aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-ep93xx/edb93xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ep93xx/edb93xx.c')
-rw-r--r--arch/arm/mach-ep93xx/edb93xx.c200
1 files changed, 182 insertions, 18 deletions
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 4b043165213..27b14ae92c7 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -30,12 +30,19 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
+
+#include <sound/cs4271.h>
#include <mach/hardware.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "soc.h"
static void __init edb93xx_register_flash(void)
{
@@ -83,8 +90,8 @@ static void __init edb93xx_register_i2c(void)
ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
edb93xxa_i2c_board_info,
ARRAY_SIZE(edb93xxa_i2c_board_info));
- } else if (machine_is_edb9307() || machine_is_edb9312() ||
- machine_is_edb9315()) {
+ } else if (machine_is_edb9302() || machine_is_edb9307()
+ || machine_is_edb9312() || machine_is_edb9315()) {
ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
edb93xx_i2c_board_info,
ARRAY_SIZE(edb93xx_i2c_board_info));
@@ -93,6 +100,89 @@ static void __init edb93xx_register_i2c(void)
/*************************************************************************
+ * EDB93xx SPI peripheral handling
+ *************************************************************************/
+static struct cs4271_platform_data edb93xx_cs4271_data = {
+ .gpio_nreset = -EINVAL, /* filled in later */
+};
+
+static int edb93xx_cs4271_hw_setup(struct spi_device *spi)
+{
+ return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
+ GPIOF_OUT_INIT_HIGH, spi->modalias);
+}
+
+static void edb93xx_cs4271_hw_cleanup(struct spi_device *spi)
+{
+ gpio_free(EP93XX_GPIO_LINE_EGPIO6);
+}
+
+static void edb93xx_cs4271_hw_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
+}
+
+static struct ep93xx_spi_chip_ops edb93xx_cs4271_hw = {
+ .setup = edb93xx_cs4271_hw_setup,
+ .cleanup = edb93xx_cs4271_hw_cleanup,
+ .cs_control = edb93xx_cs4271_hw_cs_control,
+};
+
+static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
+ {
+ .modalias = "cs4271",
+ .platform_data = &edb93xx_cs4271_data,
+ .controller_data = &edb93xx_cs4271_hw,
+ .max_speed_hz = 6000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
+ .num_chipselect = ARRAY_SIZE(edb93xx_spi_board_info),
+};
+
+static void __init edb93xx_register_spi(void)
+{
+ if (machine_is_edb9301() || machine_is_edb9302())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
+ else if (machine_is_edb9302a() || machine_is_edb9307a())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
+ else if (machine_is_edb9315a())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
+
+ ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
+ ARRAY_SIZE(edb93xx_spi_board_info));
+}
+
+
+/*************************************************************************
+ * EDB93xx I2S
+ *************************************************************************/
+static struct platform_device edb93xx_audio_device = {
+ .name = "edb93xx-audio",
+ .id = -1,
+};
+
+static int __init edb93xx_has_audio(void)
+{
+ return (machine_is_edb9301() || machine_is_edb9302() ||
+ machine_is_edb9302a() || machine_is_edb9307a() ||
+ machine_is_edb9315a());
+}
+
+static void __init edb93xx_register_i2s(void)
+{
+ if (edb93xx_has_audio()) {
+ ep93xx_register_i2s();
+ platform_device_register(&edb93xx_audio_device);
+ }
+}
+
+
+/*************************************************************************
* EDB93xx pwm
*************************************************************************/
static void __init edb93xx_register_pwm(void)
@@ -111,100 +201,174 @@ static void __init edb93xx_register_pwm(void)
}
+/*************************************************************************
+ * EDB93xx framebuffer
+ *************************************************************************/
+static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+ .flags = 0,
+};
+
+static int __init edb93xx_has_fb(void)
+{
+ /* These platforms have an ep93xx with video capability */
+ return machine_is_edb9307() || machine_is_edb9307a() ||
+ machine_is_edb9312() || machine_is_edb9315() ||
+ machine_is_edb9315a();
+}
+
+static void __init edb93xx_register_fb(void)
+{
+ if (!edb93xx_has_fb())
+ return;
+
+ if (machine_is_edb9307a() || machine_is_edb9315a())
+ edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
+ else
+ edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
+
+ ep93xx_register_fb(&edb93xxfb_info);
+}
+
+
+/*************************************************************************
+ * EDB93xx IDE
+ *************************************************************************/
+static int __init edb93xx_has_ide(void)
+{
+ /*
+ * Although EDB9312 and EDB9315 do have IDE capability, they have
+ * INTRQ line wired as pull-up, which makes using IDE interface
+ * problematic.
+ */
+ return machine_is_edb9312() || machine_is_edb9315() ||
+ machine_is_edb9315a();
+}
+
+static void __init edb93xx_register_ide(void)
+{
+ if (!edb93xx_has_ide())
+ return;
+
+ ep93xx_register_ide();
+}
+
+
static void __init edb93xx_init_machine(void)
{
ep93xx_init_devices();
edb93xx_register_flash();
ep93xx_register_eth(&edb93xx_eth_data, 1);
edb93xx_register_i2c();
+ edb93xx_register_spi();
+ edb93xx_register_i2s();
edb93xx_register_pwm();
+ edb93xx_register_fb();
+ edb93xx_register_ide();
}
#ifdef CONFIG_MACH_EDB9301
MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9302
MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
/* Maintainer: George Kashperko <george@chas.com.ua> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9302A
MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9307
MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9307A
MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9312
MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9315
MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9315A
MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
+ .init_late = ep93xx_init_late,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-21 10:16:09 +0000