diff options
Diffstat (limited to 'arch/arm/mach-lpc32xx/phy3250.c')
| -rw-r--r-- | arch/arm/mach-lpc32xx/phy3250.c | 53 |
1 files changed, 20 insertions, 33 deletions
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index b07dcc90829..7858d5b6f6c 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -24,12 +24,9 @@ #include <linux/irq.h> #include <linux/dma-mapping.h> #include <linux/device.h> -#include <linux/spi/spi.h> -#include <linux/spi/eeprom.h> #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> -#include <linux/amba/pl022.h> #include <linux/amba/pl08x.h> #include <linux/amba/mmci.h> #include <linux/of.h> @@ -37,6 +34,9 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/clk.h> +#include <linux/mtd/lpc32xx_slc.h> +#include <linux/mtd/lpc32xx_mlc.h> +#include <linux/platform_data/gpio-lpc32xx.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -45,7 +45,6 @@ #include <mach/hardware.h> #include <mach/platform.h> #include <mach/board.h> -#include <mach/gpio-lpc32xx.h> #include "common.h" /* @@ -156,21 +155,6 @@ static struct clcd_board lpc32xx_clcd_data = { .remove = lpc32xx_clcd_remove, }; -/* - * AMBA SSP (SPI) - */ -static struct pl022_ssp_controller lpc32xx_ssp0_data = { - .bus_id = 0, - .num_chipselect = 1, - .enable_dma = 0, -}; - -static struct pl022_ssp_controller lpc32xx_ssp1_data = { - .bus_id = 1, - .num_chipselect = 1, - .enable_dma = 0, -}; - static struct pl08x_channel_data pl08x_slave_channels[] = { { .bus_id = "nand-slc", @@ -198,8 +182,8 @@ static void pl08x_put_signal(const struct pl08x_channel_data *cd, int ch) static struct pl08x_platform_data pl08x_pd = { .slave_channels = &pl08x_slave_channels[0], .num_slave_channels = ARRAY_SIZE(pl08x_slave_channels), - .get_signal = pl08x_get_signal, - .put_signal = pl08x_put_signal, + .get_xfer_signal = pl08x_get_signal, + .put_xfer_signal = pl08x_put_signal, .lli_buses = PL08X_AHB1, .mem_buses = PL08X_AHB1, }; @@ -218,18 +202,27 @@ static struct mmci_platform_data lpc32xx_mmci_data = { .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | MMC_VDD_33_34, .ios_handler = mmc_handle_ios, - .dma_filter = NULL, - /* No DMA for now since AMBA PL080 dmaengine driver only does scatter - * gather, and the MMCI driver doesn't do it this way */ +}; + +static struct lpc32xx_slc_platform_data lpc32xx_slc_data = { + .dma_filter = pl08x_filter_id, +}; + +static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = { + .dma_filter = pl08x_filter_id, }; static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", &lpc32xx_ssp0_data), - OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data), + OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL), + OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL), OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data), OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd), OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd", &lpc32xx_mmci_data), + OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash", + &lpc32xx_slc_data), + OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash", + &lpc32xx_mlc_data), { } }; @@ -253,12 +246,6 @@ static void __init lpc3250_machine_init(void) of_platform_populate(NULL, of_default_bus_match_table, lpc32xx_auxdata_lookup, NULL); - - /* Register GPIOs used on this board */ - if (gpio_request(MMC_PWR_ENABLE_GPIO, "mmc_power_en")) - pr_err("Error requesting gpio %u", MMC_PWR_ENABLE_GPIO); - else if (gpio_direction_output(MMC_PWR_ENABLE_GPIO, 1)) - pr_err("Error setting gpio %u to output", MMC_PWR_ENABLE_GPIO); } static char const *lpc32xx_dt_compat[] __initdata = { @@ -273,7 +260,7 @@ DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)") .atag_offset = 0x100, .map_io = lpc32xx_map_io, .init_irq = lpc32xx_init_irq, - .timer = &lpc32xx_timer, + .init_time = lpc32xx_timer_init, .init_machine = lpc3250_machine_init, .dt_compat = lpc32xx_dt_compat, .restart = lpc23xx_restart, |