1 files changed, 80 insertions, 41 deletions

diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index c5c840e947b..50b9aad5e27 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -20,19 +20,15 @@
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/of_address.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-pmu.h>
-
-#include <plat/cpu.h>
+#include <asm/firmware.h>
 
 #include "common.h"
+#include "regs-pmu.h"
 
 extern void exynos4_secondary_startup(void);
 
@@ -40,7 +36,7 @@ static inline void __iomem *cpu_boot_reg_base(void)
 {
 	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
 		return S5P_INFORM5;
-	return S5P_VA_SYSRAM;
+	return sysram_base_addr;
 }
 
 static inline void __iomem *cpu_boot_reg(int cpu)
@@ -48,8 +44,12 @@ static inline void __iomem *cpu_boot_reg(int cpu)
 	void __iomem *boot_reg;
 
 	boot_reg = cpu_boot_reg_base();
+	if (!boot_reg)
+		return ERR_PTR(-ENODEV);
 	if (soc_is_exynos4412())
 		boot_reg += 4*cpu;
+	else if (soc_is_exynos5420() || soc_is_exynos5800())
+		boot_reg += 4;
 	return boot_reg;
 }
 
@@ -62,8 +62,7 @@ static void write_pen_release(int val)
 {
 	pen_release = val;
 	smp_wmb();
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+	sync_cache_w(&pen_release);
 }
 
 static void __iomem *scu_base_addr(void)
@@ -73,16 +72,9 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-static void __cpuinit exynos_secondary_init(unsigned int cpu)
+static void exynos_secondary_init(unsigned int cpu)
 {
 	/*
-	 * if any interrupts are already enabled for the primary
-	 * core (e.g. timer irq), then they will not have been enabled
-	 * for us: do so
-	 */
-	gic_secondary_init(0);
-
-	/*
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
@@ -95,10 +87,12 @@ static void __cpuinit exynos_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
-	unsigned long phys_cpu = cpu_logical_map(cpu);
+	u32 mpidr = cpu_logical_map(cpu);
+	u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	int ret = -ENOSYS;
 
 	/*
 	 * Set synchronisation state between this boot processor
@@ -111,20 +105,18 @@ static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct
 	 * the holding pen - release it, then wait for it to flag
 	 * that it has been released by resetting pen_release.
 	 *
-	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * Note that "pen_release" is the hardware CPU core ID, whereas
 	 * "cpu" is Linux's internal ID.
 	 */
-	write_pen_release(phys_cpu);
-
-	if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
-		__raw_writel(S5P_CORE_LOCAL_PWR_EN,
-			     S5P_ARM_CORE1_CONFIGURATION);
+	write_pen_release(core_id);
 
+	if (!exynos_cpu_power_state(core_id)) {
+		exynos_cpu_power_up(core_id);
 		timeout = 10;
 
 		/* wait max 10 ms until cpu1 is on */
-		while ((__raw_readl(S5P_ARM_CORE1_STATUS)
-			& S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
+		while (exynos_cpu_power_state(core_id)
+		       != S5P_CORE_LOCAL_PWR_EN) {
 			if (timeout-- == 0)
 				break;
 
@@ -145,11 +137,32 @@ static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
+		unsigned long boot_addr;
+
 		smp_rmb();
 
-		__raw_writel(virt_to_phys(exynos4_secondary_startup),
-							cpu_boot_reg(phys_cpu));
-		gic_raise_softirq(cpumask_of(cpu), 0);
+		boot_addr = virt_to_phys(exynos4_secondary_startup);
+
+		/*
+		 * Try to set boot address using firmware first
+		 * and fall back to boot register if it fails.
+		 */
+		ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
+		if (ret && ret != -ENOSYS)
+			goto fail;
+		if (ret == -ENOSYS) {
+			void __iomem *boot_reg = cpu_boot_reg(core_id);
+
+			if (IS_ERR(boot_reg)) {
+				ret = PTR_ERR(boot_reg);
+				goto fail;
+			}
+			__raw_writel(boot_addr, cpu_boot_reg(core_id));
+		}
+
+		call_firmware_op(cpu_boot, core_id);
+
+		arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
 		if (pen_release == -1)
 			break;
@@ -161,9 +174,10 @@ static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct
 	 * now the secondary core is starting up let it run its
 	 * calibrations, then wait for it to finish
 	 */
+fail:
 	spin_unlock(&boot_lock);
 
-	return pen_release != -1 ? -ENOSYS : 0;
+	return pen_release != -1 ? ret : 0;
 }
 
 /*
@@ -176,10 +190,14 @@ static void __init exynos_smp_init_cpus(void)
 	void __iomem *scu_base = scu_base_addr();
 	unsigned int i, ncores;
 
-	if (soc_is_exynos5250())
-		ncores = 2;
-	else
+	if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
 		ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+	else
+		/*
+		 * CPU Nodes are passed thru DT and set_cpu_possible
+		 * is set by "arm_dt_init_cpu_maps".
+		 */
+		return;
 
 	/* sanity check */
 	if (ncores > nr_cpu_ids) {
@@ -190,15 +208,15 @@ static void __init exynos_smp_init_cpus(void)
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int i;
 
-	if (!(soc_is_exynos5250() || soc_is_exynos5440()))
+	exynos_sysram_init();
+
+	if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
 		scu_enable(scu_base_addr());
 
 	/*
@@ -206,10 +224,31 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 	 * system-wide flags register. The boot monitor waits
 	 * until it receives a soft interrupt, and then the
 	 * secondary CPU branches to this address.
+	 *
+	 * Try using firmware operation first and fall back to
+	 * boot register if it fails.
 	 */
-	for (i = 1; i < max_cpus; ++i)
-		__raw_writel(virt_to_phys(exynos4_secondary_startup),
-					cpu_boot_reg(cpu_logical_map(i)));
+	for (i = 1; i < max_cpus; ++i) {
+		unsigned long boot_addr;
+		u32 mpidr;
+		u32 core_id;
+		int ret;
+
+		mpidr = cpu_logical_map(i);
+		core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+		boot_addr = virt_to_phys(exynos4_secondary_startup);
+
+		ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
+		if (ret && ret != -ENOSYS)
+			break;
+		if (ret == -ENOSYS) {
+			void __iomem *boot_reg = cpu_boot_reg(core_id);
+
+			if (IS_ERR(boot_reg))
+				break;
+			__raw_writel(boot_addr, cpu_boot_reg(core_id));
+		}
+	}
 }
 
 struct smp_operations exynos_smp_ops __initdata = {