diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-fsample.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-fsample.c | 61 |
1 files changed, 18 insertions, 43 deletions
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 0b9464b4121..702d58039cc 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -21,19 +21,22 @@ #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/tc.h> -#include <plat/mux.h> -#include <plat/flash.h> -#include <plat/fpga.h> -#include <plat/keypad.h> +#include <mach/tc.h> +#include <mach/mux.h> +#include <mach/flash.h> +#include <linux/platform_data/keypad-omap.h> + +#include <mach/hardware.h> + +#include "iomap.h" #include "common.h" -#include <plat/board.h> +#include "fpga.h" /* fsample is pretty close to p2-sample */ @@ -120,9 +123,9 @@ static struct resource smc91x_resources[] = { static void __init fsample_init_smc91x(void) { - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } @@ -181,20 +184,6 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long mask; - - if (cmd == NAND_CMD_NONE) - return; - - mask = (ctrl & NAND_CLE) ? 0x02 : 0; - if (ctrl & NAND_ALE) - mask |= 0x04; - writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); -} - #define FSAMPLE_NAND_RB_GPIO_PIN 62 static int nand_dev_ready(struct mtd_info *mtd) @@ -202,17 +191,14 @@ static int nand_dev_ready(struct mtd_info *mtd) return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); } -static const char *part_probes[] = { "cmdlinepart", NULL }; - static struct platform_nand_data nand_data = { .chip = { .nr_chips = 1, .chip_offset = 0, .options = NAND_SAMSUNG_LP_OPTIONS, - .part_probe_types = part_probes, }, .ctrl = { - .cmd_ctrl = nand_cmd_ctl, + .cmd_ctrl = omap1_nand_cmd_ctl, .dev_ready = nand_dev_ready, }, }; @@ -273,27 +259,17 @@ static struct platform_device kp_device = { .resource = kp_resources, }; -static struct platform_device lcd_device = { - .name = "lcd_p2", - .id = -1, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, &smc91x_device, &kp_device, - &lcd_device, }; static struct omap_lcd_config fsample_lcd_config = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel fsample_config[] __initdata = { - { OMAP_TAG_LCD, &fsample_lcd_config }, -}; - static void __init omap_fsample_init(void) { /* Early, board-dependent init */ @@ -331,8 +307,7 @@ static void __init omap_fsample_init(void) fsample_init_smc91x(); - if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); @@ -352,10 +327,10 @@ static void __init omap_fsample_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - omap_board_config = fsample_config; - omap_board_config_size = ARRAY_SIZE(fsample_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); + + omapfb_set_lcd_config(&fsample_lcd_config); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ @@ -386,9 +361,9 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .atag_offset = 0x100, .map_io = omap_fsample_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, - .timer = &omap1_timer, + .init_late = omap1_init_late, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END |