diff options
Diffstat (limited to 'arch/arm/mach-imx/Kconfig')
| -rw-r--r-- | arch/arm/mach-imx/Kconfig | 141 |
1 files changed, 37 insertions, 104 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 33567aa5880..4b5185748f7 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,24 +1,18 @@ -config ARCH_MXC +menuconfig ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 + select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM - select ARM_PATCH_PHYS_VIRT select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_ALLOCATOR - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 - select MULTI_IRQ_HANDLER select PINCTRL + select PM_OPP if PM select SOC_BUS - select SPARSE_IRQ - select USE_OF + select SRAM help Support for Freescale MXC/iMX-based family of processors -menu "Freescale i.MX support" - depends on ARCH_MXC +if ARCH_MXC config MXC_TZIC bool @@ -103,7 +97,6 @@ config SOC_IMX25 config SOC_IMX27 bool - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select CPU_ARM926T select IMX_HAVE_IOMUX_V1 @@ -121,18 +114,15 @@ config SOC_IMX31 config SOC_IMX35 bool select ARCH_MXC_IOMUX_V3 - select CPU_V6K select HAVE_EPIT select MXC_AVIC + select PINCTRL_IMX35 select SMP_ON_UP if SMP - select PINCTRL config SOC_IMX5 bool - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 - select CPU_V7 select MXC_TZIC config SOC_IMX51 @@ -708,61 +698,6 @@ endif if ARCH_MULTI_V7 -comment "i.MX51 machines:" - -config MACH_IMX51_DT - bool "Support i.MX51 platforms from device tree" - select SOC_IMX51 - help - Include support for Freescale i.MX51 based platforms - using the device tree for discovery - -config MACH_MX51_BABBAGE - bool "Support MX51 BABBAGE platforms" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select SOC_IMX51 - help - Include support for MX51 Babbage platform, also known as MX51EVK in - u-boot. This includes specific configurations for the board and its - peripherals. - -config MACH_EUKREA_CPUIMX51SD - bool "Support Eukrea CPUIMX51SD module" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - select SOC_IMX51 - help - Include support for Eukrea CPUIMX51SD platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51SD - default MACH_EUKREA_MBIMXSD51_BASEBOARD - -config MACH_EUKREA_MBIMXSD51_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - comment "Device tree only" config SOC_IMX50 @@ -774,73 +709,71 @@ config SOC_IMX50 help This enables support for Freescale i.MX50 processor. +config MACH_IMX51_DT + bool "i.MX51 support" + select SOC_IMX51 + help + This enables support for Freescale i.MX51 processor + config SOC_IMX53 bool "i.MX53 support" select HAVE_IMX_SRC - select IMX_HAVE_PLATFORM_IMX2_WDT select PINCTRL_IMX53 select SOC_IMX5 help This enables support for Freescale i.MX53 processor. -config SOC_IMX6Q - bool "i.MX6 Quad/DualLite support" - select ARCH_HAS_CPUFREQ - select ARCH_HAS_OPP +config SOC_IMX6 + bool select ARM_ERRATA_754322 - select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 select ARM_GIC - select CPU_V7 - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP select HAVE_IMX_ANATOP select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC - select HAVE_SMP select MFD_SYSCON - select MIGHT_HAVE_PCI + select PL310_ERRATA_588369 if CACHE_L2X0 + select PL310_ERRATA_727915 if CACHE_L2X0 + select PL310_ERRATA_769419 if CACHE_L2X0 + +config SOC_IMX6Q + bool "i.MX6 Quad/DualLite support" + select ARM_ERRATA_764369 if SMP + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP select PCI_DOMAINS if PCI select PINCTRL_IMX6Q - select PL310_ERRATA_588369 if CACHE_PL310 - select PL310_ERRATA_727915 if CACHE_PL310 - select PL310_ERRATA_769419 if CACHE_PL310 - select PM_OPP if PM + select SOC_IMX6 help This enables support for Freescale i.MX6 Quad processor. config SOC_IMX6SL bool "i.MX6 SoloLite support" - select ARM_ERRATA_754322 - select ARM_ERRATA_775420 - select ARM_GIC - select CPU_V7 - select HAVE_IMX_ANATOP - select HAVE_IMX_GPC - select HAVE_IMX_MMDC - select HAVE_IMX_SRC - select MFD_SYSCON select PINCTRL_IMX6SL - select PL310_ERRATA_588369 if CACHE_PL310 - select PL310_ERRATA_727915 if CACHE_PL310 - select PL310_ERRATA_769419 if CACHE_PL310 + select SOC_IMX6 help This enables support for Freescale i.MX6 SoloLite processor. +config SOC_IMX6SX + bool "i.MX6 SoloX support" + select PINCTRL_IMX6SX + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 SoloX processor. + config SOC_VF610 bool "Vybrid Family VF610 support" - select CPU_V7 select ARM_GIC - select CLKSRC_OF select PINCTRL_VF610 select VF_PIT_TIMER - select PL310_ERRATA_588369 if CACHE_PL310 - select PL310_ERRATA_727915 if CACHE_PL310 - select PL310_ERRATA_769419 if CACHE_PL310 + select PL310_ERRATA_588369 if CACHE_L2X0 + select PL310_ERRATA_727915 if CACHE_L2X0 + select PL310_ERRATA_769419 if CACHE_L2X0 help This enable support for Freescale Vybrid VF610 processor. @@ -849,4 +782,4 @@ endif source "arch/arm/mach-imx/devices/Kconfig" -endmenu +endif |