diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-h3.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-h3.c | 382 |
1 files changed, 308 insertions, 74 deletions
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index d665efc1c34..bfed4f92866 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -13,35 +13,91 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - -#include <linux/config.h> +#include <linux/gpio.h> #include <linux/types.h> #include <linux/init.h> #include <linux/major.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/errno.h> +#include <linux/workqueue.h> +#include <linux/i2c.h> #include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/spi/spi.h> +#include <linux/i2c/tps65010.h> +#include <linux/smc91x.h> +#include <linux/omapfb.h> +#include <linux/platform_data/gpio-omap.h> +#include <linux/leds.h> #include <asm/setup.h> #include <asm/page.h> -#include <asm/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/arch/gpio.h> -#include <asm/arch/irqs.h> -#include <asm/arch/mux.h> -#include <asm/arch/tc.h> -#include <asm/arch/usb.h> -#include <asm/arch/common.h> +#include <mach/mux.h> +#include <mach/tc.h> +#include <linux/platform_data/keypad-omap.h> +#include <linux/omap-dma.h> +#include <mach/flash.h> + +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/usb.h> + +#include "common.h" +#include "board-h3.h" + +/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ +#define OMAP1710_ETHR_START 0x04000300 + +#define H3_TS_GPIO 48 + +static const unsigned int h3_keymap[] = { + KEY(0, 0, KEY_LEFT), + KEY(1, 0, KEY_RIGHT), + KEY(2, 0, KEY_3), + KEY(3, 0, KEY_F10), + KEY(4, 0, KEY_F5), + KEY(5, 0, KEY_9), + KEY(0, 1, KEY_DOWN), + KEY(1, 1, KEY_UP), + KEY(2, 1, KEY_2), + KEY(3, 1, KEY_F9), + KEY(4, 1, KEY_F7), + KEY(5, 1, KEY_0), + KEY(0, 2, KEY_ENTER), + KEY(1, 2, KEY_6), + KEY(2, 2, KEY_1), + KEY(3, 2, KEY_F2), + KEY(4, 2, KEY_F6), + KEY(5, 2, KEY_HOME), + KEY(0, 3, KEY_8), + KEY(1, 3, KEY_5), + KEY(2, 3, KEY_F12), + KEY(3, 3, KEY_F3), + KEY(4, 3, KEY_F8), + KEY(5, 3, KEY_END), + KEY(0, 4, KEY_7), + KEY(1, 4, KEY_4), + KEY(2, 4, KEY_F11), + KEY(3, 4, KEY_F1), + KEY(4, 4, KEY_F4), + KEY(5, 4, KEY_ESC), + KEY(0, 5, KEY_F13), + KEY(1, 5, KEY_F14), + KEY(2, 5, KEY_F15), + KEY(3, 5, KEY_F16), + KEY(4, 5, KEY_SLEEP), +}; -extern int omap_gpio_init(void); -static struct mtd_partition h3_partitions[] = { +static struct mtd_partition nor_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { .name = "bootloader", @@ -72,26 +128,101 @@ static struct mtd_partition h3_partitions[] = { } }; -static struct flash_platform_data h3_flash_data = { - .map_name = "cfi_probe", +static struct physmap_flash_data nor_data = { .width = 2, - .parts = h3_partitions, - .nr_parts = ARRAY_SIZE(h3_partitions), + .set_vpp = omap1_set_vpp, + .parts = nor_partitions, + .nr_parts = ARRAY_SIZE(nor_partitions), }; -static struct resource h3_flash_resource = { +static struct resource nor_resource = { /* This is on CS3, wherever it's mapped */ .flags = IORESOURCE_MEM, }; -static struct platform_device flash_device = { - .name = "omapflash", +static struct platform_device nor_device = { + .name = "physmap-flash", .id = 0, .dev = { - .platform_data = &h3_flash_data, + .platform_data = &nor_data, }, .num_resources = 1, - .resource = &h3_flash_resource, + .resource = &nor_resource, +}; + +static struct mtd_partition nand_partitions[] = { +#if 0 + /* REVISIT: enable these partitions if you make NAND BOOT work */ + { + .name = "xloader", + .offset = 0, + .size = 64 * 1024, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "bootloader", + .offset = MTDPART_OFS_APPEND, + .size = 256 * 1024, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 192 * 1024, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 2 * SZ_1M, + }, +#endif + { + .name = "filesystem", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + +#define H3_NAND_RB_GPIO_PIN 10 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(H3_NAND_RB_GPIO_PIN); +} + +static struct platform_nand_data nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(nand_partitions), + .partitions = nand_partitions, + .options = NAND_SAMSUNG_LP_OPTIONS, + }, + .ctrl = { + .cmd_ctrl = omap1_nand_cmd_ctl, + .dev_ready = nand_dev_ready, + + }, +}; + +static struct resource nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nand_device = { + .name = "gen_nand", + .id = 0, + .dev = { + .platform_data = &nand_platdata, + }, + .num_resources = 1, + .resource = &nand_resource, +}; + +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, }; static struct resource smc91x_resources[] = { @@ -101,19 +232,29 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(40), - .end = OMAP_GPIO_IRQ(40), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; +static void __init h3_init_smc91x(void) +{ + omap_cfg_reg(W15_1710_GPIO40); + if (gpio_request(40, "SMC91x irq") < 0) { + printk("Error requesting gpio 40 for smc91x irq\n"); + return; + } +} + #define GPTIMER_BASE 0xFFFB1400 #define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800)) #define GPTIMER_REGS_SIZE 0x46 @@ -138,17 +279,94 @@ static struct platform_device intlat_device = { .resource = intlat_resources, }; +static struct resource h3_kp_resources[] = { + [0] = { + .start = INT_KEYBOARD, + .end = INT_KEYBOARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct matrix_keymap_data h3_keymap_data = { + .keymap = h3_keymap, + .keymap_size = ARRAY_SIZE(h3_keymap), +}; + +static struct omap_kp_platform_data h3_kp_data = { + .rows = 8, + .cols = 8, + .keymap_data = &h3_keymap_data, + .rep = true, + .delay = 9, + .dbounce = true, +}; + +static struct platform_device h3_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &h3_kp_data, + }, + .num_resources = ARRAY_SIZE(h3_kp_resources), + .resource = h3_kp_resources, +}; + +static struct platform_device h3_lcd_device = { + .name = "lcd_h3", + .id = -1, +}; + +static struct spi_board_info h3_spi_board_info[] __initdata = { + [0] = { + .modalias = "tsc2101", + .bus_num = 2, + .chip_select = 0, + .max_speed_hz = 16000000, + /* .platform_data = &tsc_platform_data, */ + }, +}; + +static struct gpio_led h3_gpio_led_pins[] = { + { + .name = "h3:red", + .default_trigger = "heartbeat", + .gpio = 3, + }, + { + .name = "h3:green", + .default_trigger = "cpu0", + .gpio = OMAP_MPUIO(4), + }, +}; + +static struct gpio_led_platform_data h3_gpio_led_data = { + .leds = h3_gpio_led_pins, + .num_leds = ARRAY_SIZE(h3_gpio_led_pins), +}; + +static struct platform_device h3_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &h3_gpio_led_data, + }, +}; + static struct platform_device *devices[] __initdata = { - &flash_device, + &nor_device, + &nand_device, &smc91x_device, &intlat_device, + &h3_kp_device, + &h3_lcd_device, + &h3_gpio_leds, }; static struct omap_usb_config h3_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ @@ -158,68 +376,84 @@ static struct omap_usb_config h3_usb_config __initdata = { .pins[1] = 3, }; -static struct omap_mmc_config h3_mmc_config __initdata = { - .mmc[0] = { - .enabled = 1, - .power_pin = -1, /* tps65010 GPIO4 */ - .switch_pin = OMAP_MPUIO(1), - }, -}; - -static struct omap_uart_config h3_uart_config __initdata = { - .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), -}; - static struct omap_lcd_config h3_lcd_config __initdata = { - .panel_name = "h3", .ctrl_name = "internal", }; -static struct omap_board_config_kernel h3_config[] = { - { OMAP_TAG_USB, &h3_usb_config }, - { OMAP_TAG_MMC, &h3_mmc_config }, - { OMAP_TAG_UART, &h3_uart_config }, - { OMAP_TAG_LCD, &h3_lcd_config }, +static struct i2c_board_info __initdata h3_i2c_board_info[] = { + { + I2C_BOARD_INFO("tps65013", 0x48), + }, + { + I2C_BOARD_INFO("isp1301_omap", 0x2d), + }, }; static void __init h3_init(void) { - h3_flash_resource.end = h3_flash_resource.start = omap_cs3_phys(); - h3_flash_resource.end += OMAP_CS3_SIZE - 1; - (void) platform_add_devices(devices, ARRAY_SIZE(devices)); - omap_board_config = h3_config; - omap_board_config_size = ARRAY_SIZE(h3_config); - omap_serial_init(); -} + h3_init_smc91x(); -static void __init h3_init_smc91x(void) -{ - omap_cfg_reg(W15_1710_GPIO40); - if (omap_request_gpio(40) < 0) { - printk("Error requesting gpio 40 for smc91x irq\n"); - return; - } -} + /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped + * to address 0 by a dip switch), NAND on CS2B. The NAND driver will + * notice whether a NAND chip is enabled at probe time. + * + * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND + * (which on H2 may be 16bit) on CS3. Try detecting that in code here, + * to avoid probing every possible flash configuration... + */ + nor_resource.end = nor_resource.start = omap_cs3_phys(); + nor_resource.end += SZ_32M - 1; -void h3_init_irq(void) -{ - omap_init_irq(); - omap_gpio_init(); - h3_init_smc91x(); -} + nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS; + nand_resource.end += SZ_4K - 1; + BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0); + gpio_direction_input(H3_NAND_RB_GPIO_PIN); -static void __init h3_map_io(void) -{ - omap_map_common_io(); + /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ + /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ + omap_cfg_reg(V2_1710_GPIO10); + + /* Mux pins for keypad */ + omap_cfg_reg(F18_1610_KBC0); + omap_cfg_reg(D20_1610_KBC1); + omap_cfg_reg(D19_1610_KBC2); + omap_cfg_reg(E18_1610_KBC3); + omap_cfg_reg(C21_1610_KBC4); + omap_cfg_reg(G18_1610_KBR0); + omap_cfg_reg(F19_1610_KBR1); + omap_cfg_reg(H14_1610_KBR2); + omap_cfg_reg(E20_1610_KBR3); + omap_cfg_reg(E19_1610_KBR4); + omap_cfg_reg(N19_1610_KBR5); + + /* GPIO based LEDs */ + omap_cfg_reg(P18_1610_GPIO3); + omap_cfg_reg(MPUIO4); + + smc91x_resources[1].start = gpio_to_irq(40); + smc91x_resources[1].end = gpio_to_irq(40); + platform_add_devices(devices, ARRAY_SIZE(devices)); + h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO); + spi_register_board_info(h3_spi_board_info, + ARRAY_SIZE(h3_spi_board_info)); + omap_serial_init(); + h3_i2c_board_info[1].irq = gpio_to_irq(14); + omap_register_i2c_bus(1, 100, h3_i2c_board_info, + ARRAY_SIZE(h3_i2c_board_info)); + omap1_usb_init(&h3_usb_config); + h3_mmc_init(); + + omapfb_set_lcd_config(&h3_lcd_config); } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") /* Maintainer: Texas Instruments, Inc. */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, - .boot_params = 0x10000100, - .map_io = h3_map_io, - .init_irq = h3_init_irq, + .atag_offset = 0x100, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, + .init_irq = omap1_init_irq, .init_machine = h3_init, - .timer = &omap_timer, + .init_late = omap1_init_late, + .init_time = omap1_timer_init, + .restart = omap1_restart, MACHINE_END |