1 files changed, 0 insertions, 162 deletions
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
deleted file mode 100644
index b0d3cc49269..00000000000
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-iconnect.c
- *
- * Iomega i-connect Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct gpio_led iconnect_led_pins[] = {
-	{
-		.name		= "led_level",
-		.gpio		= 41,
-		.default_trigger = "default-on",
-	}, {
-		.name		= "power:blue",
-		.gpio		= 42,
-		.default_trigger = "timer",
-	}, {
-		.name		= "power:red",
-		.gpio		= 43,
-	}, {
-		.name		= "usb1:blue",
-		.gpio		= 44,
-	}, {
-		.name		= "usb2:blue",
-		.gpio		= 45,
-	}, {
-		.name		= "usb3:blue",
-		.gpio		= 46,
-	}, {
-		.name		= "usb4:blue",
-		.gpio		= 47,
-	}, {
-		.name		= "otb:blue",
-		.gpio		= 48,
-	},
-};
-
-static struct gpio_led_platform_data iconnect_led_data = {
-	.leds		= iconnect_led_pins,
-	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
-	.gpio_blink_set	= orion_gpio_led_blink_set,
-};
-
-static struct platform_device iconnect_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &iconnect_led_data,
-	}
-};
-
-static unsigned int iconnect_mpp_config[] __initdata = {
-	MPP12_GPIO,
-	MPP35_GPIO,
-	MPP41_GPIO,
-	MPP42_GPIO,
-	MPP43_GPIO,
-	MPP44_GPIO,
-	MPP45_GPIO,
-	MPP46_GPIO,
-	MPP47_GPIO,
-	MPP48_GPIO,
-	0
-};
-
-static struct i2c_board_info __initdata iconnect_board_info[] = {
-	{
-		I2C_BOARD_INFO("lm63", 0x4c),
-	},
-};
-
-static struct mtd_partition iconnect_nand_parts[] = {
-	{
-		.name = "flash",
-		.offset = 0,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-/* yikes... theses are the original input buttons */
-/* but I'm not convinced by the sw event choices  */
-static struct gpio_keys_button iconnect_buttons[] = {
-	{
-		.type		= EV_SW,
-		.code		= SW_LID,
-		.gpio		= 12,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	}, {
-		.type		= EV_SW,
-		.code		= SW_TABLET_MODE,
-		.gpio		= 35,
-		.desc		= "OTB Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	},
-};
-
-static struct gpio_keys_platform_data iconnect_button_data = {
-	.buttons	= iconnect_buttons,
-	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
-};
-
-static struct platform_device iconnect_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev        = {
-		.platform_data  = &iconnect_button_data,
-	},
-};
-
-void __init iconnect_init(void)
-{
-	kirkwood_mpp_conf(iconnect_mpp_config);
-	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
-	kirkwood_i2c_init();
-	i2c_register_board_info(0, iconnect_board_info,
-		ARRAY_SIZE(iconnect_board_info));
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&iconnect_ge00_data);
-
-	platform_device_register(&iconnect_button_device);
-	platform_device_register(&iconnect_leds);
-}
-
-static int __init iconnect_pci_init(void)
-{
-	if (of_machine_is_compatible("iom,iconnect"))
-		kirkwood_pcie_init(KW_PCIE0);
-	return 0;
-}
-subsys_initcall(iconnect_pci_init);