diff options
Diffstat (limited to 'arch/arm/mach-ixp4xx/ixdp425-setup.c')
| -rw-r--r-- | arch/arm/mach-ixp4xx/ixdp425-setup.c | 16 |
1 files changed, 9 insertions, 7 deletions
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 108a9d3f382..e7b8befa872 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -20,6 +20,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/delay.h> +#include <linux/gpio.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> @@ -80,10 +81,10 @@ ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) if (ctrl & NAND_CTRL_CHANGE) { if (ctrl & NAND_NCE) { - gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_LOW); + gpio_set_value(IXDP425_NAND_NCE_PIN, 0); udelay(5); } else - gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_HIGH); + gpio_set_value(IXDP425_NAND_NCE_PIN, 1); offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0; offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0; @@ -227,7 +228,8 @@ static void __init ixdp425_init(void) ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3), ixdp425_flash_nand_resource.end = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1; - gpio_line_config(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_OUT); + gpio_request(IXDP425_NAND_NCE_PIN, "NAND NCE pin"); + gpio_direction_output(IXDP425_NAND_NCE_PIN, 0); /* Configure expansion bus for NAND Flash */ *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN | @@ -252,7 +254,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) @@ -268,7 +270,7 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) @@ -283,7 +285,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) @@ -298,7 +300,7 @@ MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) |