diff options
Diffstat (limited to 'arch/arm/mach-footbridge')
| -rw-r--r-- | arch/arm/mach-footbridge/Kconfig | 4 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/Makefile | 7 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/cats-hw.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/common.c | 24 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/common.h | 9 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/dc21285-timer.c | 52 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/dc21285.c | 26 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/ebsa285-leds.c | 138 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/ebsa285.c | 99 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/include/mach/debug-macro.S | 14 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/include/mach/hardware.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/include/mach/io.h | 12 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/include/mach/irqs.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/include/mach/timex.h | 18 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/include/mach/uncompress.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/isa-timer.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/netwinder-hw.c | 120 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/netwinder-leds.c | 138 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/personal.c | 2 |
19 files changed, 279 insertions, 409 deletions
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index f643ef819da..07152d00fc5 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -52,6 +52,7 @@ config ARCH_EBSA285_HOST select FOOTBRIDGE_HOST select ISA select ISA_DMA + select ARCH_MAY_HAVE_PC_FDC select PCI help Say Y here if you intend to run this kernel on the EBSA285 card @@ -67,6 +68,7 @@ config ARCH_NETWINDER select ISA select ISA_DMA select PCI + select VIRT_TO_BUS help Say Y here if you intend to run this kernel on the Rebel.COM NetWinder. Information about this machine can be found at: @@ -84,6 +86,7 @@ config FOOTBRIDGE # Footbridge in host mode config FOOTBRIDGE_HOST bool + select ARCH_MIGHT_HAVE_PC_SERIO # Footbridge in addin mode config FOOTBRIDGE_ADDIN @@ -91,7 +94,6 @@ config FOOTBRIDGE_ADDIN # EBSA285 board in either host or addin mode config ARCH_EBSA285 - select ARCH_MAY_HAVE_PC_FDC bool endif diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index 3afb1b25946..c3faa3bc84d 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -4,25 +4,22 @@ # Object file lists. -obj-y := common.o dc21285.o dma.o isa-irq.o +obj-y := common.o dma.o isa-irq.o obj-m := obj-n := obj- := +pci-y += dc21285.o pci-$(CONFIG_ARCH_CATS) += cats-pci.o pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o -leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o -leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o - obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o obj-$(CONFIG_PCI) +=$(pci-y) -obj-$(CONFIG_LEDS) +=$(leds-y) obj-$(CONFIG_ISA) += isa.o isa-rtc.o diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index 25b453601ac..8f05489671b 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -76,20 +76,22 @@ __initcall(cats_hw_init); * hard reboots fail on early boards. */ static void __init -fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi) +fixup_cats(struct tag *tags, char **cmdline) { +#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) screen_info.orig_video_lines = 25; screen_info.orig_video_points = 16; screen_info.orig_y = 24; +#endif } MACHINE_START(CATS, "Chalice-CATS") /* Maintainer: Philip Blundell */ .atag_offset = 0x100, - .restart_mode = 's', + .reboot_mode = REBOOT_SOFT, .fixup = fixup_cats, .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, - .timer = &isa_timer, + .init_time = isa_timer_init, .restart = footbridge_restart, MACHINE_END diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 3e6aaa6361d..9e8220e3839 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -15,7 +15,8 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/spinlock.h> - +#include <video/vga.h> + #include <asm/pgtable.h> #include <asm/page.h> #include <asm/irq.h> @@ -26,6 +27,7 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> +#include <asm/mach/pci.h> #include "common.h" @@ -141,11 +143,6 @@ static struct map_desc fb_common_io_desc[] __initdata = { .pfn = __phys_to_pfn(DC21285_ARMCSR_BASE), .length = ARMCSR_SIZE, .type = MT_DEVICE, - }, { - .virtual = XBUS_BASE, - .pfn = __phys_to_pfn(0x40000000), - .length = XBUS_SIZE, - .type = MT_DEVICE, } }; @@ -175,11 +172,6 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = { .pfn = __phys_to_pfn(DC21285_PCI_IACK), .length = PCIIACK_SIZE, .type = MT_DEVICE, - }, { - .virtual = PCIO_BASE, - .pfn = __phys_to_pfn(DC21285_PCI_IO), - .length = PCIO_SIZE, - .type = MT_DEVICE, }, #endif }; @@ -196,13 +188,17 @@ void __init footbridge_map_io(void) * Now, work out what we've got to map in addition on this * platform. */ - if (footbridge_cfn_mode()) + if (footbridge_cfn_mode()) { iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); + pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO)); + } + + vga_base = PCIMEM_BASE; } -void footbridge_restart(char mode, const char *cmd) +void footbridge_restart(enum reboot_mode mode, const char *cmd) { - if (mode == 's') { + if (mode == REBOOT_SOFT) { /* Jump into the ROM */ soft_restart(0x41000000); } else { diff --git a/arch/arm/mach-footbridge/common.h b/arch/arm/mach-footbridge/common.h index c9767b892cb..b911e5587ec 100644 --- a/arch/arm/mach-footbridge/common.h +++ b/arch/arm/mach-footbridge/common.h @@ -1,6 +1,7 @@ +#include <linux/reboot.h> -extern struct sys_timer footbridge_timer; -extern struct sys_timer isa_timer; +extern void footbridge_timer_init(void); +extern void isa_timer_init(void); extern void isa_rtc_init(void); @@ -8,4 +9,6 @@ extern void footbridge_map_io(void); extern void footbridge_init_irq(void); extern void isa_init_irq(unsigned int irq); -extern void footbridge_restart(char, const char *); +extern void footbridge_restart(enum reboot_mode, const char *); + +extern void footbridge_sched_clock(void); diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index 3b54196447c..bf7aa7d298e 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -9,6 +9,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/sched_clock.h> #include <asm/irq.h> @@ -46,6 +47,16 @@ static struct clocksource cksrc_dc21285 = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static int ckevt_dc21285_set_next_event(unsigned long delta, + struct clock_event_device *c) +{ + *CSR_TIMER1_CLR = 0; + *CSR_TIMER1_LOAD = delta; + *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16; + + return 0; +} + static void ckevt_dc21285_set_mode(enum clock_event_mode mode, struct clock_event_device *c) { @@ -58,7 +69,9 @@ static void ckevt_dc21285_set_mode(enum clock_event_mode mode, TIMER_CNTL_DIV16; break; - default: + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: *CSR_TIMER1_CNTL = 0; break; } @@ -66,9 +79,11 @@ static void ckevt_dc21285_set_mode(enum clock_event_mode mode, static struct clock_event_device ckevt_dc21285 = { .name = "dc21285_timer1", - .features = CLOCK_EVT_FEAT_PERIODIC, + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, .rating = 200, .irq = IRQ_TIMER1, + .set_next_event = ckevt_dc21285_set_next_event, .set_mode = ckevt_dc21285_set_mode, }; @@ -78,6 +93,10 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id) *CSR_TIMER1_CLR = 0; + /* Stop the timer if in one-shot mode */ + if (ce->mode == CLOCK_EVT_MODE_ONESHOT) + *CSR_TIMER1_CNTL = 0; + ce->event_handler(ce); return IRQ_HANDLED; @@ -86,29 +105,38 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id) static struct irqaction footbridge_timer_irq = { .name = "dc21285_timer1", .handler = timer1_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .dev_id = &ckevt_dc21285, }; /* * Set up timer interrupt. */ -static void __init footbridge_timer_init(void) +void __init footbridge_timer_init(void) { struct clock_event_device *ce = &ckevt_dc21285; + unsigned rate = DIV_ROUND_CLOSEST(mem_fclk_21285, 16); - clocksource_register_hz(&cksrc_dc21285, (mem_fclk_21285 + 8) / 16); + clocksource_register_hz(&cksrc_dc21285, rate); setup_irq(ce->irq, &footbridge_timer_irq); - clockevents_calc_mult_shift(ce, mem_fclk_21285, 5); - ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce); - ce->min_delta_ns = clockevent_delta2ns(0x000004, ce); ce->cpumask = cpumask_of(smp_processor_id()); + clockevents_config_and_register(ce, rate, 0x4, 0xffffff); +} - clockevents_register_device(ce); +static u64 notrace footbridge_read_sched_clock(void) +{ + return ~*CSR_TIMER3_VALUE; } -struct sys_timer footbridge_timer = { - .init = footbridge_timer_init, -}; +void __init footbridge_sched_clock(void) +{ + unsigned rate = DIV_ROUND_CLOSEST(mem_fclk_21285, 16); + + *CSR_TIMER3_LOAD = 0; + *CSR_TIMER3_CLR = 0; + *CSR_TIMER3_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16; + + sched_clock_register(footbridge_read_sched_clock, 24, rate); +} diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 9d62e338102..96a3d73ef4b 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -18,7 +18,6 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/spinlock.h> -#include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> @@ -276,8 +275,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) sys->mem_offset = DC21285_PCI_MEM; - pci_add_resource_offset(&sys->resources, - &ioport_resource, sys->io_offset); pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset); pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); @@ -293,12 +290,11 @@ void __init dc21285_preinit(void) int cfn_mode; pcibios_min_mem = 0x81000000; - vga_base = PCIMEM_BASE; mem_size = (unsigned int)high_memory - PAGE_OFFSET; for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1) if (mem_mask >= mem_size) - break; + break; /* * These registers need to be set up whether we're the @@ -338,26 +334,18 @@ void __init dc21285_preinit(void) /* * We don't care if these fail. */ - dc21285_request_irq(IRQ_PCI_SERR, dc21285_serr_irq, IRQF_DISABLED, + dc21285_request_irq(IRQ_PCI_SERR, dc21285_serr_irq, 0, "PCI system error", &serr_timer); - dc21285_request_irq(IRQ_PCI_PERR, dc21285_parity_irq, IRQF_DISABLED, + dc21285_request_irq(IRQ_PCI_PERR, dc21285_parity_irq, 0, "PCI parity error", &perr_timer); - dc21285_request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, IRQF_DISABLED, + dc21285_request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, 0, "PCI abort", NULL); - dc21285_request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, IRQF_DISABLED, + dc21285_request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, 0, "Discard timer", NULL); - dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, IRQF_DISABLED, + dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, 0, "PCI data parity", NULL); if (cfn_mode) { - static struct resource csrio; - - csrio.flags = IORESOURCE_IO; - csrio.name = "Footbridge"; - - allocate_resource(&ioport_resource, &csrio, 128, - 0xff00, 0xffff, 128, NULL, NULL); - /* * Map our SDRAM at a known address in PCI space, just in case * the firmware had other ideas. Using a nonzero base is @@ -365,7 +353,7 @@ void __init dc21285_preinit(void) * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards). */ *CSR_PCICSRBASE = 0xf4000000; - *CSR_PCICSRIOBASE = csrio.start; + *CSR_PCICSRIOBASE = 0; *CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET); *CSR_PCIROMBASE = 0; *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c deleted file mode 100644 index 5bd266754b9..00000000000 --- a/arch/arm/mach-footbridge/ebsa285-leds.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * linux/arch/arm/mach-footbridge/ebsa285-leds.c - * - * Copyright (C) 1998-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * EBSA-285 control routines. - * - * The EBSA-285 uses the leds as follows: - * - Green - toggles state every 50 timer interrupts - * - Amber - On if system is not idle - * - Red - currently unused - * - * Changelog: - * 02-05-1999 RMK Various cleanups - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> - -#include <mach/hardware.h> -#include <asm/leds.h> -#include <asm/mach-types.h> - -#define LED_STATE_ENABLED 1 -#define LED_STATE_CLAIMED 2 -static char led_state; -static char hw_led_state; - -static DEFINE_SPINLOCK(leds_lock); - -static void ebsa285_leds_event(led_event_t evt) -{ - unsigned long flags; - - spin_lock_irqsave(&leds_lock, flags); - - switch (evt) { - case led_start: - hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN; -#ifndef CONFIG_LEDS_CPU - hw_led_state |= XBUS_LED_AMBER; -#endif - led_state |= LED_STATE_ENABLED; - break; - - case led_stop: - led_state &= ~LED_STATE_ENABLED; - break; - - case led_claim: - led_state |= LED_STATE_CLAIMED; - hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER; - break; - - case led_release: - led_state &= ~LED_STATE_CLAIMED; - hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER; - break; - -#ifdef CONFIG_LEDS_TIMER - case led_timer: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state ^= XBUS_LED_GREEN; - break; -#endif - -#ifdef CONFIG_LEDS_CPU - case led_idle_start: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state |= XBUS_LED_AMBER; - break; - - case led_idle_end: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state &= ~XBUS_LED_AMBER; - break; -#endif - - case led_halted: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state &= ~XBUS_LED_RED; - break; - - case led_green_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~XBUS_LED_GREEN; - break; - - case led_green_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= XBUS_LED_GREEN; - break; - - case led_amber_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~XBUS_LED_AMBER; - break; - - case led_amber_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= XBUS_LED_AMBER; - break; - - case led_red_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~XBUS_LED_RED; - break; - - case led_red_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= XBUS_LED_RED; - break; - - default: - break; - } - - if (led_state & LED_STATE_ENABLED) - *XBUS_LEDS = hw_led_state; - - spin_unlock_irqrestore(&leds_lock, flags); -} - -static int __init leds_init(void) -{ - if (machine_is_ebsa285()) - leds_event = ebsa285_leds_event; - - leds_event(led_start); - - return 0; -} - -__initcall(leds_init); diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index 27716a7e5fc..aee8300f349 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -4,7 +4,10 @@ * EBSA285 machine fixup */ #include <linux/init.h> +#include <linux/io.h> #include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/leds.h> #include <asm/hardware/dec21285.h> #include <asm/mach-types.h> @@ -13,14 +16,108 @@ #include "common.h" +/* LEDs */ +#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) +#define XBUS_AMBER_L BIT(0) +#define XBUS_GREEN_L BIT(1) +#define XBUS_RED_L BIT(2) +#define XBUS_TOGGLE BIT(7) + +struct ebsa285_led { + struct led_classdev cdev; + u8 mask; +}; + +/* + * The triggers lines up below will only be used if the + * LED triggers are compiled in. + */ +static const struct { + const char *name; + const char *trigger; +} ebsa285_leds[] = { + { "ebsa285:amber", "cpu0", }, + { "ebsa285:green", "heartbeat", }, + { "ebsa285:red",}, +}; + +static unsigned char hw_led_state; +static void __iomem *xbus; + +static void ebsa285_led_set(struct led_classdev *cdev, + enum led_brightness b) +{ + struct ebsa285_led *led = container_of(cdev, + struct ebsa285_led, cdev); + + if (b == LED_OFF) + hw_led_state |= led->mask; + else + hw_led_state &= ~led->mask; + writeb(hw_led_state, xbus); +} + +static enum led_brightness ebsa285_led_get(struct led_classdev *cdev) +{ + struct ebsa285_led *led = container_of(cdev, + struct ebsa285_led, cdev); + + return hw_led_state & led->mask ? LED_OFF : LED_FULL; +} + +static int __init ebsa285_leds_init(void) +{ + int i; + + if (!machine_is_ebsa285()) + return -ENODEV; + + xbus = ioremap(XBUS_CS2, SZ_4K); + if (!xbus) + return -ENOMEM; + + /* 3 LEDS all off */ + hw_led_state = XBUS_AMBER_L | XBUS_GREEN_L | XBUS_RED_L; + writeb(hw_led_state, xbus); + + for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) { + struct ebsa285_led *led; + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (!led) + break; + + led->cdev.name = ebsa285_leds[i].name; + led->cdev.brightness_set = ebsa285_led_set; + led->cdev.brightness_get = ebsa285_led_get; + led->cdev.default_trigger = ebsa285_leds[i].trigger; + led->mask = BIT(i); + + if (led_classdev_register(NULL, &led->cdev) < 0) { + kfree(led); + break; + } + } + + return 0; +} + +/* + * Since we may have triggers on any subsystem, defer registration + * until after subsystem_init. + */ +fs_initcall(ebsa285_leds_init); +#endif + MACHINE_START(EBSA285, "EBSA285") /* Maintainer: Russell King */ .atag_offset = 0x100, .video_start = 0x000a0000, .video_end = 0x000bffff, .map_io = footbridge_map_io, + .init_early = footbridge_sched_clock, .init_irq = footbridge_init_irq, - .timer = &footbridge_timer, + .init_time = footbridge_timer_init, .restart = footbridge_restart, MACHINE_END diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index e5acde25ffc..02247f313e9 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -13,19 +13,6 @@ #include <asm/hardware/dec21285.h> -#ifndef CONFIG_DEBUG_DC21285_PORT - /* For NetWinder debugging */ - .macro addruart, rp, rv, tmp - mov \rp, #0x000003f8 - orr \rv, \rp, #0xff000000 @ virtual - orr \rp, \rp, #0x7c000000 @ physical - .endm - -#define UART_SHIFT 0 -#define FLOW_CONTROL -#include <asm/hardware/debug-8250.S> - -#else #include <mach/hardware.h> /* For EBSA285 debugging */ .equ dc21285_high, ARMCSR_BASE & 0xff000000 @@ -53,4 +40,3 @@ .macro waituart,rd,rx .endm -#endif diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h index e3d6ccac216..02f6d7a706b 100644 --- a/arch/arm/mach-footbridge/include/mach/hardware.h +++ b/arch/arm/mach-footbridge/include/mach/hardware.h @@ -51,11 +51,7 @@ #define PCIMEM_SIZE 0x01000000 #define PCIMEM_BASE MMU_IO(0xf0000000, 0x80000000) -#define XBUS_LEDS ((volatile unsigned char *)(XBUS_BASE + 0x12000)) -#define XBUS_LED_AMBER (1 << 0) -#define XBUS_LED_GREEN (1 << 1) -#define XBUS_LED_RED (1 << 2) -#define XBUS_LED_TOGGLE (1 << 8) +#define XBUS_CS2 0x40012000 #define XBUS_SWITCH ((volatile unsigned char *)(XBUS_BASE + 0x12000)) #define XBUS_SWITCH_SWITCH ((*XBUS_SWITCH) & 15) diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h index aba531eebbc..aba46388cc0 100644 --- a/arch/arm/mach-footbridge/include/mach/io.h +++ b/arch/arm/mach-footbridge/include/mach/io.h @@ -14,18 +14,10 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#ifdef CONFIG_MMU -#define MMU_IO(a, b) (a) -#else -#define MMU_IO(a, b) (b) -#endif - -#define PCIO_SIZE 0x00100000 -#define PCIO_BASE MMU_IO(0xff000000, 0x7c000000) - /* - * Translation of various region addresses to virtual addresses + * Translation of various i/o addresses to host addresses for !CONFIG_MMU */ +#define PCIO_BASE 0x7c000000 #define __io(a) ((void __iomem *)(PCIO_BASE + (a))) #endif diff --git a/arch/arm/mach-footbridge/include/mach/irqs.h b/arch/arm/mach-footbridge/include/mach/irqs.h index 400551e43e4..61c714c4920 100644 --- a/arch/arm/mach-footbridge/include/mach/irqs.h +++ b/arch/arm/mach-footbridge/include/mach/irqs.h @@ -89,8 +89,6 @@ #define IRQ_NETWINDER_VGA _ISA_IRQ(11) #define IRQ_NETWINDER_SOUND _ISA_IRQ(12) -#undef RTC_IRQ -#define RTC_IRQ IRQ_ISA_RTC_ALARM #define I8042_KBD_IRQ IRQ_ISA_KEYBOARD #define I8042_AUX_IRQ (machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE) #define IRQ_FLOPPYDISK IRQ_ISA_FLOPPY diff --git a/arch/arm/mach-footbridge/include/mach/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h deleted file mode 100644 index d0fea9d6d4a..00000000000 --- a/arch/arm/mach-footbridge/include/mach/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/mach-footbridge/include/mach/timex.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA285 architecture timex specifications - */ - -/* - * We assume a constant here; this satisfies the maths in linux/timex.h - * and linux/time.h. CLOCK_TICK_RATE is actually system dependent, but - * this must be a constant. - */ -#define CLOCK_TICK_RATE (50000000/16) diff --git a/arch/arm/mach-footbridge/include/mach/uncompress.h b/arch/arm/mach-footbridge/include/mach/uncompress.h index 5dfa4428734..a69398c05a5 100644 --- a/arch/arm/mach-footbridge/include/mach/uncompress.h +++ b/arch/arm/mach-footbridge/include/mach/uncompress.h @@ -35,4 +35,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c index c40bb415f4b..b73f52e196b 100644 --- a/arch/arm/mach-footbridge/isa-timer.c +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -27,18 +27,14 @@ static irqreturn_t pit_timer_interrupt(int irq, void *dev_id) static struct irqaction pit_timer_irq = { .name = "pit", .handler = pit_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .dev_id = &i8253_clockevent, }; -static void __init isa_timer_init(void) +void __init isa_timer_init(void) { clocksource_i8253_init(); setup_irq(i8253_clockevent.irq, &pit_timer_irq); clockevent_i8253_init(false); } - -struct sys_timer isa_timer = { - .init = isa_timer_init, -}; diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index cac9f67e7da..cdee08c6d23 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -12,9 +12,10 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/leds.h> #include <asm/hardware/dec21285.h> -#include <asm/leds.h> #include <asm/mach-types.h> #include <asm/setup.h> #include <asm/system_misc.h> @@ -27,13 +28,6 @@ #define GP1_IO_BASE 0x338 #define GP2_IO_BASE 0x33a - -#ifdef CONFIG_LEDS -#define DEFAULT_LEDS 0 -#else -#define DEFAULT_LEDS GPIO_GREEN_LED -#endif - /* * Winbond WB83977F accessibility stuff */ @@ -611,15 +605,9 @@ static void __init rwa010_init(void) static int __init nw_hw_init(void) { if (machine_is_netwinder()) { - unsigned long flags; - wb977_init(); cpld_init(); rwa010_init(); - - raw_spin_lock_irqsave(&nw_gpio_lock, flags); - nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS); - raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } return 0; } @@ -632,7 +620,7 @@ __initcall(nw_hw_init); * the parameter page. */ static void __init -fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi) +fixup_netwinder(struct tag *tags, char **cmdline) { #ifdef CONFIG_ISAPNP extern int isapnp_disable; @@ -646,9 +634,9 @@ fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi) #endif } -static void netwinder_restart(char mode, const char *cmd) +static void netwinder_restart(enum reboot_mode mode, const char *cmd) { - if (mode == 's') { + if (mode == REBOOT_SOFT) { /* Jump into the ROM */ soft_restart(0x41000000); } else { @@ -672,6 +660,102 @@ static void netwinder_restart(char mode, const char *cmd) } } +/* LEDs */ +#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) +struct netwinder_led { + struct led_classdev cdev; + u8 mask; +}; + +/* + * The triggers lines up below will only be used if the + * LED triggers are compiled in. + */ +static const struct { + const char *name; + const char *trigger; +} netwinder_leds[] = { + { "netwinder:green", "heartbeat", }, + { "netwinder:red", "cpu0", }, +}; + +/* + * The LED control in Netwinder is reversed: + * - setting bit means turn off LED + * - clearing bit means turn on LED + */ +static void netwinder_led_set(struct led_classdev *cdev, + enum led_brightness b) +{ + struct netwinder_led *led = container_of(cdev, + struct netwinder_led, cdev); + unsigned long flags; + u32 reg; + + raw_spin_lock_irqsave(&nw_gpio_lock, flags); + reg = nw_gpio_read(); + if (b != LED_OFF) + reg &= ~led->mask; + else + reg |= led->mask; + nw_gpio_modify_op(led->mask, reg); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); +} + +static enum led_brightness netwinder_led_get(struct led_classdev *cdev) +{ + struct netwinder_led *led = container_of(cdev, + struct netwinder_led, cdev); + unsigned long flags; + u32 reg; + + raw_spin_lock_irqsave(&nw_gpio_lock, flags); + reg = nw_gpio_read(); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); + + return (reg & led->mask) ? LED_OFF : LED_FULL; +} + +static int __init netwinder_leds_init(void) +{ + int i; + + if (!machine_is_netwinder()) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(netwinder_leds); i++) { + struct netwinder_led *led; + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (!led) + break; + + led->cdev.name = netwinder_leds[i].name; + led->cdev.brightness_set = netwinder_led_set; + led->cdev.brightness_get = netwinder_led_get; + led->cdev.default_trigger = netwinder_leds[i].trigger; + + if (i == 0) + led->mask = GPIO_GREEN_LED; + else + led->mask = GPIO_RED_LED; + + if (led_classdev_register(NULL, &led->cdev) < 0) { + kfree(led); + break; + } + } + + return 0; +} + +/* + * Since we may have triggers on any subsystem, defer registration + * until after subsystem_init. + */ +fs_initcall(netwinder_leds_init); +#endif + MACHINE_START(NETWINDER, "Rebel-NetWinder") /* Maintainer: Russell King/Rebel.com */ .atag_offset = 0x100, @@ -682,6 +766,6 @@ MACHINE_START(NETWINDER, "Rebel-NetWinder") .fixup = fixup_netwinder, .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, - .timer = &isa_timer, + .init_time = isa_timer_init, .restart = netwinder_restart, MACHINE_END diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c deleted file mode 100644 index 5a2bd89cbdc..00000000000 --- a/arch/arm/mach-footbridge/netwinder-leds.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * linux/arch/arm/mach-footbridge/netwinder-leds.c - * - * Copyright (C) 1998-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * NetWinder LED control routines. - * - * The Netwinder uses the leds as follows: - * - Green - toggles state every 50 timer interrupts - * - Red - On if the system is not idle - * - * Changelog: - * 02-05-1999 RMK Various cleanups - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> - -#include <mach/hardware.h> -#include <asm/leds.h> -#include <asm/mach-types.h> - -#define LED_STATE_ENABLED 1 -#define LED_STATE_CLAIMED 2 -static char led_state; -static char hw_led_state; - -static DEFINE_RAW_SPINLOCK(leds_lock); - -static void netwinder_leds_event(led_event_t evt) -{ - unsigned long flags; - - raw_spin_lock_irqsave(&leds_lock, flags); - - switch (evt) { - case led_start: - led_state |= LED_STATE_ENABLED; - hw_led_state = GPIO_GREEN_LED; - break; - - case led_stop: - led_state &= ~LED_STATE_ENABLED; - break; - - case led_claim: - led_state |= LED_STATE_CLAIMED; - hw_led_state = 0; - break; - - case led_release: - led_state &= ~LED_STATE_CLAIMED; - hw_led_state = 0; - break; - -#ifdef CONFIG_LEDS_TIMER - case led_timer: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state ^= GPIO_GREEN_LED; - break; -#endif - -#ifdef CONFIG_LEDS_CPU - case led_idle_start: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state &= ~GPIO_RED_LED; - break; - - case led_idle_end: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state |= GPIO_RED_LED; - break; -#endif - - case led_halted: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state |= GPIO_RED_LED; - break; - - case led_green_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= GPIO_GREEN_LED; - break; - - case led_green_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~GPIO_GREEN_LED; - break; - - case led_amber_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= GPIO_GREEN_LED | GPIO_RED_LED; - break; - - case led_amber_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~(GPIO_GREEN_LED | GPIO_RED_LED); - break; - - case led_red_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= GPIO_RED_LED; - break; - - case led_red_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~GPIO_RED_LED; - break; - - default: - break; - } - - raw_spin_unlock_irqrestore(&leds_lock, flags); - - if (led_state & LED_STATE_ENABLED) { - raw_spin_lock_irqsave(&nw_gpio_lock, flags); - nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state); - raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); - } -} - -static int __init leds_init(void) -{ - if (machine_is_netwinder()) - leds_event = netwinder_leds_event; - - leds_event(led_start); - - return 0; -} - -__initcall(leds_init); diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c index e1e9990fa95..7bdeabdcd4d 100644 --- a/arch/arm/mach-footbridge/personal.c +++ b/arch/arm/mach-footbridge/personal.c @@ -18,7 +18,7 @@ MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer") .atag_offset = 0x100, .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, - .timer = &footbridge_timer, + .init_time = footbridge_timer_init, .restart = footbridge_restart, MACHINE_END |