diff options
Diffstat (limited to 'arch/arm/mach-imx/eukrea_mbimx27-baseboard.c')
| -rw-r--r-- | arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 68 |
1 files changed, 18 insertions, 50 deletions
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 275c8589d79..b2f08bfbbdd 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -29,13 +29,10 @@ #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/iomux-mx27.h> -#include <mach/hardware.h> -#include <mach/spi.h> -#include <mach/audmux.h> - +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" static const int eukrea_mbimx27_pins[] __initconst = { /* UART2 */ @@ -49,7 +46,7 @@ static const int eukrea_mbimx27_pins[] __initconst = { PE10_PF_UART3_CTS, PE11_PF_UART3_RTS, /* UART4 */ -#if !defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) PB26_AF_UART4_RTS, PB28_AF_UART4_TXD, PB29_AF_UART4_CTS, @@ -113,7 +110,7 @@ eukrea_mbimx27_keymap_data __initconst = { .keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap), }; -static struct gpio_led gpio_leds[] = { +static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = { { .name = "led1", .default_trigger = "heartbeat", @@ -128,17 +125,10 @@ static struct gpio_led gpio_leds[] = { }, }; -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, +static const struct gpio_led_platform_data + eukrea_mbimx27_gpio_led_info __initconst = { + .leds = eukrea_mbimx27_gpio_leds, + .num_leds = ARRAY_SIZE(eukrea_mbimx27_gpio_leds), }; static struct imx_fb_videomode eukrea_mbimx27_modes[] = { @@ -249,10 +239,10 @@ static const struct imxuart_platform_data uart_pdata __initconst = { #define ADS7846_PENDOWN (GPIO_PORTD | 25) -static void ads7846_dev_init(void) +static void __maybe_unused ads7846_dev_init(void) { if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) { - printk(KERN_ERR "can't get ads746 pen down GPIO\n"); + printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); return; } gpio_direction_input(ADS7846_PENDOWN); @@ -268,13 +258,14 @@ static struct ads7846_platform_data ads7846_config __initdata = { .keep_vref_on = 1, }; -static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = { +static struct spi_board_info __maybe_unused + eukrea_mbimx27_spi_board_info[] __initdata = { [0] = { .modalias = "ads7846", .bus_num = 0, .chip_select = 0, .max_speed_hz = 1500000, - .irq = IRQ_GPIOD(25), + /* irq number is run-time assigned */ .platform_data = &ads7846_config, .mode = SPI_MODE_2, }, @@ -293,10 +284,6 @@ static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = { }, }; -static struct platform_device *platform_devices[] __initdata = { - &leds_gpio, -}; - static const struct imxmmc_platform_data sdhc_pdata __initconst = { .dat3_card_detect = 1, }; @@ -317,28 +304,9 @@ void __init eukrea_mbimx27_baseboard_init(void) mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins, ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27"); -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \ - || defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE) - /* SSI unit master I2S codec connected to SSI_PINS_4*/ - mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, - MXC_AUDMUX_V1_PCR_SYN | - MXC_AUDMUX_V1_PCR_TFSDIR | - MXC_AUDMUX_V1_PCR_TCLKDIR | - MXC_AUDMUX_V1_PCR_RFSDIR | - MXC_AUDMUX_V1_PCR_RCLKDIR | - MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | - MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | - MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) - ); - mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4, - MXC_AUDMUX_V1_PCR_SYN | - MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0) - ); -#endif - imx27_add_imx_uart1(&uart_pdata); imx27_add_imx_uart2(&uart_pdata); -#if !defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) imx27_add_imx_uart3(&uart_pdata); #endif @@ -357,13 +325,12 @@ void __init eukrea_mbimx27_baseboard_init(void) ads7846_dev_init(); #endif -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) /* SPI_CS0 init */ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data); + eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25)); spi_register_board_info(eukrea_mbimx27_spi_board_info, ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); -#endif /* Leds configuration */ mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT); @@ -379,5 +346,6 @@ void __init eukrea_mbimx27_baseboard_init(void) imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info); + imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); } |