diff options
Diffstat (limited to 'arch/arm/mach-iop32x/n2100.c')
| -rw-r--r-- | arch/arm/mach-iop32x/n2100.c | 129 |
1 files changed, 106 insertions, 23 deletions
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 2741063bf36..c1cd80ecc21 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -17,20 +17,21 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/f75375s.h> +#include <linux/leds-pca9532.h> #include <linux/delay.h> #include <linux/kernel.h> #include <linux/pci.h> #include <linux/pm.h> #include <linux/string.h> -#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/reboot.h> -#include <asm/hardware.h> -#include <asm/io.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -39,7 +40,8 @@ #include <asm/mach-types.h> #include <asm/page.h> #include <asm/pgtable.h> -#include <asm/arch/time.h> +#include <mach/time.h> +#include "gpio-iop32x.h" /* * N2100 timer tick configuration. @@ -50,11 +52,6 @@ static void __init n2100_timer_init(void) iop_init_time(198000000); } -static struct sys_timer n2100_timer = { - .init = n2100_timer_init, - .offset = iop_gettimeoffset, -}; - /* * N2100 I/O. @@ -79,7 +76,7 @@ void __init n2100_map_io(void) * N2100 PCI. */ static int __init -n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; @@ -115,11 +112,10 @@ n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) } static struct hw_pci n2100_pci __initdata = { - .swizzle = pci_std_swizzle, .nr_controllers = 1, + .ops = &iop3xx_ops, .setup = iop3xx_pci_setup, .preinit = iop3xx_pci_preinit, - .scan = iop3xx_pci_scan_bus, .map_irq = n2100_pci_map_irq, }; @@ -177,7 +173,7 @@ static struct plat_serial8250_port n2100_serial_port[] = { .mapbase = N2100_UART, .membase = (char *)N2100_UART, .irq = 0, - .flags = UPF_SKIP_TEST, + .flags = UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ, .iotype = UPIO_MEM, .regshift = 0, .uartclk = 1843200, @@ -206,6 +202,53 @@ static struct f75375s_platform_data n2100_f75375s = { .pwm_enable = { 0, 0 }, }; +static struct pca9532_platform_data n2100_leds = { + .leds = { + { .name = "n2100:red:satafail0", + .state = PCA9532_OFF, + .type = PCA9532_TYPE_LED, + }, + { .name = "n2100:red:satafail1", + .state = PCA9532_OFF, + .type = PCA9532_TYPE_LED, + }, + { .name = "n2100:blue:usb", + .state = PCA9532_OFF, + .type = PCA9532_TYPE_LED, + }, + { .type = PCA9532_TYPE_NONE }, + + { .type = PCA9532_TYPE_NONE }, + { .type = PCA9532_TYPE_NONE }, + { .type = PCA9532_TYPE_NONE }, + { .name = "n2100:red:usb", + .state = PCA9532_OFF, + .type = PCA9532_TYPE_LED, + }, + + { .type = PCA9532_TYPE_NONE }, /* power OFF gpio */ + { .type = PCA9532_TYPE_NONE }, /* reset gpio */ + { .type = PCA9532_TYPE_NONE }, + { .type = PCA9532_TYPE_NONE }, + + { .type = PCA9532_TYPE_NONE }, + { .name = "n2100:orange:system", + .state = PCA9532_OFF, + .type = PCA9532_TYPE_LED, + }, + { .name = "n2100:red:system", + .state = PCA9532_OFF, + .type = PCA9532_TYPE_LED, + }, + { .name = "N2100 beeper" , + .state = PCA9532_OFF, + .type = PCA9532_TYPE_N2100_BEEP, + }, + }, + .psc = { 0, 0 }, + .pwm = { 0, 0 }, +}; + static struct i2c_board_info __initdata n2100_i2c_devices[] = { { I2C_BOARD_INFO("rs5c372b", 0x32), @@ -214,6 +257,10 @@ static struct i2c_board_info __initdata n2100_i2c_devices[] = { I2C_BOARD_INFO("f75375", 0x2e), .platform_data = &n2100_f75375s, }, + { + I2C_BOARD_INFO("pca9532", 0x60), + .platform_data = &n2100_leds, + }, }; /* @@ -241,12 +288,26 @@ static void n2100_power_off(void) ; } +static void n2100_restart(enum reboot_mode mode, const char *cmd) +{ + int ret; + + ret = gpio_direction_output(N2100_HARDWARE_RESET, 0); + if (ret) { + pr_crit("could not drive reset GPIO low\n"); + return; + } + /* Wait for reset to happen */ + while (1) + ; +} + static struct timer_list power_button_poll_timer; static void power_button_poll(unsigned long dummy) { - if (gpio_line_get(N2100_POWER_BUTTON) == 0) { + if (gpio_get_value(N2100_POWER_BUTTON) == 0) { ctrl_alt_del(); return; } @@ -255,9 +316,37 @@ static void power_button_poll(unsigned long dummy) add_timer(&power_button_poll_timer); } +static int __init n2100_request_gpios(void) +{ + int ret; + + if (!machine_is_n2100()) + return 0; + + ret = gpio_request(N2100_HARDWARE_RESET, "reset"); + if (ret) + pr_err("could not request reset GPIO\n"); + + ret = gpio_request(N2100_POWER_BUTTON, "power"); + if (ret) + pr_err("could not request power GPIO\n"); + else { + ret = gpio_direction_input(N2100_POWER_BUTTON); + if (ret) + pr_err("could not set power GPIO as input\n"); + } + /* Set up power button poll timer */ + init_timer(&power_button_poll_timer); + power_button_poll_timer.function = power_button_poll; + power_button_poll_timer.expires = jiffies + (HZ / 10); + add_timer(&power_button_poll_timer); + return 0; +} +device_initcall(n2100_request_gpios); static void __init n2100_init_machine(void) { + register_iop32x_gpio(); platform_device_register(&iop3xx_i2c0_device); platform_device_register(&n2100_flash_device); platform_device_register(&n2100_serial_device); @@ -268,20 +357,14 @@ static void __init n2100_init_machine(void) ARRAY_SIZE(n2100_i2c_devices)); pm_power_off = n2100_power_off; - - init_timer(&power_button_poll_timer); - power_button_poll_timer.function = power_button_poll; - power_button_poll_timer.expires = jiffies + (HZ / 10); - add_timer(&power_button_poll_timer); } MACHINE_START(N2100, "Thecus N2100") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = N2100_UART, - .io_pg_offst = ((N2100_UART) >> 18) & 0xfffc, - .boot_params = 0xa0000100, + .atag_offset = 0x100, .map_io = n2100_map_io, .init_irq = iop32x_init_irq, - .timer = &n2100_timer, + .init_time = n2100_timer_init, .init_machine = n2100_init_machine, + .restart = n2100_restart, MACHINE_END |