diff options
Diffstat (limited to 'arch/arm/mach-integrator/pci_v3.c')
| -rw-r--r-- | arch/arm/mach-integrator/pci_v3.c | 131 |
1 files changed, 19 insertions, 112 deletions
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index bef100527c4..05e1f73a1e8 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -34,16 +34,13 @@ #include <linux/of_pci.h> #include <video/vga.h> -#include <mach/hardware.h> -#include <mach/platform.h> -#include <mach/irqs.h> - #include <asm/mach/map.h> #include <asm/signal.h> #include <asm/mach/pci.h> #include <asm/irq_regs.h> #include "pci_v3.h" +#include "hardware.h" /* * Where in the memory map does PCI live? @@ -605,7 +602,7 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) return 1; } -static irqreturn_t v3_irq(int dummy, void *devid) +static irqreturn_t v3_irq(int irq, void *devid) { #ifdef CONFIG_DEBUG_LL struct pt_regs *regs = get_irq_regs(); @@ -615,7 +612,7 @@ static irqreturn_t v3_irq(int dummy, void *devid) extern void printascii(const char *); sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " - "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, + "ISTAT=%02x\n", irq, pc, instr, __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255, v3_readb(V3_LB_ISTAT)); @@ -809,21 +806,6 @@ static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp) return pci_common_swizzle(dev, pinp); } -static int irq_tab[4] __initdata = { - IRQ_AP_PCIINT0, IRQ_AP_PCIINT1, IRQ_AP_PCIINT2, IRQ_AP_PCIINT3 -}; - -/* - * map the specified device/slot/pin to an IRQ. This works out such - * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1. - */ -static int __init pci_v3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int intnr = ((slot - 9) + (pin - 1)) & 3; - - return irq_tab[intnr]; -} - static struct hw_pci pci_v3 __initdata = { .swizzle = pci_v3_swizzle, .setup = pci_v3_setup, @@ -833,32 +815,27 @@ static struct hw_pci pci_v3 __initdata = { .postinit = pci_v3_postinit, }; -#ifdef CONFIG_OF - -static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin) -{ - struct of_irq oirq; - int ret; - - ret = of_irq_map_pci(dev, &oirq); - if (ret) { - dev_err(&dev->dev, "of_irq_map_pci() %d\n", ret); - /* Proper return code 0 == NO_IRQ */ - return 0; - } - - return irq_create_of_mapping(oirq.controller, oirq.specifier, - oirq.size); -} - -static int __init pci_v3_dtprobe(struct platform_device *pdev, - struct device_node *np) +static int __init pci_v3_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct of_pci_range_parser parser; struct of_pci_range range; struct resource *res; int irq, ret; + /* Remap the Integrator system controller */ + ap_syscon_base = devm_ioremap(&pdev->dev, INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) { + dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n"); + return -ENODEV; + } + + /* Device tree probe path */ + if (!np) { + dev_err(&pdev->dev, "no device tree node for PCIv3\n"); + return -ENODEV; + } + if (of_pci_range_parser_init(&parser, np)) return -EINVAL; @@ -919,77 +896,7 @@ static int __init pci_v3_dtprobe(struct platform_device *pdev, return -EINVAL; } - pci_v3.map_irq = pci_v3_map_irq_dt; - pci_common_init_dev(&pdev->dev, &pci_v3); - - return 0; -} - -#else - -static inline int pci_v3_dtprobe(struct platform_device *pdev, - struct device_node *np) -{ - return -EINVAL; -} - -#endif - -static int __init pci_v3_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - int ret; - - /* Remap the Integrator system controller */ - ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); - if (!ap_syscon_base) { - dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n"); - return -ENODEV; - } - - /* Device tree probe path */ - if (np) - return pci_v3_dtprobe(pdev, np); - - pci_v3_base = devm_ioremap(&pdev->dev, PHYS_PCI_V3_BASE, SZ_64K); - if (!pci_v3_base) { - dev_err(&pdev->dev, "unable to remap PCIv3 base\n"); - return -ENODEV; - } - - ret = devm_request_irq(&pdev->dev, IRQ_AP_V3INT, v3_irq, 0, "V3", NULL); - if (ret) { - dev_err(&pdev->dev, "unable to grab PCI error interrupt: %d\n", - ret); - return -ENODEV; - } - - conf_mem.name = "PCIv3 config"; - conf_mem.start = PHYS_PCI_CONFIG_BASE; - conf_mem.end = PHYS_PCI_CONFIG_BASE + SZ_16M - 1; - conf_mem.flags = IORESOURCE_MEM; - - io_mem.name = "PCIv3 I/O"; - io_mem.start = PHYS_PCI_IO_BASE; - io_mem.end = PHYS_PCI_IO_BASE + SZ_16M - 1; - io_mem.flags = IORESOURCE_MEM; - - non_mem_pci = 0x00000000; - non_mem_pci_sz = SZ_256M; - non_mem.name = "PCIv3 non-prefetched mem"; - non_mem.start = PHYS_PCI_MEM_BASE; - non_mem.end = PHYS_PCI_MEM_BASE + SZ_256M - 1; - non_mem.flags = IORESOURCE_MEM; - - pre_mem_pci = 0x10000000; - pre_mem_pci_sz = SZ_256M; - pre_mem.name = "PCIv3 prefetched mem"; - pre_mem.start = PHYS_PCI_PRE_BASE + SZ_256M; - pre_mem.end = PHYS_PCI_PRE_BASE + SZ_256M - 1; - pre_mem.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; - - pci_v3.map_irq = pci_v3_map_irq; - + pci_v3.map_irq = of_irq_parse_and_map_pci; pci_common_init_dev(&pdev->dev, &pci_v3); return 0; |