1 files changed, 114 insertions, 6 deletions

diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index cfd4d66ef80..0e9e5c05b37 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -12,10 +12,15 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/gpio-pxa.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/max8649.h>
+#include <linux/mfd/max8925.h>
+#include <linux/interrupt.h>
 
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/addr-map.h>
@@ -24,6 +29,8 @@
 
 #include "common.h"
 
+#define JASPER_NR_IRQS		(MMP_NR_IRQS + 48)
+
 static unsigned long jasper_pin_config[] __initdata = {
 	/* UART1 */
 	GPIO29_UART1_RXD,
@@ -58,6 +65,101 @@ static unsigned long jasper_pin_config[] __initdata = {
 	GPIO149_ND_CLE,
 	GPIO112_ND_RDY0,
 	GPIO160_ND_RDY1,
+
+	/* PMIC */
+	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
+
+	/* MMC1 */
+	GPIO131_MMC1_DAT3,
+	GPIO132_MMC1_DAT2,
+	GPIO133_MMC1_DAT1,
+	GPIO134_MMC1_DAT0,
+	GPIO136_MMC1_CMD,
+	GPIO139_MMC1_CLK,
+	GPIO140_MMC1_CD,
+	GPIO141_MMC1_WP,
+
+	/* MMC2 */
+	GPIO37_MMC2_DAT3,
+	GPIO38_MMC2_DAT2,
+	GPIO39_MMC2_DAT1,
+	GPIO40_MMC2_DAT0,
+	GPIO41_MMC2_CMD,
+	GPIO42_MMC2_CLK,
+
+	/* MMC3 */
+	GPIO165_MMC3_DAT7,
+	GPIO162_MMC3_DAT6,
+	GPIO166_MMC3_DAT5,
+	GPIO163_MMC3_DAT4,
+	GPIO167_MMC3_DAT3,
+	GPIO164_MMC3_DAT2,
+	GPIO168_MMC3_DAT1,
+	GPIO111_MMC3_DAT0,
+	GPIO112_MMC3_CMD,
+	GPIO151_MMC3_CLK,
+};
+
+static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
+	.irq_base	= MMP_GPIO_TO_IRQ(0),
+};
+
+static struct regulator_consumer_supply max8649_supply[] = {
+	REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data max8649_init_data = {
+	.constraints	= {
+		.name		= "vcc_core range",
+		.min_uV		= 1150000,
+		.max_uV		= 1280000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8649_supply[0],
+};
+
+static struct max8649_platform_data jasper_max8649_info = {
+	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
+	.extclk		= 0,
+	.ramp_timing	= MAX8649_RAMP_32MV,
+	.regulator	= &max8649_init_data,
+};
+
+static struct max8925_backlight_pdata jasper_backlight_data = {
+	.dual_string	= 0,
+};
+
+static struct max8925_power_pdata jasper_power_data = {
+	.batt_detect		= 0,	/* can't detect battery by ID pin */
+	.topoff_threshold	= MAX8925_TOPOFF_THR_10PER,
+	.fast_charge		= MAX8925_FCHG_1000MA,
+};
+
+static struct max8925_platform_data jasper_max8925_info = {
+	.backlight		= &jasper_backlight_data,
+	.power			= &jasper_power_data,
+	.irq_base		= MMP_NR_IRQS,
+};
+
+static struct i2c_board_info jasper_twsi1_info[] = {
+	[0] = {
+		.type		= "max8649",
+		.addr		= 0x60,
+		.platform_data	= &jasper_max8649_info,
+	},
+	[1] = {
+		.type		= "max8925",
+		.addr		= 0x3c,
+		.irq		= IRQ_MMP2_PMIC,
+		.platform_data	= &jasper_max8925_info,
+	},
+};
+
+static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
+	.clk_delay_cycles = 0x1f,
 };
 
 static void __init jasper_init(void)
@@ -67,14 +169,20 @@ static void __init jasper_init(void)
 	/* on-chip devices */
 	mmp2_add_uart(1);
 	mmp2_add_uart(3);
+	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
+	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
+				 sizeof(struct pxa_gpio_platform_data));
+	platform_device_register(&mmp2_device_gpio);
+	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
-	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
+	.nr_irqs	= JASPER_NR_IRQS,
 	.init_irq       = mmp2_init_irq,
-	.timer          = &mmp2_timer,
+	.init_time	= mmp2_timer_init,
 	.init_machine   = jasper_init,
+	.restart	= mmp_restart,
 MACHINE_END