diff options
Diffstat (limited to 'arch/arm/mach-imx/mach-armadillo5x0.c')
| -rw-r--r-- | arch/arm/mach-imx/mach-armadillo5x0.c | 49 |
1 files changed, 26 insertions, 23 deletions
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index e4f426a0989..39406b7e322 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -38,20 +38,21 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <linux/delay.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/ulpi.h> - +#include "common.h" #include "devices-imx31.h" -#include "crmregs-imx31.h" +#include "crmregs-imx3.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" static int armadillo5x0_pins[] = { /* UART1 */ @@ -365,10 +366,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "CRT-VGA", .mode = fb_modedb, @@ -406,8 +403,8 @@ static int armadillo5x0_sdhc1_init(struct device *dev, gpio_direction_input(gpio_wp); /* When supported the trigger type have to be BOTH */ - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), + detect_irq, IRQF_TRIGGER_FALLING, "sdhc-detect", data); if (ret) @@ -427,7 +424,7 @@ err_gpio_free: static void armadillo5x0_sdhc1_exit(struct device *dev, void *data) { - free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), data); gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)); gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); } @@ -448,8 +445,7 @@ static struct resource armadillo5x0_smc911x_resources[] = { .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -479,6 +475,11 @@ static struct platform_device *devices[] __initdata = { &armadillo5x0_smc911x_device, }; +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + /* * Perform board specific initializations */ @@ -489,6 +490,12 @@ static void __init armadillo5x0_init(void) mxc_iomux_setup_multiple_pins(armadillo5x0_pins, ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + + armadillo5x0_smc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + armadillo5x0_smc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); platform_add_devices(devices, ARRAY_SIZE(devices)); imx_add_gpio_keys(&armadillo5x0_button_data); imx31_add_imx_i2c1(NULL); @@ -504,7 +511,7 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_mmc(0, &sdhc_pdata); /* Register FB */ - imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* Register NOR Flash */ @@ -517,7 +524,8 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_nand(&armadillo5x0_nand_board_info); /* set NAND page size to 2k if not configured via boot mode pins */ - __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); + __raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) | + (1 << 30), mx3_ccm_base + MXC_CCM_RCSR); /* RTC */ /* Get RTC IRQ and register the chip */ @@ -548,18 +556,13 @@ static void __init armadillo5x0_timer_init(void) mx31_clocks_init(26000000); } -static struct sys_timer armadillo5x0_timer = { - .init = armadillo5x0_timer_init, -}; - MACHINE_START(ARMADILLO5X0, "Armadillo-500") /* Maintainer: Alberto Panizzo */ .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, - .timer = &armadillo5x0_timer, + .init_time = armadillo5x0_timer_init, .init_machine = armadillo5x0_init, .restart = mxc_restart, MACHINE_END |