diff options
Diffstat (limited to 'arch/arm/mach-integrator')
| -rw-r--r-- | arch/arm/mach-integrator/Kconfig | 13 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/cm.h (renamed from arch/arm/mach-integrator/include/mach/cm.h) | 7 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/core.c | 186 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/hardware.h (renamed from arch/arm/mach-integrator/include/mach/platform.h) | 110 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/impd1.c | 95 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/impd1.h (renamed from arch/arm/mach-integrator/include/mach/impd1.h) | 4 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/include/mach/hardware.h | 45 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/include/mach/irqs.h | 81 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/include/mach/timex.h | 26 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/integrator_ap.c | 263 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/integrator_cp.c | 238 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/leds.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/lm.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/lm.h (renamed from arch/arm/mach-integrator/include/mach/lm.h) | 0 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/pci_v3.c | 131 |
15 files changed, 307 insertions, 901 deletions
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index abeff25532a..64f8e2564a3 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -6,8 +6,8 @@ config ARCH_INTEGRATOR_AP bool "Support Integrator/AP and Integrator/PP2 platforms" select CLKSRC_MMIO select MIGHT_HAVE_PCI - select SERIAL_AMBA_PL010 - select SERIAL_AMBA_PL010_CONSOLE + select SERIAL_AMBA_PL010 if TTY + select SERIAL_AMBA_PL010_CONSOLE if TTY select SOC_BUS help Include support for the ARM(R) Integrator/AP and @@ -18,8 +18,8 @@ config ARCH_INTEGRATOR_CP select ARCH_CINTEGRATOR select ARM_TIMER_SP804 select PLAT_VERSATILE_CLCD - select SERIAL_AMBA_PL011 - select SERIAL_AMBA_PL011_CONSOLE + select SERIAL_AMBA_PL011 if TTY + select SERIAL_AMBA_PL011_CONSOLE if TTY select SOC_BUS help Include support for the ARM(R) Integrator CP platform. @@ -28,8 +28,11 @@ config ARCH_CINTEGRATOR bool config INTEGRATOR_IMPD1 - tristate "Include support for Integrator/IM-PD1" + bool "Include support for Integrator/IM-PD1" depends on ARCH_INTEGRATOR_AP + select ARCH_REQUIRE_GPIOLIB + select ARM_VIC + select GPIO_PL061 if GPIOLIB help The IM-PD1 is an add-on logic module for the Integrator which allows ARM(R) Ltd PrimeCells to be developed and evaluated. diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/cm.h index 202e6a57f10..4ecff7bff48 100644 --- a/arch/arm/mach-integrator/include/mach/cm.h +++ b/arch/arm/mach-integrator/cm.h @@ -1,9 +1,12 @@ /* - * update the core module control register. + * access the core module control register. */ +u32 cm_get(void); void cm_control(u32, u32); -#define CM_CTRL __io_address(INTEGRATOR_HDR_CTRL) +struct device_node; +void cm_init(void); +void cm_clear_irqs(void); #define CM_CTRL_LED (1 << 0) #define CM_CTRL_nMBDET (1 << 1) diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 4cdfd736592..e3f3aca43ef 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -22,77 +22,28 @@ #include <linux/amba/serial.h> #include <linux/io.h> #include <linux/stat.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include <mach/cm.h> -#include <mach/irqs.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/mach-types.h> #include <asm/mach/time.h> #include <asm/pgtable.h> +#include "hardware.h" +#include "cm.h" #include "common.h" -#ifdef CONFIG_ATAGS - -#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT } -#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 } -#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 } -#define KMI0_IRQ { IRQ_KMIINT0 } -#define KMI1_IRQ { IRQ_KMIINT1 } - -static AMBA_APB_DEVICE(rtc, "rtc", 0, - INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); - -static AMBA_APB_DEVICE(uart0, "uart0", 0, - INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL); - -static AMBA_APB_DEVICE(uart1, "uart1", 0, - INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL); - -static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL); -static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL); - -static struct amba_device *amba_devs[] __initdata = { - &rtc_device, - &uart0_device, - &uart1_device, - &kmi0_device, - &kmi1_device, -}; +static DEFINE_RAW_SPINLOCK(cm_lock); +static void __iomem *cm_base; -int __init integrator_init(bool is_cp) +/** + * cm_get - get the value from the CM_CTRL register + */ +u32 cm_get(void) { - int i; - - /* - * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to - * hard-code them. The Integator/CP and forward have proper cell IDs. - * Else we leave them undefined to the bus driver can autoprobe them. - */ - if (!is_cp && IS_ENABLED(CONFIG_ARCH_INTEGRATOR_AP)) { - rtc_device.periphid = 0x00041030; - uart0_device.periphid = 0x00041010; - uart1_device.periphid = 0x00041010; - kmi0_device.periphid = 0x00041050; - kmi1_device.periphid = 0x00041050; - uart0_device.dev.platform_data = &ap_uart_data; - uart1_device.dev.platform_data = &ap_uart_data; - } - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } - - return 0; + return readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET); } -#endif - -static DEFINE_RAW_SPINLOCK(cm_lock); - /** * cm_control - update the CM_CTRL register. * @mask: bits to change @@ -104,12 +55,80 @@ void cm_control(u32 mask, u32 set) u32 val; raw_spin_lock_irqsave(&cm_lock, flags); - val = readl(CM_CTRL) & ~mask; - writel(val | set, CM_CTRL); + val = readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET) & ~mask; + writel(val | set, cm_base + INTEGRATOR_HDR_CTRL_OFFSET); raw_spin_unlock_irqrestore(&cm_lock, flags); } -EXPORT_SYMBOL(cm_control); +static const char *integrator_arch_str(u32 id) +{ + switch ((id >> 16) & 0xff) { + case 0x00: + return "ASB little-endian"; + case 0x01: + return "AHB little-endian"; + case 0x03: + return "AHB-Lite system bus, bi-endian"; + case 0x04: + return "AHB"; + case 0x08: + return "AHB system bus, ASB processor bus"; + default: + return "Unknown"; + } +} + +static const char *integrator_fpga_str(u32 id) +{ + switch ((id >> 12) & 0xf) { + case 0x01: + return "XC4062"; + case 0x02: + return "XC4085"; + case 0x03: + return "XVC600"; + case 0x04: + return "EPM7256AE (Altera PLD)"; + default: + return "Unknown"; + } +} + +void cm_clear_irqs(void) +{ + /* disable core module IRQs */ + writel(0xffffffffU, cm_base + INTEGRATOR_HDR_IC_OFFSET + + IRQ_ENABLE_CLEAR); +} + +static const struct of_device_id cm_match[] = { + { .compatible = "arm,core-module-integrator"}, + { }, +}; + +void cm_init(void) +{ + struct device_node *cm = of_find_matching_node(NULL, cm_match); + u32 val; + + if (!cm) { + pr_crit("no core module node found in device tree\n"); + return; + } + cm_base = of_iomap(cm, 0); + if (!cm_base) { + pr_crit("could not remap core module\n"); + return; + } + cm_clear_irqs(); + val = readl(cm_base + INTEGRATOR_HDR_ID_OFFSET); + pr_info("Detected ARM core module:\n"); + pr_info(" Manufacturer: %02x\n", (val >> 24)); + pr_info(" Architecture: %s\n", integrator_arch_str(val)); + pr_info(" FPGA: %s\n", integrator_fpga_str(val)); + pr_info(" Build: %02x\n", (val >> 4) & 0xFF); + pr_info(" Rev: %c\n", ('A' + (val & 0x03))); +} /* * We need to stop things allocating the low memory; ideally we need a @@ -145,27 +164,7 @@ static ssize_t intcp_get_arch(struct device *dev, struct device_attribute *attr, char *buf) { - const char *arch; - - switch ((integrator_id >> 16) & 0xff) { - case 0x00: - arch = "ASB little-endian"; - break; - case 0x01: - arch = "AHB little-endian"; - break; - case 0x03: - arch = "AHB-Lite system bus, bi-endian"; - break; - case 0x04: - arch = "AHB"; - break; - default: - arch = "Unknown"; - break; - } - - return sprintf(buf, "%s\n", arch); + return sprintf(buf, "%s\n", integrator_arch_str(integrator_id)); } static struct device_attribute intcp_arch_attr = @@ -175,24 +174,7 @@ static ssize_t intcp_get_fpga(struct device *dev, struct device_attribute *attr, char *buf) { - const char *fpga; - - switch ((integrator_id >> 12) & 0xf) { - case 0x01: - fpga = "XC4062"; - break; - case 0x02: - fpga = "XC4085"; - break; - case 0x04: - fpga = "EPM7256AE (Altera PLD)"; - break; - default: - fpga = "Unknown"; - break; - } - - return sprintf(buf, "%s\n", fpga); + return sprintf(buf, "%s\n", integrator_fpga_str(integrator_id)); } static struct device_attribute intcp_fpga_attr = diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/hardware.h index 306d025d973..857ca5f8b9a 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/hardware.h @@ -1,4 +1,8 @@ /* + * This file contains the hardware definitions of the Integrator. + * + * Copyright (C) 1998-1999 ARM Limited. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -13,26 +17,28 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/************************************************************************** - * * Copyright © ARM Limited 1998. All rights reserved. - * ***********************************************************************/ -/* ************************************************************************ - * - * Integrator address map - * - * ***********************************************************************/ +#ifndef INTEGRATOR_HARDWARE_H +#define INTEGRATOR_HARDWARE_H -#ifndef __address_h -#define __address_h 1 +/* + * Where in virtual memory the IO devices (timers, system controllers + * and so on) + */ +#define IO_BASE 0xF0000000 // VA of IO +#define IO_SIZE 0x0B000000 // How much? +#define IO_START INTEGRATOR_HDR_BASE // PA of IO + +/* macro to get at IO space when running virtually */ +#ifdef CONFIG_MMU +#define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE) +#else +#define IO_ADDRESS(x) (x) +#endif -/* ======================================================================== - * Integrator definitions - * ======================================================================== - * ------------------------------------------------------------------------ - * Memory definitions - * ------------------------------------------------------------------------ +#define __io_address(n) ((void __iomem *)IO_ADDRESS(n)) + +/* * Integrator memory map - * */ #define INTEGRATOR_BOOT_ROM_LO 0x00000000 #define INTEGRATOR_BOOT_ROM_HI 0x20000000 @@ -40,13 +46,13 @@ #define INTEGRATOR_BOOT_ROM_SIZE SZ_512K /* - * New Core Modules have different amounts of SSRAM, the amount of SSRAM - * fitted can be found in HDR_STAT. + * New Core Modules have different amounts of SSRAM, the amount of SSRAM + * fitted can be found in HDR_STAT. * - * The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to - * the minimum amount of SSRAM fitted on any core module. + * The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to + * the minimum amount of SSRAM fitted on any core module. * - * New Core Modules also alias the SSRAM. + * New Core Modules also alias the SSRAM. * */ #define INTEGRATOR_SSRAM_BASE 0x00000000 @@ -61,7 +67,6 @@ /* * SDRAM is a SIMM therefore the size is not known. - * */ #define INTEGRATOR_SDRAM_BASE 0x00040000 @@ -81,10 +86,8 @@ #define INTEGRATOR_LOGIC_MODULE2_BASE 0xE0000000 #define INTEGRATOR_LOGIC_MODULE3_BASE 0xF0000000 -/* ------------------------------------------------------------------------ - * Integrator header card registers - * ------------------------------------------------------------------------ - * +/* + * Integrator header card registers */ #define INTEGRATOR_HDR_ID_OFFSET 0x00 #define INTEGRATOR_HDR_PROC_OFFSET 0x04 @@ -173,16 +176,12 @@ #define INTEGRATOR_HDR_SDRAM_SPD_OK (1 << 5) - -/* ------------------------------------------------------------------------ - * Integrator system registers - * ------------------------------------------------------------------------ - * +/* + * Integrator system registers */ /* * System Controller - * */ #define INTEGRATOR_SC_ID_OFFSET 0x00 #define INTEGRATOR_SC_OSC_OFFSET 0x04 @@ -223,7 +222,6 @@ /* * External Bus Interface - * */ #define INTEGRATOR_EBI_BASE 0x12000000 @@ -272,7 +270,6 @@ /* * LED's & Switches - * */ #define INTEGRATOR_DBG_ALPHA_OFFSET 0x00 #define INTEGRATOR_DBG_LEDS_OFFSET 0x04 @@ -292,32 +289,25 @@ #define INTEGRATOR_CP_SIC_BASE 0xCA000000 /* SIC */ #define INTEGRATOR_CP_CTL_BASE 0xCB000000 /* CP system control */ -/* ------------------------------------------------------------------------ - * KMI keyboard/mouse definitions - * ------------------------------------------------------------------------ - */ /* PS2 Keyboard interface */ #define KMI0_BASE INTEGRATOR_KBD_BASE /* PS2 Mouse interface */ #define KMI1_BASE INTEGRATOR_MOUSE_BASE -/* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */ - -/* ------------------------------------------------------------------------ - * Integrator Interrupt Controllers - * ------------------------------------------------------------------------ +/* + * Integrator Interrupt Controllers * - * Offsets from interrupt controller base * - * System Controller interrupt controller base is + * Offsets from interrupt controller base + * + * System Controller interrupt controller base is * * INTEGRATOR_IC_BASE + (header_number << 6) * - * Core Module interrupt controller base is + * Core Module interrupt controller base is * * INTEGRATOR_HDR_IC - * */ #define IRQ_STATUS 0 #define IRQ_RAW_STATUS 0x04 @@ -335,25 +325,8 @@ #define FIQ_ENABLE_CLEAR 0x2C -/* ------------------------------------------------------------------------ - * Interrupts - * ------------------------------------------------------------------------ - * - * - * Each Core Module has two interrupts controllers, one on the core module - * itself and one in the system controller on the motherboard. The - * READ_INT macro in target.s reads both interrupt controllers and returns - * a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller - * and bits 24 to 31 are from the core module. - * - * The following definitions relate to the bitmask returned by READ_INT. - * - */ - -/* ------------------------------------------------------------------------ - * LED's - * ------------------------------------------------------------------------ - * +/* + * LED's */ #define GREEN_LED 0x01 #define YELLOW_LED 0x02 @@ -371,7 +344,6 @@ * * Timer 0 runs at bus frequency */ - #define INTEGRATOR_TIMER0_BASE INTEGRATOR_CT_BASE #define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100) #define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200) @@ -379,4 +351,4 @@ #define INTEGRATOR_CSR_BASE 0x10000000 #define INTEGRATOR_CSR_SIZE 0x10000000 -#endif +#endif /* INTEGRATOR_HARDWARE_H */ diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 9f82f9dcbb9..3ce880729cf 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -23,10 +23,11 @@ #include <linux/io.h> #include <linux/platform_data/clk-integrator.h> #include <linux/slab.h> +#include <linux/irqchip/arm-vic.h> -#include <mach/lm.h> -#include <mach/impd1.h> #include <asm/sizes.h> +#include "lm.h" +#include "impd1.h" static int module_id; @@ -35,6 +36,7 @@ MODULE_PARM_DESC(lmid, "logic module stack position"); struct impd1_module { void __iomem *base; + void __iomem *vic_base; }; void impd1_tweak_control(struct device *dev, u32 mask, u32 val) @@ -262,9 +264,6 @@ struct impd1_device { static struct impd1_device impd1_devs[] = { { - .offset = 0x03000000, - .id = 0x00041190, - }, { .offset = 0x00100000, .irq = { 1 }, .id = 0x00141011, @@ -304,46 +303,77 @@ static struct impd1_device impd1_devs[] = { } }; -static int impd1_probe(struct lm_device *dev) +/* + * Valid IRQs: 0 thru 9 and 11, 10 unused. + */ +#define IMPD1_VALID_IRQS 0x00000bffU + +/* + * As this module is bool, it is OK to have this as __init_refok() - no + * probe calls will be done after the initial system bootup, as devices + * are discovered as part of the machine startup. + */ +static int __init_refok impd1_probe(struct lm_device *dev) { struct impd1_module *impd1; - int i, ret; + int irq_base; + int i; if (dev->id != module_id) return -EINVAL; - if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers")) + if (!devm_request_mem_region(&dev->dev, dev->resource.start, + SZ_4K, "LM registers")) return -EBUSY; - impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL); - if (!impd1) { - ret = -ENOMEM; - goto release_lm; - } + impd1 = devm_kzalloc(&dev->dev, sizeof(struct impd1_module), + GFP_KERNEL); + if (!impd1) + return -ENOMEM; - impd1->base = ioremap(dev->resource.start, SZ_4K); - if (!impd1->base) { - ret = -ENOMEM; - goto free_impd1; - } + impd1->base = devm_ioremap(&dev->dev, dev->resource.start, SZ_4K); + if (!impd1->base) + return -ENOMEM; - lm_set_drvdata(dev, impd1); + integrator_impd1_clk_init(impd1->base, dev->id); - printk("IM-PD1 found at 0x%08lx\n", - (unsigned long)dev->resource.start); + if (!devm_request_mem_region(&dev->dev, + dev->resource.start + 0x03000000, + SZ_4K, "VIC")) + return -EBUSY; - integrator_impd1_clk_init(impd1->base, dev->id); + impd1->vic_base = devm_ioremap(&dev->dev, + dev->resource.start + 0x03000000, + SZ_4K); + if (!impd1->vic_base) + return -ENOMEM; + + irq_base = vic_init_cascaded(impd1->vic_base, dev->irq, + IMPD1_VALID_IRQS, 0); + + lm_set_drvdata(dev, impd1); + + dev_info(&dev->dev, "IM-PD1 found at 0x%08lx\n", + (unsigned long)dev->resource.start); for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) { struct impd1_device *idev = impd1_devs + i; struct amba_device *d; unsigned long pc_base; char devname[32]; + int irq1 = idev->irq[0]; + int irq2 = idev->irq[1]; + + /* Translate IRQs to IM-PD1 local numberspace */ + if (irq1) + irq1 += irq_base; + if (irq2) + irq2 += irq_base; pc_base = dev->resource.start + idev->offset; snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12); d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K, - dev->irq, dev->irq, + irq1, irq2, idev->platform_data, idev->id, &dev->resource); if (IS_ERR(d)) { @@ -353,14 +383,6 @@ static int impd1_probe(struct lm_device *dev) } return 0; - - free_impd1: - if (impd1 && impd1->base) - iounmap(impd1->base); - kfree(impd1); - release_lm: - release_mem_region(dev->resource.start, SZ_4K); - return ret; } static int impd1_remove_one(struct device *dev, void *data) @@ -371,21 +393,20 @@ static int impd1_remove_one(struct device *dev, void *data) static void impd1_remove(struct lm_device *dev) { - struct impd1_module *impd1 = lm_get_drvdata(dev); - device_for_each_child(&dev->dev, NULL, impd1_remove_one); integrator_impd1_clk_exit(dev->id); lm_set_drvdata(dev, NULL); - - iounmap(impd1->base); - kfree(impd1); - release_mem_region(dev->resource.start, SZ_4K); } static struct lm_driver impd1_driver = { .drv = { .name = "impd1", + /* + * As we're dropping the probe() function, suppress driver + * binding from sysfs. + */ + .suppress_bind_attrs = true, }, .probe = impd1_probe, .remove = impd1_remove, diff --git a/arch/arm/mach-integrator/include/mach/impd1.h b/arch/arm/mach-integrator/impd1.h index d75de4b1423..76de4dc9bee 100644 --- a/arch/arm/mach-integrator/include/mach/impd1.h +++ b/arch/arm/mach-integrator/impd1.h @@ -1,6 +1,3 @@ -#define IMPD1_OSC1 0x00 -#define IMPD1_OSC2 0x04 -#define IMPD1_LOCK 0x08 #define IMPD1_LEDS 0x0c #define IMPD1_INT 0x10 #define IMPD1_SW 0x14 @@ -15,4 +12,3 @@ struct device; void impd1_tweak_control(struct device *dev, u32 mask, u32 val); - diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h deleted file mode 100644 index 65fed7c0eb8..00000000000 --- a/arch/arm/mach-integrator/include/mach/hardware.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/hardware.h - * - * This file contains the hardware definitions of the Integrator. - * - * Copyright (C) 1999 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/sizes.h> - -/* - * Where in virtual memory the IO devices (timers, system controllers - * and so on) - */ -#define IO_BASE 0xF0000000 // VA of IO -#define IO_SIZE 0x0B000000 // How much? -#define IO_START INTEGRATOR_HDR_BASE // PA of IO - -/* macro to get at IO space when running virtually */ -#ifdef CONFIG_MMU -#define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE) -#else -#define IO_ADDRESS(x) (x) -#endif - -#define __io_address(n) ((void __iomem *)IO_ADDRESS(n)) - -#endif - diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h deleted file mode 100644 index eff0adad9ae..00000000000 --- a/arch/arm/mach-integrator/include/mach/irqs.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/irqs.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Interrupt numbers, all of the above are just static reservations - * used so they can be encoded into device resources. They will finally - * be done away with when switching to device tree. - */ -#define IRQ_PIC_START 64 -#define IRQ_SOFTINT (IRQ_PIC_START+0) -#define IRQ_UARTINT0 (IRQ_PIC_START+1) -#define IRQ_UARTINT1 (IRQ_PIC_START+2) -#define IRQ_KMIINT0 (IRQ_PIC_START+3) -#define IRQ_KMIINT1 (IRQ_PIC_START+4) -#define IRQ_TIMERINT0 (IRQ_PIC_START+5) -#define IRQ_TIMERINT1 (IRQ_PIC_START+6) -#define IRQ_TIMERINT2 (IRQ_PIC_START+7) -#define IRQ_RTCINT (IRQ_PIC_START+8) -#define IRQ_AP_EXPINT0 (IRQ_PIC_START+9) -#define IRQ_AP_EXPINT1 (IRQ_PIC_START+10) -#define IRQ_AP_EXPINT2 (IRQ_PIC_START+11) -#define IRQ_AP_EXPINT3 (IRQ_PIC_START+12) -#define IRQ_AP_PCIINT0 (IRQ_PIC_START+13) -#define IRQ_AP_PCIINT1 (IRQ_PIC_START+14) -#define IRQ_AP_PCIINT2 (IRQ_PIC_START+15) -#define IRQ_AP_PCIINT3 (IRQ_PIC_START+16) -#define IRQ_AP_V3INT (IRQ_PIC_START+17) -#define IRQ_AP_CPINT0 (IRQ_PIC_START+18) -#define IRQ_AP_CPINT1 (IRQ_PIC_START+19) -#define IRQ_AP_LBUSTIMEOUT (IRQ_PIC_START+20) -#define IRQ_AP_APCINT (IRQ_PIC_START+21) -#define IRQ_CP_CLCDCINT (IRQ_PIC_START+22) -#define IRQ_CP_MMCIINT0 (IRQ_PIC_START+23) -#define IRQ_CP_MMCIINT1 (IRQ_PIC_START+24) -#define IRQ_CP_AACIINT (IRQ_PIC_START+25) -#define IRQ_CP_CPPLDINT (IRQ_PIC_START+26) -#define IRQ_CP_ETHINT (IRQ_PIC_START+27) -#define IRQ_CP_TSPENINT (IRQ_PIC_START+28) -#define IRQ_PIC_END (IRQ_PIC_START+28) - -#define IRQ_CIC_START (IRQ_PIC_END+1) -#define IRQ_CM_SOFTINT (IRQ_CIC_START+0) -#define IRQ_CM_COMMRX (IRQ_CIC_START+1) -#define IRQ_CM_COMMTX (IRQ_CIC_START+2) -#define IRQ_CIC_END (IRQ_CIC_START+2) - -/* - * IntegratorCP only - */ -#define IRQ_SIC_START (IRQ_CIC_END+1) -#define IRQ_SIC_CP_SOFTINT (IRQ_SIC_START+0) -#define IRQ_SIC_CP_RI0 (IRQ_SIC_START+1) -#define IRQ_SIC_CP_RI1 (IRQ_SIC_START+2) -#define IRQ_SIC_CP_CARDIN (IRQ_SIC_START+3) -#define IRQ_SIC_CP_LMINT0 (IRQ_SIC_START+4) -#define IRQ_SIC_CP_LMINT1 (IRQ_SIC_START+5) -#define IRQ_SIC_CP_LMINT2 (IRQ_SIC_START+6) -#define IRQ_SIC_CP_LMINT3 (IRQ_SIC_START+7) -#define IRQ_SIC_CP_LMINT4 (IRQ_SIC_START+8) -#define IRQ_SIC_CP_LMINT5 (IRQ_SIC_START+9) -#define IRQ_SIC_CP_LMINT6 (IRQ_SIC_START+10) -#define IRQ_SIC_CP_LMINT7 (IRQ_SIC_START+11) -#define IRQ_SIC_END (IRQ_SIC_START+11) diff --git a/arch/arm/mach-integrator/include/mach/timex.h b/arch/arm/mach-integrator/include/mach/timex.h deleted file mode 100644 index 1dcb42028c8..00000000000 --- a/arch/arm/mach-integrator/include/mach/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/timex.h - * - * Integrator architecture timex specifications - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * ?? - */ -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index d9e95e612fc..660ca6feff4 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -42,27 +42,29 @@ #include <linux/sys_soc.h> #include <linux/termios.h> #include <linux/sched_clock.h> +#include <linux/clk-provider.h> -#include <mach/hardware.h> -#include <mach/platform.h> #include <asm/hardware/arm_timer.h> #include <asm/setup.h> #include <asm/param.h> /* HZ */ #include <asm/mach-types.h> -#include <mach/lm.h> -#include <mach/irqs.h> - #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include "hardware.h" +#include "cm.h" #include "common.h" #include "pci_v3.h" +#include "lm.h" /* Base address to the AP system controller */ void __iomem *ap_syscon_base; +/* Base address to the external bus interface */ +static void __iomem *ebi_base; + /* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx @@ -72,15 +74,11 @@ void __iomem *ap_syscon_base; * just for now). */ #define VA_IC_BASE __io_address(INTEGRATOR_IC_BASE) -#define VA_EBI_BASE __io_address(INTEGRATOR_EBI_BASE) -#define VA_CMIC_BASE __io_address(INTEGRATOR_HDR_IC) /* * Logical Physical * ef000000 Cache flush - * f1000000 10000000 Core module registers * f1100000 11000000 System controller registers - * f1200000 12000000 EBI registers * f1300000 13000000 Counter/Timer * f1400000 14000000 Interrupt controller * f1600000 16000000 UART 0 @@ -91,16 +89,6 @@ void __iomem *ap_syscon_base; static struct map_desc ap_io_desc[] __initdata __maybe_unused = { { - .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE), .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE), .length = SZ_4K, @@ -146,7 +134,7 @@ static int irq_suspend(void) static void irq_resume(void) { /* disable all irq sources */ - writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); + cm_clear_irqs(); writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR); writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR); @@ -174,9 +162,6 @@ device_initcall(irq_syscore_init); /* * Flash handling. */ -#define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET) -#define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET) - static int ap_flash_init(struct platform_device *dev) { u32 tmp; @@ -184,13 +169,15 @@ static int ap_flash_init(struct platform_device *dev) writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); - tmp = readl(EBI_CSR1) | INTEGRATOR_EBI_WRITE_ENABLE; - writel(tmp, EBI_CSR1); + tmp = readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) | + INTEGRATOR_EBI_WRITE_ENABLE; + writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); - if (!(readl(EBI_CSR1) & INTEGRATOR_EBI_WRITE_ENABLE)) { - writel(0xa05f, EBI_LOCK); - writel(tmp, EBI_CSR1); - writel(0, EBI_LOCK); + if (!(readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) + & INTEGRATOR_EBI_WRITE_ENABLE)) { + writel(0xa05f, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); + writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); + writel(0, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); } return 0; } @@ -202,13 +189,15 @@ static void ap_flash_exit(struct platform_device *dev) writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); - tmp = readl(EBI_CSR1) & ~INTEGRATOR_EBI_WRITE_ENABLE; - writel(tmp, EBI_CSR1); + tmp = readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) & + ~INTEGRATOR_EBI_WRITE_ENABLE; + writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); - if (readl(EBI_CSR1) & INTEGRATOR_EBI_WRITE_ENABLE) { - writel(0xa05f, EBI_LOCK); - writel(tmp, EBI_CSR1); - writel(0, EBI_LOCK); + if (readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) & + INTEGRATOR_EBI_WRITE_ENABLE) { + writel(0xa05f, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); + writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); + writel(0, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); } } @@ -277,7 +266,7 @@ struct amba_pl010_data ap_uart_data = { static unsigned long timer_reload; -static u32 notrace integrator_read_sched_clock(void) +static u64 notrace integrator_read_sched_clock(void) { return -readl((void __iomem *) TIMER2_VA_BASE + TIMER_VALUE); } @@ -298,7 +287,7 @@ static void integrator_clocksource_init(unsigned long inrate, clocksource_mmio_init(base + TIMER_VALUE, "timer2", rate, 200, 16, clocksource_mmio_readl_down); - setup_sched_clock(integrator_read_sched_clock, 16, rate); + sched_clock_register(integrator_read_sched_clock, 16, rate); } static void __iomem * clkevt_base; @@ -368,7 +357,7 @@ static struct clock_event_device integrator_clockevent = { static struct irqaction integrator_timer_irq = { .name = "timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = integrator_timer_interrupt, .dev_id = &integrator_clockevent, }; @@ -402,8 +391,6 @@ void __init ap_init_early(void) { } -#ifdef CONFIG_OF - static void __init ap_of_timer_init(void) { struct device_node *node; @@ -414,10 +401,7 @@ static void __init ap_of_timer_init(void) struct clk *clk; unsigned long rate; - clk = clk_get_sys("ap_timer", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - rate = clk_get_rate(clk); + of_clk_init(NULL); err = of_property_read_string(of_aliases, "arm,timer-primary", &path); @@ -427,6 +411,12 @@ static void __init ap_of_timer_init(void) base = of_iomap(node, 0); if (WARN_ON(!base)) return; + + clk = of_clk_get(node, 0); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + rate = clk_get_rate(clk); + writel(0, base + TIMER_CTRL); integrator_clocksource_init(rate, base); @@ -439,6 +429,12 @@ static void __init ap_of_timer_init(void) if (WARN_ON(!base)) return; irq = irq_of_parse_and_map(node, 0); + + clk = of_clk_get(node, 0); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + rate = clk_get_rate(clk); + writel(0, base + TIMER_CTRL); integrator_clockevent_init(rate, base, irq); } @@ -450,10 +446,8 @@ static const struct of_device_id fpga_irq_of_match[] __initconst = { static void __init ap_init_irq_of(void) { - /* disable core module IRQs */ - writel(0xffffffffU, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); + cm_init(); of_irq_init(fpga_irq_of_match); - integrator_clk_init(false); } /* For the Device Tree, add in the UART callbacks as AUXDATA */ @@ -473,29 +467,43 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = { { /* sentinel */ }, }; +static const struct of_device_id ap_syscon_match[] = { + { .compatible = "arm,integrator-ap-syscon"}, + { }, +}; + +static const struct of_device_id ebi_match[] = { + { .compatible = "arm,external-bus-interface"}, + { }, +}; + static void __init ap_init_of(void) { unsigned long sc_dec; - struct device_node *root; struct device_node *syscon; + struct device_node *ebi; struct device *parent; struct soc_device *soc_dev; struct soc_device_attribute *soc_dev_attr; u32 ap_sc_id; - int err; int i; - /* Here we create an SoC device for the root node */ - root = of_find_node_by_path("/"); - if (!root) - return; - syscon = of_find_node_by_path("/syscon"); + syscon = of_find_matching_node(NULL, ap_syscon_match); if (!syscon) return; + ebi = of_find_matching_node(NULL, ebi_match); + if (!ebi) + return; ap_syscon_base = of_iomap(syscon, 0); if (!ap_syscon_base) return; + ebi_base = of_iomap(ebi, 0); + if (!ebi_base) + return; + + of_platform_populate(NULL, of_default_bus_match_table, + ap_auxdata_lookup, NULL); ap_sc_id = readl(ap_syscon_base); @@ -503,13 +511,8 @@ static void __init ap_init_of(void) if (!soc_dev_attr) return; - err = of_property_read_string(root, "compatible", - &soc_dev_attr->soc_id); - if (err) - return; - err = of_property_read_string(root, "model", &soc_dev_attr->machine); - if (err) - return; + soc_dev_attr->soc_id = "XVC"; + soc_dev_attr->machine = "Integrator/AP"; soc_dev_attr->family = "Integrator"; soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c", 'A' + (ap_sc_id & 0x0f)); @@ -524,9 +527,6 @@ static void __init ap_init_of(void) parent = soc_device_to_device(soc_dev); integrator_init_sysfs(parent, ap_sc_id); - of_platform_populate(root, of_default_bus_match_table, - ap_auxdata_lookup, parent); - sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { struct lm_device *lmdev; @@ -541,7 +541,7 @@ static void __init ap_init_of(void) lmdev->resource.start = 0xc0000000 + 0x10000000 * i; lmdev->resource.end = lmdev->resource.start + 0x0fffffff; lmdev->resource.flags = IORESOURCE_MEM; - lmdev->irq = IRQ_AP_EXPINT0 + i; + lmdev->irq = irq_of_parse_and_map(syscon, i); lmdev->id = i; lm_device_register(lmdev); @@ -564,136 +564,3 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)") .restart = integrator_restart, .dt_compat = ap_dt_board_compat, MACHINE_END - -#endif - -#ifdef CONFIG_ATAGS - -/* - * For the ATAG boot some static mappings are needed. This will - * go away with the ATAG support down the road. - */ - -static struct map_desc ap_io_desc_atag[] __initdata = { - { - .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, -}; - -static void __init ap_map_io_atag(void) -{ - iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag)); - ap_map_io(); -} - -/* - * This is where non-devicetree initialization code is collected and stashed - * for eventual deletion. - */ - -static struct platform_device pci_v3_device = { - .name = "pci-v3", - .id = 0, -}; - -static struct resource cfi_flash_resource = { - .start = INTEGRATOR_FLASH_BASE, - .end = INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device cfi_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ap_flash_data, - }, - .num_resources = 1, - .resource = &cfi_flash_resource, -}; - -static void __init ap_timer_init(void) -{ - struct clk *clk; - unsigned long rate; - - clk = clk_get_sys("ap_timer", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - rate = clk_get_rate(clk); - - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - - integrator_clocksource_init(rate, (void __iomem *)TIMER2_VA_BASE); - integrator_clockevent_init(rate, (void __iomem *)TIMER1_VA_BASE, - IRQ_TIMERINT1); -} - -#define INTEGRATOR_SC_VALID_INT 0x003fffff - -static void __init ap_init_irq(void) -{ - /* Disable all interrupts initially. */ - /* Do the core module ones */ - writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); - - /* do the header card stuff next */ - writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR); - writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR); - - fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START, - -1, INTEGRATOR_SC_VALID_INT, NULL); - integrator_clk_init(false); -} - -static void __init ap_init(void) -{ - unsigned long sc_dec; - int i; - - platform_device_register(&pci_v3_device); - platform_device_register(&cfi_flash_device); - - ap_syscon_base = __io_address(INTEGRATOR_SC_BASE); - sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); - for (i = 0; i < 4; i++) { - struct lm_device *lmdev; - - if ((sc_dec & (16 << i)) == 0) - continue; - - lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL); - if (!lmdev) - continue; - - lmdev->resource.start = 0xc0000000 + 0x10000000 * i; - lmdev->resource.end = lmdev->resource.start + 0x0fffffff; - lmdev->resource.flags = IORESOURCE_MEM; - lmdev->irq = IRQ_AP_EXPINT0 + i; - lmdev->id = i; - - lm_device_register(lmdev); - } - - integrator_init(false); -} - -MACHINE_START(INTEGRATOR, "ARM-Integrator") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .reserve = integrator_reserve, - .map_io = ap_map_io_atag, - .init_early = ap_init_early, - .init_irq = ap_init_irq, - .handle_irq = fpga_handle_irq, - .init_time = ap_timer_init, - .init_machine = ap_init, - .restart = integrator_restart, -MACHINE_END - -#endif diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 8c60fcb08a9..0e57f8f820a 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -23,33 +23,23 @@ #include <linux/irqchip/versatile-fpga.h> #include <linux/gfp.h> #include <linux/mtd/physmap.h> -#include <linux/platform_data/clk-integrator.h> #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/sys_soc.h> +#include <linux/sched_clock.h> -#include <mach/hardware.h> -#include <mach/platform.h> #include <asm/setup.h> #include <asm/mach-types.h> -#include <asm/hardware/arm_timer.h> -#include <asm/hardware/icst.h> - -#include <mach/cm.h> -#include <mach/lm.h> -#include <mach/irqs.h> - #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <asm/hardware/timer-sp.h> - #include <plat/clcd.h> -#include <plat/sched_clock.h> +#include "hardware.h" +#include "cm.h" #include "common.h" /* Base address to the CP controller */ @@ -66,8 +56,6 @@ static void __iomem *intcp_con_base; /* * Logical Physical * f1000000 10000000 Core module registers - * f1100000 11000000 System controller registers - * f1200000 12000000 EBI registers * f1300000 13000000 Counter/Timer * f1400000 14000000 Interrupt controller * f1600000 16000000 UART 0 @@ -75,7 +63,6 @@ static void __iomem *intcp_con_base; * f1a00000 1a000000 Debug LEDs * fc900000 c9000000 GPIO * fca00000 ca000000 SIC - * fcb00000 cb000000 CP system control */ static struct map_desc intcp_io_desc[] __initdata __maybe_unused = { @@ -85,11 +72,6 @@ static struct map_desc intcp_io_desc[] __initdata __maybe_unused = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE), .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE), .length = SZ_4K, @@ -199,7 +181,8 @@ static struct mmci_platform_data mmc_data = { static void cp_clcd_enable(struct clcd_fb *fb) { struct fb_var_screeninfo *var = &fb->fb.var; - u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2; + u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2 + | CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1; if (var->bits_per_pixel <= 8 || (var->bits_per_pixel == 16 && var->green.length == 5)) @@ -242,14 +225,16 @@ static struct clcd_board clcd_data = { #define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28) +static u64 notrace intcp_read_sched_clock(void) +{ + return readl(REFCOUNTER); +} + static void __init intcp_init_early(void) { -#ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK - versatile_sched_clock_init(REFCOUNTER, 24000000); -#endif + sched_clock_register(intcp_read_sched_clock, 32, 24000000); } -#ifdef CONFIG_OF static const struct of_device_id fpga_irq_of_match[] __initconst = { { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, { /* Sentinel */ } @@ -257,8 +242,8 @@ static const struct of_device_id fpga_irq_of_match[] __initconst = { static void __init intcp_init_irq_of(void) { + cm_init(); of_irq_init(fpga_irq_of_match); - integrator_clk_init(true); } /* @@ -287,21 +272,20 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = { { /* sentinel */ }, }; +static const struct of_device_id intcp_syscon_match[] = { + { .compatible = "arm,integrator-cp-syscon"}, + { }, +}; + static void __init intcp_init_of(void) { - struct device_node *root; struct device_node *cpcon; struct device *parent; struct soc_device *soc_dev; struct soc_device_attribute *soc_dev_attr; u32 intcp_sc_id; - int err; - /* Here we create an SoC device for the root node */ - root = of_find_node_by_path("/"); - if (!root) - return; - cpcon = of_find_node_by_path("/cpcon"); + cpcon = of_find_matching_node(NULL, intcp_syscon_match); if (!cpcon) return; @@ -309,19 +293,17 @@ static void __init intcp_init_of(void) if (!intcp_con_base) return; + of_platform_populate(NULL, of_default_bus_match_table, + intcp_auxdata_lookup, NULL); + intcp_sc_id = readl(intcp_con_base); soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) return; - err = of_property_read_string(root, "compatible", - &soc_dev_attr->soc_id); - if (err) - return; - err = of_property_read_string(root, "model", &soc_dev_attr->machine); - if (err) - return; + soc_dev_attr->soc_id = "XCV"; + soc_dev_attr->machine = "Integrator/CP"; soc_dev_attr->family = "Integrator"; soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c", 'A' + (intcp_sc_id & 0x0f)); @@ -335,8 +317,6 @@ static void __init intcp_init_of(void) parent = soc_device_to_device(soc_dev); integrator_init_sysfs(parent, intcp_sc_id); - of_platform_populate(root, of_default_bus_match_table, - intcp_auxdata_lookup, parent); } static const char * intcp_dt_board_compat[] = { @@ -354,175 +334,3 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)") .restart = integrator_restart, .dt_compat = intcp_dt_board_compat, MACHINE_END - -#endif - -#ifdef CONFIG_ATAGS - -/* - * For the ATAG boot some static mappings are needed. This will - * go away with the ATAG support down the road. - */ - -static struct map_desc intcp_io_desc_atag[] __initdata = { - { - .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, -}; - -static void __init intcp_map_io_atag(void) -{ - iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag)); - intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE); - intcp_map_io(); -} - - -/* - * This is where non-devicetree initialization code is collected and stashed - * for eventual deletion. - */ - -#define INTCP_FLASH_SIZE SZ_32M - -static struct resource intcp_flash_resource = { - .start = INTCP_PA_FLASH_BASE, - .end = INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device intcp_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &intcp_flash_data, - }, - .num_resources = 1, - .resource = &intcp_flash_resource, -}; - -#define INTCP_ETH_SIZE 0x10 - -static struct resource smc91x_resources[] = { - [0] = { - .start = INTEGRATOR_CP_ETH_BASE, - .end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_CP_ETHINT, - .end = IRQ_CP_ETHINT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct platform_device *intcp_devs[] __initdata = { - &intcp_flash_device, - &smc91x_device, -}; - -#define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40) -#define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE) -#define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE) - -static void __init intcp_init_irq(void) -{ - u32 pic_mask, cic_mask, sic_mask; - - /* These masks are for the HW IRQ registers */ - pic_mask = ~((~0u) << (11 - 0)); - pic_mask |= (~((~0u) << (29 - 22))) << 22; - cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)); - sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START)); - - /* - * Disable all interrupt sources - */ - writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); - writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR); - writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); - writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR); - writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); - writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR); - - fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START, - -1, pic_mask, NULL); - - fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START, - -1, cic_mask, NULL); - - fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START, - IRQ_CP_CPPLDINT, sic_mask, NULL); - - integrator_clk_init(true); -} - -#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) -#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE) -#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE) - -static void __init cp_timer_init(void) -{ - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - - sp804_clocksource_init(TIMER2_VA_BASE, "timer2"); - sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1"); -} - -#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 } -#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT } - -static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE, - INTEGRATOR_CP_MMC_IRQS, &mmc_data); - -static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE, - INTEGRATOR_CP_AACI_IRQS, NULL); - -static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE, - { IRQ_CP_CLCDCINT }, &clcd_data); - -static struct amba_device *amba_devs[] __initdata = { - &mmc_device, - &aaci_device, - &clcd_device, -}; - -static void __init intcp_init(void) -{ - int i; - - platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs)); - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } - integrator_init(true); -} - -MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .reserve = integrator_reserve, - .map_io = intcp_map_io_atag, - .init_early = intcp_init_early, - .init_irq = intcp_init_irq, - .handle_irq = fpga_handle_irq, - .init_time = cp_timer_init, - .init_machine = intcp_init, - .restart = integrator_restart, -MACHINE_END - -#endif diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c index 7a7f6d3273b..f1dcb57a59e 100644 --- a/arch/arm/mach-integrator/leds.c +++ b/arch/arm/mach-integrator/leds.c @@ -11,9 +11,8 @@ #include <linux/slab.h> #include <linux/leds.h> -#include <mach/cm.h> -#include <mach/hardware.h> -#include <mach/platform.h> +#include "hardware.h" +#include "cm.h" #if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) @@ -78,7 +77,7 @@ static void cm_led_set(struct led_classdev *cdev, static enum led_brightness cm_led_get(struct led_classdev *cdev) { - u32 reg = readl(CM_CTRL); + u32 reg = cm_get(); return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF; } diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c index f52c7af31ea..3f9e9f04316 100644 --- a/arch/arm/mach-integrator/lm.c +++ b/arch/arm/mach-integrator/lm.c @@ -12,7 +12,7 @@ #include <linux/device.h> #include <linux/slab.h> -#include <mach/lm.h> +#include "lm.h" #define to_lm_device(d) container_of(d, struct lm_device, dev) #define to_lm_driver(d) container_of(d, struct lm_driver, drv) diff --git a/arch/arm/mach-integrator/include/mach/lm.h b/arch/arm/mach-integrator/lm.h index 28186b6f2c0..28186b6f2c0 100644 --- a/arch/arm/mach-integrator/include/mach/lm.h +++ b/arch/arm/mach-integrator/lm.h diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index bef100527c4..05e1f73a1e8 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -34,16 +34,13 @@ #include <linux/of_pci.h> #include <video/vga.h> -#include <mach/hardware.h> -#include <mach/platform.h> -#include <mach/irqs.h> - #include <asm/mach/map.h> #include <asm/signal.h> #include <asm/mach/pci.h> #include <asm/irq_regs.h> #include "pci_v3.h" +#include "hardware.h" /* * Where in the memory map does PCI live? @@ -605,7 +602,7 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) return 1; } -static irqreturn_t v3_irq(int dummy, void *devid) +static irqreturn_t v3_irq(int irq, void *devid) { #ifdef CONFIG_DEBUG_LL struct pt_regs *regs = get_irq_regs(); @@ -615,7 +612,7 @@ static irqreturn_t v3_irq(int dummy, void *devid) extern void printascii(const char *); sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " - "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, + "ISTAT=%02x\n", irq, pc, instr, __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255, v3_readb(V3_LB_ISTAT)); @@ -809,21 +806,6 @@ static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp) return pci_common_swizzle(dev, pinp); } -static int irq_tab[4] __initdata = { - IRQ_AP_PCIINT0, IRQ_AP_PCIINT1, IRQ_AP_PCIINT2, IRQ_AP_PCIINT3 -}; - -/* - * map the specified device/slot/pin to an IRQ. This works out such - * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1. - */ -static int __init pci_v3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int intnr = ((slot - 9) + (pin - 1)) & 3; - - return irq_tab[intnr]; -} - static struct hw_pci pci_v3 __initdata = { .swizzle = pci_v3_swizzle, .setup = pci_v3_setup, @@ -833,32 +815,27 @@ static struct hw_pci pci_v3 __initdata = { .postinit = pci_v3_postinit, }; -#ifdef CONFIG_OF - -static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin) -{ - struct of_irq oirq; - int ret; - - ret = of_irq_map_pci(dev, &oirq); - if (ret) { - dev_err(&dev->dev, "of_irq_map_pci() %d\n", ret); - /* Proper return code 0 == NO_IRQ */ - return 0; - } - - return irq_create_of_mapping(oirq.controller, oirq.specifier, - oirq.size); -} - -static int __init pci_v3_dtprobe(struct platform_device *pdev, - struct device_node *np) +static int __init pci_v3_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct of_pci_range_parser parser; struct of_pci_range range; struct resource *res; int irq, ret; + /* Remap the Integrator system controller */ + ap_syscon_base = devm_ioremap(&pdev->dev, INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) { + dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n"); + return -ENODEV; + } + + /* Device tree probe path */ + if (!np) { + dev_err(&pdev->dev, "no device tree node for PCIv3\n"); + return -ENODEV; + } + if (of_pci_range_parser_init(&parser, np)) return -EINVAL; @@ -919,77 +896,7 @@ static int __init pci_v3_dtprobe(struct platform_device *pdev, return -EINVAL; } - pci_v3.map_irq = pci_v3_map_irq_dt; - pci_common_init_dev(&pdev->dev, &pci_v3); - - return 0; -} - -#else - -static inline int pci_v3_dtprobe(struct platform_device *pdev, - struct device_node *np) -{ - return -EINVAL; -} - -#endif - -static int __init pci_v3_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - int ret; - - /* Remap the Integrator system controller */ - ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); - if (!ap_syscon_base) { - dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n"); - return -ENODEV; - } - - /* Device tree probe path */ - if (np) - return pci_v3_dtprobe(pdev, np); - - pci_v3_base = devm_ioremap(&pdev->dev, PHYS_PCI_V3_BASE, SZ_64K); - if (!pci_v3_base) { - dev_err(&pdev->dev, "unable to remap PCIv3 base\n"); - return -ENODEV; - } - - ret = devm_request_irq(&pdev->dev, IRQ_AP_V3INT, v3_irq, 0, "V3", NULL); - if (ret) { - dev_err(&pdev->dev, "unable to grab PCI error interrupt: %d\n", - ret); - return -ENODEV; - } - - conf_mem.name = "PCIv3 config"; - conf_mem.start = PHYS_PCI_CONFIG_BASE; - conf_mem.end = PHYS_PCI_CONFIG_BASE + SZ_16M - 1; - conf_mem.flags = IORESOURCE_MEM; - - io_mem.name = "PCIv3 I/O"; - io_mem.start = PHYS_PCI_IO_BASE; - io_mem.end = PHYS_PCI_IO_BASE + SZ_16M - 1; - io_mem.flags = IORESOURCE_MEM; - - non_mem_pci = 0x00000000; - non_mem_pci_sz = SZ_256M; - non_mem.name = "PCIv3 non-prefetched mem"; - non_mem.start = PHYS_PCI_MEM_BASE; - non_mem.end = PHYS_PCI_MEM_BASE + SZ_256M - 1; - non_mem.flags = IORESOURCE_MEM; - - pre_mem_pci = 0x10000000; - pre_mem_pci_sz = SZ_256M; - pre_mem.name = "PCIv3 prefetched mem"; - pre_mem.start = PHYS_PCI_PRE_BASE + SZ_256M; - pre_mem.end = PHYS_PCI_PRE_BASE + SZ_256M - 1; - pre_mem.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; - - pci_v3.map_irq = pci_v3_map_irq; - + pci_v3.map_irq = of_irq_parse_and_map_pci; pci_common_init_dev(&pdev->dev, &pci_v3); return 0; |