1 files changed, 25 insertions, 66 deletions

diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 026263c665c..b2f08bfbbdd 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -26,20 +26,13 @@
 #include <linux/spi/ads7846.h>
 #include <linux/backlight.h>
 #include <video/platform_lcd.h>
-#include <linux/input/matrix_keypad.h>
 
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/imxfb.h>
-#include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/spi.h>
-#include <mach/audmux.h>
-
+#include "common.h"
 #include "devices-imx27.h"
-#include "devices.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
 
 static const int eukrea_mbimx27_pins[] __initconst = {
 	/* UART2 */
@@ -53,7 +46,7 @@ static const int eukrea_mbimx27_pins[] __initconst = {
 	PE10_PF_UART3_CTS,
 	PE11_PF_UART3_RTS,
 	/* UART4 */
-#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
+#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
 	PB26_AF_UART4_RTS,
 	PB28_AF_UART4_TXD,
 	PB29_AF_UART4_CTS,
@@ -111,12 +104,13 @@ static const uint32_t eukrea_mbimx27_keymap[] = {
 	KEY(1, 1, KEY_LEFT),
 };
 
-static struct matrix_keymap_data eukrea_mbimx27_keymap_data = {
+static const struct matrix_keymap_data
+eukrea_mbimx27_keymap_data __initconst = {
 	.keymap         = eukrea_mbimx27_keymap,
 	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
 };
 
-static struct gpio_led gpio_leds[] = {
+static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
 	{
 		.name			= "led1",
 		.default_trigger	= "heartbeat",
@@ -131,17 +125,10 @@ static struct gpio_led gpio_leds[] = {
 	},
 };
 
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
+static const struct gpio_led_platform_data
+		eukrea_mbimx27_gpio_led_info __initconst = {
+	.leds		= eukrea_mbimx27_gpio_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
 };
 
 static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
@@ -196,7 +183,7 @@ static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
 	.mode = eukrea_mbimx27_modes,
 	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
 
@@ -250,15 +237,12 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
 #define ADS7846_PENDOWN (GPIO_PORTD | 25)
 
-static void ads7846_dev_init(void)
+static void __maybe_unused ads7846_dev_init(void)
 {
 	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
-		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
 		return;
 	}
 	gpio_direction_input(ADS7846_PENDOWN);
@@ -273,16 +257,15 @@ static struct ads7846_platform_data ads7846_config __initdata = {
 	.get_pendown_state	= ads7846_get_pendown_state,
 	.keep_vref_on		= 1,
 };
-#endif
 
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+static struct spi_board_info __maybe_unused
+		eukrea_mbimx27_spi_board_info[] __initdata = {
 	[0] = {
 		.modalias	= "ads7846",
 		.bus_num	= 0,
 		.chip_select	= 0,
 		.max_speed_hz	= 1500000,
-		.irq		= IRQ_GPIOD(25),
+		/* irq number is run-time assigned */
 		.platform_data	= &ads7846_config,
 		.mode           = SPI_MODE_2,
 	},
@@ -294,7 +277,6 @@ static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
 	.chipselect	= eukrea_mbimx27_spi_cs,
 	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
 };
-#endif
 
 static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
 	{
@@ -302,11 +284,7 @@ static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
 	},
 };
 
-static struct platform_device *platform_devices[] __initdata = {
-	&leds_gpio,
-};
-
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.dat3_card_detect = 1,
 };
 
@@ -326,33 +304,14 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
 		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
 
-#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
-	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
-	/* SSI unit master I2S codec connected to SSI_PINS_4*/
-	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
-			MXC_AUDMUX_V1_PCR_SYN |
-			MXC_AUDMUX_V1_PCR_TFSDIR |
-			MXC_AUDMUX_V1_PCR_TCLKDIR |
-			MXC_AUDMUX_V1_PCR_RFSDIR |
-			MXC_AUDMUX_V1_PCR_RCLKDIR |
-			MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
-			MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
-			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4)
-	);
-	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4,
-			MXC_AUDMUX_V1_PCR_SYN |
-			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
-	);
-#endif
-
 	imx27_add_imx_uart1(&uart_pdata);
 	imx27_add_imx_uart2(&uart_pdata);
-#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
+#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
 	imx27_add_imx_uart3(&uart_pdata);
 #endif
 
-	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+	imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
+	imx27_add_mxc_mmc(0, &sdhc_pdata);
 
 	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
@@ -366,13 +325,12 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	ads7846_dev_init();
 #endif
 
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 	/* SPI_CS0 init */
 	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
 	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
+	eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
 	spi_register_board_info(eukrea_mbimx27_spi_board_info,
 			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
-#endif
 
 	/* Leds configuration */
 	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
@@ -386,7 +344,8 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	gpio_request(GPIO_PORTA | 25, "lcd_enable");
 	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
 
-	mxc_register_device(&imx_kpp_device, &eukrea_mbimx27_keymap_data);
+	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
 
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
+	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
 }