diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-fsample.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-fsample.c | 250 |
1 files changed, 118 insertions, 132 deletions
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 7e70c3c08da..702d58039cc 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -10,7 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -18,22 +18,25 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> +#include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <plat/tc.h> -#include <mach/gpio.h> -#include <plat/mux.h> -#include <plat/fpga.h> -#include <plat/keypad.h> -#include <plat/common.h> -#include <plat/board.h> +#include <mach/tc.h> +#include <mach/mux.h> +#include <mach/flash.h> +#include <linux/platform_data/keypad-omap.h> + +#include <mach/hardware.h> + +#include "iomap.h" +#include "common.h" +#include "fpga.h" /* fsample is pretty close to p2-sample */ @@ -68,36 +71,35 @@ #define fsample_cpld_clear(bit) \ fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR) -static int fsample_keymap[] = { - KEY(0,0,KEY_UP), - KEY(0,1,KEY_RIGHT), - KEY(0,2,KEY_LEFT), - KEY(0,3,KEY_DOWN), - KEY(0,4,KEY_ENTER), - KEY(1,0,KEY_F10), - KEY(1,1,KEY_SEND), - KEY(1,2,KEY_END), - KEY(1,3,KEY_VOLUMEDOWN), - KEY(1,4,KEY_VOLUMEUP), - KEY(1,5,KEY_RECORD), - KEY(2,0,KEY_F9), - KEY(2,1,KEY_3), - KEY(2,2,KEY_6), - KEY(2,3,KEY_9), - KEY(2,4,KEY_KPDOT), - KEY(3,0,KEY_BACK), - KEY(3,1,KEY_2), - KEY(3,2,KEY_5), - KEY(3,3,KEY_8), - KEY(3,4,KEY_0), - KEY(3,5,KEY_KPSLASH), - KEY(4,0,KEY_HOME), - KEY(4,1,KEY_1), - KEY(4,2,KEY_4), - KEY(4,3,KEY_7), - KEY(4,4,KEY_KPASTERISK), - KEY(4,5,KEY_POWER), - 0 +static const unsigned int fsample_keymap[] = { + KEY(0, 0, KEY_UP), + KEY(1, 0, KEY_RIGHT), + KEY(2, 0, KEY_LEFT), + KEY(3, 0, KEY_DOWN), + KEY(4, 0, KEY_ENTER), + KEY(0, 1, KEY_F10), + KEY(1, 1, KEY_SEND), + KEY(2, 1, KEY_END), + KEY(3, 1, KEY_VOLUMEDOWN), + KEY(4, 1, KEY_VOLUMEUP), + KEY(5, 1, KEY_RECORD), + KEY(0, 2, KEY_F9), + KEY(1, 2, KEY_3), + KEY(2, 2, KEY_6), + KEY(3, 2, KEY_9), + KEY(4, 2, KEY_KPDOT), + KEY(0, 3, KEY_BACK), + KEY(1, 3, KEY_2), + KEY(2, 3, KEY_5), + KEY(3, 3, KEY_8), + KEY(4, 3, KEY_0), + KEY(5, 3, KEY_KPSLASH), + KEY(0, 4, KEY_HOME), + KEY(1, 4, KEY_1), + KEY(2, 4, KEY_4), + KEY(3, 4, KEY_7), + KEY(4, 4, KEY_KPASTERISK), + KEY(5, 4, KEY_POWER), }; static struct smc91x_platdata smc91x_info = { @@ -119,6 +121,15 @@ static struct resource smc91x_resources[] = { }, }; +static void __init fsample_init_smc91x(void) +{ + __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); + __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, + H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); +} + static struct mtd_partition nor_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -150,9 +161,9 @@ static struct mtd_partition nor_partitions[] = { }, }; -static struct flash_platform_data nor_data = { - .map_name = "cfi_probe", +static struct physmap_flash_data nor_data = { .width = 2, + .set_vpp = omap1_set_vpp, .parts = nor_partitions, .nr_parts = ARRAY_SIZE(nor_partitions), }; @@ -164,7 +175,7 @@ static struct resource nor_resource = { }; static struct platform_device nor_device = { - .name = "omapflash", + .name = "physmap-flash", .id = 0, .dev = { .platform_data = &nor_data, @@ -173,20 +184,6 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long mask; - - if (cmd == NAND_CMD_NONE) - return; - - mask = (ctrl & NAND_CLE) ? 0x02 : 0; - if (ctrl & NAND_ALE) - mask |= 0x04; - writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); -} - #define FSAMPLE_NAND_RB_GPIO_PIN 62 static int nand_dev_ready(struct mtd_info *mtd) @@ -194,17 +191,14 @@ static int nand_dev_ready(struct mtd_info *mtd) return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); } -static const char *part_probes[] = { "cmdlinepart", NULL }; - static struct platform_nand_data nand_data = { .chip = { .nr_chips = 1, .chip_offset = 0, .options = NAND_SAMSUNG_LP_OPTIONS, - .part_probe_types = part_probes, }, .ctrl = { - .cmd_ctrl = nand_cmd_ctl, + .cmd_ctrl = omap1_nand_cmd_ctl, .dev_ready = nand_dev_ready, }, }; @@ -243,11 +237,15 @@ static struct resource kp_resources[] = { }, }; +static const struct matrix_keymap_data fsample_keymap_data = { + .keymap = fsample_keymap, + .keymap_size = ARRAY_SIZE(fsample_keymap), +}; + static struct omap_kp_platform_data kp_data = { .rows = 8, .cols = 8, - .keymap = fsample_keymap, - .keymapsize = ARRAY_SIZE(fsample_keymap), + .keymap_data = &fsample_keymap_data, .delay = 4, }; @@ -261,59 +259,78 @@ static struct platform_device kp_device = { .resource = kp_resources, }; -static struct platform_device lcd_device = { - .name = "lcd_p2", - .id = -1, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, &smc91x_device, &kp_device, - &lcd_device, }; -static struct omap_lcd_config fsample_lcd_config __initdata = { +static struct omap_lcd_config fsample_lcd_config = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel fsample_config[] = { - { OMAP_TAG_LCD, &fsample_lcd_config }, -}; - static void __init omap_fsample_init(void) { - if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + /* Early, board-dependent init */ + + /* + * Hold GSM Reset until needed + */ + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); + + /* + * UARTs -> done automagically by 8250 driver + */ + + /* + * CSx timings, GPIO Mux ... setup + */ + + /* Flash: CS0 timings setup */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); + + /* + * Ethernet support through the debug board + * CS1 timings setup + */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); + + /* + * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, + * It is used as the Ethernet controller interrupt + */ + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, + OMAP7XX_IO_CONF_9); + + fsample_init_smc91x(); + + BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); + /* Mux pins for keypad */ + omap_cfg_reg(E2_7XX_KBR0); + omap_cfg_reg(J7_7XX_KBR1); + omap_cfg_reg(E1_7XX_KBR2); + omap_cfg_reg(F3_7XX_KBR3); + omap_cfg_reg(D2_7XX_KBR4); + omap_cfg_reg(C2_7XX_KBC0); + omap_cfg_reg(D3_7XX_KBC1); + omap_cfg_reg(E4_7XX_KBC2); + omap_cfg_reg(F4_7XX_KBC3); + omap_cfg_reg(E3_7XX_KBC4); + platform_add_devices(devices, ARRAY_SIZE(devices)); - omap_board_config = fsample_config; - omap_board_config_size = ARRAY_SIZE(fsample_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); -} - -static void __init fsample_init_smc91x(void) -{ - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, - H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); -} -static void __init omap_fsample_init_irq(void) -{ - omap1_init_common_hw(); - omap_init_irq(); - omap_gpio_init(); - fsample_init_smc91x(); + omapfb_set_lcd_config(&fsample_lcd_config); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ @@ -334,50 +351,19 @@ static struct map_desc omap_fsample_io_desc[] __initdata = { static void __init omap_fsample_map_io(void) { - omap1_map_common_io(); + omap15xx_map_io(); iotable_init(omap_fsample_io_desc, ARRAY_SIZE(omap_fsample_io_desc)); - - /* Early, board-dependent init */ - - /* - * Hold GSM Reset until needed - */ - omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); - - /* - * UARTs -> done automagically by 8250 driver - */ - - /* - * CSx timings, GPIO Mux ... setup - */ - - /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); - omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); - - /* - * Ethernet support through the debug board - * CS1 timings setup - */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); - omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); - - /* - * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, - * It is used as the Ethernet controller interrupt - */ - omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") /* Maintainer: Brian Swetland <swetland@google.com> */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, - .boot_params = 0x10000100, + .atag_offset = 0x100, .map_io = omap_fsample_map_io, - .init_irq = omap_fsample_init_irq, + .init_early = omap1_init_early, + .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, - .timer = &omap_timer, + .init_late = omap1_init_late, + .init_time = omap1_timer_init, + .restart = omap1_restart, MACHINE_END |