diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-palmte.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-palmte.c | 298 |
1 files changed, 70 insertions, 228 deletions
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index ca1a4bf78a1..3b8e98f4353 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -16,62 +16,73 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> -#include <linux/spi/tsc2102.h> #include <linux/interrupt.h> #include <linux/apm-emulation.h> +#include <linux/omapfb.h> +#include <linux/platform_data/omap1_bl.h> -#include <asm/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/flash.h> - -#include <asm/arch/gpio.h> -#include <asm/arch/mux.h> -#include <asm/arch/usb.h> -#include <asm/arch/tc.h> -#include <asm/arch/dma.h> -#include <asm/arch/board.h> -#include <asm/arch/irda.h> -#include <asm/arch/keypad.h> -#include <asm/arch/common.h> -#include <asm/arch/mcbsp.h> -#include <asm/arch/omap-alsa.h> -static void __init omap_palmte_init_irq(void) -{ - omap1_init_common_hw(); - omap_init_irq(); - omap_gpio_init(); -} - -static const int palmte_keymap[] = { +#include <mach/flash.h> +#include <mach/mux.h> +#include <mach/tc.h> +#include <linux/omap-dma.h> +#include <linux/platform_data/keypad-omap.h> + +#include <mach/hardware.h> +#include <mach/usb.h> + +#include "common.h" + +#define PALMTE_USBDETECT_GPIO 0 +#define PALMTE_USB_OR_DC_GPIO 1 +#define PALMTE_TSC_GPIO 4 +#define PALMTE_PINTDAV_GPIO 6 +#define PALMTE_MMC_WP_GPIO 8 +#define PALMTE_MMC_POWER_GPIO 9 +#define PALMTE_HDQ_GPIO 11 +#define PALMTE_HEADPHONES_GPIO 14 +#define PALMTE_SPEAKER_GPIO 15 +#define PALMTE_DC_GPIO OMAP_MPUIO(2) +#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4) +#define PALMTE_MMC1_GPIO OMAP_MPUIO(6) +#define PALMTE_MMC2_GPIO OMAP_MPUIO(7) +#define PALMTE_MMC3_GPIO OMAP_MPUIO(11) + +static const unsigned int palmte_keymap[] = { KEY(0, 0, KEY_F1), /* Calendar */ - KEY(0, 1, KEY_F2), /* Contacts */ - KEY(0, 2, KEY_F3), /* Tasks List */ - KEY(0, 3, KEY_F4), /* Note Pad */ - KEY(0, 4, KEY_POWER), - KEY(1, 0, KEY_LEFT), + KEY(1, 0, KEY_F2), /* Contacts */ + KEY(2, 0, KEY_F3), /* Tasks List */ + KEY(3, 0, KEY_F4), /* Note Pad */ + KEY(4, 0, KEY_POWER), + KEY(0, 1, KEY_LEFT), KEY(1, 1, KEY_DOWN), - KEY(1, 2, KEY_UP), - KEY(1, 3, KEY_RIGHT), - KEY(1, 4, KEY_CENTER), - 0, + KEY(2, 1, KEY_UP), + KEY(3, 1, KEY_RIGHT), + KEY(4, 1, KEY_ENTER), +}; + +static const struct matrix_keymap_data palmte_keymap_data = { + .keymap = palmte_keymap, + .keymap_size = ARRAY_SIZE(palmte_keymap), }; static struct omap_kp_platform_data palmte_kp_data = { .rows = 8, .cols = 8, - .keymap = (int *) palmte_keymap, - .rep = 1, + .keymap_data = &palmte_keymap_data, + .rep = true, .delay = 12, }; @@ -114,9 +125,9 @@ static struct mtd_partition palmte_rom_partitions[] = { }, }; -static struct flash_platform_data palmte_rom_data = { - .map_name = "map_rom", +static struct physmap_flash_data palmte_rom_data = { .width = 2, + .set_vpp = omap1_set_vpp, .parts = palmte_rom_partitions, .nr_parts = ARRAY_SIZE(palmte_rom_partitions), }; @@ -128,7 +139,7 @@ static struct resource palmte_rom_resource = { }; static struct platform_device palmte_rom_device = { - .name = "omapflash", + .name = "physmap-flash", .id = -1, .dev = { .platform_data = &palmte_rom_data, @@ -154,40 +165,11 @@ static struct platform_device palmte_backlight_device = { }, }; -static struct omap_irda_config palmte_irda_config = { - .transceiver_cap = IR_SIRMODE, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource palmte_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device palmte_irda_device = { - .name = "omapirda", - .id = -1, - .dev = { - .platform_data = &palmte_irda_config, - }, - .num_resources = ARRAY_SIZE(palmte_irda_resources), - .resource = palmte_irda_resources, -}; - static struct platform_device *palmte_devices[] __initdata = { &palmte_rom_device, &palmte_kp_device, &palmte_lcd_device, &palmte_backlight_device, - &palmte_irda_device, }; static struct omap_usb_config palmte_usb_config __initdata = { @@ -196,205 +178,65 @@ static struct omap_usb_config palmte_usb_config __initdata = { .pins[0] = 2, }; -static struct omap_mmc_config palmte_mmc_config __initdata = { - .mmc[0] = { - .enabled = 1, - .wp_pin = PALMTE_MMC_WP_GPIO, - .power_pin = PALMTE_MMC_POWER_GPIO, - .switch_pin = PALMTE_MMC_SWITCH_GPIO, - }, -}; - static struct omap_lcd_config palmte_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_uart_config palmte_uart_config __initdata = { - .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), -}; - -static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = { - .spcr2 = FRST | GRST | XRST | XINTM(3), - .xcr2 = XDATDLY(1) | XFIG, - .xcr1 = XWDLEN1(OMAP_MCBSP_WORD_32), - .pcr0 = SCLKME | FSXP | CLKXP, -}; - -static struct omap_alsa_codec_config palmte_alsa_config = { - .name = "TSC2102 audio", - .mcbsp_regs_alsa = &palmte_mcbsp1_regs, - .codec_configure_dev = NULL, /* tsc2102_configure, */ - .codec_set_samplerate = NULL, /* tsc2102_set_samplerate, */ - .codec_clock_setup = NULL, /* tsc2102_clock_setup, */ - .codec_clock_on = NULL, /* tsc2102_clock_on, */ - .codec_clock_off = NULL, /* tsc2102_clock_off, */ - .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */ -}; - -#ifdef CONFIG_APM -/* - * Values measured in 10 minute intervals averaged over 10 samples. - * May differ slightly from device to device but should be accurate - * enough to give basic idea of battery life left and trigger - * potential alerts. - */ -static const int palmte_battery_sample[] = { - 2194, 2157, 2138, 2120, - 2104, 2089, 2075, 2061, - 2048, 2038, 2026, 2016, - 2008, 1998, 1989, 1980, - 1970, 1958, 1945, 1928, - 1910, 1888, 1860, 1827, - 1791, 1751, 1709, 1656, -}; - -#define INTERVAL 10 -#define BATTERY_HIGH_TRESHOLD 66 -#define BATTERY_LOW_TRESHOLD 33 - -static void palmte_get_power_status(struct apm_power_info *info, int *battery) -{ - int charging, batt, hi, lo, mid; - - charging = !omap_get_gpio_datain(PALMTE_DC_GPIO); - batt = battery[0]; - if (charging) - batt -= 60; - - hi = ARRAY_SIZE(palmte_battery_sample); - lo = 0; - - info->battery_flag = 0; - info->units = APM_UNITS_MINS; - - if (batt > palmte_battery_sample[lo]) { - info->battery_life = 100; - info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample); - } else if (batt <= palmte_battery_sample[hi - 1]) { - info->battery_life = 0; - info->time = 0; - } else { - while (hi > lo + 1) { - mid = (hi + lo) >> 1; - if (batt <= palmte_battery_sample[mid]) - lo = mid; - else - hi = mid; - } - - mid = palmte_battery_sample[lo] - palmte_battery_sample[hi]; - hi = palmte_battery_sample[lo] - batt; - info->battery_life = 100 - (100 * lo + 100 * hi / mid) / - ARRAY_SIZE(palmte_battery_sample); - info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) - - lo) - INTERVAL * hi / mid; - } - - if (charging) { - info->ac_line_status = APM_AC_ONLINE; - info->battery_status = APM_BATTERY_STATUS_CHARGING; - info->battery_flag |= APM_BATTERY_FLAG_CHARGING; - } else { - info->ac_line_status = APM_AC_OFFLINE; - if (info->battery_life > BATTERY_HIGH_TRESHOLD) - info->battery_status = APM_BATTERY_STATUS_HIGH; - else if (info->battery_life > BATTERY_LOW_TRESHOLD) - info->battery_status = APM_BATTERY_STATUS_LOW; - else - info->battery_status = APM_BATTERY_STATUS_CRITICAL; - } - - if (info->battery_life > BATTERY_HIGH_TRESHOLD) - info->battery_flag |= APM_BATTERY_FLAG_HIGH; - else if (info->battery_life > BATTERY_LOW_TRESHOLD) - info->battery_flag |= APM_BATTERY_FLAG_LOW; - else - info->battery_flag |= APM_BATTERY_FLAG_CRITICAL; -} -#else -#define palmte_get_power_status NULL -#endif - -static struct tsc2102_config palmte_tsc2102_config = { - .use_internal = 0, - .monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP, - .temp_at25c = { 2200, 2615 }, - .apm_report = palmte_get_power_status, - .alsa_config = &palmte_alsa_config, -}; - -static struct omap_board_config_kernel palmte_config[] __initdata = { - { OMAP_TAG_USB, &palmte_usb_config }, - { OMAP_TAG_MMC, &palmte_mmc_config }, - { OMAP_TAG_LCD, &palmte_lcd_config }, - { OMAP_TAG_UART, &palmte_uart_config }, -}; - static struct spi_board_info palmte_spi_info[] __initdata = { { .modalias = "tsc2102", .bus_num = 2, /* uWire (officially) */ .chip_select = 0, /* As opposed to 3 */ - .irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO), - .platform_data = &palmte_tsc2102_config, .max_speed_hz = 8000000, }, }; -static void palmte_headphones_detect(void *data, int state) -{ - if (state) { - /* Headphones connected, disable speaker */ - omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0); - printk(KERN_INFO "PM: speaker off\n"); - } else { - /* Headphones unplugged, re-enable speaker */ - omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1); - printk(KERN_INFO "PM: speaker on\n"); - } -} - static void __init palmte_misc_gpio_setup(void) { /* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */ - if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) { + if (gpio_request(PALMTE_PINTDAV_GPIO, "TSC2102 PINTDAV") < 0) { printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n"); return; } - omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1); + gpio_direction_input(PALMTE_PINTDAV_GPIO); /* Set USB-or-DC-IN pin as input (unused) */ - if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) { + if (gpio_request(PALMTE_USB_OR_DC_GPIO, "USB/DC-IN") < 0) { printk(KERN_ERR "Could not reserve cable signal GPIO!\n"); return; } - omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1); + gpio_direction_input(PALMTE_USB_OR_DC_GPIO); } static void __init omap_palmte_init(void) { - omap_board_config = palmte_config; - omap_board_config_size = ARRAY_SIZE(palmte_config); + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices)); + palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO); spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); palmte_misc_gpio_setup(); omap_serial_init(); + omap1_usb_init(&palmte_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); -} -static void __init omap_palmte_map_io(void) -{ - omap1_map_common_io(); + omapfb_set_lcd_config(&palmte_lcd_config); } MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, - .boot_params = 0x10000100, - .map_io = omap_palmte_map_io, - .init_irq = omap_palmte_init_irq, + .atag_offset = 0x100, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, + .init_irq = omap1_init_irq, .init_machine = omap_palmte_init, - .timer = &omap_timer, + .init_late = omap1_init_late, + .init_time = omap1_timer_init, + .restart = omap1_restart, MACHINE_END |