1 files changed, 136 insertions, 147 deletions

diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index eaf6c6366ff..e3f3aca43ef 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -11,189 +11,125 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/memblock.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
-#include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 #include <linux/io.h>
-#include <linux/clkdev.h>
+#include <linux/stat.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/cm.h>
-#include <mach/irqs.h>
-
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/time.h>
 #include <asm/pgtable.h>
 
-static struct amba_pl010_data integrator_uart_data;
-
-#define INTEGRATOR_RTC_IRQ	{ IRQ_RTCINT }
-#define INTEGRATOR_UART0_IRQ	{ IRQ_UARTINT0 }
-#define INTEGRATOR_UART1_IRQ	{ IRQ_UARTINT1 }
-#define KMI0_IRQ		{ IRQ_KMIINT0 }
-#define KMI1_IRQ		{ IRQ_KMIINT1 }
-
-static AMBA_APB_DEVICE(rtc, "mb:15", 0,
-	INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
-
-static AMBA_APB_DEVICE(uart0, "mb:16", 0,
-	INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
-
-static AMBA_APB_DEVICE(uart1, "mb:17", 0,
-	INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
+#include "hardware.h"
+#include "cm.h"
+#include "common.h"
 
-static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
-static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&rtc_device,
-	&uart0_device,
-	&uart1_device,
-	&kmi0_device,
-	&kmi1_device,
-};
+static DEFINE_RAW_SPINLOCK(cm_lock);
+static void __iomem *cm_base;
 
-/*
- * These are fixed clocks.
+/**
+ * cm_get - get the value from the CM_CTRL register
  */
-static struct clk clk24mhz = {
-	.rate	= 24000000,
-};
-
-static struct clk uartclk = {
-	.rate	= 14745600,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
-	{	/* Bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {
-		/* Integrator/AP timer frequency */
-		.dev_id		= "ap_timer",
-		.clk		= &clk24mhz,
-	}, {	/* UART0 */
-		.dev_id		= "mb:16",
-		.clk		= &uartclk,
-	}, {	/* UART1 */
-		.dev_id		= "mb:17",
-		.clk		= &uartclk,
-	}, {	/* KMI0 */
-		.dev_id		= "mb:18",
-		.clk		= &clk24mhz,
-	}, {	/* KMI1 */
-		.dev_id		= "mb:19",
-		.clk		= &clk24mhz,
-	}, {	/* MMCI - IntegratorCP */
-		.dev_id		= "mb:1c",
-		.clk		= &uartclk,
-	}
-};
-
-void __init integrator_init_early(void)
+u32 cm_get(void)
 {
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+	return readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
 }
 
-static int __init integrator_init(void)
+/**
+ * cm_control - update the CM_CTRL register.
+ * @mask: bits to change
+ * @set: bits to set
+ */
+void cm_control(u32 mask, u32 set)
 {
-	int i;
-
-	/*
-	 * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to
-	 * hard-code them. The Integator/CP and forward have proper cell IDs.
-	 * Else we leave them undefined to the bus driver can autoprobe them.
-	 */
-	if (machine_is_integrator()) {
-		rtc_device.periphid	= 0x00041030;
-		uart0_device.periphid	= 0x00041010;
-		uart1_device.periphid	= 0x00041010;
-		kmi0_device.periphid	= 0x00041050;
-		kmi1_device.periphid	= 0x00041050;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
+	unsigned long flags;
+	u32 val;
 
-	return 0;
+	raw_spin_lock_irqsave(&cm_lock, flags);
+	val = readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET) & ~mask;
+	writel(val | set, cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
+	raw_spin_unlock_irqrestore(&cm_lock, flags);
 }
 
-arch_initcall(integrator_init);
-
-/*
- * On the Integrator platform, the port RTS and DTR are provided by
- * bits in the following SC_CTRLS register bits:
- *        RTS  DTR
- *  UART0  7    6
- *  UART1  5    4
- */
-#define SC_CTRLC	IO_ADDRESS(INTEGRATOR_SC_CTRLC)
-#define SC_CTRLS	IO_ADDRESS(INTEGRATOR_SC_CTRLS)
-
-static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
+static const char *integrator_arch_str(u32 id)
 {
-	unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
-
-	if (dev == &uart0_device) {
-		rts_mask = 1 << 4;
-		dtr_mask = 1 << 5;
-	} else {
-		rts_mask = 1 << 6;
-		dtr_mask = 1 << 7;
+	switch ((id >> 16) & 0xff) {
+	case 0x00:
+		return "ASB little-endian";
+	case 0x01:
+		return "AHB little-endian";
+	case 0x03:
+		return "AHB-Lite system bus, bi-endian";
+	case 0x04:
+		return "AHB";
+	case 0x08:
+		return "AHB system bus, ASB processor bus";
+	default:
+		return "Unknown";
 	}
+}
 
-	if (mctrl & TIOCM_RTS)
-		ctrlc |= rts_mask;
-	else
-		ctrls |= rts_mask;
-
-	if (mctrl & TIOCM_DTR)
-		ctrlc |= dtr_mask;
-	else
-		ctrls |= dtr_mask;
+static const char *integrator_fpga_str(u32 id)
+{
+	switch ((id >> 12) & 0xf) {
+	case 0x01:
+		return "XC4062";
+	case 0x02:
+		return "XC4085";
+	case 0x03:
+		return "XVC600";
+	case 0x04:
+		return "EPM7256AE (Altera PLD)";
+	default:
+		return "Unknown";
+	}
+}
 
-	__raw_writel(ctrls, SC_CTRLS);
-	__raw_writel(ctrlc, SC_CTRLC);
+void cm_clear_irqs(void)
+{
+	/* disable core module IRQs */
+	writel(0xffffffffU, cm_base + INTEGRATOR_HDR_IC_OFFSET +
+		IRQ_ENABLE_CLEAR);
 }
 
-static struct amba_pl010_data integrator_uart_data = {
-	.set_mctrl = integrator_uart_set_mctrl,
+static const struct of_device_id cm_match[] = {
+	{ .compatible = "arm,core-module-integrator"},
+	{ },
 };
 
-#define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_CTRL)
-
-static DEFINE_RAW_SPINLOCK(cm_lock);
-
-/**
- * cm_control - update the CM_CTRL register.
- * @mask: bits to change
- * @set: bits to set
- */
-void cm_control(u32 mask, u32 set)
+void cm_init(void)
 {
-	unsigned long flags;
+	struct device_node *cm = of_find_matching_node(NULL, cm_match);
 	u32 val;
 
-	raw_spin_lock_irqsave(&cm_lock, flags);
-	val = readl(CM_CTRL) & ~mask;
-	writel(val | set, CM_CTRL);
-	raw_spin_unlock_irqrestore(&cm_lock, flags);
+	if (!cm) {
+		pr_crit("no core module node found in device tree\n");
+		return;
+	}
+	cm_base = of_iomap(cm, 0);
+	if (!cm_base) {
+		pr_crit("could not remap core module\n");
+		return;
+	}
+	cm_clear_irqs();
+	val = readl(cm_base + INTEGRATOR_HDR_ID_OFFSET);
+	pr_info("Detected ARM core module:\n");
+	pr_info("    Manufacturer: %02x\n", (val >> 24));
+	pr_info("    Architecture: %s\n", integrator_arch_str(val));
+	pr_info("    FPGA: %s\n", integrator_fpga_str(val));
+	pr_info("    Build: %02x\n", (val >> 4) & 0xFF);
+	pr_info("    Rev: %c\n", ('A' + (val & 0x03)));
 }
 
-EXPORT_SYMBOL(cm_control);
-
 /*
  * We need to stop things allocating the low memory; ideally we need a
  * better implementation of GFP_DMA which does not assume that DMA-able
@@ -207,7 +143,60 @@ void __init integrator_reserve(void)
 /*
  * To reset, we hit the on-board reset register in the system FPGA
  */
-void integrator_restart(char mode, const char *cmd)
+void integrator_restart(enum reboot_mode mode, const char *cmd)
 {
 	cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
 }
+
+static u32 integrator_id;
+
+static ssize_t intcp_get_manf(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	return sprintf(buf, "%02x\n", integrator_id >> 24);
+}
+
+static struct device_attribute intcp_manf_attr =
+	__ATTR(manufacturer,  S_IRUGO, intcp_get_manf,  NULL);
+
+static ssize_t intcp_get_arch(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	return sprintf(buf, "%s\n", integrator_arch_str(integrator_id));
+}
+
+static struct device_attribute intcp_arch_attr =
+	__ATTR(architecture,  S_IRUGO, intcp_get_arch,  NULL);
+
+static ssize_t intcp_get_fpga(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	return sprintf(buf, "%s\n", integrator_fpga_str(integrator_id));
+}
+
+static struct device_attribute intcp_fpga_attr =
+	__ATTR(fpga,  S_IRUGO, intcp_get_fpga,  NULL);
+
+static ssize_t intcp_get_build(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	return sprintf(buf, "%02x\n", (integrator_id >> 4) & 0xFF);
+}
+
+static struct device_attribute intcp_build_attr =
+	__ATTR(build,  S_IRUGO, intcp_get_build,  NULL);
+
+
+
+void integrator_init_sysfs(struct device *parent, u32 id)
+{
+	integrator_id = id;
+	device_create_file(parent, &intcp_manf_attr);
+	device_create_file(parent, &intcp_arch_attr);
+	device_create_file(parent, &intcp_fpga_attr);
+	device_create_file(parent, &intcp_build_attr);
+}