diff options
Diffstat (limited to 'arch/arm/mach-imx/mach-cpuimx27.c')
| -rw-r--r-- | arch/arm/mach-imx/mach-cpuimx27.c | 98 |
1 files changed, 53 insertions, 45 deletions
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 6cf04da2456..75b7b6aa272 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -34,14 +34,12 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/eukrea-baseboards.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx27.h> -#include <mach/mxc_nand.h> -#include <mach/ulpi.h> - +#include "common.h" #include "devices-imx27.h" +#include "eukrea-baseboards.h" +#include "hardware.h" +#include "iomux-mx27.h" +#include "ulpi.h" static const int eukrea_cpuimx27_pins[] __initconst = { /* UART1 */ @@ -50,7 +48,7 @@ static const int eukrea_cpuimx27_pins[] __initconst = { PE14_PF_UART1_CTS, PE15_PF_UART1_RTS, /* UART4 */ -#if defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) PB26_AF_UART4_RTS, PB28_AF_UART4_TXD, PB29_AF_UART4_CTS, @@ -170,28 +168,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = { static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000), - .irq = IRQ_GPIOB(23), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000), - .irq = IRQ_GPIOB(22), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000), - .irq = IRQ_GPIOB(27), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000), - .irq = IRQ_GPIOB(30), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, @@ -209,40 +207,50 @@ static struct platform_device serial_device = { }; #endif -#if defined(CONFIG_USB_ULPI) +static int eukrea_cpuimx27_otg_init(struct platform_device *pdev) +{ + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = eukrea_cpuimx27_otg_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev) +{ + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = eukrea_cpuimx27_usbh2_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -#endif static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx27_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx27_otg_mode); static void __init eukrea_cpuimx27_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); @@ -257,37 +265,39 @@ static void __init eukrea_cpuimx27_init(void) imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(NULL); - imx27_add_mxc_w1(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) /* SDHC2 can be used for Wifi */ imx27_add_mxc_mmc(1, NULL); #endif -#if defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) /* in which case UART4 is also used for Bluetooth */ imx27_add_imx_uart3(&uart_pdata); #endif #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + serial_platform_data[0].irq = IMX_GPIO_NR(2, 23); + serial_platform_data[1].irq = IMX_GPIO_NR(2, 22); + serial_platform_data[2].irq = IMX_GPIO_NR(2, 27); + serial_platform_data[3].irq = IMX_GPIO_NR(2, 30); platform_device_register(&serial_device); #endif -#if defined(CONFIG_USB_ULPI) if (otg_mode_host) { - otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - imx27_add_mxc_ehci_otg(&otg_pdata); + otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (otg_pdata.otg) + imx27_add_mxc_ehci_otg(&otg_pdata); + } else { + imx27_add_fsl_usb2_udc(&otg_device_pdata); } - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - imx27_add_mxc_ehci_hs(2, &usbh2_pdata); -#endif - if (!otg_mode_host) - imx27_add_fsl_usb2_udc(&otg_device_pdata); + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx27_add_mxc_ehci_hs(2, &usbh2_pdata); #ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD eukrea_mbimx27_baseboard_init(); @@ -299,14 +309,12 @@ static void __init eukrea_cpuimx27_timer_init(void) mx27_clocks_init(26000000); } -static struct sys_timer eukrea_cpuimx27_timer = { - .init = eukrea_cpuimx27_timer_init, -}; - -MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = eukrea_cpuimx27_init, - .timer = &eukrea_cpuimx27_timer, +MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") + .atag_offset = 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .init_time = eukrea_cpuimx27_timer_init, + .init_machine = eukrea_cpuimx27_init, + .restart = mxc_restart, MACHINE_END |