diff options
Diffstat (limited to 'arch/arm/mach-imx/mach-pcm037.c')
| -rw-r--r-- | arch/arm/mach-imx/mach-pcm037.c | 71 |
1 files changed, 41 insertions, 30 deletions
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index e48854b9d99..81b8affb944 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -23,7 +23,7 @@ #include <linux/smsc911x.h> #include <linux/interrupt.h> #include <linux/i2c.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/delay.h> #include <linux/spi/spi.h> #include <linux/irq.h> @@ -32,6 +32,8 @@ #include <linux/usb/ulpi.h> #include <linux/gfp.h> #include <linux/memblock.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <media/soc_camera.h> @@ -40,13 +42,13 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> #include <asm/memblock.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> -#include <mach/ulpi.h> +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" #include "pcm037.h" +#include "ulpi.h" static enum pcm037_board_variant pcm037_instance = PCM037_PCM970; @@ -223,8 +225,7 @@ static struct resource smsc911x_resources[] = { .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -369,9 +370,8 @@ static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq, gpio_direction_input(SDHC1_GPIO_WP); #endif - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, - "sdhc-detect", data); + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq, + IRQF_TRIGGER_FALLING, "sdhc-detect", data); if (ret) goto err_gpio_free_2; @@ -389,7 +389,7 @@ err_gpio_free: static void pcm970_sdhc1_exit(struct device *dev, void *data) { - free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), data); gpio_free(SDHC1_GPIO_DET); gpio_free(SDHC1_GPIO_WP); } @@ -440,10 +440,6 @@ static struct platform_device *devices[] __initdata = { &pcm037_mt9v022, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static const struct fb_videomode fb_modedb[] = { { /* 240x320 @ 60 Hz Sharp */ @@ -509,8 +505,7 @@ static struct resource pcm970_sja1000_resources[] = { .end = MX31_CS5_BASE_ADDR + 0x100 - 1, .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)), - .end = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -555,21 +550,26 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init pcm037_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", pcm037_otg_mode); +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + /* * Board specific initialization. */ @@ -579,6 +579,8 @@ static void __init pcm037_init(void) imx31_soc_init(); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + mxc_iomux_set_gpr(MUX_PGP_UH2, 1); mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), @@ -610,13 +612,13 @@ static void __init pcm037_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); imx31_add_imx_uart0(&uart_pdata); /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */ imx31_add_imx_uart1(&uart_pdata); imx31_add_imx_uart2(&uart_pdata); - imx31_add_mxc_w1(NULL); + imx31_add_mxc_w1(); /* LAN9217 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); @@ -624,6 +626,10 @@ static void __init pcm037_init(void) pr_warning("could not get LAN irq gpio\n"); else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + smsc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + smsc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); platform_device_register(&pcm037_eth); } @@ -637,7 +643,7 @@ static void __init pcm037_init(void) imx31_add_mxc_nand(&pcm037_nand_board_info); imx31_add_mxc_mmc(0, &sdhc_pdata); - imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* CSI */ @@ -650,6 +656,10 @@ static void __init pcm037_init(void) pcm037_init_camera(); + pcm970_sja1000_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); + pcm970_sja1000_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); platform_device_register(&pcm970_sja1000); if (otg_mode_host) { @@ -674,10 +684,6 @@ static void __init pcm037_timer_init(void) mx31_clocks_init(26000000); } -struct sys_timer pcm037_timer = { - .init = pcm037_timer_init, -}; - static void __init pcm037_reserve(void) { /* reserve 4 MiB for mx3-camera */ @@ -685,6 +691,11 @@ static void __init pcm037_reserve(void) MX3_CAMERA_BUF_SIZE); } +static void __init pcm037_init_late(void) +{ + pcm037_eet_init_devices(); +} + MACHINE_START(PCM037, "Phytec Phycore pcm037") /* Maintainer: Pengutronix */ .atag_offset = 0x100, @@ -692,8 +703,8 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, - .timer = &pcm037_timer, + .init_time = pcm037_timer_init, .init_machine = pcm037_init, + .init_late = pcm037_init_late, .restart = mxc_restart, MACHINE_END |