diff options
Diffstat (limited to 'arch/arm/mach-kirkwood/openrd-setup.c')
| -rw-r--r-- | arch/arm/mach-kirkwood/openrd-setup.c | 44 |
1 files changed, 27 insertions, 17 deletions
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index cfcca4174e2..e5cf8410358 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -20,7 +20,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> -#include <plat/mvsdio.h> +#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" #include "mpp.h" @@ -55,6 +55,7 @@ static struct mv_sata_platform_data openrd_sata_data = { static struct mvsdio_platform_data openrd_mvsdio_data = { .gpio_card_detect = 29, /* MPP29 used as SD card detect */ + .gpio_write_protect = -1, }; static unsigned int openrd_mpp_config[] __initdata = { @@ -83,6 +84,11 @@ static struct i2c_board_info i2c_board_info[] __initdata = { }, }; +static struct platform_device openrd_client_audio_device = { + .name = "openrd-client-audio", + .id = -1, +}; + static int __initdata uart1; static int __init sd_uart_selection(char *str) @@ -116,14 +122,12 @@ static int __init uart1_mpp_config(void) kirkwood_mpp_conf(openrd_uart1_mpp_config); if (gpio_request(34, "SD_UART1_SEL")) { - printk(KERN_ERR "GPIO request failed for SD/UART1 selection" - ", gpio: 34\n"); + pr_err("GPIO request 34 failed for SD/UART1 selection\n"); return -EIO; } if (gpio_request(28, "RS232_RS485_SEL")) { - printk(KERN_ERR "GPIO request failed for RS232/RS485 selection" - ", gpio# 28\n"); + pr_err("GPIO request 28 failed for RS232/RS485 selection\n"); gpio_free(34); return -EIO; } @@ -154,7 +158,8 @@ static void __init openrd_init(void) kirkwood_mpp_conf(openrd_mpp_config); kirkwood_uart0_init(); - kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25); + kirkwood_nand_init(openrd_nand_parts, ARRAY_SIZE(openrd_nand_parts), + 25); kirkwood_ehci_init(); @@ -172,6 +177,7 @@ static void __init openrd_init(void) kirkwood_i2c_init(); if (machine_is_openrd_client() || machine_is_openrd_ultimate()) { + platform_device_register(&openrd_client_audio_device); i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); kirkwood_audio_init(); @@ -179,15 +185,13 @@ static void __init openrd_init(void) if (uart1 <= 0) { if (uart1 < 0) - printk(KERN_ERR "Invalid kernel parameter to select " - "UART1. Defaulting to SD. ERROR CODE: %d\n", - uart1); + pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n", + uart1); /* Select SD * Pin # 34: 0 => UART1, 1 => SD */ if (gpio_request(34, "SD_UART1_SEL")) { - printk(KERN_ERR "GPIO request failed for SD/UART1 " - "selection, gpio: 34\n"); + pr_err("GPIO request 34 failed for SD/UART1 selection\n"); } else { gpio_direction_output(34, 1); @@ -214,32 +218,38 @@ subsys_initcall(openrd_pci_init); #ifdef CONFIG_MACH_OPENRD_BASE MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = openrd_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, MACHINE_END #endif #ifdef CONFIG_MACH_OPENRD_CLIENT MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = openrd_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, MACHINE_END #endif #ifdef CONFIG_MACH_OPENRD_ULTIMATE MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = openrd_init, .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, MACHINE_END #endif |