNK_CTRL && reg < CCEN) || - (reg > PCHD_ID && reg < CAPS_2)) { - u16 upper; - u32 offset2 = reg_map[reg] + 2 + (stride * lch); - upper = __raw_readw(dma_base + offset2); - val |= (upper << 16); - } + void __iomem *addr = dma_base; + uint32_t val; + + addr += reg_map[reg].offset; + addr += reg_map[reg].stride * lch; + + val = __raw_readw(addr); + if (reg_map[reg].type == OMAP_DMA_REG_2X16BIT) + val |= __raw_readw(addr + 2) << 16; + return val; } static void omap1_clear_lch_regs(int lch) { - int i = dma_common_ch_start; + int i; - for (; i <= dma_common_ch_end; i += 1) + for (i = CPC; i <= COLOR; i += 1) dma_write(0, i, lch); } @@ -257,8 +243,9 @@ static void omap1_show_dma_caps(void) return; } -static u32 configure_dma_errata(void) +static unsigned configure_dma_errata(void) { + unsigned errata = 0; /* * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is @@ -270,11 +257,29 @@ static u32 configure_dma_errata(void) return errata; } +static const struct platform_device_info omap_dma_dev_info = { + .name = "omap-dma-engine", + .id = -1, + .dma_mask = DMA_BIT_MASK(32), + .res = res, + .num_res = 1, +}; + +static struct omap_system_dma_plat_info dma_plat_info __initdata = { + .reg_map = reg_map, + .channel_stride = 0x40, + .show_dma_caps = omap1_show_dma_caps, + .clear_lch_regs = omap1_clear_lch_regs, + .clear_dma = omap1_clear_dma, + .dma_write = dma_write, + .dma_read = dma_read, +}; + static int __init omap1_system_dma_init(void) { - struct omap_system_dma_plat_info *p; + struct omap_system_dma_plat_info p; struct omap_dma_dev_attr *d; - struct platform_device *pdev; + struct platform_device *pdev, *dma_pdev; int ret; pdev = platform_device_alloc("omap_dma_system", 0); @@ -295,15 +300,7 @@ static int __init omap1_system_dma_init(void) if (ret) { dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", __func__, pdev->name, pdev->id); - goto exit_device_put; - } - - p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL); - if (!p) { - dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n", - __func__, pdev->name); - ret = -ENOMEM; - goto exit_device_del; + goto exit_iounmap; } d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL); @@ -311,7 +308,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Unable to allocate 'd' for %s\n", __func__, pdev->name); ret = -ENOMEM; - goto exit_release_p; + goto exit_iounmap; } d->lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; @@ -332,16 +329,6 @@ static int __init omap1_system_dma_init(void) d->dev_caps |= CLEAR_CSR_ON_READ; d->dev_caps |= IS_WORD_16; - - d->chan = kzalloc(sizeof(struct omap_dma_lch) * - (d->lch_count), GFP_KERNEL); - if (!d->chan) { - dev_err(&pdev->dev, - "%s: Memory allocation failed for d->chan!\n", - __func__); - goto exit_release_d; - } - if (cpu_is_omap15xx()) d->chan_count = 9; else if (cpu_is_omap16xx() || cpu_is_omap7xx()) { @@ -351,45 +338,38 @@ static int __init omap1_system_dma_init(void) d->chan_count = 9; } - p->dma_attr = d; + p = dma_plat_info; + p.dma_attr = d; + p.errata = configure_dma_errata(); - p->show_dma_caps = omap1_show_dma_caps; - p->clear_lch_regs = omap1_clear_lch_regs; - p->clear_dma = omap1_clear_dma; - p->dma_write = dma_write; - p->dma_read = dma_read; - p->disable_irq_lch = NULL; - - p->errata = configure_dma_errata(); - - ret = platform_device_add_data(pdev, p, sizeof(*p)); + ret = platform_device_add_data(pdev, &p, sizeof(p)); if (ret) { dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", __func__, pdev->name, pdev->id); - goto exit_release_chan; + goto exit_release_d; } ret = platform_device_add(pdev); if (ret) { dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", __func__, pdev->name, pdev->id); - goto exit_release_chan; + goto exit_release_d; } - dma_stride = OMAP1_DMA_STRIDE; - dma_common_ch_start = CPC; - dma_common_ch_end = COLOR; + dma_pdev = platform_device_register_full(&omap_dma_dev_info); + if (IS_ERR(dma_pdev)) { + ret = PTR_ERR(dma_pdev); + goto exit_release_pdev; + } return ret; -exit_release_chan: - kfree(d->chan); +exit_release_pdev: + platform_device_del(pdev); exit_release_d: kfree(d); -exit_release_p: - kfree(p); -exit_device_del: - platform_device_del(pdev); +exit_iounmap: + iounmap(dma_base); exit_device_put: platform_device_put(pdev); diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h deleted file mode 100644 index da6345dab03..00000000000 --- a/arch/arm/mach-omap1/dma.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * OMAP1 DMA channel definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __OMAP1_DMA_CHANNEL_H -#define __OMAP1_DMA_CHANNEL_H - -/* DMA channels for omap1 */ -#define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 -#define OMAP_DMA_MCBSP1_TX 8 -#define OMAP_DMA_MCBSP1_RX 9 -#define OMAP_DMA_MCBSP3_TX 10 -#define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 -#define OMAP_DMA_MCBSP2_TX 16 -#define OMAP_DMA_MCBSP2_RX 17 -#define OMAP_DMA_UART3_TX 18 -#define OMAP_DMA_UART3_RX 19 -#define OMAP_DMA_CAMERA_IF_RX 20 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 -#define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 -#define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 - -/* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 - -#endif /* __OMAP1_DMA_CHANNEL_H */ diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 8bd71b2d096..3c0e4221920 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -135,8 +135,7 @@ static struct irq_chip omap_fpga_irq = { * mask_ack routine for all of the FPGA interrupts has been changed from * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt * being serviced is left unmasked. We can do this because the FPGA cascade - * interrupt is installed with the IRQF_DISABLED flag, which leaves all - * interrupts masked at the CPU while an FPGA interrupt handler executes. + * interrupt is run with all interrupts masked. * * Limited testing indicates that this workaround appears to be effective * for the smc9194 Ethernet driver used on the Innovator. It should work diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 02b3eb2e201..312a0924d78 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -25,7 +25,7 @@ #define OMAP1510_GPIO_BASE 0xFFFCE000 /* gpio1 */ -static struct __initdata resource omap15xx_mpu_gpio_resources[] = { +static struct resource omap15xx_mpu_gpio_resources[] = { { .start = OMAP1_MPUIO_VBASE, .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, @@ -48,7 +48,7 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = { .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE, }; -static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { +static struct omap_gpio_platform_data omap15xx_mpu_gpio_config = { .is_mpuio = true, .bank_width = 16, .bank_stride = 1, @@ -66,7 +66,7 @@ static struct platform_device omap15xx_mpu_gpio = { }; /* gpio2 */ -static struct __initdata resource omap15xx_gpio_resources[] = { +static struct resource omap15xx_gpio_resources[] = { { .start = OMAP1510_GPIO_BASE, .end = OMAP1510_GPIO_BASE + SZ_2K - 1, @@ -90,7 +90,7 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = { .pinctrl = OMAP1510_GPIO_PIN_CONTROL, }; -static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { +static struct omap_gpio_platform_data omap15xx_gpio_config = { .bank_width = 16, .regs = &omap15xx_gpio_regs, }; diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index b9952a258d8..6e6ec93dcbb 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -31,7 +31,7 @@ #define SYSCONFIG_WORD 0x14 /* mpu gpio */ -static struct __initdata resource omap16xx_mpu_gpio_resources[] = { +static struct resource omap16xx_mpu_gpio_resources[] = { { .start = OMAP1_MPUIO_VBASE, .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, @@ -54,7 +54,7 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = { .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE, }; -static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { +static struct omap_gpio_platform_data omap16xx_mpu_gpio_config = { .is_mpuio = true, .bank_width = 16, .bank_stride = 1, @@ -72,7 +72,7 @@ static struct platform_device omap16xx_mpu_gpio = { }; /* gpio1 */ -static struct __initdata resource omap16xx_gpio1_resources[] = { +static struct resource omap16xx_gpio1_resources[] = { { .start = OMAP1610_GPIO1_BASE, .end = OMAP1610_GPIO1_BASE + SZ_2K - 1, @@ -100,7 +100,7 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = { .edgectrl2 = OMAP1610_GPIO_EDGE_CTRL2, }; -static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { +static struct omap_gpio_platform_data omap16xx_gpio1_config = { .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -116,7 +116,7 @@ static struct platform_device omap16xx_gpio1 = { }; /* gpio2 */ -static struct __initdata resource omap16xx_gpio2_resources[] = { +static struct resource omap16xx_gpio2_resources[] = { { .start = OMAP1610_GPIO2_BASE, .end = OMAP1610_GPIO2_BASE + SZ_2K - 1, @@ -128,7 +128,7 @@ static struct __initdata resource omap16xx_gpio2_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { +static struct omap_gpio_platform_data omap16xx_gpio2_config = { .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -144,7 +144,7 @@ static struct platform_device omap16xx_gpio2 = { }; /* gpio3 */ -static struct __initdata resource omap16xx_gpio3_resources[] = { +static struct resource omap16xx_gpio3_resources[] = { { .start = OMAP1610_GPIO3_BASE, .end = OMAP1610_GPIO3_BASE + SZ_2K - 1, @@ -156,7 +156,7 @@ static struct __initdata resource omap16xx_gpio3_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { +static struct omap_gpio_platform_data omap16xx_gpio3_config = { .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -172,7 +172,7 @@ static struct platform_device omap16xx_gpio3 = { }; /* gpio4 */ -static struct __initdata resource omap16xx_gpio4_resources[] = { +static struct resource omap16xx_gpio4_resources[] = { { .start = OMAP1610_GPIO4_BASE, .end = OMAP1610_GPIO4_BASE + SZ_2K - 1, @@ -184,7 +184,7 @@ static struct __initdata resource omap16xx_gpio4_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { +static struct omap_gpio_platform_data omap16xx_gpio4_config = { .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -199,7 +199,7 @@ static struct platform_device omap16xx_gpio4 = { .resource = omap16xx_gpio4_resources, }; -static struct __initdata platform_device * omap16xx_gpio_dev[] = { +static struct platform_device *omap16xx_gpio_dev[] __initdata = { &omap16xx_mpu_gpio, &omap16xx_gpio1, &omap16xx_gpio2, diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index f5819b2b7cb..4612d2506a2 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -30,7 +30,7 @@ #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE /* mpu gpio */ -static struct __initdata resource omap7xx_mpu_gpio_resources[] = { +static struct resource omap7xx_mpu_gpio_resources[] = { { .start = OMAP1_MPUIO_VBASE, .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, @@ -53,7 +53,7 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = { .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE >> 1, }; -static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { +static struct omap_gpio_platform_data omap7xx_mpu_gpio_config = { .is_mpuio = true, .bank_width = 16, .bank_stride = 2, @@ -71,7 +71,7 @@ static struct platform_device omap7xx_mpu_gpio = { }; /* gpio1 */ -static struct __initdata resource omap7xx_gpio1_resources[] = { +static struct resource omap7xx_gpio1_resources[] = { { .start = OMAP7XX_GPIO1_BASE, .end = OMAP7XX_GPIO1_BASE + SZ_2K - 1, @@ -94,7 +94,7 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = { .irqctrl = OMAP7XX_GPIO_INT_CONTROL, }; -static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { +static struct omap_gpio_platform_data omap7xx_gpio1_config = { .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -110,7 +110,7 @@ static struct platform_device omap7xx_gpio1 = { }; /* gpio2 */ -static struct __initdata resource omap7xx_gpio2_resources[] = { +static struct resource omap7xx_gpio2_resources[] = { { .start = OMAP7XX_GPIO2_BASE, .end = OMAP7XX_GPIO2_BASE + SZ_2K - 1, @@ -122,7 +122,7 @@ static struct __initdata resource omap7xx_gpio2_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { +static struct omap_gpio_platform_data omap7xx_gpio2_config = { .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -138,7 +138,7 @@ static struct platform_device omap7xx_gpio2 = { }; /* gpio3 */ -static struct __initdata resource omap7xx_gpio3_resources[] = { +static struct resource omap7xx_gpio3_resources[] = { { .start = OMAP7XX_GPIO3_BASE, .end = OMAP7XX_GPIO3_BASE + SZ_2K - 1, @@ -150,7 +150,7 @@ static struct __initdata resource omap7xx_gpio3_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { +static struct omap_gpio_platform_data omap7xx_gpio3_config = { .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -166,7 +166,7 @@ static struct platform_device omap7xx_gpio3 = { }; /* gpio4 */ -static struct __initdata resource omap7xx_gpio4_resources[] = { +static struct resource omap7xx_gpio4_resources[] = { { .start = OMAP7XX_GPIO4_BASE, .end = OMAP7XX_GPIO4_BASE + SZ_2K - 1, @@ -178,7 +178,7 @@ static struct __initdata resource omap7xx_gpio4_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { +static struct omap_gpio_platform_data omap7xx_gpio4_config = { .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -194,7 +194,7 @@ static struct platform_device omap7xx_gpio4 = { }; /* gpio5 */ -static struct __initdata resource omap7xx_gpio5_resources[] = { +static struct resource omap7xx_gpio5_resources[] = { { .start = OMAP7XX_GPIO5_BASE, .end = OMAP7XX_GPIO5_BASE + SZ_2K - 1, @@ -206,7 +206,7 @@ static struct __initdata resource omap7xx_gpio5_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { +static struct omap_gpio_platform_data omap7xx_gpio5_config = { .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -222,7 +222,7 @@ static struct platform_device omap7xx_gpio5 = { }; /* gpio6 */ -static struct __initdata resource omap7xx_gpio6_resources[] = { +static struct resource omap7xx_gpio6_resources[] = { { .start = OMAP7XX_GPIO6_BASE, .end = OMAP7XX_GPIO6_BASE + SZ_2K - 1, @@ -234,7 +234,7 @@ static struct __initdata resource omap7xx_gpio6_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { +static struct omap_gpio_platform_data omap7xx_gpio6_config = { .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -249,7 +249,7 @@ static struct platform_device omap7xx_gpio6 = { .resource = omap7xx_gpio6_resources, }; -static struct __initdata platform_device * omap7xx_gpio_dev[] = { +static struct platform_device *omap7xx_gpio_dev[] __initdata = { &omap7xx_mpu_gpio, &omap7xx_gpio1, &omap7xx_gpio2, diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index faca808cb3d..7f5761cffd2 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -91,3 +91,9 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, return platform_device_register(pdev); } + +static int __init omap_i2c_cmdline(void) +{ + return omap_register_i2c_bus_cmdline(); +} +subsys_initcall(omap_i2c_cmdline); diff --git a/arch/arm/mach-omap1/include/mach/irda.h b/arch/arm/mach-omap1/include/mach/irda.h deleted file mode 100644 index 40f60339d1c..00000000000 --- a/arch/arm/mach-omap1/include/mach/irda.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/irda.h - * - * Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_IRDA_H -#define ASMARM_ARCH_IRDA_H - -/* board specific transceiver capabilities */ - -#define IR_SEL 1 /* Selects IrDA */ -#define IR_SIRMODE 2 -#define IR_FIRMODE 4 -#define IR_MIRMODE 8 - -struct omap_irda_config { - int transceiver_cap; - int (*transceiver_mode)(struct device *dev, int mode); - int (*select_irda)(struct device *dev, int state); - int rx_channel; - int tx_channel; - unsigned long dest_start; - unsigned long src_start; - int tx_trigger; - int rx_trigger; - int mode; -}; - -#endif diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h index 6cf9c1cc2be..612bd1cc257 100644 --- a/arch/arm/mach-omap1/include/mach/soc.h +++ b/arch/arm/mach-omap1/include/mach/soc.h @@ -195,6 +195,7 @@ IS_OMAP_TYPE(1710, 0x1710) #define cpu_is_omap34xx() 0 #define cpu_is_omap44xx() 0 #define soc_is_omap54xx() 0 +#define soc_is_dra7xx() 0 #define soc_is_am33xx() 0 #define cpu_class_is_omap1() 1 #define cpu_class_is_omap2() 0 diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h deleted file mode 100644 index 4793790d53c..00000000000 --- a/arch/arm/mach-omap1/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/timex.h - */ - -#include <plat/timex.h> diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h index ad6fbe7d83f..4869633de8c 100644 --- a/arch/arm/mach-omap1/include/mach/uncompress.h +++ b/arch/arm/mach-omap1/include/mach/uncompress.h @@ -115,8 +115,3 @@ static inline void arch_decomp_setup(void) DEBUG_LL_OMAP1(3, sx1); } while (0); } - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 753cd5ce694..2c263051dc5 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -2,49 +2,13 @@ * FIXME correct answer depends on hmc_mode, * as does (on omap1) any nonzero value for config->otg port number */ -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) #define is_usb0_device(config) 1 #else #define is_usb0_device(config) 0 #endif -struct omap_usb_config { - /* Configure drivers according to the connectors on your board: - * - "A" connector (rectagular) - * ... for host/OHCI use, set "register_host". - * - "B" connector (squarish) or "Mini-B" - * ... for device/gadget use, set "register_dev". - * - "Mini-AB" connector (very similar to Mini-B) - * ... for OTG use as device OR host, initialize "otg" - */ - unsigned register_host:1; - unsigned register_dev:1; - u8 otg; /* port number, 1-based: usb1 == 2 */ - - u8 hmc_mode; - - /* implicitly true if otg: host supports remote wakeup? */ - u8 rwc; - - /* signaling pins used to talk to transceiver on usbN: - * 0 == usbN unused - * 2 == usb0-only, using internal transceiver - * 3 == 3 wire bidirectional - * 4 == 4 wire bidirectional - * 6 == 6 wire unidirectional (or TLL) - */ - u8 pins[3]; - - struct platform_device *udc_device; - struct platform_device *ohci_device; - struct platform_device *otg_device; - - u32 (*usb0_init)(unsigned nwires, unsigned is_device); - u32 (*usb1_init)(unsigned nwires); - u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); - - int (*ocpi_enable)(void); -}; +#include <linux/platform_data/usb-omap1.h> void omap_otg_init(struct omap_usb_config *config); diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 77924be37d4..26a2b01c7c4 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -32,8 +32,6 @@ #include <mach/hardware.h> #include <mach/lcdc.h> -#include "dma.h" - int omap_lcd_dma_running(void) { /* diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c deleted file mode 100644 index efc8f207f6f..00000000000 --- a/arch/arm/mach-omap1/mailbox.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Mailbox reservation modules for OMAP1 - * - * Copyright (C) 2006-2009 Nokia Corporation - * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <plat/mailbox.h> - -#define MAILBOX_ARM2DSP1 0x00 -#define MAILBOX_ARM2DSP1b 0x04 -#define MAILBOX_DSP2ARM1 0x08 -#define MAILBOX_DSP2ARM1b 0x0c -#define MAILBOX_DSP2ARM2 0x10 -#define MAILBOX_DSP2ARM2b 0x14 -#define MAILBOX_ARM2DSP1_Flag 0x18 -#define MAILBOX_DSP2ARM1_Flag 0x1c -#define MAILBOX_DSP2ARM2_Flag 0x20 - -static void __iomem *mbox_base; - -struct omap_mbox1_fifo { - unsigned long cmd; - unsigned long data; - unsigned long flag; -}; - -struct omap_mbox1_priv { - struct omap_mbox1_fifo tx_fifo; - struct omap_mbox1_fifo rx_fifo; -}; - -static inline int mbox_read_reg(size_t ofs) -{ - return __raw_readw(mbox_base + ofs); -} - -static inline void mbox_write_reg(u32 val, size_t ofs) -{ - __raw_writew(val, mbox_base + ofs); -} - -/* msg */ -static mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox) -{ - struct omap_mbox1_fifo *fifo = - &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; - mbox_msg_t msg; - - msg = mbox_read_reg(fifo->data); - msg |= ((mbox_msg_t) mbox_read_reg(fifo->cmd)) << 16; - - return msg; -} - -static void -omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) -{ - struct omap_mbox1_fifo *fifo = - &((struct omap_mbox1_priv *)mbox->priv)->tx_fifo; - - mbox_write_reg(msg & 0xffff, fifo->data); - mbox_write_reg(msg >> 16, fifo->cmd); -} - -static int omap1_mbox_fifo_empty(struct omap_mbox *mbox) -{ - return 0; -} - -static int omap1_mbox_fifo_full(struct omap_mbox *mbox) -{ - struct omap_mbox1_fifo *fifo = - &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; - - return mbox_read_reg(fifo->flag); -} - -/* irq */ -static void -omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) -{ - if (irq == IRQ_RX) - enable_irq(mbox->irq); -} - -static void -omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) -{ - if (irq == IRQ_RX) - disable_irq(mbox->irq); -} - -static int -omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) -{ - if (irq == IRQ_TX) - return 0; - return 1; -} - -static struct omap_mbox_ops omap1_mbox_ops = { - .type = OMAP_MBOX_TYPE1, - .fifo_read = omap1_mbox_fifo_read, - .fifo_write = omap1_mbox_fifo_write, - .fifo_empty = omap1_mbox_fifo_empty, - .fifo_full = omap1_mbox_fifo_full, - .enable_irq = omap1_mbox_enable_irq, - .disable_irq = omap1_mbox_disable_irq, - .is_irq = omap1_mbox_is_irq, -}; - -/* FIXME: the following struct should be created automatically by the user id */ - -/* DSP */ -static struct omap_mbox1_priv omap1_mbox_dsp_priv = { - .tx_fifo = { - .cmd = MAILBOX_ARM2DSP1b, - .data = MAILBOX_ARM2DSP1, - .flag = MAILBOX_ARM2DSP1_Flag, - }, - .rx_fifo = { - .cmd = MAILBOX_DSP2ARM1b, - .data = MAILBOX_DSP2ARM1, - .flag = MAILBOX_DSP2ARM1_Flag, - }, -}; - -static struct omap_mbox mbox_dsp_info = { - .name = "dsp", - .ops = &omap1_mbox_ops, - .priv = &omap1_mbox_dsp_priv, -}; - -static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL }; - -static int omap1_mbox_probe(struct platform_device *pdev) -{ - struct resource *mem; - int ret; - struct omap_mbox **list; - - list = omap1_mboxes; - list[0]->irq = platform_get_irq_byname(pdev, "dsp"); - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mbox_base = ioremap(mem->start, resource_size(mem)); - if (!mbox_base) - return -ENOMEM; - - ret = omap_mbox_register(&pdev->dev, list); - if (ret) { - iounmap(mbox_base); - return ret; - } - - return 0; -} - -static int omap1_mbox_remove(struct platform_device *pdev) -{ - omap_mbox_unregister(); - iounmap(mbox_base); - return 0; -} - -static struct platform_driver omap1_mbox_driver = { - .probe = omap1_mbox_probe, - .remove = omap1_mbox_remove, - .driver = { - .name = "omap-mailbox", - }, -}; - -static int __init omap1_mbox_init(void) -{ - return platform_driver_register(&omap1_mbox_driver); -} - -static void __exit omap1_mbox_exit(void) -{ - platform_driver_unregister(&omap1_mbox_driver); -} - -module_init(omap1_mbox_init); -module_exit(omap1_mbox_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions"); -MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); -MODULE_ALIAS("platform:omap1-mailbox"); diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index b0d4723c9a9..8ed67f8d176 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -27,7 +27,6 @@ #include <mach/irqs.h> #include "iomap.h" -#include "dma.h" #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) @@ -114,12 +113,12 @@ struct resource omap7xx_mcbsp_res[][6] = { }, { .name = "rx", - .start = OMAP_DMA_MCBSP1_RX, + .start = 9, .flags = IORESOURCE_DMA, }, { .name = "tx", - .start = OMAP_DMA_MCBSP1_TX, + .start = 8, .flags = IORESOURCE_DMA, }, }, @@ -141,12 +140,12 @@ struct resource omap7xx_mcbsp_res[][6] = { }, { .name = "rx", - .start = OMAP_DMA_MCBSP3_RX, + .start = 11, .flags = IORESOURCE_DMA, }, { .name = "tx", - .start = OMAP_DMA_MCBSP3_TX, + .start = 10, .flags = IORESOURCE_DMA, }, }, @@ -191,12 +190,12 @@ struct resource omap15xx_mcbsp_res[][6] = { }, { .name = "rx", - .start = OMAP_DMA_MCBSP1_RX, + .start = 9, .flags = IORESOURCE_DMA, }, { .name = "tx", - .start = OMAP_DMA_MCBSP1_TX, + .start = 8, .flags = IORESOURCE_DMA, }, }, @@ -218,12 +217,12 @@ struct resource omap15xx_mcbsp_res[][6] = { }, { .name = "rx", - .start = OMAP_DMA_MCBSP2_RX, + .start = 17, .flags = IORESOURCE_DMA, }, { .name = "tx", - .start = OMAP_DMA_MCBSP2_TX, + .start = 16, .flags = IORESOURCE_DMA, }, }, @@ -245,12 +244,12 @@ struct resource omap15xx_mcbsp_res[][6] = { }, { .name = "rx", - .start = OMAP_DMA_MCBSP3_RX, + .start = 11, .flags = IORESOURCE_DMA, }, { .name = "tx", - .start = OMAP_DMA_MCBSP3_TX, + .start = 10, .flags = IORESOURCE_DMA, }, }, @@ -298,12 +297,12 @@ struct resource omap16xx_mcbsp_res[][6] = { }, { .name = "rx", - .start = OMAP_DMA_MCBSP1_RX, + .start = 9, .flags = IORESOURCE_DMA, }, { .name = "tx", - .start = OMAP_DMA_MCBSP1_TX, + .start = 8, .flags = IORESOURCE_DMA, }, }, @@ -325,12 +324,12 @@ struct resource omap16xx_mcbsp_res[][6] = { }, { .name = "rx", - .start = OMAP_DMA_MCBSP2_RX, + .start = 17, .flags = IORESOURCE_DMA, }, { .name = "tx", - .start = OMAP_DMA_MCBSP2_TX, + .start = 16, .flags = IORESOURCE_DMA, }, }, @@ -352,12 +351,12 @@ struct resource omap16xx_mcbsp_res[][6] = { }, { .name = "rx", - .start = OMAP_DMA_MCBSP3_RX, + .start = 11, .flags = IORESOURCE_DMA, }, { .name = "tx", - .start = OMAP_DMA_MCBSP3_TX, + .start = 10, .flags = IORESOURCE_DMA, }, }, diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 7a7690ab6cb..34b4c004496 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -37,12 +37,14 @@ #include <linux/suspend.h> #include <linux/sched.h> -#include <linux/proc_fs.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> #include <linux/interrupt.h> #include <linux/sysfs.h> #include <linux/module.h> #include <linux/io.h> #include <linux/atomic.h> +#include <linux/cpu.h> #include <asm/fncpy.h> #include <asm/system_misc.h> @@ -69,7 +71,11 @@ static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; -#ifdef CONFIG_OMAP_32K_TIMER +#ifndef CONFIG_OMAP_32K_TIMER + +static unsigned short enable_dyn_sleep = 0; + +#else static unsigned short enable_dyn_sleep = 1; @@ -117,19 +123,8 @@ void omap1_pm_idle(void) #warning Enable 32kHz OS timer in order to allow sleep states in idle use_idlect1 = use_idlect1 & ~(1 << 9); #else - - while (enable_dyn_sleep) { - -#ifdef CONFIG_CBUS_TAHVO_USB - extern int vbus_active; - /* Clock requirements? */ - if (vbus_active) - break; -#endif + if (enable_dyn_sleep) do_sleep = 1; - break; - } - #endif #ifdef CONFIG_OMAP_DM_TIMER @@ -422,23 +417,12 @@ void omap1_pm_suspend(void) omap_rev()); } -#if defined(DEBUG) && defined(CONFIG_PROC_FS) -static int g_read_completed; - +#ifdef CONFIG_DEBUG_FS /* * Read system PM registers for debugging */ -static int omap_pm_read_proc( - char *page_buffer, - char **my_first_byte, - off_t virtual_start, - int length, - int *eof, - void *data) +static int omap_pm_debug_show(struct seq_file *m, void *v) { - int my_buffer_offset = 0; - char * const my_base = page_buffer; - ARM_SAVE(ARM_CKCTL); ARM_SAVE(ARM_IDLECT1); ARM_SAVE(ARM_IDLECT2); @@ -479,10 +463,7 @@ static int omap_pm_read_proc( MPUI1610_SAVE(EMIFS_CONFIG); } - if (virtual_start == 0) { - g_read_completed = 0; - - my_buffer_offset += sprintf(my_base + my_buffer_offset, + seq_printf(m, "ARM_CKCTL_REG: 0x%-8x \n" "ARM_IDLECT1_REG: 0x%-8x \n" "ARM_IDLECT2_REG: 0x%-8x \n" @@ -512,8 +493,8 @@ static int omap_pm_read_proc( ULPD_SHOW(ULPD_STATUS_REQ), ULPD_SHOW(ULPD_POWER_CTRL)); - if (cpu_is_omap7xx()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, + if (cpu_is_omap7xx()) { + seq_printf(m, "MPUI7XX_CTRL_REG 0x%-8x \n" "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n" "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n" @@ -526,8 +507,8 @@ static int omap_pm_read_proc( MPUI7XX_SHOW(MPUI_DSP_API_CONFIG), MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG), MPUI7XX_SHOW(EMIFS_CONFIG)); - } else if (cpu_is_omap15xx()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, + } else if (cpu_is_omap15xx()) { + seq_printf(m, "MPUI1510_CTRL_REG 0x%-8x \n" "MPUI1510_DSP_STATUS_REG: 0x%-8x \n" "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n" @@ -540,8 +521,8 @@ static int omap_pm_read_proc( MPUI1510_SHOW(MPUI_DSP_API_CONFIG), MPUI1510_SHOW(EMIFF_SDRAM_CONFIG), MPUI1510_SHOW(EMIFS_CONFIG)); - } else if (cpu_is_omap16xx()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, + } else if (cpu_is_omap16xx()) { + seq_printf(m, "MPUI1610_CTRL_REG 0x%-8x \n" "MPUI1610_DSP_STATUS_REG: 0x%-8x \n" "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n" @@ -554,28 +535,37 @@ static int omap_pm_read_proc( MPUI1610_SHOW(MPUI_DSP_API_CONFIG), MPUI1610_SHOW(EMIFF_SDRAM_CONFIG), MPUI1610_SHOW(EMIFS_CONFIG)); - } - - g_read_completed++; - } else if (g_read_completed >= 1) { - *eof = 1; - return 0; } - g_read_completed++; - *my_first_byte = page_buffer; - return my_buffer_offset; + return 0; } -static void omap_pm_init_proc(void) +static int omap_pm_debug_open(struct inode *inode, struct file *file) { - /* XXX Appears to leak memory */ - create_proc_read_entry("driver/omap_pm", - S_IWUSR | S_IRUGO, NULL, - omap_pm_read_proc, NULL); + return single_open(file, omap_pm_debug_show, + &inode->i_private); } -#endif /* DEBUG && CONFIG_PROC_FS */ +static const struct file_operations omap_pm_debug_fops = { + .open = omap_pm_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void omap_pm_init_debugfs(void) +{ + struct dentry *d; + + d = debugfs_create_dir("pm_debug", NULL); + if (!d) + return; + + (void) debugfs_create_file("omap_pm", S_IWUSR | S_IRUGO, + d, NULL, &omap_pm_debug_fops); +} + +#endif /* CONFIG_DEBUG_FS */ /* * omap_pm_prepare - Do preliminary suspend work. @@ -584,8 +574,7 @@ static void omap_pm_init_proc(void) static int omap_pm_prepare(void) { /* We cannot sleep in idle until we have resumed */ - disable_hlt(); - + cpu_idle_poll_ctrl(true); return 0; } @@ -621,7 +610,7 @@ static int omap_pm_enter(suspend_state_t state) static void omap_pm_finish(void) { - enable_hlt(); + cpu_idle_poll_ctrl(false); } @@ -632,7 +621,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev) static struct irqaction omap_wakeup_irq = { .name = "peripheral wakeup", - .flags = IRQF_DISABLED, .handler = omap_wakeup_interrupt }; @@ -701,8 +689,8 @@ static int __init omap_pm_init(void) suspend_set_ops(&omap_pm_ops); -#if defined(DEBUG) && defined(CONFIG_PROC_FS) - omap_pm_init_proc(); +#ifdef CONFIG_DEBUG_FS + omap_pm_init_debugfs(); #endif #ifdef CONFIG_OMAP_32K_TIMER diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c index 5eebd7e889d..72bf4bf4a70 100644 --- a/arch/arm/mach-omap1/reset.c +++ b/arch/arm/mach-omap1/reset.c @@ -3,6 +3,7 @@ */ #include <linux/kernel.h> #include <linux/io.h> +#include <linux/reboot.h> #include <mach/hardware.h> @@ -22,7 +23,7 @@ #define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5 -void omap1_restart(char mode, const char *cmd) +void omap1_restart(enum reboot_mode mode, const char *cmd) { /* * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 4d4816fd6fc..a7588cfd028 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -43,9 +43,9 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h> +#include <linux/sched_clock.h> #include <asm/irq.h> -#include <asm/sched_clock.h> #include <mach/hardware.h> #include <asm/mach/irq.h> @@ -145,7 +145,6 @@ static void omap_mpu_set_mode(enum clock_event_mode mode, static struct clock_event_device clockevent_mpu_timer1 = { .name = "mpu_timer1", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .set_next_event = omap_mpu_set_next_event, .set_mode = omap_mpu_set_mode, }; @@ -161,7 +160,7 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id) static struct irqaction omap_mpu_timer1_irq = { .name = "mpu_timer1", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = omap_mpu_timer1_interrupt, }; @@ -170,15 +169,9 @@ static __init void omap_init_mpu_timer(unsigned long rate) setup_irq(INT_TIMER1, &omap_mpu_timer1_irq); omap_mpu_timer_start(0, (rate / HZ) - 1, 1); - clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC, - clockevent_mpu_timer1.shift); - clockevent_mpu_timer1.max_delta_ns = - clockevent_delta2ns(-1, &clockevent_mpu_timer1); - clockevent_mpu_timer1.min_delta_ns = - clockevent_delta2ns(1, &clockevent_mpu_timer1); - clockevent_mpu_timer1.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_mpu_timer1); + clockevents_config_and_register(&clockevent_mpu_timer1, rate, + 1, -1); } @@ -188,7 +181,7 @@ static __init void omap_init_mpu_timer(unsigned long rate) * --------------------------------------------------------------------------- */ -static u32 notrace omap_mpu_read_sched_clock(void) +static u64 notrace omap_mpu_read_sched_clock(void) { return ~omap_mpu_timer_read(1); } @@ -200,7 +193,7 @@ static void __init omap_init_clocksource(unsigned long rate) "%s: can't register clocksource!\n"; omap_mpu_timer_start(1, ~0, 1); - setup_sched_clock(omap_mpu_read_sched_clock, 32, rate); + sched_clock_register(omap_mpu_read_sched_clock, 32, rate); if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate, 300, 32, clocksource_mmio_readl_down)) @@ -236,12 +229,8 @@ static inline void omap_mpu_timer_init(void) * Timer initialization * --------------------------------------------------------------------------- */ -static void __init omap1_timer_init(void) +void __init omap1_timer_init(void) { if (omap_32k_timer_init() != 0) omap_mpu_timer_init(); } - -struct sys_timer omap1_timer = { - .init = omap1_timer_init, -}; diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 41152fadd4c..107e7ab3edb 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -140,7 +140,6 @@ static void omap_32k_timer_set_mode(enum clock_event_mode mode, static struct clock_event_device clockevent_32k_timer = { .name = "32k-timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .set_next_event = omap_32k_timer_set_next_event, .set_mode = omap_32k_timer_set_mode, }; @@ -157,7 +156,7 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id) static struct irqaction omap_32k_timer_irq = { .name = "32KHz timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = omap_32k_timer_interrupt, }; @@ -165,16 +164,9 @@ static __init void omap_init_32k_timer(void) { setup_irq(INT_OS_TIMER, &omap_32k_timer_irq); - clockevent_32k_timer.mult = div_sc(OMAP_32K_TICKS_PER_SEC, - NSEC_PER_SEC, - clockevent_32k_timer.shift); - clockevent_32k_timer.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_32k_timer); - clockevent_32k_timer.min_delta_ns = - clockevent_delta2ns(1, &clockevent_32k_timer); - clockevent_32k_timer.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_32k_timer); + clockevents_config_and_register(&clockevent_32k_timer, + OMAP_32K_TICKS_PER_SEC, 1, 0xfffffffe); } /* diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 1a1db5971cd..4118db50d5e 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -123,7 +123,7 @@ omap_otg_init(struct omap_usb_config *config) syscon = omap_readl(OTG_SYSCON_1); syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->otg || config->register_dev) { struct platform_device *udc_device = config->udc_device; int status; @@ -169,7 +169,7 @@ omap_otg_init(struct omap_usb_config *config) void omap_otg_init(struct omap_usb_config *config) {} #endif -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) static struct resource udc_resources[] = { /* order is significant! */ @@ -600,7 +600,7 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK)) cpu_relax(); -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->register_dev) { int status; |