diff options
Diffstat (limited to 'arch/arm/mach-kirkwood/netspace_v2-setup.c')
| -rw-r--r-- | arch/arm/mach-kirkwood/netspace_v2-setup.c | 325 |
1 files changed, 0 insertions, 325 deletions
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c deleted file mode 100644 index 9a064065beb..00000000000 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ /dev/null @@ -1,325 +0,0 @@ -/* - * arch/arm/mach-kirkwood/netspace_v2-setup.c - * - * LaCie Network Space v2 board setup - * - * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> - * Copyright (C) 2009 Benoît Canet <benoit.canet@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <linux/i2c.h> -#include <linux/i2c/at24.h> -#include <linux/input.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/leds.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <mach/kirkwood.h> -#include <plat/time.h> -#include "common.h" -#include "mpp.h" - -/***************************************************************************** - * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) - ****************************************************************************/ - -static struct mtd_partition netspace_v2_flash_parts[] = { - { - .name = "u-boot", - .size = MTDPART_SIZ_FULL, - .offset = 0, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, -}; - -static const struct flash_platform_data netspace_v2_flash = { - .type = "mx25l4005a", - .name = "spi_flash", - .parts = netspace_v2_flash_parts, - .nr_parts = ARRAY_SIZE(netspace_v2_flash_parts), -}; - -static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &netspace_v2_flash, - .irq = -1, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data netspace_v2_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * I2C devices - ****************************************************************************/ - -static struct at24_platform_data at24c04 = { - .byte_len = SZ_4K / 8, - .page_size = 16, -}; - -/* - * i2c addr | chip | description - * 0x50 | HT24LC04 | eeprom (512B) - */ - -static struct i2c_board_info __initdata netspace_v2_i2c_info[] = { - { - I2C_BOARD_INFO("24c04", 0x50), - .platform_data = &at24c04, - } -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data netspace_v2_sata_data = { - .n_ports = 2, -}; - -#define NETSPACE_V2_GPIO_SATA0_POWER 16 -#define NETSPACE_V2_GPIO_SATA1_POWER 17 - -static void __init netspace_v2_sata_power_init(void) -{ - int err; - - err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power"); - if (err == 0) { - err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1); - if (err) - gpio_free(NETSPACE_V2_GPIO_SATA0_POWER); - } - if (err) - pr_err("netspace_v2: failed to setup SATA0 power\n"); -} - -/***************************************************************************** - * GPIO keys - ****************************************************************************/ - -#define NETSPACE_V2_PUSH_BUTTON 32 - -static struct gpio_keys_button netspace_v2_buttons[] = { - [0] = { - .code = KEY_POWER, - .gpio = NETSPACE_V2_PUSH_BUTTON, - .desc = "Power push button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data netspace_v2_button_data = { - .buttons = netspace_v2_buttons, - .nbuttons = ARRAY_SIZE(netspace_v2_buttons), -}; - -static struct platform_device netspace_v2_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &netspace_v2_button_data, - }, -}; - -/***************************************************************************** - * GPIO LEDs - ****************************************************************************/ - -/* - * The blue front LED is wired to a CPLD and can blink in relation with the - * SATA activity. - * - * The following array detail the different LED registers and the combination - * of their possible values: - * - * cmd_led | slow_led | /SATA active | LED state - * | | | - * 1 | 0 | x | off - * - | 1 | x | on - * 0 | 0 | 1 | on - * 0 | 0 | 0 | blink (rate 300ms) - */ - -#define NETSPACE_V2_GPIO_RED_LED 12 -#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29 -#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30 - - -static struct gpio_led netspace_v2_gpio_led_pins[] = { - { - .name = "ns_v2:red:fail", - .gpio = NETSPACE_V2_GPIO_RED_LED, - }, -}; - -static struct gpio_led_platform_data netspace_v2_gpio_leds_data = { - .num_leds = ARRAY_SIZE(netspace_v2_gpio_led_pins), - .leds = netspace_v2_gpio_led_pins, -}; - -static struct platform_device netspace_v2_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &netspace_v2_gpio_leds_data, - }, -}; - -static void __init netspace_v2_gpio_leds_init(void) -{ - platform_device_register(&netspace_v2_gpio_leds); - - /* - * Configure the front blue LED to blink in relation with the SATA - * activity. - */ - if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, - "SATA blue LED slow") != 0) - return; - if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0) - goto err_free_1; - if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD, - "SATA blue LED command") != 0) - goto err_free_1; - if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0) - goto err_free_2; - - return; - -err_free_2: - gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD); -err_free_1: - gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW); - pr_err("netspace_v2: failed to configure SATA blue LED\n"); -} - -/***************************************************************************** - * Timer - ****************************************************************************/ - -static void netspace_v2_timer_init(void) -{ - kirkwood_tclk = 166666667; - orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); -} - -struct sys_timer netspace_v2_timer = { - .init = netspace_v2_timer_init, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static unsigned int netspace_v2_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, /* Red led */ - MPP14_GPIO, /* USB fuse */ - MPP16_GPIO, /* SATA 0 power */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP24_GPIO, /* USB mode select */ - MPP25_GPIO, /* Fan rotation fail */ - MPP26_GPIO, /* USB device vbus */ - MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* Blue led (slow register) */ - MPP30_GPIO, /* Blue led (command register) */ - MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ - 0 -}; - -#define NETSPACE_V2_GPIO_POWER_OFF 31 - -static void netspace_v2_power_off(void) -{ - gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1); -} - -static void __init netspace_v2_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(netspace_v2_mpp_config); - - netspace_v2_sata_power_init(); - - kirkwood_ehci_init(); - kirkwood_ge00_init(&netspace_v2_ge00_data); - kirkwood_sata_init(&netspace_v2_sata_data); - kirkwood_uart0_init(); - spi_register_board_info(netspace_v2_spi_slave_info, - ARRAY_SIZE(netspace_v2_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_i2c_init(); - i2c_register_board_info(0, netspace_v2_i2c_info, - ARRAY_SIZE(netspace_v2_i2c_info)); - - netspace_v2_gpio_leds_init(); - platform_device_register(&netspace_v2_gpio_buttons); - - if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 && - gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0) - pm_power_off = netspace_v2_power_off; - else - pr_err("netspace_v2: failed to configure power-off GPIO\n"); -} - -MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = 0x00000100, - .init_machine = netspace_v2_init, - .map_io = kirkwood_map_io, - .init_irq = kirkwood_init_irq, - .timer = &netspace_v2_timer, -MACHINE_END |