diff options
Diffstat (limited to 'arch/arm/mach-mmp')
35 files changed, 273 insertions, 700 deletions
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 178d4daa5e1..ebdba87b967 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -89,6 +89,8 @@ config MACH_MMP_DT select CPU_PXA168 select CPU_PXA910 select USE_OF + select PINCTRL + select PINCTRL_SINGLE help Include support for Marvell MMP2 based platforms using the device tree. Needn't select any other machine while @@ -99,6 +101,8 @@ config MACH_MMP2_DT depends on !CPU_MOHAWK select CPU_MMP2 select USE_OF + select PINCTRL + select PINCTRL_SINGLE help Include support for Marvell MMP2 based platforms using the device tree. @@ -132,4 +136,7 @@ config USB_EHCI_MV_U2O help Enables support for OTG controller which can be switched to host mode. +config MMP_SRAM + bool + endif diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index 095c155d6fb..98f0f6388e4 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -2,12 +2,13 @@ # Makefile for Marvell's PXA168 processors line # -obj-y += common.o devices.o time.o irq.o +obj-y += common.o devices.o time.o # SoC support obj-$(CONFIG_CPU_PXA168) += pxa168.o obj-$(CONFIG_CPU_PXA910) += pxa910.o -obj-$(CONFIG_CPU_MMP2) += mmp2.o sram.o +obj-$(CONFIG_CPU_MMP2) += mmp2.o +obj-$(CONFIG_MMP_SRAM) += sram.o ifeq ($(CONFIG_COMMON_CLK), ) obj-y += clock.o diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index e5dba9c5dc5..7e0248582ef 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -9,6 +9,7 @@ * publishhed by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> @@ -110,6 +111,10 @@ static unsigned long common_pin_config[] __initdata = { GPIO121_KP_MKIN4, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct smc91x_platdata smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; @@ -205,7 +210,7 @@ struct pxa168fb_mach_info aspenite_lcd_info = { .invert_pixclock = 0, }; -static unsigned int aspenite_matrix_key_map[] = { +static const unsigned int aspenite_matrix_key_map[] = { KEY(0, 6, KEY_UP), /* SW 4 */ KEY(0, 7, KEY_DOWN), /* SW 5 */ KEY(1, 6, KEY_LEFT), /* SW 6 */ @@ -214,22 +219,20 @@ static unsigned int aspenite_matrix_key_map[] = { KEY(4, 7, KEY_ESC), /* SW 9 */ }; +static struct matrix_keymap_data aspenite_matrix_keymap_data = { + .keymap = aspenite_matrix_key_map, + .keymap_size = ARRAY_SIZE(aspenite_matrix_key_map), +}; + static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = { .matrix_key_rows = 5, .matrix_key_cols = 8, - .matrix_key_map = aspenite_matrix_key_map, - .matrix_key_map_size = ARRAY_SIZE(aspenite_matrix_key_map), + .matrix_keymap_data = &aspenite_matrix_keymap_data, .debounce_interval = 30, }; -#if defined(CONFIG_USB_EHCI_MV) -static char *pxa168_sph_clock_name[] = { - [0] = "PXA168-USBCLK", -}; - +#if IS_ENABLED(CONFIG_USB_EHCI_MV) static struct mv_usb_platform_data pxa168_sph_pdata = { - .clknum = 1, - .clkname = pxa168_sph_clock_name, .mode = MV_USB_MODE_HOST, .phy_init = pxa_usb_phy_init, .phy_deinit = pxa_usb_phy_deinit, @@ -248,12 +251,14 @@ static void __init common_init(void) pxa168_add_nand(&aspenite_nand_info); pxa168_add_fb(&aspenite_lcd_info); pxa168_add_keypad(&aspenite_keypad_info); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); /* off-chip devices */ platform_device_register(&smc91x_device); -#if defined(CONFIG_USB_EHCI_MV) +#if IS_ENABLED(CONFIG_USB_EHCI_MV) pxa168_add_usb_host(&pxa168_sph_pdata); #endif } @@ -262,7 +267,7 @@ MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform") .map_io = mmp_map_io, .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, - .timer = &pxa168_timer, + .init_time = pxa168_timer_init, .init_machine = common_init, .restart = pxa168_restart, MACHINE_END @@ -271,7 +276,7 @@ MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform") .map_io = mmp_map_io, .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, - .timer = &pxa168_timer, + .init_time = pxa168_timer_init, .init_machine = common_init, .restart = pxa168_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index 603542ae6fb..a451a0f4d51 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/gpio-pxa.h> #include <linux/platform_device.h> #include <asm/mach-types.h> @@ -32,12 +33,18 @@ static unsigned long avengers_lite_pin_config_V16F[] __initdata = { GPIO89_UART2_RXD, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static void __init avengers_lite_init(void) { mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F)); /* on-chip devices */ pxa168_add_uart(2); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); } @@ -45,7 +52,7 @@ MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform") .map_io = mmp_map_io, .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, - .timer = &pxa168_timer, + .init_time = pxa168_timer_init, .init_machine = avengers_lite_init, .restart = pxa168_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index 5cb769cd26d..ac25544b8cd 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio-pxa.h> #include <linux/regulator/machine.h> #include <linux/regulator/max8649.h> #include <linux/regulator/fixed.h> @@ -104,6 +105,10 @@ static unsigned long brownstone_pin_config[] __initdata = { GPIO89_GPIO, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct regulator_consumer_supply max8649_supply[] = { REGULATOR_SUPPLY("vcc_core", NULL), }; @@ -202,6 +207,8 @@ static void __init brownstone_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(3); + platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&mmp2_device_gpio); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info)); mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ @@ -218,7 +225,7 @@ MACHINE_START(BROWNSTONE, "Brownstone Development Platform") .map_io = mmp_map_io, .nr_irqs = BROWNSTONE_NR_IRQS, .init_irq = mmp2_init_irq, - .timer = &mmp2_timer, + .init_time = mmp2_timer_init, .init_machine = brownstone_init, .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/clock-mmp2.c b/arch/arm/mach-mmp/clock-mmp2.c index 21d22002cd1..53d77cbd600 100644 --- a/arch/arm/mach-mmp/clock-mmp2.c +++ b/arch/arm/mach-mmp/clock-mmp2.c @@ -98,7 +98,7 @@ static struct clk_lookup mmp2_clkregs[] = { INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_gpio, "mmp2-gpio", NULL), INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"), INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"), INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"), diff --git a/arch/arm/mach-mmp/clock-pxa168.c b/arch/arm/mach-mmp/clock-pxa168.c index 5e6c18ccebd..c572f219ae2 100644 --- a/arch/arm/mach-mmp/clock-pxa168.c +++ b/arch/arm/mach-mmp/clock-pxa168.c @@ -78,7 +78,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL), INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"), diff --git a/arch/arm/mach-mmp/clock-pxa910.c b/arch/arm/mach-mmp/clock-pxa910.c index 933ea71d0b5..379e1df61c7 100644 --- a/arch/arm/mach-mmp/clock-pxa910.c +++ b/arch/arm/mach-mmp/clock-pxa910.c @@ -56,7 +56,7 @@ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL), INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL), INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"), INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), }; diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index 9292b7966e3..c03b4ab582d 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -47,7 +47,7 @@ void __init mmp_map_io(void) mmp_chip_id = __raw_readl(MMP_CHIPID); } -void mmp_restart(char mode, const char *cmd) +void mmp_restart(enum reboot_mode mode, const char *cmd) { soft_restart(0); } diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h index bd453274fca..cf445bae6d7 100644 --- a/arch/arm/mach-mmp/common.h +++ b/arch/arm/mach-mmp/common.h @@ -1,12 +1,10 @@ +#include <linux/reboot.h> #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) -struct sys_timer; - extern void timer_init(int irq); -extern void __init icu_init_irq(void); extern void __init mmp_map_io(void); -extern void mmp_restart(char, const char *); +extern void mmp_restart(enum reboot_mode, const char *); extern void __init pxa168_clk_init(void); extern void __init pxa910_clk_init(void); extern void __init mmp2_clk_init(void); diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index dd2d8b103cc..2bcb766af05 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -72,7 +72,7 @@ int __init pxa_register_device(struct pxa_device_desc *desc, return platform_device_add(pdev); } -#if defined(CONFIG_USB) || defined(CONFIG_USB_GADGET) +#if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET) /***************************************************************************** * The registers read/write routines @@ -112,9 +112,9 @@ static void u2o_write(void __iomem *base, unsigned int offset, readl_relaxed(base + offset); } -#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV) +#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV) -#if defined(CONFIG_CPU_PXA910) || defined(CONFIG_CPU_PXA168) +#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168) static DEFINE_MUTEX(phy_lock); static int phy_init_cnt; @@ -238,10 +238,10 @@ void pxa_usb_phy_deinit(void __iomem *phy_reg) #endif #endif -#ifdef CONFIG_USB_SUPPORT +#if IS_ENABLED(CONFIG_USB_SUPPORT) static u64 usb_dma_mask = ~(u32)0; -#ifdef CONFIG_USB_MV_UDC +#if IS_ENABLED(CONFIG_USB_MV_UDC) struct resource pxa168_u2o_resources[] = { /* regbase */ [0] = { @@ -276,7 +276,7 @@ struct platform_device pxa168_device_u2o = { }; #endif /* CONFIG_USB_MV_UDC */ -#ifdef CONFIG_USB_EHCI_MV_U2O +#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O) struct resource pxa168_u2oehci_resources[] = { /* regbase */ [0] = { @@ -312,7 +312,7 @@ struct platform_device pxa168_device_u2oehci = { }; #endif -#if defined(CONFIG_USB_MV_OTG) +#if IS_ENABLED(CONFIG_USB_MV_OTG) struct resource pxa168_u2ootg_resources[] = { /* regbase */ [0] = { diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index 8059cc0905c..6291c33d83e 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -16,6 +16,7 @@ #include <linux/smc91x.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/interrupt.h> #include <asm/mach-types.h> @@ -77,6 +78,10 @@ static unsigned long flint_pin_config[] __initdata = { GPIO160_ND_RDY1, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct smc91x_platdata flint_smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; @@ -111,6 +116,8 @@ static void __init flint_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(2); + platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&mmp2_device_gpio); /* off-chip devices */ @@ -121,7 +128,7 @@ MACHINE_START(FLINT, "Flint Development Platform") .map_io = mmp_map_io, .nr_irqs = FLINT_NR_IRQS, .init_irq = mmp2_init_irq, - .timer = &mmp2_timer, + .init_time = mmp2_timer_init, .init_machine = flint_init, .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 5c3d61ee729..d81b2475e67 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -9,7 +9,9 @@ */ #include <linux/init.h> +#include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -127,6 +129,10 @@ static unsigned long gplugd_pin_config[] __initdata = { GPIO116_I2S_TXD }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct i2c_board_info gplugd_i2c_board_info[] = { { .type = "isl1208", @@ -185,6 +191,8 @@ static void __init gplugd_init(void) pxa168_add_uart(3); pxa168_add_ssp(1); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); pxa168_add_eth(&gplugd_eth_platform_data); @@ -194,7 +202,7 @@ MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform") .map_io = mmp_map_io, .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, - .timer = &pxa168_timer, + .init_time = pxa168_timer_init, .init_machine = gplugd_init, .restart = pxa168_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S deleted file mode 100644 index 5c3cc29688a..00000000000 --- a/arch/arm/mach-mmp/include/mach/debug-macro.S +++ /dev/null @@ -1,30 +0,0 @@ -/* arch/arm/mach-mmp/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copied from arch/arm/mach-pxa/include/mach/debug.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#if defined(CONFIG_DEBUG_MMP_UART2) -#define MMP_UART_OFFSET 0x00017000 -#elif defined(CONFIG_DEBUG_MMP_UART3) -#define MMP_UART_OFFSET 0x00018000 -#else -#error "Select uart for DEBUG_LL" -#endif - -#include <mach/addr-map.h> - - .macro addruart, rp, rv, tmp - ldr \rp, =APB_PHYS_BASE @ physical - ldr \rv, =APB_VIRT_BASE @ virtual - orr \rp, \rp, #MMP_UART_OFFSET - orr \rv, \rv, #MMP_UART_OFFSET - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S deleted file mode 100644 index bd152e24e6d..00000000000 --- a/arch/arm/mach-mmp/include/mach/entry-macro.S +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/entry-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <asm/irq.h> -#include <mach/regs-icu.h> - - .macro get_irqnr_preamble, base, tmp - mrc p15, 0, \tmp, c0, c0, 0 @ CPUID - and \tmp, \tmp, #0xff00 - cmp \tmp, #0x5800 - ldr \base, =mmp_icu_base - ldr \base, [\base, #0] - addne \base, \base, #0x10c @ PJ1 AP INT SEL register - addeq \base, \base, #0x104 @ PJ4 IRQ SEL register - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \tmp, [\base, #0] - and \irqnr, \tmp, #0x3f - tst \tmp, #(1 << 6) - .endm diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h deleted file mode 100644 index 13219ebf512..00000000000 --- a/arch/arm/mach-mmp/include/mach/gpio.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_MACH_GPIO_H -#define __ASM_MACH_GPIO_H - -#include <asm-generic/gpio.h> - -#include <mach/cputype.h> - -#endif /* __ASM_MACH_GPIO_H */ diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index c4ca4d17194..0764f4ecec8 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -3,9 +3,7 @@ #include <linux/platform_data/pxa_sdhci.h> -struct sys_timer; - -extern struct sys_timer mmp2_timer; +extern void mmp2_timer_init(void); extern void __init mmp2_init_icu(void); extern void __init mmp2_init_irq(void); extern void mmp2_clear_pmic_int(void); diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 37632d964d5..a83ba7cb525 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -1,11 +1,12 @@ #ifndef __ASM_MACH_PXA168_H #define __ASM_MACH_PXA168_H -struct sys_timer; +#include <linux/reboot.h> -extern struct sys_timer pxa168_timer; +extern void pxa168_timer_init(void); +extern void __init icu_init_irq(void); extern void __init pxa168_init_irq(void); -extern void pxa168_restart(char, const char *); +extern void pxa168_restart(enum reboot_mode, const char *); extern void pxa168_clear_keypad_wakeup(void); #include <linux/i2c.h> diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index 3b58a3b2d7d..92253203f5b 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -1,15 +1,15 @@ #ifndef __ASM_MACH_PXA910_H #define __ASM_MACH_PXA910_H -struct sys_timer; - -extern struct sys_timer pxa910_timer; +extern void pxa910_timer_init(void); +extern void __init icu_init_irq(void); extern void __init pxa910_init_irq(void); #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> #include <mach/devices.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> +#include <video/mmp_disp.h> extern struct pxa_device_desc pxa910_device_uart1; extern struct pxa_device_desc pxa910_device_uart2; @@ -23,7 +23,9 @@ extern struct pxa_device_desc pxa910_device_nand; extern struct platform_device pxa168_device_u2o; extern struct platform_device pxa168_device_u2ootg; extern struct platform_device pxa168_device_u2oehci; - +extern struct pxa_device_desc pxa910_device_disp; +extern struct pxa_device_desc pxa910_device_fb; +extern struct pxa_device_desc pxa910_device_panel; extern struct platform_device pxa910_device_gpio; extern struct platform_device pxa910_device_rtc; diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h deleted file mode 100644 index 70c9f1d88c0..00000000000 --- a/arch/arm/mach-mmp/include/mach/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/timex.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifdef CONFIG_CPU_MMP2 -#define CLOCK_TICK_RATE 6500000 -#else -#define CLOCK_TICK_RATE 3250000 -#endif diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h index d6daeb7e4ef..8890fa8fa77 100644 --- a/arch/arm/mach-mmp/include/mach/uncompress.h +++ b/arch/arm/mach-mmp/include/mach/uncompress.h @@ -43,9 +43,3 @@ static inline void arch_decomp_setup(void) if (machine_is_avengers_lite()) UART = (unsigned long *)UART3_BASE; } - -/* - * nothing to do - */ - -#define arch_decomp_wdog() diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c deleted file mode 100644 index 3c71246cd99..00000000000 --- a/arch/arm/mach-mmp/irq.c +++ /dev/null @@ -1,463 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/irq.c - * - * Generic IRQ handling, GPIO IRQ demultiplexing, etc. - * Copyright (C) 2008 - 2012 Marvell Technology Group Ltd. - * - * Author: Bin Yang <bin.yang@marvell.com> - * Haojian Zhuang <haojian.zhuang@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/io.h> -#include <linux/ioport.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <mach/irqs.h> - -#ifdef CONFIG_CPU_MMP2 -#include <mach/pm-mmp2.h> -#endif -#ifdef CONFIG_CPU_PXA910 -#include <mach/pm-pxa910.h> -#endif - -#include "common.h" - -#define MAX_ICU_NR 16 - -struct icu_chip_data { - int nr_irqs; - unsigned int virq_base; - unsigned int cascade_irq; - void __iomem *reg_status; - void __iomem *reg_mask; - unsigned int conf_enable; - unsigned int conf_disable; - unsigned int conf_mask; - unsigned int clr_mfp_irq_base; - unsigned int clr_mfp_hwirq; - struct irq_domain *domain; -}; - -struct mmp_intc_conf { - unsigned int conf_enable; - unsigned int conf_disable; - unsigned int conf_mask; -}; - -void __iomem *mmp_icu_base; -static struct icu_chip_data icu_data[MAX_ICU_NR]; -static int max_icu_nr; - -extern void mmp2_clear_pmic_int(void); - -static void icu_mask_ack_irq(struct irq_data *d) -{ - struct irq_domain *domain = d->domain; - struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data; - int hwirq; - u32 r; - - hwirq = d->irq - data->virq_base; - if (data == &icu_data[0]) { - r = readl_relaxed(mmp_icu_base + (hwirq << 2)); - r &= ~data->conf_mask; - r |= data->conf_disable; - writel_relaxed(r, mmp_icu_base + (hwirq << 2)); - } else { -#ifdef CONFIG_CPU_MMP2 - if ((data->virq_base == data->clr_mfp_irq_base) - && (hwirq == data->clr_mfp_hwirq)) - mmp2_clear_pmic_int(); -#endif - r = readl_relaxed(data->reg_mask) | (1 << hwirq); - writel_relaxed(r, data->reg_mask); - } -} - -static void icu_mask_irq(struct irq_data *d) -{ - struct irq_domain *domain = d->domain; - struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data; - int hwirq; - u32 r; - - hwirq = d->irq - data->virq_base; - if (data == &icu_data[0]) { - r = readl_relaxed(mmp_icu_base + (hwirq << 2)); - r &= ~data->conf_mask; - r |= data->conf_disable; - writel_relaxed(r, mmp_icu_base + (hwirq << 2)); - } else { - r = readl_relaxed(data->reg_mask) | (1 << hwirq); - writel_relaxed(r, data->reg_mask); - } -} - -static void icu_unmask_irq(struct irq_data *d) -{ - struct irq_domain *domain = d->domain; - struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data; - int hwirq; - u32 r; - - hwirq = d->irq - data->virq_base; - if (data == &icu_data[0]) { - r = readl_relaxed(mmp_icu_base + (hwirq << 2)); - r &= ~data->conf_mask; - r |= data->conf_enable; - writel_relaxed(r, mmp_icu_base + (hwirq << 2)); - } else { - r = readl_relaxed(data->reg_mask) & ~(1 << hwirq); - writel_relaxed(r, data->reg_mask); - } -} - -static struct irq_chip icu_irq_chip = { - .name = "icu_irq", - .irq_mask = icu_mask_irq, - .irq_mask_ack = icu_mask_ack_irq, - .irq_unmask = icu_unmask_irq, -}; - -static void icu_mux_irq_demux(unsigned int irq, struct irq_desc *desc) -{ - struct irq_domain *domain; - struct icu_chip_data *data; - int i; - unsigned long mask, status, n; - - for (i = 1; i < max_icu_nr; i++) { - if (irq == icu_data[i].cascade_irq) { - domain = icu_data[i].domain; - data = (struct icu_chip_data *)domain->host_data; - break; - } - } - if (i >= max_icu_nr) { - pr_err("Spurious irq %d in MMP INTC\n", irq); - return; - } - - mask = readl_relaxed(data->reg_mask); - while (1) { - status = readl_relaxed(data->reg_status) & ~mask; - if (status == 0) - break; - for_each_set_bit(n, &status, BITS_PER_LONG) { - generic_handle_irq(icu_data[i].virq_base + n); - } - } -} - -static int mmp_irq_domain_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hw) -{ - irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - return 0; -} - -static int mmp_irq_domain_xlate(struct irq_domain *d, struct device_node *node, - const u32 *intspec, unsigned int intsize, - unsigned long *out_hwirq, - unsigned int *out_type) -{ - *out_hwirq = intspec[0]; - return 0; -} - -const struct irq_domain_ops mmp_irq_domain_ops = { - .map = mmp_irq_domain_map, - .xlate = mmp_irq_domain_xlate, -}; - -static struct mmp_intc_conf mmp_conf = { - .conf_enable = 0x51, - .conf_disable = 0x0, - .conf_mask = 0x7f, -}; - -static struct mmp_intc_conf mmp2_conf = { - .conf_enable = 0x20, - .conf_disable = 0x0, - .conf_mask = 0x7f, -}; - -/* MMP (ARMv5) */ -void __init icu_init_irq(void) -{ - int irq; - - max_icu_nr = 1; - mmp_icu_base = ioremap(0xd4282000, 0x1000); - icu_data[0].conf_enable = mmp_conf.conf_enable; - icu_data[0].conf_disable = mmp_conf.conf_disable; - icu_data[0].conf_mask = mmp_conf.conf_mask; - icu_data[0].nr_irqs = 64; - icu_data[0].virq_base = 0; - icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0, - &irq_domain_simple_ops, - &icu_data[0]); - for (irq = 0; irq < 64; irq++) { - icu_mask_irq(irq_get_irq_data(irq)); - irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - irq_set_default_host(icu_data[0].domain); -#ifdef CONFIG_CPU_PXA910 - icu_irq_chip.irq_set_wake = pxa910_set_wake; -#endif -} - -/* MMP2 (ARMv7) */ -void __init mmp2_init_icu(void) -{ - int irq; - - max_icu_nr = 8; - mmp_icu_base = ioremap(0xd4282000, 0x1000); - icu_data[0].conf_enable = mmp2_conf.conf_enable; - icu_data[0].conf_disable = mmp2_conf.conf_disable; - icu_data[0].conf_mask = mmp2_conf.conf_mask; - icu_data[0].nr_irqs = 64; - icu_data[0].virq_base = 0; - icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0, - &irq_domain_simple_ops, - &icu_data[0]); - icu_data[1].reg_status = mmp_icu_base + 0x150; - icu_data[1].reg_mask = mmp_icu_base + 0x168; - icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE; - icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE; - icu_data[1].nr_irqs = 2; - icu_data[1].cascade_irq = 4; - icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE; - icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs, - icu_data[1].virq_base, 0, - &irq_domain_simple_ops, - &icu_data[1]); - icu_data[2].reg_status = mmp_icu_base + 0x154; - icu_data[2].reg_mask = mmp_icu_base + 0x16c; - icu_data[2].nr_irqs = 2; - icu_data[2].cascade_irq = 5; - icu_data[2].virq_base = IRQ_MMP2_RTC_BASE; - icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs, - icu_data[2].virq_base, 0, - &irq_domain_simple_ops, - &icu_data[2]); - icu_data[3].reg_status = mmp_icu_base + 0x180; - icu_data[3].reg_mask = mmp_icu_base + 0x17c; - icu_data[3].nr_irqs = 3; - icu_data[3].cascade_irq = 9; - icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE; - icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs, - icu_data[3].virq_base, 0, - &irq_domain_simple_ops, - &icu_data[3]); - icu_data[4].reg_status = mmp_icu_base + 0x158; - icu_data[4].reg_mask = mmp_icu_base + 0x170; - icu_data[4].nr_irqs = 5; - icu_data[4].cascade_irq = 17; - icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE; - icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs, - icu_data[4].virq_base, 0, - &irq_domain_simple_ops, - &icu_data[4]); - icu_data[5].reg_status = mmp_icu_base + 0x15c; - icu_data[5].reg_mask = mmp_icu_base + 0x174; - icu_data[5].nr_irqs = 15; - icu_data[5].cascade_irq = 35; - icu_data[5].virq_base = IRQ_MMP2_MISC_BASE; - icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs, - icu_data[5].virq_base, 0, - &irq_domain_simple_ops, - &icu_data[5]); - icu_data[6].reg_status = mmp_icu_base + 0x160; - icu_data[6].reg_mask = mmp_icu_base + 0x178; - icu_data[6].nr_irqs = 2; - icu_data[6].cascade_irq = 51; - icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE; - icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs, - icu_data[6].virq_base, 0, - &irq_domain_simple_ops, - &icu_data[6]); - icu_data[7].reg_status = mmp_icu_base + 0x188; - icu_data[7].reg_mask = mmp_icu_base + 0x184; - icu_data[7].nr_irqs = 2; - icu_data[7].cascade_irq = 55; - icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE; - icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs, - icu_data[7].virq_base, 0, - &irq_domain_simple_ops, - &icu_data[7]); - for (irq = 0; irq < IRQ_MMP2_MUX_END; irq++) { - icu_mask_irq(irq_get_irq_data(irq)); - switch (irq) { - case IRQ_MMP2_PMIC_MUX: - case IRQ_MMP2_RTC_MUX: - case IRQ_MMP2_KEYPAD_MUX: - case IRQ_MMP2_TWSI_MUX: - case IRQ_MMP2_MISC_MUX: - case IRQ_MMP2_MIPI_HSI1_MUX: - case IRQ_MMP2_MIPI_HSI0_MUX: - irq_set_chip(irq, &icu_irq_chip); - irq_set_chained_handler(irq, icu_mux_irq_demux); - break; - default: - irq_set_chip_and_handler(irq, &icu_irq_chip, - handle_level_irq); - break; - } - set_irq_flags(irq, IRQF_VALID); - } - irq_set_default_host(icu_data[0].domain); -#ifdef CONFIG_CPU_MMP2 - icu_irq_chip.irq_set_wake = mmp2_set_wake; -#endif -} - -#ifdef CONFIG_OF -static const struct of_device_id intc_ids[] __initconst = { - { .compatible = "mrvl,mmp-intc", .data = &mmp_conf }, - { .compatible = "mrvl,mmp2-intc", .data = &mmp2_conf }, - {} -}; - -static const struct of_device_id mmp_mux_irq_match[] __initconst = { - { .compatible = "mrvl,mmp2-mux-intc" }, - {} -}; - -int __init mmp2_mux_init(struct device_node *parent) -{ - struct device_node *node; - const struct of_device_id *of_id; - struct resource res; - int i, irq_base, ret, irq; - u32 nr_irqs, mfp_irq; - - node = parent; - max_icu_nr = 1; - for (i = 1; i < MAX_ICU_NR; i++) { - node = of_find_matching_node(node, mmp_mux_irq_match); - if (!node) - break; - of_id = of_match_node(&mmp_mux_irq_match[0], node); - ret = of_property_read_u32(node, "mrvl,intc-nr-irqs", - &nr_irqs); - if (ret) { - pr_err("Not found mrvl,intc-nr-irqs property\n"); - ret = -EINVAL; - goto err; - } - ret = of_address_to_resource(node, 0, &res); - if (ret < 0) { - pr_err("Not found reg property\n"); - ret = -EINVAL; - goto err; - } - icu_data[i].reg_status = mmp_icu_base + res.start; - ret = of_address_to_resource(node, 1, &res); - if (ret < 0) { - pr_err("Not found reg property\n"); - ret = -EINVAL; - goto err; - } - icu_data[i].reg_mask = mmp_icu_base + res.start; - icu_data[i].cascade_irq = irq_of_parse_and_map(node, 0); - if (!icu_data[i].cascade_irq) { - ret = -EINVAL; - goto err; - } - - irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); - if (irq_base < 0) { - pr_err("Failed to allocate IRQ numbers for mux intc\n"); - ret = irq_base; - goto err; - } - if (!of_property_read_u32(node, "mrvl,clr-mfp-irq", - &mfp_irq)) { - icu_data[i].clr_mfp_irq_base = irq_base; - icu_data[i].clr_mfp_hwirq = mfp_irq; - } - irq_set_chained_handler(icu_data[i].cascade_irq, - icu_mux_irq_demux); - icu_data[i].nr_irqs = nr_irqs; - icu_data[i].virq_base = irq_base; - icu_data[i].domain = irq_domain_add_legacy(node, nr_irqs, - irq_base, 0, - &mmp_irq_domain_ops, - &icu_data[i]); - for (irq = irq_base; irq < irq_base + nr_irqs; irq++) - icu_mask_irq(irq_get_irq_data(irq)); - } - max_icu_nr = i; - return 0; -err: - of_node_put(node); - max_icu_nr = i; - return ret; -} - -void __init mmp_dt_irq_init(void) -{ - struct device_node *node; - const struct of_device_id *of_id; - struct mmp_intc_conf *conf; - int nr_irqs, irq_base, ret, irq; - - node = of_find_matching_node(NULL, intc_ids); - if (!node) { - pr_err("Failed to find interrupt controller in arch-mmp\n"); - return; - } - of_id = of_match_node(intc_ids, node); - conf = of_id->data; - - ret = of_property_read_u32(node, "mrvl,intc-nr-irqs", &nr_irqs); - if (ret) { - pr_err("Not found mrvl,intc-nr-irqs property\n"); - return; - } - - mmp_icu_base = of_iomap(node, 0); - if (!mmp_icu_base) { - pr_err("Failed to get interrupt controller register\n"); - return; - } - - irq_base = irq_alloc_descs(-1, 0, nr_irqs - NR_IRQS_LEGACY, 0); - if (irq_base < 0) { - pr_err("Failed to allocate IRQ numbers\n"); - goto err; - } else if (irq_base != NR_IRQS_LEGACY) { - pr_err("ICU's irqbase should be started from 0\n"); - goto err; - } - icu_data[0].conf_enable = conf->conf_enable; - icu_data[0].conf_disable = conf->conf_disable; - icu_data[0].conf_mask = conf->conf_mask; - icu_data[0].nr_irqs = nr_irqs; - icu_data[0].virq_base = 0; - icu_data[0].domain = irq_domain_add_legacy(node, nr_irqs, 0, 0, - &mmp_irq_domain_ops, - &icu_data[0]); - irq_set_default_host(icu_data[0].domain); - for (irq = 0; irq < nr_irqs; irq++) - icu_mask_irq(irq_get_irq_data(irq)); - mmp2_mux_init(node); - return; -err: - iounmap(mmp_icu_base); -} -#endif diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index ff73249884d..0e9e5c05b37 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/gpio-pxa.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/regulator/machine.h> @@ -99,6 +100,10 @@ static unsigned long jasper_pin_config[] __initdata = { GPIO151_MMC3_CLK, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct regulator_consumer_supply max8649_supply[] = { REGULATOR_SUPPLY("vcc_core", NULL), }; @@ -165,6 +170,9 @@ static void __init jasper_init(void) mmp2_add_uart(1); mmp2_add_uart(3); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info)); + platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); + platform_device_register(&mmp2_device_gpio); mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ regulator_has_full_constraints(); @@ -174,7 +182,7 @@ MACHINE_START(MARVELL_JASPER, "Jasper Development Platform") .map_io = mmp_map_io, .nr_irqs = JASPER_NR_IRQS, .init_irq = mmp2_init_irq, - .timer = &mmp2_timer, + .init_time = mmp2_timer_init, .init_machine = jasper_init, .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c index 033cc31b3c7..cca529ceecb 100644 --- a/arch/arm/mach-mmp/mmp-dt.c +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -9,30 +9,22 @@ * publishhed by the Free Software Foundation. */ -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/of_irq.h> +#include <linux/irqchip.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/irqs.h> #include "common.h" -extern void __init mmp_dt_irq_init(void); extern void __init mmp_dt_init_timer(void); -static struct sys_timer mmp_dt_timer = { - .init = mmp_dt_init_timer, -}; - static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL), OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL), - OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL), OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), {} }; @@ -43,7 +35,7 @@ static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL), - OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL), OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), {} }; @@ -68,16 +60,14 @@ static const char *mmp_dt_board_compat[] __initdata = { DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)") .map_io = mmp_map_io, - .init_irq = mmp_dt_irq_init, - .timer = &mmp_dt_timer, + .init_time = mmp_dt_init_timer, .init_machine = pxa168_dt_init, .dt_compat = mmp_dt_board_compat, MACHINE_END DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)") .map_io = mmp_map_io, - .init_irq = mmp_dt_irq_init, - .timer = &mmp_dt_timer, + .init_time = mmp_dt_init_timer, .init_machine = pxa910_dt_init, .dt_compat = mmp_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c index 535a5ed5977..023cb453f15 100644 --- a/arch/arm/mach-mmp/mmp2-dt.c +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -10,24 +10,15 @@ */ #include <linux/io.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/of_irq.h> +#include <linux/irqchip.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/irqs.h> -#include <mach/regs-apbc.h> #include "common.h" -extern void __init mmp_dt_irq_init(void); extern void __init mmp_dt_init_timer(void); -static struct sys_timer mmp_dt_timer = { - .init = mmp_dt_init_timer, -}; - static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL), @@ -35,7 +26,7 @@ static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL), - OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp2-gpio", NULL), OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), {} }; @@ -53,8 +44,7 @@ static const char *mmp2_dt_board_compat[] __initdata = { DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)") .map_io = mmp_map_io, - .init_irq = mmp_dt_irq_init, - .timer = &mmp_dt_timer, + .init_time = mmp_dt_init_timer, .init_machine = mmp2_dt_init, .dt_compat = mmp2_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 3a3768c7a19..a70b5530bd4 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -13,6 +13,8 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqchip/mmp.h> #include <linux/platform_device.h> #include <asm/hardware/cache-tauros2.h> @@ -26,6 +28,7 @@ #include <mach/mfp.h> #include <mach/devices.h> #include <mach/mmp2.h> +#include <mach/pm-mmp2.h> #include "common.h" @@ -94,6 +97,9 @@ void mmp2_clear_pmic_int(void) void __init mmp2_init_irq(void) { mmp2_init_icu(); +#ifdef CONFIG_PM + icu_irq_chip.irq_set_wake = mmp2_set_wake; +#endif } static int __init mmp2_init(void) @@ -114,7 +120,7 @@ postcore_initcall(mmp2_init); #define APBC_TIMERS APBC_REG(0x024) -static void __init mmp2_timer_init(void) +void __init mmp2_timer_init(void) { unsigned long clk_rst; @@ -130,10 +136,6 @@ static void __init mmp2_timer_init(void) timer_init(IRQ_MMP2_TIMER1); } -struct sys_timer mmp2_timer = { - .init = mmp2_timer_init, -}; - /* on-chip devices */ MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5); MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21); @@ -168,7 +170,7 @@ struct resource mmp2_resource_gpio[] = { }; struct platform_device mmp2_device_gpio = { - .name = "pxa-gpio", + .name = "mmp2-gpio", .id = -1, .num_resources = ARRAY_SIZE(mmp2_resource_gpio), .resource = mmp2_resource_gpio, diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c index 461a191a32d..43b1a516957 100644 --- a/arch/arm/mach-mmp/pm-mmp2.c +++ b/arch/arm/mach-mmp/pm-mmp2.c @@ -27,22 +27,8 @@ int mmp2_set_wake(struct irq_data *d, unsigned int on) { - int irq = d->irq; - struct irq_desc *desc = irq_to_desc(irq); unsigned long data = 0; - - if (unlikely(irq >= nr_irqs)) { - pr_err("IRQ nubmers are out of boundary!\n"); - return -EINVAL; - } - - if (on) { - if (desc->action) - desc->action->flags |= IRQF_NO_SUSPEND; - } else { - if (desc->action) - desc->action->flags &= ~IRQF_NO_SUSPEND; - } + int irq = d->irq; /* enable wakeup sources */ switch (irq) { diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c index 48981ca801a..04c9daf9f8d 100644 --- a/arch/arm/mach-mmp/pm-pxa910.c +++ b/arch/arm/mach-mmp/pm-pxa910.c @@ -27,22 +27,8 @@ int pxa910_set_wake(struct irq_data *data, unsigned int on) { - int irq = data->irq; - struct irq_desc *desc = irq_to_desc(data->irq); uint32_t awucrm = 0, apcr = 0; - - if (unlikely(irq >= nr_irqs)) { - pr_err("IRQ nubmers are out of boundary!\n"); - return -EINVAL; - } - - if (on) { - if (desc->action) - desc->action->flags |= IRQF_NO_SUSPEND; - } else { - if (desc->action) - desc->action->flags &= ~IRQF_NO_SUSPEND; - } + int irq = data->irq; /* setting wakeup sources */ switch (irq) { @@ -115,9 +101,11 @@ int pxa910_set_wake(struct irq_data *data, unsigned int on) if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) { awucrm = MPMU_AWUCRM_WAKEUP(2); apcr |= MPMU_APCR_SLPWP2; - } else + } else { + /* FIXME: This should return a proper error code ! */ printk(KERN_ERR "Error: no defined wake up source irq: %d\n", irq); + } } if (on) { diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index b7f074f1549..144e997624c 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -67,7 +67,7 @@ postcore_initcall(pxa168_init); #define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) #define APBC_TIMERS APBC_REG(0x34) -static void __init pxa168_timer_init(void) +void __init pxa168_timer_init(void) { /* this is early, we have to initialize the CCU registers by * ourselves instead of using clk_* API. Clock rate is defined @@ -81,10 +81,6 @@ static void __init pxa168_timer_init(void) timer_init(IRQ_PXA168_TIMER1); } -struct sys_timer pxa168_timer = { - .init = pxa168_timer_init, -}; - void pxa168_clear_keypad_wakeup(void) { uint32_t val; @@ -129,7 +125,7 @@ struct resource pxa168_resource_gpio[] = { }; struct platform_device pxa168_device_gpio = { - .name = "pxa-gpio", + .name = "mmp-gpio", .id = -1, .num_resources = ARRAY_SIZE(pxa168_resource_gpio), .resource = pxa168_resource_gpio, @@ -176,7 +172,7 @@ int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata) return platform_device_register(&pxa168_device_usb_host); } -void pxa168_restart(char mode, const char *cmd) +void pxa168_restart(enum reboot_mode mode, const char *cmd) { soft_restart(0xffff0000); } diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 8b1e16fbb7a..eb57ee19684 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -12,6 +12,8 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqchip/mmp.h> #include <linux/platform_device.h> #include <asm/hardware/cache-tauros2.h> @@ -23,6 +25,8 @@ #include <mach/dma.h> #include <mach/mfp.h> #include <mach/devices.h> +#include <mach/pm-pxa910.h> +#include <mach/pxa910.h> #include "common.h" @@ -79,6 +83,9 @@ static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata = void __init pxa910_init_irq(void) { icu_init_irq(); +#ifdef CONFIG_PM + icu_irq_chip.irq_set_wake = pxa910_set_wake; +#endif } static int __init pxa910_init(void) @@ -101,7 +108,7 @@ postcore_initcall(pxa910_init); #define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) #define APBC_TIMERS APBC_REG(0x34) -static void __init pxa910_timer_init(void) +void __init pxa910_timer_init(void) { /* reset and configure */ __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS); @@ -110,10 +117,6 @@ static void __init pxa910_timer_init(void) timer_init(IRQ_PXA910_AP1_TIMER1); } -struct sys_timer pxa910_timer = { - .init = pxa910_timer_init, -}; - /* on-chip devices */ /* NOTE: there are totally 3 UARTs on PXA910: @@ -138,6 +141,9 @@ PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10); PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10); PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10); PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99); +PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec); +PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0); +PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0); struct resource pxa910_resource_gpio[] = { { @@ -153,7 +159,7 @@ struct resource pxa910_resource_gpio[] = { }; struct platform_device pxa910_device_gpio = { - .name = "pxa-gpio", + .name = "mmp-gpio", .id = -1, .num_resources = ARRAY_SIZE(pxa910_resource_gpio), .resource = pxa910_resource_gpio, diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index a6c08ede449..bf5e64906e6 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -61,7 +61,7 @@ struct gen_pool *sram_get_gpool(char *pool_name) } EXPORT_SYMBOL(sram_get_gpool); -static int __devinit sram_probe(struct platform_device *pdev) +static int sram_probe(struct platform_device *pdev) { struct sram_platdata *pdata = pdev->dev.platform_data; struct sram_bank_info *info; @@ -125,7 +125,7 @@ out: return ret; } -static int __devexit sram_remove(struct platform_device *pdev) +static int sram_remove(struct platform_device *pdev) { struct sram_bank_info *info; diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index b28f9084dff..cdfc9bfee1a 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -8,6 +8,7 @@ * publishhed by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> @@ -60,6 +61,10 @@ static unsigned long tavorevb_pin_config[] __initdata = { DF_RDY0_DF_RDY0, }; +static struct pxa_gpio_platform_data pxa910_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct smc91x_platdata tavorevb_smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; @@ -93,6 +98,8 @@ static void __init tavorevb_init(void) /* on-chip devices */ pxa910_add_uart(1); + platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa910_device_gpio); /* off-chip devices */ @@ -103,7 +110,7 @@ MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)") .map_io = mmp_map_io, .nr_irqs = MMP_NR_IRQS, .init_irq = pxa910_init_irq, - .timer = &pxa910_timer, + .init_time = pxa910_timer_init, .init_machine = tavorevb_init, .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c index dd30ea74785..6aa53fb29d2 100644 --- a/arch/arm/mach-mmp/teton_bga.c +++ b/arch/arm/mach-mmp/teton_bga.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/input.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/i2c.h> @@ -49,6 +50,10 @@ static unsigned long teton_bga_pin_config[] __initdata = { GPIO78_GPIO, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static unsigned int teton_bga_matrix_key_map[] = { KEY(0, 6, KEY_ESC), KEY(0, 7, KEY_ENTER), @@ -56,11 +61,15 @@ static unsigned int teton_bga_matrix_key_map[] = { KEY(1, 7, KEY_RIGHT), }; +static struct matrix_keymap_data teton_bga_matrix_keymap_data = { + .keymap = teton_bga_matrix_key_map, + .keymap_size = ARRAY_SIZE(teton_bga_matrix_key_map), +}; + static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = { .matrix_key_rows = 2, .matrix_key_cols = 8, - .matrix_key_map = teton_bga_matrix_key_map, - .matrix_key_map_size = ARRAY_SIZE(teton_bga_matrix_key_map), + .matrix_keymap_data = &teton_bga_matrix_keymap_data, .debounce_interval = 30, }; @@ -79,6 +88,8 @@ static void __init teton_bga_init(void) pxa168_add_uart(1); pxa168_add_keypad(&teton_bga_keypad_info); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info)); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); } @@ -86,7 +97,7 @@ MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform") .map_io = mmp_map_io, .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, - .timer = &pxa168_timer, + .init_time = pxa168_timer_init, .init_machine = teton_bga_init, .restart = pxa168_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 936447c7097..2756351dbb3 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -28,8 +28,8 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/sched_clock.h> -#include <asm/sched_clock.h> #include <mach/addr-map.h> #include <mach/regs-timers.h> #include <mach/regs-apbc.h> @@ -39,6 +39,12 @@ #include "clock.h" +#ifdef CONFIG_CPU_MMP2 +#define MMP_CLOCK_FREQ 6500000 +#else +#define MMP_CLOCK_FREQ 3250000 +#endif + #define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE #define MAX_DELTA (0xfffffffe) @@ -61,7 +67,7 @@ static inline uint32_t timer_read(void) return __raw_readl(mmp_timer_base + TMR_CVWR(1)); } -static u32 notrace mmp_read_sched_clock(void) +static u64 notrace mmp_read_sched_clock(void) { return timer_read(); } @@ -141,7 +147,6 @@ static void timer_set_mode(enum clock_event_mode mode, static struct clock_event_device ckevt = { .name = "clockevent", .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 200, .set_next_event = timer_set_next_event, .set_mode = timer_set_mode, @@ -187,7 +192,7 @@ static void __init timer_config(void) static struct irqaction timer_irq = { .name = "timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = timer_interrupt, .dev_id = &ckevt, }; @@ -196,17 +201,15 @@ void __init timer_init(int irq) { timer_config(); - setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE); + sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ); - ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift); - ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt); - ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt); ckevt.cpumask = cpumask_of(0); setup_irq(irq, &timer_irq); - clocksource_register_hz(&cksrc, CLOCK_TICK_RATE); - clockevents_register_device(&ckevt); + clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ); + clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ, + MIN_DELTA, MAX_DELTA); } #ifdef CONFIG_OF diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index ce55fd8821c..ac4af81de3e 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -15,10 +15,13 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/onenand.h> #include <linux/interrupt.h> -#include <linux/i2c/pca953x.h> +#include <linux/platform_data/pca953x.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/mfd/88pm860x.h> #include <linux/platform_data/mv_usb.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -73,6 +76,10 @@ static unsigned long ttc_dkb_pin_config[] __initdata = { DF_RDY0_DF_RDY0, }; +static struct pxa_gpio_platform_data pxa910_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct mtd_partition ttc_dkb_onenand_partitions[] = { { .name = "bootloader", @@ -157,16 +164,10 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = { }, }; -#ifdef CONFIG_USB_SUPPORT -#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O) - -static char *pxa910_usb_clock_name[] = { - [0] = "U2OCLK", -}; +#if IS_ENABLED(CONFIG_USB_SUPPORT) +#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV_U2O) static struct mv_usb_platform_data ttc_usb_pdata = { - .clknum = 1, - .clkname = pxa910_usb_clock_name, .vbus = NULL, .mode = MV_USB_MODE_OTG, .otg_force_a_bus_req = 1, @@ -177,48 +178,138 @@ static struct mv_usb_platform_data ttc_usb_pdata = { #endif #endif -#ifdef CONFIG_MTD_NAND_PXA3xx +#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx) static struct pxa3xx_nand_platform_data dkb_nand_info = { .enable_arbiter = 1, .num_cs = 1, }; #endif +#if IS_ENABLED(CONFIG_MMP_DISP) +/* path config */ +#define CFG_IOPADMODE(iopad) (iopad) /* 0x0 ~ 0xd */ +#define SCLK_SOURCE_SELECT(x) (x << 30) /* 0x0 ~ 0x3 */ +/* link config */ +#define CFG_DUMBMODE(mode) (mode << 28) /* 0x0 ~ 0x6*/ +static struct mmp_mach_path_config dkb_disp_config[] = { + [0] = { + .name = "mmp-parallel", + .overlay_num = 2, + .output_type = PATH_OUT_PARALLEL, + .path_config = CFG_IOPADMODE(0x1) + | SCLK_SOURCE_SELECT(0x1), + .link_config = CFG_DUMBMODE(0x2), + }, +}; + +static struct mmp_mach_plat_info dkb_disp_info = { + .name = "mmp-disp", + .clk_name = "disp0", + .path_num = 1, + .paths = dkb_disp_config, +}; + +static struct mmp_buffer_driver_mach_info dkb_fb_info = { + .name = "mmp-fb", + .path_name = "mmp-parallel", + .overlay_id = 0, + .dmafetch_id = 1, + .default_pixfmt = PIXFMT_RGB565, +}; + +static void dkb_tpo_panel_power(int on) +{ + int err; + u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106); + + if (on) { + err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET"); + if (err) { + pr_err("failed to request GPIO for TPO LCD RESET\n"); + return; + } + gpio_direction_output(spi_reset, 0); + udelay(100); + gpio_set_value(spi_reset, 1); + gpio_free(spi_reset); + } else { + err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET"); + if (err) { + pr_err("failed to request LCD RESET gpio\n"); + return; + } + gpio_set_value(spi_reset, 0); + gpio_free(spi_reset); + } +} + +static struct mmp_mach_panel_info dkb_tpo_panel_info = { + .name = "tpo-hvga", + .plat_path_name = "mmp-parallel", + .plat_set_onoff = dkb_tpo_panel_power, +}; + +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "tpo-hvga", + .platform_data = &dkb_tpo_panel_info, + .bus_num = 5, + } +}; + +static void __init add_disp(void) +{ + pxa_register_device(&pxa910_device_disp, + &dkb_disp_info, sizeof(dkb_disp_info)); + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + pxa_register_device(&pxa910_device_fb, + &dkb_fb_info, sizeof(dkb_fb_info)); + pxa_register_device(&pxa910_device_panel, + &dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info)); +} +#endif + static void __init ttc_dkb_init(void) { mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config)); /* on-chip devices */ pxa910_add_uart(1); -#ifdef CONFIG_MTD_NAND_PXA3xx +#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx) pxa910_add_nand(&dkb_nand_info); #endif /* off-chip devices */ pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info)); + platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices)); -#ifdef CONFIG_USB_MV_UDC +#if IS_ENABLED(CONFIG_USB_MV_UDC) pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata; platform_device_register(&pxa168_device_u2o); #endif -#ifdef CONFIG_USB_EHCI_MV_U2O +#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O) pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata; platform_device_register(&pxa168_device_u2oehci); #endif -#ifdef CONFIG_USB_MV_OTG +#if IS_ENABLED(CONFIG_USB_MV_OTG) pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata; platform_device_register(&pxa168_device_u2ootg); #endif + +#if IS_ENABLED(CONFIG_MMP_DISP) + add_disp(); +#endif } MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform") .map_io = mmp_map_io, .nr_irqs = TTCDKB_NR_IRQS, .init_irq = pxa910_init_irq, - .timer = &pxa910_timer, + .init_time = pxa910_timer_init, .init_machine = ttc_dkb_init, .restart = mmp_restart, MACHINE_END |