diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-voiceblue.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-voiceblue.c | 69 |
1 files changed, 27 insertions, 42 deletions
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 65d24204937..4677a9ccb3c 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -13,6 +13,7 @@ */ #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -24,25 +25,26 @@ #include <linux/serial_8250.h> #include <linux/serial_reg.h> #include <linux/smc91x.h> +#include <linux/export.h> +#include <linux/reboot.h> -#include <mach/hardware.h> -#include <mach/system.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board-voiceblue.h> -#include <plat/common.h> -#include <mach/gpio.h> -#include <plat/flash.h> -#include <plat/mux.h> -#include <plat/tc.h> -#include <plat/usb.h> +#include <mach/board-voiceblue.h> +#include <mach/flash.h> +#include <mach/mux.h> +#include <mach/tc.h> + +#include <mach/hardware.h> +#include <mach/usb.h> + +#include "common.h" static struct plat_serial8250_port voiceblue_ports[] = { { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), - .irq = OMAP_GPIO_IRQ(12), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -50,7 +52,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000), - .irq = OMAP_GPIO_IRQ(13), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -58,7 +59,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000), - .irq = OMAP_GPIO_IRQ(14), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -66,7 +66,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000), - .irq = OMAP_GPIO_IRQ(15), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -78,9 +77,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { static struct platform_device serial_device = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = voiceblue_ports, - }, }; static int __init ext_uart_init(void) @@ -88,6 +84,11 @@ static int __init ext_uart_init(void) if (!machine_is_voiceblue()) return -ENODEV; + voiceblue_ports[0].irq = gpio_to_irq(12); + voiceblue_ports[1].irq = gpio_to_irq(13); + voiceblue_ports[2].irq = gpio_to_irq(14); + voiceblue_ports[3].irq = gpio_to_irq(15); + serial_device.dev.platform_data = voiceblue_ports; return platform_device_register(&serial_device); } arch_initcall(ext_uart_init); @@ -126,8 +127,6 @@ static struct resource voiceblue_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(8), - .end = OMAP_GPIO_IRQ(8), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -156,20 +155,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = { .pins[2] = 6, }; -static struct omap_board_config_kernel voiceblue_config[] = { -}; - -static void __init voiceblue_init_irq(void) -{ - omap1_init_common_hw(); - omap_init_irq(); -} - -static void __init voiceblue_map_io(void) -{ - omap1_map_common_io(); -} - #define MACHINE_PANICED 1 #define MACHINE_REBOOTING 2 #define MACHINE_REBOOT 4 @@ -231,7 +216,7 @@ void voiceblue_wdt_ping(void) gpio_set_value(0, wdt_gpio_state); } -static void voiceblue_reset(char mode, const char *cmd) +static void voiceblue_restart(enum reboot_mode mode, const char *cmd) { /* * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 @@ -284,9 +269,9 @@ static void __init voiceblue_init(void) irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); + voiceblue_smc91x_resources[1].start = gpio_to_irq(8); + voiceblue_smc91x_resources[1].end = gpio_to_irq(8); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); - omap_board_config = voiceblue_config; - omap_board_config_size = ARRAY_SIZE(voiceblue_config); omap_serial_init(); omap1_usb_init(&voiceblue_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); @@ -295,16 +280,16 @@ static void __init voiceblue_init(void) * (it is connected through invertor) */ omap_writeb(0x00, OMAP_LPG1_LCR); omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ - - arch_reset = voiceblue_reset; } MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") /* Maintainer: Ladislav Michl <michl@2n.cz> */ - .boot_params = 0x10000100, - .map_io = voiceblue_map_io, - .reserve = omap_reserve, - .init_irq = voiceblue_init_irq, + .atag_offset = 0x100, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, + .init_irq = omap1_init_irq, .init_machine = voiceblue_init, - .timer = &omap_timer, + .init_late = omap1_init_late, + .init_time = omap1_timer_init, + .restart = voiceblue_restart, MACHINE_END |