diff options
Diffstat (limited to 'arch/arm/mach-iop13xx/pci.c')
| -rw-r--r-- | arch/arm/mach-iop13xx/pci.c | 126 |
1 files changed, 66 insertions, 60 deletions
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index d1d0d32ca77..9082b84aeeb 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -18,13 +18,16 @@ */ #include <linux/pci.h> +#include <linux/slab.h> #include <linux/delay.h> - +#include <linux/jiffies.h> +#include <linux/export.h> #include <asm/irq.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/sizes.h> +#include <asm/signal.h> #include <asm/mach/pci.h> -#include <asm/arch/pci.h> +#include <mach/pci.h> #define IOP13XX_PCI_DEBUG 0 #define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x))) @@ -33,12 +36,10 @@ u32 iop13xx_atux_pmmr_offset; /* This offset can change based on strapping */ u32 iop13xx_atue_pmmr_offset; /* This offset can change based on strapping */ static struct pci_bus *pci_bus_atux = 0; static struct pci_bus *pci_bus_atue = 0; -u32 iop13xx_atue_mem_base; -u32 iop13xx_atux_mem_base; +void __iomem *iop13xx_atue_mem_base; +void __iomem *iop13xx_atux_mem_base; size_t iop13xx_atue_mem_size; size_t iop13xx_atux_mem_size; -unsigned long iop13xx_pcibios_min_io = 0; -unsigned long iop13xx_pcibios_min_mem = 0; EXPORT_SYMBOL(iop13xx_atue_mem_base); EXPORT_SYMBOL(iop13xx_atux_mem_base); @@ -87,19 +88,18 @@ void iop13xx_map_pci_memory(void) } if (end) { - iop13xx_atux_mem_base = - (u32) __arm_ioremap_pfn( + iop13xx_atux_mem_base = __arm_ioremap_pfn( __phys_to_pfn(IOP13XX_PCIX_LOWER_MEM_PA) , 0, iop13xx_atux_mem_size, MT_DEVICE); if (!iop13xx_atux_mem_base) { printk("%s: atux allocation " - "failed\n", __FUNCTION__); + "failed\n", __func__); BUG(); } } else iop13xx_atux_mem_size = 0; - PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n", - __FUNCTION__, atu, iop13xx_atux_mem_size, + PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n", + __func__, atu, iop13xx_atux_mem_size, iop13xx_atux_mem_base); break; case 1: @@ -113,24 +113,23 @@ void iop13xx_map_pci_memory(void) } if (end) { - iop13xx_atue_mem_base = - (u32) __arm_ioremap_pfn( + iop13xx_atue_mem_base = __arm_ioremap_pfn( __phys_to_pfn(IOP13XX_PCIE_LOWER_MEM_PA) , 0, iop13xx_atue_mem_size, MT_DEVICE); if (!iop13xx_atue_mem_base) { printk("%s: atue allocation " - "failed\n", __FUNCTION__); + "failed\n", __func__); BUG(); } } else iop13xx_atue_mem_size = 0; - PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n", - __FUNCTION__, atu, iop13xx_atue_mem_size, + PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n", + __func__, atu, iop13xx_atue_mem_size, iop13xx_atue_mem_base); break; } - printk("%s: Initialized (%uM @ resource/virtual: %08lx/%08x)\n", + printk("%s: Initialized (%uM @ resource/virtual: %08lx/%p)\n", atu ? "ATUE" : "ATUX", (atu ? iop13xx_atue_mem_size : iop13xx_atux_mem_size) / SZ_1M, @@ -144,7 +143,7 @@ void iop13xx_map_pci_memory(void) } } -static inline int iop13xx_atu_function(int atu) +static int iop13xx_atu_function(int atu) { int func = 0; /* the function number depends on the value of the @@ -223,7 +222,7 @@ static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where) /* This routine checks the status of the last configuration cycle. If an error * was detected it returns >0, else it returns a 0. The errors being checked * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during + * errors occur during a config cycle where there is no device, like during * the discovery stage. */ static int iop13xx_atux_pci_status(int clear) @@ -259,7 +258,7 @@ static int iop13xx_atux_pci_status(int clear) * data. Note that the data dependency on %0 encourages an abort * to be detected before we return. */ -static inline u32 iop13xx_atux_read(unsigned long addr) +static u32 iop13xx_atux_read(unsigned long addr) { u32 val; @@ -330,7 +329,7 @@ static struct pci_ops iop13xx_atux_ops = { /* This routine checks the status of the last configuration cycle. If an error * was detected it returns >0, else it returns a 0. The errors being checked * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during + * errors occur during a config cycle where there is no device, like during * the discovery stage. */ static int iop13xx_atue_pci_status(int clear) @@ -387,8 +386,8 @@ static int iop13xx_atue_pci_status(int clear) return err; } -static inline int __init -iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +static int +iop13xx_pcie_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin) { WARN_ON(idsel != 0); @@ -401,7 +400,7 @@ iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) } } -static inline u32 iop13xx_atue_read(unsigned long addr) +static u32 iop13xx_atue_read(unsigned long addr) { u32 val; @@ -536,14 +535,14 @@ struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys) while(time_before(jiffies, atux_trhfa_timeout)) udelay(100); - bus = pci_bus_atux = pci_scan_bus(sys->busnr, - &iop13xx_atux_ops, - sys); + bus = pci_bus_atux = pci_scan_root_bus(NULL, sys->busnr, + &iop13xx_atux_ops, + sys, &sys->resources); break; case IOP13XX_INIT_ATU_ATUE: - bus = pci_bus_atue = pci_scan_bus(sys->busnr, - &iop13xx_atue_ops, - sys); + bus = pci_bus_atue = pci_scan_root_bus(NULL, sys->busnr, + &iop13xx_atue_ops, + sys, &sys->resources); break; } @@ -559,6 +558,14 @@ void __init iop13xx_atue_setup(void) int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE); u32 reg_val; +#ifdef CONFIG_PCI_MSI + /* BAR 0 (inbound msi window) */ + __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR); + __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUE_IALR0); + __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUE_IATVR0); + __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUE_IABAR0); +#endif + /* BAR 1 (1:1 mapping with Physical RAM) */ /* Set limit and enable */ __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1, @@ -720,6 +727,14 @@ void __init iop13xx_atux_setup(void) else atux_trhfa_timeout = jiffies; +#ifdef CONFIG_PCI_MSI + /* BAR 0 (inbound msi window) */ + __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR); + __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUX_IALR0); + __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUX_IATVR0); + __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUX_IABAR0); +#endif + /* BAR 1 (1:1 mapping with Physical RAM) */ /* Set limit and enable */ __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1, @@ -953,7 +968,7 @@ void __init iop13xx_pci_init(void) __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR); /* Setup the Min Address for PCI memory... */ - iop13xx_pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA; + pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA; /* if Linux is given control of an ATU * clear out its prior configuration, @@ -969,11 +984,11 @@ void __init iop13xx_pci_init(void) iop13xx_atux_setup(); } - hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, + hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, 0, "imprecise external abort"); } -/* intialize the pci memory space. handle any combination of +/* initialize the pci memory space. handle any combination of * atue and atux enabled/disabled */ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) @@ -985,11 +1000,10 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) if (nr > 1) return 0; - res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource), GFP_KERNEL); if (!res) panic("PCI: unable to alloc resources"); - memset(res, 0, sizeof(struct resource) * 2); /* 'nr' assumptions: * ATUX is always 0 @@ -1010,8 +1024,10 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) which_atu = 0; } - if (!which_atu) + if (!which_atu) { + kfree(res); return 0; + } switch(which_atu) { case IOP13XX_INIT_ATU_ATUX: @@ -1023,17 +1039,13 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) << IOP13XX_ATUX_PCIXSR_FUNC_NUM; __raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR); - res[0].start = IOP13XX_PCIX_LOWER_IO_PA + IOP13XX_PCIX_IO_BUS_OFFSET; - res[0].end = IOP13XX_PCIX_UPPER_IO_PA; - res[0].name = "IQ81340 ATUX PCI I/O Space"; - res[0].flags = IORESOURCE_IO; + pci_ioremap_io(0, IOP13XX_PCIX_LOWER_IO_PA); - res[1].start = IOP13XX_PCIX_LOWER_MEM_RA; - res[1].end = IOP13XX_PCIX_UPPER_MEM_RA; - res[1].name = "IQ81340 ATUX PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; + res->start = IOP13XX_PCIX_LOWER_MEM_RA; + res->end = IOP13XX_PCIX_UPPER_MEM_RA; + res->name = "IQ81340 ATUX PCI Memory Space"; + res->flags = IORESOURCE_MEM; sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET; - sys->io_offset = IOP13XX_PCIX_LOWER_IO_PA; break; case IOP13XX_INIT_ATU_ATUE: /* Note: the function number field in the PCSR is ro */ @@ -1044,29 +1056,23 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) __raw_writel(pcsr, IOP13XX_ATUE_PCSR); - res[0].start = IOP13XX_PCIE_LOWER_IO_PA + IOP13XX_PCIE_IO_BUS_OFFSET; - res[0].end = IOP13XX_PCIE_UPPER_IO_PA; - res[0].name = "IQ81340 ATUE PCI I/O Space"; - res[0].flags = IORESOURCE_IO; + pci_ioremap_io(SZ_64K, IOP13XX_PCIE_LOWER_IO_PA); - res[1].start = IOP13XX_PCIE_LOWER_MEM_RA; - res[1].end = IOP13XX_PCIE_UPPER_MEM_RA; - res[1].name = "IQ81340 ATUE PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; + res->start = IOP13XX_PCIE_LOWER_MEM_RA; + res->end = IOP13XX_PCIE_UPPER_MEM_RA; + res->name = "IQ81340 ATUE PCI Memory Space"; + res->flags = IORESOURCE_MEM; sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET; - sys->io_offset = IOP13XX_PCIE_LOWER_IO_PA; sys->map_irq = iop13xx_pcie_map_irq; break; default: + kfree(res); return 0; } - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); + request_resource(&iomem_resource, res); - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; + pci_add_resource_offset(&sys->resources, res, sys->mem_offset); return 1; } |
