diff options
Diffstat (limited to 'arch/arm/mach-davinci')
42 files changed, 455 insertions, 2549 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index e026b19b23e..584e8d4e289 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -39,8 +39,6 @@ config ARCH_DAVINCI_DA830 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" select ARCH_DAVINCI_DA8XX - select ARCH_HAS_CPUFREQ - select CPU_FREQ_TABLE select CP_INTC config ARCH_DAVINCI_DA8XX @@ -52,11 +50,6 @@ config ARCH_DAVINCI_DM365 select AINTC select ARCH_DAVINCI_DMx -config ARCH_DAVINCI_TNETV107X - bool "TNETV107X based system" - select CPU_V6 - select CP_INTC - comment "DaVinci Board Type" config MACH_DA8XX_DT @@ -215,18 +208,6 @@ config DA850_WL12XX Say Y if you want to use a wl1271 expansion card connected to the AM18x EVM. -config GPIO_PCA953X - default MACH_DAVINCI_DA850_EVM - -config KEYBOARD_GPIO_POLLED - default MACH_DAVINCI_DA850_EVM - -config MACH_TNETV107X - bool "TI TNETV107X Reference Platform" - default ARCH_DAVINCI_TNETV107X - depends on ARCH_DAVINCI_TNETV107X - help - Say Y here to select the TI TNETV107X Evaluation Module. config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 63997a1128e..2204239ed24 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o -obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += tnetv107x.o devices-tnetv107x.o obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o @@ -32,7 +31,6 @@ obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o cdce949.o obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o -obj-$(CONFIG_MACH_TNETV107X) += board-tnetv107x-evm.o obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot index 04a6c4e67b1..4b81601754a 100644 --- a/arch/arm/mach-davinci/Makefile.boot +++ b/arch/arm/mach-davinci/Makefile.boot @@ -1,13 +1,7 @@ -ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y) -ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y) -$(error Cannot enable DaVinci and DA8XX platforms concurrently) -else - zreladdr-y += 0xc0008000 -params_phys-y := 0xc0000100 -initrd_phys-y := 0xc0800000 -endif -else - zreladdr-y += 0x80008000 -params_phys-y := 0x80000100 -initrd_phys-y := 0x80800000 -endif +zreladdr-$(CONFIG_ARCH_DAVINCI_DA8XX) += 0xc0008000 +params_phys-$(CONFIG_ARCH_DAVINCI_DA8XX) := 0xc0000100 +initrd_phys-$(CONFIG_ARCH_DAVINCI_DA8XX) := 0xc0800000 + +zreladdr-$(CONFIG_ARCH_DAVINCI_DMx) += 0x80008000 +params_phys-$(CONFIG_ARCH_DAVINCI_DMx) := 0x80000100 +initrd_phys-$(CONFIG_ARCH_DAVINCI_DMx) := 0x80800000 diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c index f091a9010c2..ff8b7e76b6e 100644 --- a/arch/arm/mach-davinci/aemif.c +++ b/arch/arm/mach-davinci/aemif.c @@ -16,6 +16,7 @@ #include <linux/time.h> #include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/mtd-davinci.h> /* Timing value configuration */ @@ -43,6 +44,17 @@ WSTROBE(WSTROBE_MAX) | \ WSETUP(WSETUP_MAX)) +static inline unsigned int davinci_aemif_readl(void __iomem *base, int offset) +{ + return readl_relaxed(base + offset); +} + +static inline void davinci_aemif_writel(void __iomem *base, + int offset, unsigned long value) +{ + writel_relaxed(value, base + offset); +} + /* * aemif_calc_rate - calculate timing data. * @wanted: The cycle time needed in nanoseconds. @@ -76,6 +88,7 @@ static int aemif_calc_rate(int wanted, unsigned long clk, int max) * @t: timing values to be progammed * @base: The virtual base address of the AEMIF interface * @cs: chip-select to program the timing values for + * @clkrate: the AEMIF clkrate * * This function programs the given timing values (in real clock) into the * AEMIF registers taking the AEMIF clock into account. @@ -86,24 +99,17 @@ static int aemif_calc_rate(int wanted, unsigned long clk, int max) * * Returns 0 on success, else negative errno. */ -int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, - void __iomem *base, unsigned cs) +static int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, + void __iomem *base, unsigned cs, + unsigned long clkrate) { unsigned set, val; int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup; unsigned offset = A1CR_OFFSET + cs * 4; - struct clk *aemif_clk; - unsigned long clkrate; if (!t) return 0; /* Nothing to do */ - aemif_clk = clk_get(NULL, "aemif"); - if (IS_ERR(aemif_clk)) - return PTR_ERR(aemif_clk); - - clkrate = clk_get_rate(aemif_clk); - clkrate /= 1000; /* turn clock into kHz for ease of use */ ta = aemif_calc_rate(t->ta, clkrate, TA_MAX); @@ -130,4 +136,83 @@ int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, return 0; } -EXPORT_SYMBOL(davinci_aemif_setup_timing); + +/** + * davinci_aemif_setup - setup AEMIF interface by davinci_nand_pdata + * @pdev - link to platform device to setup settings for + * + * This function does not use any locking while programming the AEMIF + * because it is expected that there is only one user of a given + * chip-select. + * + * Returns 0 on success, else negative errno. + */ +int davinci_aemif_setup(struct platform_device *pdev) +{ + struct davinci_nand_pdata *pdata = dev_get_platdata(&pdev->dev); + uint32_t val; + unsigned long clkrate; + struct resource *res; + void __iomem *base; + struct clk *clk; + int ret = 0; + + clk = clk_get(&pdev->dev, "aemif"); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(clk); + if (ret < 0) { + dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n", + ret); + goto err_put; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(&pdev->dev, "cannot get IORESOURCE_MEM\n"); + ret = -ENOMEM; + goto err; + } + + base = ioremap(res->start, resource_size(res)); + if (!base) { + dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res); + ret = -ENOMEM; + goto err; + } + + /* + * Setup Async configuration register in case we did not boot + * from NAND and so bootloader did not bother to set it up. + */ + val = davinci_aemif_readl(base, A1CR_OFFSET + pdev->id * 4); + /* + * Extended Wait is not valid and Select Strobe mode is not + * used + */ + val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK); + if (pdata->options & NAND_BUSWIDTH_16) + val |= 0x1; + + davinci_aemif_writel(base, A1CR_OFFSET + pdev->id * 4, val); + + clkrate = clk_get_rate(clk); + + if (pdata->timing) + ret = davinci_aemif_setup_timing(pdata->timing, base, pdev->id, + clkrate); + + if (ret < 0) + dev_dbg(&pdev->dev, "NAND timing values setup fail\n"); + + iounmap(base); +err: + clk_disable_unprepare(clk); +err_put: + clk_put(clk); + return ret; +} diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index c4bdc0a1c36..5623131c4f0 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -17,22 +17,24 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/i2c/pcf857x.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/spi-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <mach/common.h> #include <mach/cp_intc.h> #include <mach/mux.h> -#include <linux/platform_data/mtd-davinci.h> #include <mach/da8xx.h> -#include <linux/platform_data/usb-davinci.h> -#include <linux/platform_data/mtd-davinci-aemif.h> -#include <linux/platform_data/spi-davinci.h> #define DA830_EVM_PHY_ID "" /* @@ -74,7 +76,7 @@ static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler) if (handler != NULL) { da830_evm_usb_ocic_handler = handler; - error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED | + error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "OHCI over-current indicator", NULL); if (error) @@ -417,6 +419,9 @@ static inline void da830_evm_init_nand(int mux_mode) if (ret) pr_warning("da830_evm_init: NAND device not registered.\n"); + if (davinci_aemif_setup(&da830_evm_nand_device)) + pr_warn("%s: Cannot configure AEMIF.\n", __func__); + gpio_direction_output(mux_mode, 1); } #else @@ -591,6 +596,10 @@ static __init void da830_evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; int ret; + ret = da830_register_gpio(); + if (ret) + pr_warn("da830_evm_init: GPIO init failed: %d\n", ret); + ret = da830_register_edma(da830_edma_rsv); if (ret) pr_warning("da830_evm_init: edma registration failed: %d\n", diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index dd1fb24521a..234c5bb091f 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -18,7 +18,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/i2c.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/platform_data/pca953x.h> #include <linux/input.h> #include <linux/input/tps6507x-ts.h> @@ -28,6 +28,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/platform_device.h> +#include <linux/platform_data/gpio-davinci.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> #include <linux/platform_data/spi-davinci.h> @@ -38,6 +39,7 @@ #include <linux/spi/flash.h> #include <linux/wl12xx.h> +#include <mach/common.h> #include <mach/cp_intc.h> #include <mach/da8xx.h> #include <mach/mux.h> @@ -356,6 +358,9 @@ static inline void da850_evm_setup_nor_nand(void) platform_add_devices(da850_evm_devices, ARRAY_SIZE(da850_evm_devices)); + + if (davinci_aemif_setup(&da850_evm_nandflash_device)) + pr_warn("%s: Cannot configure AEMIF.\n", __func__); } } @@ -1437,6 +1442,10 @@ static __init void da850_evm_init(void) { int ret; + ret = da850_register_gpio(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + ret = pmic_tps65070_init(); if (ret) pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 42b23a3194a..06d63d5651f 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -22,15 +22,17 @@ #include <media/tvp514x.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <linux/platform_data/i2c-davinci.h> #include <mach/serial.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/usb-davinci.h> +#include <mach/common.h> #include "davinci.h" @@ -348,11 +350,7 @@ static struct davinci_mmc_config dm355evm_mmc_config = { * you have proper Mini-B or Mini-A cables (or Mini-A adapters) * the ID pin won't need any help. */ -#ifdef CONFIG_USB_MUSB_PERIPHERAL -#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ -#else #define USB_ID_VALUE 1 /* ID pulled low */ -#endif static struct spi_eeprom at25640a = { .byte_len = SZ_64K / 8, @@ -375,6 +373,11 @@ static struct spi_board_info dm355_evm_spi_info[] __initconst = { static __init void dm355_evm_init(void) { struct clk *aemif; + int ret; + + ret = dm355_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); gpio_request(1, "dm9000"); gpio_direction_input(1); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 65a984c52df..680a7a2d910 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -19,15 +19,16 @@ #include <linux/clk.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <linux/platform_data/i2c-davinci.h> +#include <mach/common.h> #include <mach/serial.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/usb-davinci.h> #include "davinci.h" @@ -207,11 +208,7 @@ static struct davinci_mmc_config dm355leopard_mmc_config = { * you have proper Mini-B or Mini-A cables (or Mini-A adapters) * the ID pin won't need any help. */ -#ifdef CONFIG_USB_MUSB_PERIPHERAL -#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ -#else #define USB_ID_VALUE 1 /* ID pulled low */ -#endif static struct spi_eeprom at25640a = { .byte_len = SZ_64K / 8, @@ -234,6 +231,11 @@ static struct spi_board_info dm355_leopard_spi_info[] __initconst = { static __init void dm355_leopard_init(void) { struct clk *aemif; + int ret; + + ret = dm355_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); gpio_request(9, "dm9000"); gpio_direction_input(9); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 92b7f770615..e08a8684ead 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -18,7 +18,7 @@ #include <linux/i2c.h> #include <linux/io.h> #include <linux/clk.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/leds.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -176,7 +176,7 @@ static struct at24_platform_data eeprom_info = { .context = (void *)0x7f00, }; -static struct snd_platform_data dm365_evm_snd_data = { +static struct snd_platform_data dm365_evm_snd_data __maybe_unused = { .asp_chan_q = EVENTQ_3, }; @@ -743,6 +743,12 @@ static struct spi_board_info dm365_evm_spi_info[] __initconst = { static __init void dm365_evm_init(void) { + int ret; + + ret = dm365_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + evm_init_i2c(); davinci_serial_init(dm365_serial_device); diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 40bb9b5b87e..e583e58b5e1 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -15,7 +15,7 @@ #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c/pcf857x.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -754,9 +754,14 @@ static int davinci_phy_fixup(struct phy_device *phydev) static __init void davinci_evm_init(void) { + int ret; struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; + ret = dm644x_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + aemif_clk = clk_get(NULL, "aemif"); clk_prepare_enable(aemif_clk); @@ -773,6 +778,11 @@ static __init void davinci_evm_init(void) /* only one device will be jumpered and detected */ if (HAS_NAND) { platform_device_register(&davinci_evm_nandflash_device); + + if (davinci_aemif_setup(&davinci_evm_nandflash_device)) + pr_warn("%s: Cannot configure AEMIF.\n", + __func__); + evm_leds[7].default_trigger = "nand-disk"; if (HAS_NOR) pr_warning("WARNING: both NAND and NOR flash " @@ -794,11 +804,12 @@ static __init void davinci_evm_init(void) /* irlml6401 switches over 1A, in under 8 msec */ davinci_setup_usb(1000, 8); - soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID; - /* Register the fixup for PHY on DaVinci */ - phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, - davinci_phy_fixup); - + if (IS_BUILTIN(CONFIG_PHYLIB)) { + soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID; + /* Register the fixup for PHY on DaVinci */ + phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, + davinci_phy_fixup); + } } MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 2bc3651d56c..ae129bc4927 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -22,7 +22,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/i2c/pcf857x.h> #include <media/tvp514x.h> @@ -33,17 +33,19 @@ #include <linux/mtd/partitions.h> #include <linux/clk.h> #include <linux/export.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/common.h> +#include <mach/irqs.h> #include <mach/serial.h> -#include <linux/platform_data/i2c-davinci.h> -#include <linux/platform_data/mtd-davinci.h> #include <mach/clock.h> #include <mach/cdce949.h> -#include <linux/platform_data/mtd-davinci-aemif.h> #include "davinci.h" #include "clock.h" @@ -786,8 +788,13 @@ static struct edma_rsv_info dm646x_edma_rsv[] = { static __init void evm_init(void) { + int ret; struct davinci_soc_info *soc_info = &davinci_soc_info; + ret = dm646x_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + evm_init_i2c(); davinci_serial_init(dm646x_serial_device); dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); @@ -798,6 +805,9 @@ static __init void evm_init(void) platform_device_register(&davinci_nand_device); + if (davinci_aemif_setup(&davinci_nand_device)) + pr_warn("%s: Cannot configure AEMIF.\n", __func__); + dm646x_init_edma(dm646x_edma_rsv); if (HAS_ATA) diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index cd0f58730c2..96fc00a167f 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -15,7 +15,7 @@ #include <linux/mtd/partitions.h> #include <linux/regulator/machine.h> #include <linux/i2c.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/etherdevice.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> @@ -27,6 +27,7 @@ #include <mach/cp_intc.h> #include <mach/da8xx.h> #include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> #include <mach/mux.h> #include <linux/platform_data/spi-davinci.h> @@ -432,6 +433,9 @@ static void __init mityomapl138_setup_nand(void) { platform_add_devices(mityomapl138_devices, ARRAY_SIZE(mityomapl138_devices)); + + if (davinci_aemif_setup(&mityomapl138_nandflash_device)) + pr_warn("%s: Cannot configure AEMIF.\n", __func__); } static const short mityomap_mii_pins[] = { diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 46f336fca80..bb680af9837 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -26,17 +26,18 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/mtd/partitions.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/common.h> -#include <linux/platform_data/i2c-davinci.h> #include <mach/serial.h> #include <mach/mux.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/usb-davinci.h> #include "davinci.h" @@ -169,9 +170,14 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = { static __init void davinci_ntosd2_init(void) { + int ret; struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; + ret = dm644x_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + aemif_clk = clk_get(NULL, "aemif"); clk_prepare_enable(aemif_clk); diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index ab98c75cabb..2aac51d0e85 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -13,10 +13,12 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/gpio.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <mach/common.h> #include <mach/cp_intc.h> #include <mach/da8xx.h> #include <mach/mux.h> @@ -211,7 +213,7 @@ static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler) hawk_usb_ocic_handler = handler; error = request_irq(irq, omapl138_hawk_usb_ocic_irq, - IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "OHCI over-current indicator", NULL); if (error) @@ -290,6 +292,10 @@ static __init void omapl138_hawk_init(void) { int ret; + ret = da850_register_gpio(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + davinci_serial_init(da8xx_serial_device); omapl138_hawk_config_emac(); diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index d8436014810..41c7c961579 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -26,7 +26,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c deleted file mode 100644 index 78ea395d2ac..00000000000 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * Texas Instruments TNETV107X EVM Board Support - * - * Copyright (C) 2010 Texas Instruments - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/dma-mapping.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/ratelimit.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/platform_data/edma.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <mach/irqs.h> -#include <mach/mux.h> -#include <mach/cp_intc.h> -#include <mach/tnetv107x.h> - -#define EVM_MMC_WP_GPIO 21 -#define EVM_MMC_CD_GPIO 24 -#define EVM_SPI_CS_GPIO 54 - -static int initialize_gpio(int gpio, char *desc) -{ - int ret; - - ret = gpio_request(gpio, desc); - if (ret < 0) { - pr_err_ratelimited("cannot open %s gpio\n", desc); - return -ENOSYS; - } - gpio_direction_input(gpio); - return gpio; -} - -static int mmc_get_cd(int index) -{ - static int gpio; - - if (!gpio) - gpio = initialize_gpio(EVM_MMC_CD_GPIO, "mmc card detect"); - - if (gpio < 0) - return gpio; - - return gpio_get_value(gpio) ? 0 : 1; -} - -static int mmc_get_ro(int index) -{ - static int gpio; - - if (!gpio) - gpio = initialize_gpio(EVM_MMC_WP_GPIO, "mmc write protect"); - - if (gpio < 0) - return gpio; - - return gpio_get_value(gpio) ? 1 : 0; -} - -static struct davinci_mmc_config mmc_config = { - .get_cd = mmc_get_cd, - .get_ro = mmc_get_ro, - .wires = 4, - .max_freq = 50000000, - .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, -}; - -static const short sdio1_pins[] __initconst = { - TNETV107X_SDIO1_CLK_1, TNETV107X_SDIO1_CMD_1, - TNETV107X_SDIO1_DATA0_1, TNETV107X_SDIO1_DATA1_1, - TNETV107X_SDIO1_DATA2_1, TNETV107X_SDIO1_DATA3_1, - TNETV107X_GPIO21, TNETV107X_GPIO24, - -1 -}; - -static const short uart1_pins[] __initconst = { - TNETV107X_UART1_RD, TNETV107X_UART1_TD, - -1 -}; - -static const short ssp_pins[] __initconst = { - TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2, - TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2, - TNETV107X_SSP1_3, -1 -}; - -static struct mtd_partition nand_partitions[] = { - /* bootloader (U-Boot, etc) in first 12 sectors */ - { - .name = "bootloader", - .offset = 0, - .size = (12*SZ_128K), - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_4M, - .mask_flags = 0, - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - } -}; - -static struct davinci_nand_pdata nand_config = { - .mask_cle = 0x4000, - .mask_ale = 0x2000, - .parts = nand_partitions, - .nr_parts = ARRAY_SIZE(nand_partitions), - .ecc_mode = NAND_ECC_HW, - .bbt_options = NAND_BBT_USE_FLASH, - .ecc_bits = 1, -}; - -static struct davinci_uart_config serial_config __initconst = { - .enabled_uarts = BIT(1), -}; - -static const uint32_t keymap[] = { - KEY(0, 0, KEY_NUMERIC_1), - KEY(0, 1, KEY_NUMERIC_2), - KEY(0, 2, KEY_NUMERIC_3), - KEY(0, 3, KEY_FN_F1), - KEY(0, 4, KEY_MENU), - - KEY(1, 0, KEY_NUMERIC_4), - KEY(1, 1, KEY_NUMERIC_5), - KEY(1, 2, KEY_NUMERIC_6), - KEY(1, 3, KEY_UP), - KEY(1, 4, KEY_FN_F2), - - KEY(2, 0, KEY_NUMERIC_7), - KEY(2, 1, KEY_NUMERIC_8), - KEY(2, 2, KEY_NUMERIC_9), - KEY(2, 3, KEY_LEFT), - KEY(2, 4, KEY_ENTER), - - KEY(3, 0, KEY_NUMERIC_STAR), - KEY(3, 1, KEY_NUMERIC_0), - KEY(3, 2, KEY_NUMERIC_POUND), - KEY(3, 3, KEY_DOWN), - KEY(3, 4, KEY_RIGHT), - - KEY(4, 0, KEY_FN_F3), - KEY(4, 1, KEY_FN_F4), - KEY(4, 2, KEY_MUTE), - KEY(4, 3, KEY_HOME), - KEY(4, 4, KEY_BACK), - - KEY(5, 0, KEY_VOLUMEDOWN), - KEY(5, 1, KEY_VOLUMEUP), - KEY(5, 2, KEY_F1), - KEY(5, 3, KEY_F2), - KEY(5, 4, KEY_F3), -}; - -static const struct matrix_keymap_data keymap_data = { - .keymap = keymap, - .keymap_size = ARRAY_SIZE(keymap), -}; - -static struct matrix_keypad_platform_data keypad_config = { - .keymap_data = &keymap_data, - .num_row_gpios = 6, - .num_col_gpios = 5, - .debounce_ms = 0, /* minimum */ - .active_low = 0, /* pull up realization */ - .no_autorepeat = 0, -}; - -static void spi_select_device(int cs) -{ - static int gpio; - - if (!gpio) { - int ret; - ret = gpio_request(EVM_SPI_CS_GPIO, "spi chipsel"); - if (ret < 0) { - pr_err("cannot open spi chipsel gpio\n"); - gpio = -ENOSYS; - return; - } else { - gpio = EVM_SPI_CS_GPIO; - gpio_direction_output(gpio, 0); - } - } - - if (gpio < 0) - return; - - return gpio_set_value(gpio, cs ? 1 : 0); -} - -static struct ti_ssp_spi_data spi_master_data = { - .num_cs = 2, - .select = spi_select_device, - .iosel = SSP_PIN_SEL(0, SSP_CLOCK) | SSP_PIN_SEL(1, SSP_DATA) | - SSP_PIN_SEL(2, SSP_CHIPSEL) | SSP_PIN_SEL(3, SSP_IN) | - SSP_INPUT_SEL(3), -}; - -static struct ti_ssp_data ssp_config = { - .out_clock = 250 * 1000, - .dev_data = { - [1] = { - .dev_name = "ti-ssp-spi", - .pdata = &spi_master_data, - .pdata_size = sizeof(spi_master_data), - }, - }, -}; - -static struct tnetv107x_device_info evm_device_info __initconst = { - .serial_config = &serial_config, - .mmc_config[1] = &mmc_config, /* controller 1 */ - .nand_config[0] = &nand_config, /* chip select 0 */ - .keypad_config = &keypad_config, - .ssp_config = &ssp_config, -}; - -static struct spi_board_info spi_info[] __initconst = { -}; - -static __init void tnetv107x_evm_board_init(void) -{ - davinci_cfg_reg_list(sdio1_pins); - davinci_cfg_reg_list(uart1_pins); - davinci_cfg_reg_list(ssp_pins); - - tnetv107x_devices_init(&evm_device_info); - - spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); -} - -#ifdef CONFIG_SERIAL_8250_CONSOLE -static int __init tnetv107x_evm_console_init(void) -{ - return add_preferred_console("ttyS", 0, "115200"); -} -console_initcall(tnetv107x_evm_console_init); -#endif - -MACHINE_START(TNETV107X, "TNETV107X EVM") - .atag_offset = 0x100, - .map_io = tnetv107x_init, - .init_irq = cp_intc_init, - .init_time = davinci_timer_init, - .init_machine = tnetv107x_evm_board_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, - .restart = tnetv107x_restart, -MACHINE_END diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index dc9a470ff9c..985e5fd00fb 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -133,7 +133,7 @@ EXPORT_SYMBOL(clk_get_rate); long clk_round_rate(struct clk *clk, unsigned long rate) { if (clk == NULL || IS_ERR(clk)) - return -EINVAL; + return 0; if (clk->round_rate) return clk->round_rate(clk, rate); diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index d6c746e35ad..115d5736da8 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -11,6 +11,7 @@ #include <linux/gpio.h> #include <linux/init.h> #include <linux/clk.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> @@ -20,7 +21,6 @@ #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> -#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" @@ -385,7 +385,7 @@ static struct clk_lookup da830_clks[] = { CLK(NULL, "pll0_sysclk7", &pll0_sysclk7), CLK("i2c_davinci.1", NULL, &i2c0_clk), CLK(NULL, "timer0", &timerp64_0_clk), - CLK("watchdog", NULL, &timerp64_1_clk), + CLK("davinci-wdt", NULL, &timerp64_1_clk), CLK(NULL, "arm_rom", &arm_rom_clk), CLK(NULL, "scr0_ss", &scr0_ss_clk), CLK(NULL, "scr1_ss", &scr1_ss_clk), @@ -1151,6 +1151,15 @@ static struct davinci_id da830_ids[] = { }, }; +static struct davinci_gpio_platform_data da830_gpio_platform_data = { + .ngpio = 128, +}; + +int __init da830_register_gpio(void) +{ + return da8xx_register_gpio(&da830_gpio_platform_data); +} + static struct davinci_timer_instance da830_timer_instance[2] = { { .base = DA8XX_TIMER64P0_BASE, @@ -1196,10 +1205,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = { .intc_irq_prios = da830_default_priorities, .intc_irq_num = DA830_N_CP_INTC_IRQ, .timer_info = &da830_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DA8XX_GPIO_BASE, - .gpio_num = 128, - .gpio_irq = IRQ_DA8XX_GPIO0, .emac_pdata = &da8xx_emac_pdata, }; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index f56e5fbfa2f..45ce065e717 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/cpufreq.h> #include <linux/regulator/consumer.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> @@ -28,7 +29,6 @@ #include <mach/da8xx.h> #include <mach/cpufreq.h> #include <mach/pm.h> -#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" @@ -443,7 +443,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), CLK("i2c_davinci.1", NULL, &i2c0_clk), CLK(NULL, "timer0", &timerp64_0_clk), - CLK("watchdog", NULL, &timerp64_1_clk), + CLK("davinci-wdt", NULL, &timerp64_1_clk), CLK(NULL, "arm_rom", &arm_rom_clk), CLK(NULL, "tpcc0", &tpcc0_clk), CLK(NULL, "tptc0", &tptc0_clk), @@ -472,7 +472,7 @@ static struct clk_lookup da850_clks[] = { CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), CLK("vpif", NULL, &vpif_clk), - CLK("ahci", NULL, &sata_clk), + CLK("ahci_da850", NULL, &sata_clk), CLK("davinci-rproc.0", NULL, &dsp_clk), CLK("ehrpwm", "fck", &ehrpwm_clk), CLK("ehrpwm", "tbclk", &ehrpwm_tbclk), @@ -1092,20 +1092,21 @@ int da850_register_cpufreq(char *async_clk) static int da850_round_armrate(struct clk *clk, unsigned long rate) { - int i, ret = 0, diff; + int ret = 0, diff; unsigned int best = (unsigned int) -1; struct cpufreq_frequency_table *table = cpufreq_info.freq_table; + struct cpufreq_frequency_table *pos; rate /= 1000; /* convert to kHz */ - for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) { - diff = table[i].frequency - rate; + cpufreq_for_each_entry(pos, table) { + diff = pos->frequency - rate; if (diff < 0) diff = -diff; if (diff < best) { best = diff; - ret = table[i].frequency; + ret = pos->frequency; } } @@ -1281,6 +1282,15 @@ int __init da850_register_vpif_capture(struct vpif_capture_config return platform_device_register(&da850_vpif_capture_dev); } +static struct davinci_gpio_platform_data da850_gpio_platform_data = { + .ngpio = 144, +}; + +int __init da850_register_gpio(void) +{ + return da8xx_register_gpio(&da850_gpio_platform_data); +} + static struct davinci_soc_info davinci_soc_info_da850 = { .io_desc = da850_io_desc, .io_desc_num = ARRAY_SIZE(da850_io_desc), @@ -1298,10 +1308,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = { .intc_irq_prios = da850_default_priorities, .intc_irq_num = DA850_N_CP_INTC_IRQ, .timer_info = &da850_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DA8XX_GPIO_BASE, - .gpio_num = 144, - .gpio_irq = IRQ_DA8XX_GPIO0, .emac_pdata = &da8xx_emac_pdata, .sram_dma = DA8XX_SHARED_RAM_BASE, .sram_len = SZ_128K, diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index d2bc574ae17..ed1928740b5 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -32,7 +32,7 @@ static void __init da8xx_init_irq(void) static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL), - OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL), + OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "davinci-wdt", NULL), OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL), OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm", NULL), OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f02000, "ehrpwm", NULL), diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 2ab5d577186..4ffc37accce 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -53,6 +53,9 @@ extern void __iomem *davinci_sysmod_base; #define DAVINCI_SYSMOD_VIRT(x) (davinci_sysmod_base + (x)) void davinci_map_sysmod(void); +#define DAVINCI_GPIO_BASE 0x01C67000 +int davinci_gpio_register(struct resource *res, int size, void *pdata); + /* DM355 base addresses */ #define DM355_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DM355_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 @@ -76,12 +79,15 @@ void davinci_map_sysmod(void); #define DM646X_ASYNC_EMIF_CONTROL_BASE 0x20008000 #define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000 +int davinci_init_wdt(void); + /* DM355 function declarations */ void dm355_init(void); void dm355_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); int dm355_init_video(struct vpfe_config *, struct vpbe_config *); +int dm355_gpio_register(void); /* DM365 function declarations */ void dm365_init(void); @@ -92,11 +98,13 @@ void dm365_init_rtc(void); void dm365_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); int dm365_init_video(struct vpfe_config *, struct vpbe_config *); +int dm365_gpio_register(void); /* DM644x function declarations */ void dm644x_init(void); void dm644x_init_asp(struct snd_platform_data *pdata); int dm644x_init_video(struct vpfe_config *, struct vpbe_config *); +int dm644x_gpio_register(void); /* DM646x function declarations */ void dm646x_init(void); @@ -106,6 +114,7 @@ int dm646x_init_edma(struct edma_rsv_info *rsv); void dm646x_video_init(void); void dm646x_setup_vpif(struct vpif_display_config *, struct vpif_capture_config *); +int dm646x_gpio_register(void); extern struct platform_device dm365_serial_device[]; extern struct platform_device dm355_serial_device[]; diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 2e473fefd71..b85b781b05f 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -134,13 +134,6 @@ struct platform_device da8xx_serial_device[] = { } }; -static s8 da8xx_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {-1, -1} -}; - static s8 da8xx_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -148,12 +141,6 @@ static s8 da8xx_queue_priority_mapping[][2] = { {-1, -1} }; -static s8 da850_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {-1, -1} -}; - static s8 da850_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -161,12 +148,6 @@ static s8 da850_queue_priority_mapping[][2] = { }; static struct edma_soc_info da830_edma_cc0_info = { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = da8xx_queue_tc_mapping, .queue_priority_mapping = da8xx_queue_priority_mapping, .default_queue = EVENTQ_1, }; @@ -177,22 +158,10 @@ static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = { static struct edma_soc_info da850_edma_cc_info[] = { { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = da8xx_queue_tc_mapping, .queue_priority_mapping = da8xx_queue_priority_mapping, .default_queue = EVENTQ_1, }, { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 1, - .n_cc = 1, - .queue_tc_mapping = da850_queue_tc_mapping, .queue_priority_mapping = da850_queue_priority_mapping, .default_queue = EVENTQ_0, }, @@ -389,7 +358,7 @@ static struct resource da8xx_watchdog_resources[] = { }; static struct platform_device da8xx_wdt_device = { - .name = "watchdog", + .name = "davinci-wdt", .id = -1, .num_resources = ARRAY_SIZE(da8xx_watchdog_resources), .resource = da8xx_watchdog_resources, @@ -399,7 +368,7 @@ void da8xx_restart(enum reboot_mode mode, const char *cmd) { struct device *dev; - dev = bus_find_device_by_name(&platform_bus_type, NULL, "watchdog"); + dev = bus_find_device_by_name(&platform_bus_type, NULL, "davinci-wdt"); if (!dev) { pr_err("%s: failed to find watchdog device\n", __func__); return; @@ -487,7 +456,7 @@ int __init da8xx_register_emac(void) static struct resource da830_mcasp1_resources[] = { { - .name = "mcasp1", + .name = "mpu", .start = DAVINCI_DA830_MCASP1_REG_BASE, .end = DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1, .flags = IORESOURCE_MEM, @@ -515,7 +484,7 @@ static struct platform_device da830_mcasp1_device = { static struct resource da850_mcasp_resources[] = { { - .name = "mcasp", + .name = "mpu", .start = DAVINCI_DA8XX_MCASP0_REG_BASE, .end = DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1, .flags = IORESOURCE_MEM, @@ -665,6 +634,32 @@ int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata) return platform_device_register(&da8xx_lcdc_device); } +static struct resource da8xx_gpio_resources[] = { + { /* registers */ + .start = DA8XX_GPIO_BASE, + .end = DA8XX_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DA8XX_GPIO0, + .end = IRQ_DA8XX_GPIO8, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da8xx_gpio_device = { + .name = "davinci_gpio", + .id = -1, + .num_resources = ARRAY_SIZE(da8xx_gpio_resources), + .resource = da8xx_gpio_resources, +}; + +int __init da8xx_register_gpio(void *pdata) +{ + da8xx_gpio_device.dev.platform_data = pdata; + return platform_device_register(&da8xx_gpio_device); +} + static struct resource da8xx_mmcsd0_resources[] = { { /* registers */ .start = DA8XX_MMCSD0_BASE, @@ -994,7 +989,6 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect) } #ifdef CONFIG_ARCH_DAVINCI_DA850 - static struct resource da850_sata_resources[] = { { .start = DA850_SATA_BASE, @@ -1002,103 +996,22 @@ static struct resource da850_sata_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG, + .end = DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG + 0x3, + .flags = IORESOURCE_MEM, + }, + { .start = IRQ_DA850_SATAINT, .flags = IORESOURCE_IRQ, }, }; -/* SATA PHY Control Register offset from AHCI base */ -#define SATA_P0PHYCR_REG 0x178 - -#define SATA_PHY_MPY(x) ((x) << 0) -#define SATA_PHY_LOS(x) ((x) << 6) -#define SATA_PHY_RXCDR(x) ((x) << 10) -#define SATA_PHY_RXEQ(x) ((x) << 13) -#define SATA_PHY_TXSWING(x) ((x) << 19) -#define SATA_PHY_ENPLL(x) ((x) << 31) - -static struct clk *da850_sata_clk; -static unsigned long da850_sata_refclkpn; - -/* Supported DA850 SATA crystal frequencies */ -#define KHZ_TO_HZ(freq) ((freq) * 1000) -static unsigned long da850_sata_xtal[] = { - KHZ_TO_HZ(300000), - KHZ_TO_HZ(250000), - 0, /* Reserved */ - KHZ_TO_HZ(187500), - KHZ_TO_HZ(150000), - KHZ_TO_HZ(125000), - KHZ_TO_HZ(120000), - KHZ_TO_HZ(100000), - KHZ_TO_HZ(75000), - KHZ_TO_HZ(60000), -}; - -static int da850_sata_init(struct device *dev, void __iomem *addr) -{ - int i, ret; - unsigned int val; - - da850_sata_clk = clk_get(dev, NULL); - if (IS_ERR(da850_sata_clk)) - return PTR_ERR(da850_sata_clk); - - ret = clk_prepare_enable(da850_sata_clk); - if (ret) - goto err0; - - /* Enable SATA clock receiver */ - val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG)); - val &= ~BIT(0); - __raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG)); - - /* Get the multiplier needed for 1.5GHz PLL output */ - for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++) - if (da850_sata_xtal[i] == da850_sata_refclkpn) - break; - - if (i == ARRAY_SIZE(da850_sata_xtal)) { - ret = -EINVAL; - goto err1; - } - - val = SATA_PHY_MPY(i + 1) | - SATA_PHY_LOS(1) | - SATA_PHY_RXCDR(4) | - SATA_PHY_RXEQ(1) | - SATA_PHY_TXSWING(3) | - SATA_PHY_ENPLL(1); - - __raw_writel(val, addr + SATA_P0PHYCR_REG); - - return 0; - -err1: - clk_disable_unprepare(da850_sata_clk); -err0: - clk_put(da850_sata_clk); - return ret; -} - -static void da850_sata_exit(struct device *dev) -{ - clk_disable_unprepare(da850_sata_clk); - clk_put(da850_sata_clk); -} - -static struct ahci_platform_data da850_sata_pdata = { - .init = da850_sata_init, - .exit = da850_sata_exit, -}; - static u64 da850_sata_dmamask = DMA_BIT_MASK(32); static struct platform_device da850_sata_device = { - .name = "ahci", + .name = "ahci_da850", .id = -1, .dev = { - .platform_data = &da850_sata_pdata, .dma_mask = &da850_sata_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, @@ -1108,9 +1021,8 @@ static struct platform_device da850_sata_device = { int __init da850_register_sata(unsigned long refclkpn) { - da850_sata_refclkpn = refclkpn; - if (!da850_sata_refclkpn) - return -EINVAL; + /* please see comment in drivers/ata/ahci_da850.c */ + BUG_ON(refclkpn != 100 * 1000 * 1000); return platform_device_register(&da850_sata_device); } diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c deleted file mode 100644 index 01d8686e553..00000000000 --- a/arch/arm/mach-davinci/devices-tnetv107x.c +++ /dev/null @@ -1,434 +0,0 @@ -/* - * Texas Instruments TNETV107X SoC devices - * - * Copyright (C) 2010 Texas Instruments - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/clk.h> -#include <linux/slab.h> -#include <linux/platform_data/edma.h> - -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/tnetv107x.h> - -#include "clock.h" - -/* Base addresses for on-chip devices */ -#define TNETV107X_TPCC_BASE 0x01c00000 -#define TNETV107X_TPTC0_BASE 0x01c10000 -#define TNETV107X_TPTC1_BASE 0x01c10400 -#define TNETV107X_WDOG_BASE 0x08086700 -#define TNETV107X_TSC_BASE 0x08088500 -#define TNETV107X_SDIO0_BASE 0x08088700 -#define TNETV107X_SDIO1_BASE 0x08088800 -#define TNETV107X_KEYPAD_BASE 0x08088a00 -#define TNETV107X_SSP_BASE 0x08088c00 -#define TNETV107X_ASYNC_EMIF_CNTRL_BASE 0x08200000 -#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE 0x30000000 -#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE 0x40000000 -#define TNETV107X_ASYNC_EMIF_DATA_CE2_BASE 0x44000000 -#define TNETV107X_ASYNC_EMIF_DATA_CE3_BASE 0x48000000 - -/* TNETV107X specific EDMA3 information */ -#define EDMA_TNETV107X_NUM_DMACH 64 -#define EDMA_TNETV107X_NUM_TCC 64 -#define EDMA_TNETV107X_NUM_PARAMENTRY 128 -#define EDMA_TNETV107X_NUM_EVQUE 2 -#define EDMA_TNETV107X_NUM_TC 2 -#define EDMA_TNETV107X_CHMAP_EXIST 0 -#define EDMA_TNETV107X_NUM_REGIONS 4 -#define TNETV107X_DMACH2EVENT_MAP0 0x3C0CE000u -#define TNETV107X_DMACH2EVENT_MAP1 0x000FFFFFu - -#define TNETV107X_DMACH_SDIO0_RX 26 -#define TNETV107X_DMACH_SDIO0_TX 27 -#define TNETV107X_DMACH_SDIO1_RX 28 -#define TNETV107X_DMACH_SDIO1_TX 29 - -static s8 edma_tc_mapping[][2] = { - /* event queue no TC no */ - { 0, 0 }, - { 1, 1 }, - { -1, -1 } -}; - -static s8 edma_priority_mapping[][2] = { - /* event queue no Prio */ - { 0, 3 }, - { 1, 7 }, - { -1, -1 } -}; - -static struct edma_soc_info edma_cc0_info = { - .n_channel = EDMA_TNETV107X_NUM_DMACH, - .n_region = EDMA_TNETV107X_NUM_REGIONS, - .n_slot = EDMA_TNETV107X_NUM_PARAMENTRY, - .n_tc = EDMA_TNETV107X_NUM_TC, - .n_cc = 1, - .queue_tc_mapping = edma_tc_mapping, - .queue_priority_mapping = edma_priority_mapping, - .default_queue = EVENTQ_1, -}; - -static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = { - &edma_cc0_info, -}; - -static struct resource edma_resources[] = { - { - .name = "edma_cc0", - .start = TNETV107X_TPCC_BASE, - .end = TNETV107X_TPCC_BASE + SZ_32K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma_tc0", - .start = TNETV107X_TPTC0_BASE, - .end = TNETV107X_TPTC0_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma_tc1", - .start = TNETV107X_TPTC1_BASE, - .end = TNETV107X_TPTC1_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma0", - .start = IRQ_TNETV107X_TPCC, - .flags = IORESOURCE_IRQ, - }, - { - .name = "edma0_err", - .start = IRQ_TNETV107X_TPCC_ERR, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device edma_device = { - .name = "edma", - .id = -1, - .num_resources = ARRAY_SIZE(edma_resources), - .resource = edma_resources, - .dev.platform_data = tnetv107x_edma_info, -}; - -static struct plat_serial8250_port serial0_platform_data[] = { - { - .mapbase = TNETV107X_UART0_BASE, - .irq = IRQ_TNETV107X_UART0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_FIXED_TYPE | UPF_IOREMAP, - .type = PORT_AR7, - .iotype = UPIO_MEM32, - .regshift = 2, - }, - { - .flags = 0, - } -}; -static struct plat_serial8250_port serial1_platform_data[] = { - { - .mapbase = TNETV107X_UART1_BASE, - .irq = IRQ_TNETV107X_UART1, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_FIXED_TYPE | UPF_IOREMAP, - .type = PORT_AR7, - .iotype = UPIO_MEM32, - .regshift = 2, - }, - { - .flags = 0, - } -}; -static struct plat_serial8250_port serial2_platform_data[] = { - { - .mapbase = TNETV107X_UART2_BASE, - .irq = IRQ_TNETV107X_UART2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_FIXED_TYPE | UPF_IOREMAP, - .type = PORT_AR7, - .iotype = UPIO_MEM32, - .regshift = 2, - }, - { - .flags = 0, - } -}; - - -struct platform_device tnetv107x_serial_device[] = { - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev.platform_data = serial0_platform_data, - }, - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev.platform_data = serial1_platform_data, - }, - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, - .dev.platform_data = serial2_platform_data, - }, - { - } -}; - -static struct resource mmc0_resources[] = { - { /* Memory mapped registers */ - .start = TNETV107X_SDIO0_BASE, - .end = TNETV107X_SDIO0_BASE + 0x0ff, - .flags = IORESOURCE_MEM - }, - { /* MMC interrupt */ - .start = IRQ_TNETV107X_MMC0, - .flags = IORESOURCE_IRQ - }, - { /* SDIO interrupt */ - .start = IRQ_TNETV107X_SDIO0, - .flags = IORESOURCE_IRQ - }, - { /* DMA RX */ - .start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_RX), - .flags = IORESOURCE_DMA - }, - { /* DMA TX */ - .start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_TX), - .flags = IORESOURCE_DMA - }, -}; - -static struct resource mmc1_resources[] = { - { /* Memory mapped registers */ - .start = TNETV107X_SDIO1_BASE, - .end = TNETV107X_SDIO1_BASE + 0x0ff, - .flags = IORESOURCE_MEM - }, - { /* MMC interrupt */ - .start = IRQ_TNETV107X_MMC1, - .flags = IORESOURCE_IRQ - }, - { /* SDIO interrupt */ - .start = IRQ_TNETV107X_SDIO1, - .flags = IORESOURCE_IRQ - }, - { /* DMA RX */ - .start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_RX), - .flags = IORESOURCE_DMA - }, - { /* DMA TX */ - .start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_TX), - .flags = IORESOURCE_DMA - }, -}; - -static u64 mmc0_dma_mask = DMA_BIT_MASK(32); -static u64 mmc1_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device mmc_devices[2] = { - { - .name = "dm6441-mmc", - .id = 0, - .dev = { - .dma_mask = &mmc0_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(mmc0_resources), - .resource = mmc0_resources - }, - { - .name = "dm6441-mmc", - .id = 1, - .dev = { - .dma_mask = &mmc1_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(mmc1_resources), - .resource = mmc1_resources - }, -}; - -static const u32 emif_windows[] = { - TNETV107X_ASYNC_EMIF_DATA_CE0_BASE, TNETV107X_ASYNC_EMIF_DATA_CE1_BASE, - TNETV107X_ASYNC_EMIF_DATA_CE2_BASE, TNETV107X_ASYNC_EMIF_DATA_CE3_BASE, -}; - -static const u32 emif_window_sizes[] = { SZ_256M, SZ_64M, SZ_64M, SZ_64M }; - -static struct resource wdt_resources[] = { - { - .start = TNETV107X_WDOG_BASE, - .end = TNETV107X_WDOG_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device tnetv107x_wdt_device = { - .name = "tnetv107x_wdt", - .id = 0, - .num_resources = ARRAY_SIZE(wdt_resources), - .resource = wdt_resources, -}; - -static int __init nand_init(int chipsel, struct davinci_nand_pdata *data) -{ - struct resource res[2]; - struct platform_device *pdev; - u32 range; - int ret; - - /* Figure out the resource range from the ale/cle masks */ - range = max(data->mask_cle, data->mask_ale); - range = PAGE_ALIGN(range + 4) - 1; - - if (range >= emif_window_sizes[chipsel]) - return -EINVAL; - - pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); - if (!pdev) - return -ENOMEM; - - pdev->name = "davinci_nand"; - pdev->id = chipsel; - pdev->dev.platform_data = data; - - memset(res, 0, sizeof(res)); - - res[0].start = emif_windows[chipsel]; - res[0].end = res[0].start + range; - res[0].flags = IORESOURCE_MEM; - - res[1].start = TNETV107X_ASYNC_EMIF_CNTRL_BASE; - res[1].end = res[1].start + SZ_4K - 1; - res[1].flags = IORESOURCE_MEM; - - ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); - if (ret < 0) { - kfree(pdev); - return ret; - } - - return platform_device_register(pdev); -} - -static struct resource keypad_resources[] = { - { - .start = TNETV107X_KEYPAD_BASE, - .end = TNETV107X_KEYPAD_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_TNETV107X_KEYPAD, - .flags = IORESOURCE_IRQ, - .name = "press", - }, - { - .start = IRQ_TNETV107X_KEYPAD_FREE, - .flags = IORESOURCE_IRQ, - .name = "release", - }, -}; - -static struct platform_device keypad_device = { - .name = "tnetv107x-keypad", - .num_resources = ARRAY_SIZE(keypad_resources), - .resource = keypad_resources, -}; - -static struct resource tsc_resources[] = { - { - .start = TNETV107X_TSC_BASE, - .end = TNETV107X_TSC_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_TNETV107X_TSC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tsc_device = { - .name = "tnetv107x-ts", - .num_resources = ARRAY_SIZE(tsc_resources), - .resource = tsc_resources, -}; - -static struct resource ssp_resources[] = { - { - .start = TNETV107X_SSP_BASE, - .end = TNETV107X_SSP_BASE + 0x1ff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_TNETV107X_SSP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ssp_device = { - .name = "ti-ssp", - .id = -1, - .num_resources = ARRAY_SIZE(ssp_resources), - .resource = ssp_resources, -}; - -void __init tnetv107x_devices_init(struct tnetv107x_device_info *info) -{ - int i, error; - struct clk *tsc_clk; - - /* - * The reset defaults for tnetv107x tsc clock divider is set too high. - * This forces the clock down to a range that allows the ADC to - * complete sample conversion in time. - */ - tsc_clk = clk_get(NULL, "sys_tsc_clk"); - if (!IS_ERR(tsc_clk)) { - error = clk_set_rate(tsc_clk, 5000000); - WARN_ON(error < 0); - clk_put(tsc_clk); - } - - platform_device_register(&edma_device); - platform_device_register(&tnetv107x_wdt_device); - platform_device_register(&tsc_device); - - if (info->serial_config) - davinci_serial_init(tnetv107x_serial_device); - - for (i = 0; i < 2; i++) - if (info->mmc_config[i]) { - mmc_devices[i].dev.platform_data = info->mmc_config[i]; - platform_device_register(&mmc_devices[i]); - } - - for (i = 0; i < 4; i++) - if (info->nand_config[i]) - nand_init(i, info->nand_config[i]); - - if (info->keypad_config) { - keypad_device.dev.platform_data = info->keypad_config; - platform_device_register(&keypad_device); - } - - if (info->ssp_config) { - ssp_device.dev.platform_data = info->ssp_config; - platform_device_register(&ssp_device); - } -} diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 111573c0aad..6257aa45256 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -302,7 +302,7 @@ static struct resource wdt_resources[] = { }; struct platform_device davinci_wdt_device = { - .name = "watchdog", + .name = "davinci-wdt", .id = -1, .num_resources = ARRAY_SIZE(wdt_resources), .resource = wdt_resources, @@ -313,9 +313,22 @@ void davinci_restart(enum reboot_mode mode, const char *cmd) davinci_watchdog_reset(&davinci_wdt_device); } -static void davinci_init_wdt(void) +int davinci_init_wdt(void) { - platform_device_register(&davinci_wdt_device); + return platform_device_register(&davinci_wdt_device); +} + +static struct platform_device davinci_gpio_device = { + .name = "davinci_gpio", + .id = -1, +}; + +int davinci_gpio_register(struct resource *res, int size, void *pdata) +{ + davinci_gpio_device.resource = res; + davinci_gpio_device.num_resources = size; + davinci_gpio_device.dev.platform_data = pdata; + return platform_device_register(&davinci_gpio_device); } /*-------------------------------------------------------------------------*/ @@ -335,16 +348,3 @@ struct davinci_timer_instance davinci_timer_instance[2] = { }, }; -/*-------------------------------------------------------------------------*/ - -static int __init davinci_init_devices(void) -{ - /* please keep these calls, and their implementations above, - * in alphabetical order so they're easier to sort through. - */ - davinci_init_wdt(); - - return 0; -} -arch_initcall(davinci_init_devices); - diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 3eaa5f6b216..2f3ed3a58d5 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -13,8 +13,10 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> - #include <linux/spi/spi.h> +#include <linux/platform_data/edma.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/spi-davinci.h> #include <asm/mach/map.h> @@ -25,9 +27,6 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <linux/platform_data/spi-davinci.h> -#include <mach/gpio-davinci.h> -#include <linux/platform_data/edma.h> #include "davinci.h" #include "clock.h" @@ -376,7 +375,7 @@ static struct clk_lookup dm355_clks[] = { CLK(NULL, "pwm3", &pwm3_clk), CLK(NULL, "timer0", &timer0_clk), CLK(NULL, "timer1", &timer1_clk), - CLK("watchdog", NULL, &timer2_clk), + CLK("davinci-wdt", NULL, &timer2_clk), CLK(NULL, "timer3", &timer3_clk), CLK(NULL, "rto", &rto_clk), CLK(NULL, "usb", &usb_clk), @@ -570,14 +569,6 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ static s8 -queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {-1, -1}, -}; - -static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -586,12 +577,6 @@ queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = queue_tc_mapping, .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, }; @@ -642,6 +627,7 @@ static struct platform_device dm355_edma_device = { static struct resource dm355_asp1_resources[] = { { + .name = "mpu", .start = DAVINCI_ASP1_BASE, .end = DAVINCI_ASP1_BASE + SZ_8K - 1, .flags = IORESOURCE_MEM, @@ -886,6 +872,29 @@ static struct platform_device dm355_vpbe_dev = { }, }; +static struct resource dm355_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DM355_GPIOBNK0, + .end = IRQ_DM355_GPIOBNK6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm355_gpio_platform_data = { + .ngpio = 104, +}; + +int __init dm355_gpio_register(void) +{ + return davinci_gpio_register(dm355_gpio_resources, + ARRAY_SIZE(dm355_gpio_resources), + &dm355_gpio_platform_data); +} /*----------------------------------------------------------------------*/ static struct map_desc dm355_io_desc[] = { @@ -1005,10 +1014,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .intc_irq_prios = dm355_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm355_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 104, - .gpio_irq = IRQ_DM355_GPIOBNK0, .sram_dma = 0x00010000, .sram_len = SZ_32K, }; @@ -1057,12 +1062,18 @@ int __init dm355_init_video(struct vpfe_config *vpfe_cfg, static int __init dm355_init_devices(void) { + int ret = 0; + if (!cpu_is_davinci_dm355()) return 0; davinci_cfg_reg(DM355_INT_EDMA_CC); platform_device_register(&dm355_edma_device); - return 0; + ret = davinci_init_wdt(); + if (ret) + pr_warn("%s: watchdog init failed: %d\n", __func__, ret); + + return ret; } postcore_initcall(dm355_init_devices); diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index c29e324eb0b..0ae8114f5cc 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -19,6 +19,9 @@ #include <linux/dma-mapping.h> #include <linux/spi/spi.h> #include <linux/platform_data/edma.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/keyscan-davinci.h> +#include <linux/platform_data/spi-davinci.h> #include <asm/mach/map.h> @@ -29,9 +32,6 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <linux/platform_data/keyscan-davinci.h> -#include <linux/platform_data/spi-davinci.h> -#include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" @@ -473,7 +473,7 @@ static struct clk_lookup dm365_clks[] = { CLK(NULL, "pwm3", &pwm3_clk), CLK(NULL, "timer0", &timer0_clk), CLK(NULL, "timer1", &timer1_clk), - CLK("watchdog", NULL, &timer2_clk), + CLK("davinci-wdt", NULL, &timer2_clk), CLK(NULL, "timer3", &timer3_clk), CLK(NULL, "usb", &usb_clk), CLK("davinci_emac.1", NULL, &emac_clk), @@ -698,6 +698,31 @@ void __init dm365_init_spi0(unsigned chipselect_mask, platform_device_register(&dm365_spi0_device); } +static struct resource dm365_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DM365_GPIO0, + .end = IRQ_DM365_GPIO7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm365_gpio_platform_data = { + .ngpio = 104, + .gpio_unbanked = 8, +}; + +int __init dm365_gpio_register(void) +{ + return davinci_gpio_register(dm365_gpio_resources, + ARRAY_SIZE(dm365_gpio_resources), + &dm365_gpio_platform_data); +} + static struct emac_platform_data dm365_emac_pdata = { .ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET, @@ -828,16 +853,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { /* Four Transfer Controllers on DM365 */ static s8 -dm365_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {2, 2}, - {3, 3}, - {-1, -1}, -}; - -static s8 dm365_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 7}, @@ -848,12 +863,6 @@ dm365_queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 256, - .n_tc = 4, - .n_cc = 1, - .queue_tc_mapping = dm365_queue_tc_mapping, .queue_priority_mapping = dm365_queue_priority_mapping, .default_queue = EVENTQ_3, }; @@ -916,6 +925,7 @@ static struct platform_device dm365_edma_device = { static struct resource dm365_asp_resources[] = { { + .name = "mpu", .start = DAVINCI_DM365_ASP0_BASE, .end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1, .flags = IORESOURCE_MEM, @@ -1105,11 +1115,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = { .intc_irq_prios = dm365_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm365_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 104, - .gpio_irq = IRQ_DM365_GPIO0, - .gpio_unbanked = 8, /* really 16 ... skip muxed GPIOs */ .emac_pdata = &dm365_emac_pdata, .sram_dma = 0x00010000, .sram_len = SZ_32K, @@ -1415,6 +1420,8 @@ int __init dm365_init_video(struct vpfe_config *vpfe_cfg, static int __init dm365_init_devices(void) { + int ret = 0; + if (!cpu_is_davinci_dm365()) return 0; @@ -1424,6 +1431,10 @@ static int __init dm365_init_devices(void) platform_device_register(&dm365_mdio_device); platform_device_register(&dm365_emac_device); - return 0; + ret = davinci_init_wdt(); + if (ret) + pr_warn("%s: watchdog init failed: %d\n", __func__, ret); + + return ret; } postcore_initcall(dm365_init_devices); diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 4f74682293d..dc52657909c 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -13,6 +13,7 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/platform_data/edma.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> @@ -23,7 +24,6 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" @@ -322,7 +322,7 @@ static struct clk_lookup dm644x_clks[] = { CLK(NULL, "pwm2", &pwm2_clk), CLK(NULL, "timer0", &timer0_clk), CLK(NULL, "timer1", &timer1_clk), - CLK("watchdog", NULL, &timer2_clk), + CLK("davinci-wdt", NULL, &timer2_clk), CLK(NULL, NULL, NULL), }; @@ -499,14 +499,6 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ static s8 -queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {-1, -1}, -}; - -static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -515,12 +507,6 @@ queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = queue_tc_mapping, .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, }; @@ -572,6 +558,7 @@ static struct platform_device dm644x_edma_device = { /* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */ static struct resource dm644x_asp_resources[] = { { + .name = "mpu", .start = DAVINCI_ASP0_BASE, .end = DAVINCI_ASP0_BASE + SZ_8K - 1, .flags = IORESOURCE_MEM, @@ -771,6 +758,29 @@ static struct platform_device dm644x_vpbe_dev = { }, }; +static struct resource dm644_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_GPIOBNK0, + .end = IRQ_GPIOBNK4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm644_gpio_platform_data = { + .ngpio = 71, +}; + +int __init dm644x_gpio_register(void) +{ + return davinci_gpio_register(dm644_gpio_resources, + ARRAY_SIZE(dm644_gpio_resources), + &dm644_gpio_platform_data); +} /*----------------------------------------------------------------------*/ static struct map_desc dm644x_io_desc[] = { @@ -897,10 +907,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .intc_irq_prios = dm644x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm644x_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 71, - .gpio_irq = IRQ_GPIOBNK0, .emac_pdata = &dm644x_emac_pdata, .sram_dma = 0x00008000, .sram_len = SZ_16K, @@ -944,6 +950,8 @@ int __init dm644x_init_video(struct vpfe_config *vpfe_cfg, static int __init dm644x_init_devices(void) { + int ret = 0; + if (!cpu_is_davinci_dm644x()) return 0; @@ -952,6 +960,10 @@ static int __init dm644x_init_devices(void) platform_device_register(&dm644x_mdio_device); platform_device_register(&dm644x_emac_device); - return 0; + ret = davinci_init_wdt(); + if (ret) + pr_warn("%s: watchdog init failed: %d\n", __func__, ret); + + return ret; } postcore_initcall(dm644x_init_devices); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 68f8d1f1aca..6c3bbea7d77 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -14,6 +14,7 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/platform_data/edma.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> @@ -24,7 +25,6 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" @@ -356,7 +356,7 @@ static struct clk_lookup dm646x_clks[] = { CLK(NULL, "pwm1", &pwm1_clk), CLK(NULL, "timer0", &timer0_clk), CLK(NULL, "timer1", &timer1_clk), - CLK("watchdog", NULL, &timer2_clk), + CLK("davinci-wdt", NULL, &timer2_clk), CLK("palm_bk3710", NULL, &ide_clk), CLK(NULL, "vpif0", &vpif0_clk), CLK(NULL, "vpif1", &vpif1_clk), @@ -533,16 +533,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /* Four Transfer Controllers on DM646x */ static s8 -dm646x_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {2, 2}, - {3, 3}, - {-1, -1}, -}; - -static s8 dm646x_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 4}, @@ -553,12 +543,6 @@ dm646x_queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 6, /* 0-1, 4-7 */ - .n_slot = 512, - .n_tc = 4, - .n_cc = 1, - .queue_tc_mapping = dm646x_queue_tc_mapping, .queue_priority_mapping = dm646x_queue_priority_mapping, .default_queue = EVENTQ_1, }; @@ -621,7 +605,7 @@ static struct platform_device dm646x_edma_device = { static struct resource dm646x_mcasp0_resources[] = { { - .name = "mcasp0", + .name = "mpu", .start = DAVINCI_DM646X_MCASP0_REG_BASE, .end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, @@ -641,7 +625,7 @@ static struct resource dm646x_mcasp0_resources[] = { static struct resource dm646x_mcasp1_resources[] = { { - .name = "mcasp1", + .name = "mpu", .start = DAVINCI_DM646X_MCASP1_REG_BASE, .end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, @@ -748,6 +732,29 @@ static struct platform_device vpif_capture_dev = { .num_resources = ARRAY_SIZE(vpif_capture_resource), }; +static struct resource dm646x_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DM646X_GPIOBNK0, + .end = IRQ_DM646X_GPIOBNK2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm646x_gpio_platform_data = { + .ngpio = 43, +}; + +int __init dm646x_gpio_register(void) +{ + return davinci_gpio_register(dm646x_gpio_resources, + ARRAY_SIZE(dm646x_gpio_resources), + &dm646x_gpio_platform_data); +} /*----------------------------------------------------------------------*/ static struct map_desc dm646x_io_desc[] = { @@ -874,10 +881,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .intc_irq_prios = dm646x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm646x_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 43, /* Only 33 usable */ - .gpio_irq = IRQ_DM646X_GPIOBNK0, .emac_pdata = &dm646x_emac_pdata, .sram_dma = 0x10010000, .sram_len = SZ_32K, @@ -936,12 +939,18 @@ void __init dm646x_init(void) static int __init dm646x_init_devices(void) { + int ret = 0; + if (!cpu_is_davinci_dm646x()) return 0; platform_device_register(&dm646x_mdio_device); platform_device_register(&dm646x_emac_device); - return 0; + ret = davinci_init_wdt(); + if (ret) + pr_warn("%s: watchdog init failed: %d\n", __func__, ret); + + return ret; } postcore_initcall(dm646x_init_devices); diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h index 957fb87e832..1fc84e21664 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -33,7 +33,6 @@ struct davinci_id { #define DAVINCI_CPU_ID_DM365 0x03650000 #define DAVINCI_CPU_ID_DA830 0x08300000 #define DAVINCI_CPU_ID_DA850 0x08500000 -#define DAVINCI_CPU_ID_TNETV107X 0x0b8a0000 #define IS_DAVINCI_CPU(type, id) \ static inline int is_davinci_ ##type(void) \ @@ -47,7 +46,6 @@ IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355) IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365) IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830) IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850) -IS_DAVINCI_CPU(tnetv107x, DAVINCI_CPU_ID_TNETV107X) #ifdef CONFIG_ARCH_DAVINCI_DM644x #define cpu_is_davinci_dm644x() is_davinci_dm644x() @@ -85,10 +83,4 @@ IS_DAVINCI_CPU(tnetv107x, DAVINCI_CPU_ID_TNETV107X) #define cpu_is_davinci_da850() 0 #endif -#ifdef CONFIG_ARCH_DAVINCI_TNETV107X -#define cpu_is_davinci_tnetv107x() is_davinci_tnetv107x() -#else -#define cpu_is_davinci_tnetv107x() 0 -#endif - #endif diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index aae53072c0e..39e58b48e82 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -97,6 +97,7 @@ int da8xx_register_mmcsd0(struct davinci_mmc_config *config); int da850_register_mmcsd1(struct davinci_mmc_config *config); void da8xx_register_mcasp(int id, struct snd_platform_data *pdata); int da8xx_register_rtc(void); +int da8xx_register_gpio(void *pdata); int da850_register_cpufreq(char *async_clk); int da8xx_register_cpuidle(void); void __iomem *da8xx_get_mem_ctlr(void); @@ -110,6 +111,8 @@ int da850_register_vpif_capture void da8xx_restart(enum reboot_mode mode, const char *cmd); void da8xx_rproc_reserve_cma(void); int da8xx_register_rproc(void); +int da850_register_gpio(void); +int da830_register_gpio(void); extern struct platform_device da8xx_serial_device[]; extern struct emac_platform_data da8xx_emac_pdata; diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h deleted file mode 100644 index 1fdd1fd3544..00000000000 --- a/arch/arm/mach-davinci/include/mach/gpio-davinci.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DAVINCI_DAVINCI_GPIO_H -#define __DAVINCI_DAVINCI_GPIO_H - -#include <linux/io.h> -#include <linux/spinlock.h> - -#include <asm-generic/gpio.h> - -#include <mach/irqs.h> -#include <mach/common.h> - -#define DAVINCI_GPIO_BASE 0x01C67000 - -enum davinci_gpio_type { - GPIO_TYPE_DAVINCI = 0, - GPIO_TYPE_TNETV107X, -}; - -/* - * basic gpio routines - * - * board-specific init should be done by arch/.../.../board-XXX.c (maybe - * initializing banks together) rather than boot loaders; kexec() won't - * go through boot loaders. - * - * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX registers to be sure those pins are - * used as gpios, not with other peripherals. - * - * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code may write GPIO(N). These may be - * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip - * may not support all the GPIOs in that range. - * - * GPIOs can also be on external chips, numbered after the ones built-in - * to the DaVinci chip. For now, they won't be usable as IRQ sources. - */ -#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ - -/* Convert GPIO signal to GPIO pin number */ -#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) - -struct davinci_gpio_controller { - struct gpio_chip chip; - int irq_base; - spinlock_t lock; - void __iomem *regs; - void __iomem *set_data; - void __iomem *clr_data; - void __iomem *in_data; -}; - -/* The __gpio_to_controller() and __gpio_mask() functions inline to constants - * with constant parameters; or in outlined code they execute at runtime. - * - * You'd access the controller directly when reading or writing more than - * one gpio value at a time, and to support wired logic where the value - * being driven by the cpu need not match the value read back. - * - * These are NOT part of the cross-platform GPIO interface - */ -static inline struct davinci_gpio_controller * -__gpio_to_controller(unsigned gpio) -{ - struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs; - int index = gpio / 32; - - if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num) - return NULL; - - return ctlrs + index; -} - -static inline u32 __gpio_mask(unsigned gpio) -{ - return 1 << (gpio % 32); -} - -#endif /* __DAVINCI_DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h deleted file mode 100644 index 960e9de47e1..00000000000 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DAVINCI_GPIO_H -#define __DAVINCI_GPIO_H - -#include <asm-generic/gpio.h> - -#define __ARM_GPIOLIB_COMPLEX - -/* The inline versions use the static inlines in the driver header */ -#include "gpio-davinci.h" - -/* - * The get/set/clear functions will inline when called with constant - * parameters referencing built-in GPIOs, for low-overhead bitbanging. - * - * gpio_set_value() will inline only on traditional Davinci style controllers - * with distinct set/clear registers. - * - * Otherwise, calls with variable parameters or referencing external - * GPIOs (e.g. on GPIO expander chips) use outlined functions. - */ -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) { - struct davinci_gpio_controller *ctlr; - u32 mask; - - ctlr = __gpio_to_controller(gpio); - - if (ctlr->set_data != ctlr->clr_data) { - mask = __gpio_mask(gpio); - if (value) - __raw_writel(mask, ctlr->set_data); - else - __raw_writel(mask, ctlr->clr_data); - return; - } - } - - __gpio_set_value(gpio, value); -} - -/* Returns zero or nonzero; works for gpios configured as inputs OR - * as outputs, at least for built-in GPIOs. - * - * NOTE: for built-in GPIOs, changes in reported values are synchronized - * to the GPIO clock. This is easily seen after calling gpio_set_value() - * and then immediately gpio_get_value(), where the gpio_get_value() will - * return the old value until the GPIO clock ticks and the new value gets - * latched. - */ -static inline int gpio_get_value(unsigned gpio) -{ - struct davinci_gpio_controller *ctlr; - - if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num) - return __gpio_get_value(gpio); - - ctlr = __gpio_to_controller(gpio); - return __gpio_mask(gpio) & __raw_readl(ctlr->in_data); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num) - return 0; - else - return __gpio_cansleep(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - /* don't support the reverse mapping */ - return -ENOSYS; -} - -#endif /* __DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index ec76c7775c2..354af71798d 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -401,103 +401,6 @@ #define DA850_N_CP_INTC_IRQ 101 - -/* TNETV107X specific interrupts */ -#define IRQ_TNETV107X_TDM1_TXDMA 0 -#define IRQ_TNETV107X_EXT_INT_0 1 -#define IRQ_TNETV107X_EXT_INT_1 2 -#define IRQ_TNETV107X_GPIO_INT12 3 -#define IRQ_TNETV107X_GPIO_INT13 4 -#define IRQ_TNETV107X_TIMER_0_TINT12 5 -#define IRQ_TNETV107X_TIMER_1_TINT12 6 -#define IRQ_TNETV107X_UART0 7 -#define IRQ_TNETV107X_TDM1_RXDMA 8 -#define IRQ_TNETV107X_MCDMA_INT0 9 -#define IRQ_TNETV107X_MCDMA_INT1 10 -#define IRQ_TNETV107X_TPCC 11 -#define IRQ_TNETV107X_TPCC_INT0 12 -#define IRQ_TNETV107X_TPCC_INT1 13 -#define IRQ_TNETV107X_TPCC_INT2 14 -#define IRQ_TNETV107X_TPCC_INT3 15 -#define IRQ_TNETV107X_TPTC0 16 -#define IRQ_TNETV107X_TPTC1 17 -#define IRQ_TNETV107X_TIMER_0_TINT34 18 -#define IRQ_TNETV107X_ETHSS 19 -#define IRQ_TNETV107X_TIMER_1_TINT34 20 -#define IRQ_TNETV107X_DSP2ARM_INT0 21 -#define IRQ_TNETV107X_DSP2ARM_INT1 22 -#define IRQ_TNETV107X_ARM_NPMUIRQ 23 -#define IRQ_TNETV107X_USB1 24 -#define IRQ_TNETV107X_VLYNQ 25 -#define IRQ_TNETV107X_UART0_DMATX 26 -#define IRQ_TNETV107X_UART0_DMARX 27 -#define IRQ_TNETV107X_TDM1_TXMCSP 28 -#define IRQ_TNETV107X_SSP 29 -#define IRQ_TNETV107X_MCDMA_INT2 30 -#define IRQ_TNETV107X_MCDMA_INT3 31 -#define IRQ_TNETV107X_TDM_CODECIF_EOT 32 -#define IRQ_TNETV107X_IMCOP_SQR_ARM 33 -#define IRQ_TNETV107X_USB0 34 -#define IRQ_TNETV107X_USB_CDMA 35 -#define IRQ_TNETV107X_LCD 36 -#define IRQ_TNETV107X_KEYPAD 37 -#define IRQ_TNETV107X_KEYPAD_FREE 38 -#define IRQ_TNETV107X_RNG 39 -#define IRQ_TNETV107X_PKA 40 -#define IRQ_TNETV107X_TDM0_TXDMA 41 -#define IRQ_TNETV107X_TDM0_RXDMA 42 -#define IRQ_TNETV107X_TDM0_TXMCSP 43 -#define IRQ_TNETV107X_TDM0_RXMCSP 44 -#define IRQ_TNETV107X_TDM1_RXMCSP 45 -#define IRQ_TNETV107X_SDIO1 46 -#define IRQ_TNETV107X_SDIO0 47 -#define IRQ_TNETV107X_TSC 48 -#define IRQ_TNETV107X_TS 49 -#define IRQ_TNETV107X_UART1 50 -#define IRQ_TNETV107X_MBX_LITE 51 -#define IRQ_TNETV107X_GPIO_INT00 52 -#define IRQ_TNETV107X_GPIO_INT01 53 -#define IRQ_TNETV107X_GPIO_INT02 54 -#define IRQ_TNETV107X_GPIO_INT03 55 -#define IRQ_TNETV107X_UART2 56 -#define IRQ_TNETV107X_UART2_DMATX 57 -#define IRQ_TNETV107X_UART2_DMARX 58 -#define IRQ_TNETV107X_IMCOP_IMX 59 -#define IRQ_TNETV107X_IMCOP_VLCD 60 -#define IRQ_TNETV107X_AES 61 -#define IRQ_TNETV107X_DES 62 -#define IRQ_TNETV107X_SHAMD5 63 -#define IRQ_TNETV107X_TPCC_ERR 68 -#define IRQ_TNETV107X_TPCC_PROT 69 -#define IRQ_TNETV107X_TPTC0_ERR 70 -#define IRQ_TNETV107X_TPTC1_ERR 71 -#define IRQ_TNETV107X_UART0_ERR 72 -#define IRQ_TNETV107X_UART1_ERR 73 -#define IRQ_TNETV107X_AEMIF_ERR 74 -#define IRQ_TNETV107X_DDR_ERR 75 -#define IRQ_TNETV107X_WDTARM_INT0 76 -#define IRQ_TNETV107X_MCDMA_ERR 77 -#define IRQ_TNETV107X_GPIO_ERR 78 -#define IRQ_TNETV107X_MPU_ADDR 79 -#define IRQ_TNETV107X_MPU_PROT 80 -#define IRQ_TNETV107X_IOPU_ADDR 81 -#define IRQ_TNETV107X_IOPU_PROT 82 -#define IRQ_TNETV107X_KEYPAD_ADDR_ERR 83 -#define IRQ_TNETV107X_WDT0_ADDR_ERR 84 -#define IRQ_TNETV107X_WDT1_ADDR_ERR 85 -#define IRQ_TNETV107X_CLKCTL_ADDR_ERR 86 -#define IRQ_TNETV107X_PLL_UNLOCK 87 -#define IRQ_TNETV107X_WDTDSP_INT0 88 -#define IRQ_TNETV107X_SEC_CTRL_VIOLATION 89 -#define IRQ_TNETV107X_KEY_MNG_VIOLATION 90 -#define IRQ_TNETV107X_PBIST_CPU 91 -#define IRQ_TNETV107X_WDTARM 92 -#define IRQ_TNETV107X_PSC 93 -#define IRQ_TNETV107X_MMC0 94 -#define IRQ_TNETV107X_MMC1 95 - -#define TNETV107X_N_CP_INTC_IRQ 96 - /* da850 currently has the most gpio pins (144) */ #define DAVINCI_N_GPIO 144 /* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */ diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index 9e95b8a1edb..631655e68ae 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -972,275 +972,6 @@ enum davinci_da850_index { DA850_VPIF_CLKO3, }; -enum davinci_tnetv107x_index { - TNETV107X_ASR_A00, - TNETV107X_GPIO32, - TNETV107X_ASR_A01, - TNETV107X_GPIO33, - TNETV107X_ASR_A02, - TNETV107X_GPIO34, - TNETV107X_ASR_A03, - TNETV107X_GPIO35, - TNETV107X_ASR_A04, - TNETV107X_GPIO36, - TNETV107X_ASR_A05, - TNETV107X_GPIO37, - TNETV107X_ASR_A06, - TNETV107X_GPIO38, - TNETV107X_ASR_A07, - TNETV107X_GPIO39, - TNETV107X_ASR_A08, - TNETV107X_GPIO40, - TNETV107X_ASR_A09, - TNETV107X_GPIO41, - TNETV107X_ASR_A10, - TNETV107X_GPIO42, - TNETV107X_ASR_A11, - TNETV107X_BOOT_STRP_0, - TNETV107X_ASR_A12, - TNETV107X_BOOT_STRP_1, - TNETV107X_ASR_A13, - TNETV107X_GPIO43, - TNETV107X_ASR_A14, - TNETV107X_GPIO44, - TNETV107X_ASR_A15, - TNETV107X_GPIO45, - TNETV107X_ASR_A16, - TNETV107X_GPIO46, - TNETV107X_ASR_A17, - TNETV107X_GPIO47, - TNETV107X_ASR_A18, - TNETV107X_GPIO48, - TNETV107X_SDIO1_DATA3_0, - TNETV107X_ASR_A19, - TNETV107X_GPIO49, - TNETV107X_SDIO1_DATA2_0, - TNETV107X_ASR_A20, - TNETV107X_GPIO50, - TNETV107X_SDIO1_DATA1_0, - TNETV107X_ASR_A21, - TNETV107X_GPIO51, - TNETV107X_SDIO1_DATA0_0, - TNETV107X_ASR_A22, - TNETV107X_GPIO52, - TNETV107X_SDIO1_CMD_0, - TNETV107X_ASR_A23, - TNETV107X_GPIO53, - TNETV107X_SDIO1_CLK_0, - TNETV107X_ASR_BA_1, - TNETV107X_GPIO54, - TNETV107X_SYS_PLL_CLK, - TNETV107X_ASR_CS0, - TNETV107X_ASR_CS1, - TNETV107X_ASR_CS2, - TNETV107X_TDM_PLL_CLK, - TNETV107X_ASR_CS3, - TNETV107X_ETH_PHY_CLK, - TNETV107X_ASR_D00, - TNETV107X_GPIO55, - TNETV107X_ASR_D01, - TNETV107X_GPIO56, - TNETV107X_ASR_D02, - TNETV107X_GPIO57, - TNETV107X_ASR_D03, - TNETV107X_GPIO58, - TNETV107X_ASR_D04, - TNETV107X_GPIO59_0, - TNETV107X_ASR_D05, - TNETV107X_GPIO60_0, - TNETV107X_ASR_D06, - TNETV107X_GPIO61_0, - TNETV107X_ASR_D07, - TNETV107X_GPIO62_0, - TNETV107X_ASR_D08, - TNETV107X_GPIO63_0, - TNETV107X_ASR_D09, - TNETV107X_GPIO64_0, - TNETV107X_ASR_D10, - TNETV107X_SDIO1_DATA3_1, - TNETV107X_ASR_D11, - TNETV107X_SDIO1_DATA2_1, - TNETV107X_ASR_D12, - TNETV107X_SDIO1_DATA1_1, - TNETV107X_ASR_D13, - TNETV107X_SDIO1_DATA0_1, - TNETV107X_ASR_D14, - TNETV107X_SDIO1_CMD_1, - TNETV107X_ASR_D15, - TNETV107X_SDIO1_CLK_1, - TNETV107X_ASR_OE, - TNETV107X_BOOT_STRP_2, - TNETV107X_ASR_RNW, - TNETV107X_GPIO29_0, - TNETV107X_ASR_WAIT, - TNETV107X_GPIO30_0, - TNETV107X_ASR_WE, - TNETV107X_BOOT_STRP_3, - TNETV107X_ASR_WE_DQM0, - TNETV107X_GPIO31, - TNETV107X_LCD_PD17_0, - TNETV107X_ASR_WE_DQM1, - TNETV107X_ASR_BA0_0, - TNETV107X_VLYNQ_CLK, - TNETV107X_GPIO14, - TNETV107X_LCD_PD19_0, - TNETV107X_VLYNQ_RXD0, - TNETV107X_GPIO15, - TNETV107X_LCD_PD20_0, - TNETV107X_VLYNQ_RXD1, - TNETV107X_GPIO16, - TNETV107X_LCD_PD21_0, - TNETV107X_VLYNQ_TXD0, - TNETV107X_GPIO17, - TNETV107X_LCD_PD22_0, - TNETV107X_VLYNQ_TXD1, - TNETV107X_GPIO18, - TNETV107X_LCD_PD23_0, - TNETV107X_SDIO0_CLK, - TNETV107X_GPIO19, - TNETV107X_SDIO0_CMD, - TNETV107X_GPIO20, - TNETV107X_SDIO0_DATA0, - TNETV107X_GPIO21, - TNETV107X_SDIO0_DATA1, - TNETV107X_GPIO22, - TNETV107X_SDIO0_DATA2, - TNETV107X_GPIO23, - TNETV107X_SDIO0_DATA3, - TNETV107X_GPIO24, - TNETV107X_EMU0, - TNETV107X_EMU1, - TNETV107X_RTCK, - TNETV107X_TRST_N, - TNETV107X_TCK, - TNETV107X_TDI, - TNETV107X_TDO, - TNETV107X_TMS, - TNETV107X_TDM1_CLK, - TNETV107X_TDM1_RX, - TNETV107X_TDM1_TX, - TNETV107X_TDM1_FS, - TNETV107X_KEYPAD_R0, - TNETV107X_KEYPAD_R1, - TNETV107X_KEYPAD_R2, - TNETV107X_KEYPAD_R3, - TNETV107X_KEYPAD_R4, - TNETV107X_KEYPAD_R5, - TNETV107X_KEYPAD_R6, - TNETV107X_GPIO12, - TNETV107X_KEYPAD_R7, - TNETV107X_GPIO10, - TNETV107X_KEYPAD_C0, - TNETV107X_KEYPAD_C1, - TNETV107X_KEYPAD_C2, - TNETV107X_KEYPAD_C3, - TNETV107X_KEYPAD_C4, - TNETV107X_KEYPAD_C5, - TNETV107X_KEYPAD_C6, - TNETV107X_GPIO13, - TNETV107X_TEST_CLK_IN, - TNETV107X_KEYPAD_C7, - TNETV107X_GPIO11, - TNETV107X_SSP0_0, - TNETV107X_SCC_DCLK, - TNETV107X_LCD_PD20_1, - TNETV107X_SSP0_1, - TNETV107X_SCC_CS_N, - TNETV107X_LCD_PD21_1, - TNETV107X_SSP0_2, - TNETV107X_SCC_D, - TNETV107X_LCD_PD22_1, - TNETV107X_SSP0_3, - TNETV107X_SCC_RESETN, - TNETV107X_LCD_PD23_1, - TNETV107X_SSP1_0, - TNETV107X_GPIO25, - TNETV107X_UART2_CTS, - TNETV107X_SSP1_1, - TNETV107X_GPIO26, - TNETV107X_UART2_RD, - TNETV107X_SSP1_2, - TNETV107X_GPIO27, - TNETV107X_UART2_RTS, - TNETV107X_SSP1_3, - TNETV107X_GPIO28, - TNETV107X_UART2_TD, - TNETV107X_UART0_CTS, - TNETV107X_UART0_RD, - TNETV107X_UART0_RTS, - TNETV107X_UART0_TD, - TNETV107X_UART1_RD, - TNETV107X_UART1_TD, - TNETV107X_LCD_AC_NCS, - TNETV107X_LCD_HSYNC_RNW, - TNETV107X_LCD_VSYNC_A0, - TNETV107X_LCD_MCLK, - TNETV107X_LCD_PD16_0, - TNETV107X_LCD_PCLK_E, - TNETV107X_LCD_PD00, - TNETV107X_LCD_PD01, - TNETV107X_LCD_PD02, - TNETV107X_LCD_PD03, - TNETV107X_LCD_PD04, - TNETV107X_LCD_PD05, - TNETV107X_LCD_PD06, - TNETV107X_LCD_PD07, - TNETV107X_LCD_PD08, - TNETV107X_GPIO59_1, - TNETV107X_LCD_PD09, - TNETV107X_GPIO60_1, - TNETV107X_LCD_PD10, - TNETV107X_ASR_BA0_1, - TNETV107X_GPIO61_1, - TNETV107X_LCD_PD11, - TNETV107X_GPIO62_1, - TNETV107X_LCD_PD12, - TNETV107X_GPIO63_1, - TNETV107X_LCD_PD13, - TNETV107X_GPIO64_1, - TNETV107X_LCD_PD14, - TNETV107X_GPIO29_1, - TNETV107X_LCD_PD15, - TNETV107X_GPIO30_1, - TNETV107X_EINT0, - TNETV107X_GPIO08, - TNETV107X_EINT1, - TNETV107X_GPIO09, - TNETV107X_GPIO00, - TNETV107X_LCD_PD20_2, - TNETV107X_TDM_CLK_IN_2, - TNETV107X_GPIO01, - TNETV107X_LCD_PD21_2, - TNETV107X_24M_CLK_OUT_1, - TNETV107X_GPIO02, - TNETV107X_LCD_PD22_2, - TNETV107X_GPIO03, - TNETV107X_LCD_PD23_2, - TNETV107X_GPIO04, - TNETV107X_LCD_PD16_1, - TNETV107X_USB0_RXERR, - TNETV107X_GPIO05, - TNETV107X_LCD_PD17_1, - TNETV107X_TDM_CLK_IN_1, - TNETV107X_GPIO06, - TNETV107X_LCD_PD18, - TNETV107X_24M_CLK_OUT_2, - TNETV107X_GPIO07, - TNETV107X_LCD_PD19_1, - TNETV107X_USB1_RXERR, - TNETV107X_ETH_PLL_CLK, - TNETV107X_MDIO, - TNETV107X_MDC, - TNETV107X_AIC_MUTE_STAT_N, - TNETV107X_TDM0_CLK, - TNETV107X_AIC_HNS_EN_N, - TNETV107X_TDM0_FS, - TNETV107X_AIC_HDS_EN_STAT_N, - TNETV107X_TDM0_TX, - TNETV107X_AIC_HNF_EN_STAT_N, - TNETV107X_TDM0_RX, -}; - #define PINMUX(x) (4 * (x)) #ifdef CONFIG_DAVINCI_MUX diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 0a22710493f..99d47cfa301 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -182,53 +182,6 @@ #define DA8XX_LPSC1_CR_P3_SS 26 #define DA8XX_LPSC1_L3_CBA_RAM 31 -/* TNETV107X LPSC Assignments */ -#define TNETV107X_LPSC_ARM 0 -#define TNETV107X_LPSC_GEM 1 -#define TNETV107X_LPSC_DDR2_PHY 2 -#define TNETV107X_LPSC_TPCC 3 -#define TNETV107X_LPSC_TPTC0 4 -#define TNETV107X_LPSC_TPTC1 5 -#define TNETV107X_LPSC_RAM 6 -#define TNETV107X_LPSC_MBX_LITE 7 -#define TNETV107X_LPSC_LCD 8 -#define TNETV107X_LPSC_ETHSS 9 -#define TNETV107X_LPSC_AEMIF 10 -#define TNETV107X_LPSC_CHIP_CFG 11 -#define TNETV107X_LPSC_TSC 12 -#define TNETV107X_LPSC_ROM 13 -#define TNETV107X_LPSC_UART2 14 -#define TNETV107X_LPSC_PKTSEC 15 -#define TNETV107X_LPSC_SECCTL 16 -#define TNETV107X_LPSC_KEYMGR 17 -#define TNETV107X_LPSC_KEYPAD 18 -#define TNETV107X_LPSC_GPIO 19 -#define TNETV107X_LPSC_MDIO 20 -#define TNETV107X_LPSC_SDIO0 21 -#define TNETV107X_LPSC_UART0 22 -#define TNETV107X_LPSC_UART1 23 -#define TNETV107X_LPSC_TIMER0 24 -#define TNETV107X_LPSC_TIMER1 25 -#define TNETV107X_LPSC_WDT_ARM 26 -#define TNETV107X_LPSC_WDT_DSP 27 -#define TNETV107X_LPSC_SSP 28 -#define TNETV107X_LPSC_TDM0 29 -#define TNETV107X_LPSC_VLYNQ 30 -#define TNETV107X_LPSC_MCDMA 31 -#define TNETV107X_LPSC_USB0 32 -#define TNETV107X_LPSC_TDM1 33 -#define TNETV107X_LPSC_DEBUGSS 34 -#define TNETV107X_LPSC_ETHSS_RGMII 35 -#define TNETV107X_LPSC_SYSTEM 36 -#define TNETV107X_LPSC_IMCOP 37 -#define TNETV107X_LPSC_SPARE 38 -#define TNETV107X_LPSC_SDIO1 39 -#define TNETV107X_LPSC_USB1 40 -#define TNETV107X_LPSC_USBSS 41 -#define TNETV107X_LPSC_DDR2_EMIF1_VRST 42 -#define TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST 43 -#define TNETV107X_LPSC_MAX 44 - /* PSC register offsets */ #define EPCPR 0x070 #define PTCMD 0x120 diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 52b8571b2e7..d4b4aa87964 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -15,8 +15,6 @@ #include <mach/hardware.h> -#include <linux/platform_device.h> - #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) @@ -25,20 +23,14 @@ #define DA8XX_UART1_BASE (IO_PHYS + 0x10c000) #define DA8XX_UART2_BASE (IO_PHYS + 0x10d000) -#define TNETV107X_UART0_BASE 0x08108100 -#define TNETV107X_UART1_BASE 0x08088400 -#define TNETV107X_UART2_BASE 0x08108300 - -#define TNETV107X_UART0_VIRT IOMEM(0xfee08100) -#define TNETV107X_UART1_VIRT IOMEM(0xfed88400) -#define TNETV107X_UART2_VIRT IOMEM(0xfee08300) - /* DaVinci UART register offsets */ #define UART_DAVINCI_PWREMU 0x0c #define UART_DM646X_SCR 0x10 #define UART_DM646X_SCR_TX_WATERMARK 0x08 #ifndef __ASSEMBLY__ +#include <linux/platform_device.h> + extern int davinci_serial_init(struct platform_device *); #endif diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h deleted file mode 100644 index 9b885298f10..00000000000 --- a/arch/arm/mach-davinci/include/mach/timex.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * DaVinci timer defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* - * Alert: Not all timers of the DaVinci family run at a frequency of 27MHz, - * but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/ - * linux/jiffies.h) are not used directly in code. Currently none of the - * code relevant to DaVinci platform depends on these values directly. - */ -#define CLOCK_TICK_RATE 27000000 - -#endif /* __ASM_ARCH_TIMEX_H__ */ diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h deleted file mode 100644 index 494fcf5ccfe..00000000000 --- a/arch/arm/mach-davinci/include/mach/tnetv107x.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Texas Instruments TNETV107X SoC Specific Defines - * - * Copyright (C) 2010 Texas Instruments - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_ARCH_DAVINCI_TNETV107X_H -#define __ASM_ARCH_DAVINCI_TNETV107X_H - -#include <asm/sizes.h> - -#define TNETV107X_DDR_BASE 0x80000000 - -/* - * Fixed mapping for early init starts here. If low-level debug is enabled, - * this area also gets mapped via io_pg_offset and io_phys by the boot code. - * To fit in with the io_pg_offset calculation, the io base address selected - * here _must_ be a multiple of 2^20. - */ -#define TNETV107X_IO_BASE 0x08000000 -#define TNETV107X_IO_VIRT (IO_VIRT + SZ_1M) - -#define TNETV107X_N_GPIO 65 - -#ifndef __ASSEMBLY__ - -#include <linux/serial_8250.h> -#include <linux/input/matrix_keypad.h> -#include <linux/mfd/ti_ssp.h> -#include <linux/reboot.h> - -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/mtd-davinci.h> -#include <mach/serial.h> - -struct tnetv107x_device_info { - struct davinci_mmc_config *mmc_config[2]; /* 2 controllers */ - struct davinci_nand_pdata *nand_config[4]; /* 4 chipsels */ - struct matrix_keypad_platform_data *keypad_config; - struct ti_ssp_data *ssp_config; -}; - -extern struct platform_device tnetv107x_wdt_device; -extern struct platform_device tnetv107x_serial_device[]; - -extern void tnetv107x_init(void); -extern void tnetv107x_devices_init(struct tnetv107x_device_info *); -extern void tnetv107x_irq_init(void); -void tnetv107x_restart(enum reboot_mode mode, const char *cmd); - -#endif - -#endif /* __ASM_ARCH_DAVINCI_TNETV107X_H */ diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index f49c2916aa3..8fb97b93b6b 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -68,9 +68,6 @@ static inline void set_uart_info(u32 phys) #define DEBUG_LL_DA8XX(machine, port) \ _DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE) -#define DEBUG_LL_TNETV107X(machine, port) \ - _DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE) - static inline void __arch_decomp_setup(unsigned long arch_id) { /* @@ -94,9 +91,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_DA8XX(davinci_da850_evm, 2); DEBUG_LL_DA8XX(mityomapl138, 1); DEBUG_LL_DA8XX(omapl138_hawkboard, 2); - - /* TNETV107x boards */ - DEBUG_LL_TNETV107X(tnetv107x, 1); } while (0); } diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index f18928b073f..8540dddf1fb 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -25,7 +25,6 @@ struct gen_pool *sram_get_gen_pool(void) void *sram_alloc(size_t len, dma_addr_t *dma) { - unsigned long vaddr; dma_addr_t dma_base = davinci_soc_info.sram_dma; if (dma) @@ -33,13 +32,7 @@ void *sram_alloc(size_t len, dma_addr_t *dma) if (!sram_pool || (dma && !dma_base)) return NULL; - vaddr = gen_pool_alloc(sram_pool, len); - if (!vaddr) - return NULL; - - if (dma) - *dma = gen_pool_virt_to_phys(sram_pool, vaddr); - return (void *)vaddr; + return gen_pool_dma_alloc(sram_pool, len, dma); } EXPORT_SYMBOL(sram_alloc); diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 7a55b5c9597..24ad30f32ae 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -181,7 +181,7 @@ static struct timer_s timers[] = { .name = "clockevent", .opts = TIMER_OPTS_DISABLED, .irqaction = { - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = timer_interrupt, } }, @@ -190,7 +190,7 @@ static struct timer_s timers[] = { .period = ~0, .opts = TIMER_OPTS_PERIODIC, .irqaction = { - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = freerun_interrupt, } }, @@ -285,7 +285,7 @@ static struct clocksource clocksource_davinci = { /* * Overwrite weak default sched_clock with something more precise */ -static u32 notrace davinci_read_sched_clock(void) +static u64 notrace davinci_read_sched_clock(void) { return timer32_read(&timers[TID_CLOCKSOURCE]); } @@ -331,7 +331,6 @@ static void davinci_set_mode(enum clock_event_mode mode, static struct clock_event_device clockevent_davinci = { .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .set_next_event = davinci_set_next_event, .set_mode = davinci_set_mode, }; @@ -392,19 +391,15 @@ void __init davinci_timer_init(void) davinci_clock_tick_rate)) printk(err, clocksource_davinci.name); - setup_sched_clock(davinci_read_sched_clock, 32, + sched_clock_register(davinci_read_sched_clock, 32, davinci_clock_tick_rate); /* setup clockevent */ clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id]; - clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, - clockevent_davinci.shift); - clockevent_davinci.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_davinci); - clockevent_davinci.min_delta_ns = 50000; /* 50 usec */ clockevent_davinci.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_davinci); + clockevents_config_and_register(&clockevent_davinci, + davinci_clock_tick_rate, 1, 0xfffffffe); for (i=0; i< ARRAY_SIZE(timers); i++) timer32_config(&timers[i]); diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c deleted file mode 100644 index f4d7fbb24b3..00000000000 --- a/arch/arm/mach-davinci/tnetv107x.c +++ /dev/null @@ -1,766 +0,0 @@ -/* - * Texas Instruments TNETV107X SoC Support - * - * Copyright (C) 2010 Texas Instruments - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/reboot.h> - -#include <asm/mach/map.h> - -#include <mach/common.h> -#include <mach/time.h> -#include <mach/cputype.h> -#include <mach/psc.h> -#include <mach/cp_intc.h> -#include <mach/irqs.h> -#include <mach/hardware.h> -#include <mach/tnetv107x.h> -#include <mach/gpio-davinci.h> - -#include "clock.h" -#include "mux.h" - -/* Base addresses for on-chip devices */ -#define TNETV107X_INTC_BASE 0x03000000 -#define TNETV107X_TIMER0_BASE 0x08086500 -#define TNETV107X_TIMER1_BASE 0x08086600 -#define TNETV107X_CHIP_CFG_BASE 0x08087000 -#define TNETV107X_GPIO_BASE 0x08088000 -#define TNETV107X_CLOCK_CONTROL_BASE 0x0808a000 -#define TNETV107X_PSC_BASE 0x0808b000 - -/* Reference clock frequencies */ -#define OSC_FREQ_ONCHIP (24000 * 1000) -#define OSC_FREQ_OFFCHIP_SYS (25000 * 1000) -#define OSC_FREQ_OFFCHIP_ETH (25000 * 1000) -#define OSC_FREQ_OFFCHIP_TDM (19200 * 1000) - -#define N_PLLS 3 - -/* Clock Control Registers */ -struct clk_ctrl_regs { - u32 pll_bypass; - u32 _reserved0; - u32 gem_lrst; - u32 _reserved1; - u32 pll_unlock_stat; - u32 sys_unlock; - u32 eth_unlock; - u32 tdm_unlock; -}; - -/* SSPLL Registers */ -struct sspll_regs { - u32 modes; - u32 post_div; - u32 pre_div; - u32 mult_factor; - u32 divider_range; - u32 bw_divider; - u32 spr_amount; - u32 spr_rate_div; - u32 diag; -}; - -/* Watchdog Timer Registers */ -struct wdt_regs { - u32 kick_lock; - u32 kick; - u32 change_lock; - u32 change ; - u32 disable_lock; - u32 disable; - u32 prescale_lock; - u32 prescale; -}; - -static struct clk_ctrl_regs __iomem *clk_ctrl_regs; - -static struct sspll_regs __iomem *sspll_regs[N_PLLS]; -static int sspll_regs_base[N_PLLS] = { 0x40, 0x80, 0xc0 }; - -/* PLL bypass bit shifts in clk_ctrl_regs->pll_bypass register */ -static u32 bypass_mask[N_PLLS] = { BIT(0), BIT(2), BIT(1) }; - -/* offchip (external) reference clock frequencies */ -static u32 pll_ext_freq[] = { - OSC_FREQ_OFFCHIP_SYS, - OSC_FREQ_OFFCHIP_TDM, - OSC_FREQ_OFFCHIP_ETH -}; - -/* PSC control registers */ -static u32 psc_regs[] = { TNETV107X_PSC_BASE }; - -/* Host map for interrupt controller */ -static u32 intc_host_map[] = { 0x01010000, 0x01010101, -1 }; - -static unsigned long clk_sspll_recalc(struct clk *clk); - -/* Level 1 - the PLLs */ -#define define_pll_clk(cname, pll, divmask, base) \ - static struct pll_data pll_##cname##_data = { \ - .num = pll, \ - .div_ratio_mask = divmask, \ - .phys_base = base + \ - TNETV107X_CLOCK_CONTROL_BASE, \ - }; \ - static struct clk pll_##cname##_clk = { \ - .name = "pll_" #cname "_clk", \ - .pll_data = &pll_##cname##_data, \ - .flags = CLK_PLL, \ - .recalc = clk_sspll_recalc, \ - } - -define_pll_clk(sys, 0, 0x1ff, 0x600); -define_pll_clk(tdm, 1, 0x0ff, 0x200); -define_pll_clk(eth, 2, 0x0ff, 0x400); - -/* Level 2 - divided outputs from the PLLs */ -#define define_pll_div_clk(pll, cname, div) \ - static struct clk pll##_##cname##_clk = { \ - .name = #pll "_" #cname "_clk", \ - .parent = &pll_##pll##_clk, \ - .flags = CLK_PLL, \ - .div_reg = PLLDIV##div, \ - .set_rate = davinci_set_sysclk_rate, \ - } - -define_pll_div_clk(sys, arm1176, 1); -define_pll_div_clk(sys, dsp, 2); -define_pll_div_clk(sys, ddr, 3); -define_pll_div_clk(sys, full, 4); -define_pll_div_clk(sys, lcd, 5); -define_pll_div_clk(sys, vlynq_ref, 6); -define_pll_div_clk(sys, tsc, 7); -define_pll_div_clk(sys, half, 8); - -define_pll_div_clk(eth, 5mhz, 1); -define_pll_div_clk(eth, 50mhz, 2); -define_pll_div_clk(eth, 125mhz, 3); -define_pll_div_clk(eth, 250mhz, 4); -define_pll_div_clk(eth, 25mhz, 5); - -define_pll_div_clk(tdm, 0, 1); -define_pll_div_clk(tdm, extra, 2); -define_pll_div_clk(tdm, 1, 3); - - -/* Level 3 - LPSC gated clocks */ -#define __lpsc_clk(cname, _parent, mod, flg) \ - static struct clk clk_##cname = { \ - .name = #cname, \ - .parent = &_parent, \ - .lpsc = TNETV107X_LPSC_##mod,\ - .flags = flg, \ - } - -#define lpsc_clk_enabled(cname, parent, mod) \ - __lpsc_clk(cname, parent, mod, ALWAYS_ENABLED) - -#define lpsc_clk(cname, parent, mod) \ - __lpsc_clk(cname, parent, mod, 0) - -lpsc_clk_enabled(arm, sys_arm1176_clk, ARM); -lpsc_clk_enabled(gem, sys_dsp_clk, GEM); -lpsc_clk_enabled(ddr2_phy, sys_ddr_clk, DDR2_PHY); -lpsc_clk_enabled(tpcc, sys_full_clk, TPCC); -lpsc_clk_enabled(tptc0, sys_full_clk, TPTC0); -lpsc_clk_enabled(tptc1, sys_full_clk, TPTC1); -lpsc_clk_enabled(ram, sys_full_clk, RAM); -lpsc_clk_enabled(aemif, sys_full_clk, AEMIF); -lpsc_clk_enabled(chipcfg, sys_half_clk, CHIP_CFG); -lpsc_clk_enabled(rom, sys_half_clk, ROM); -lpsc_clk_enabled(secctl, sys_half_clk, SECCTL); -lpsc_clk_enabled(keymgr, sys_half_clk, KEYMGR); -lpsc_clk_enabled(gpio, sys_half_clk, GPIO); -lpsc_clk_enabled(debugss, sys_half_clk, DEBUGSS); -lpsc_clk_enabled(system, sys_half_clk, SYSTEM); -lpsc_clk_enabled(ddr2_vrst, sys_ddr_clk, DDR2_EMIF1_VRST); -lpsc_clk_enabled(ddr2_vctl_rst, sys_ddr_clk, DDR2_EMIF2_VCTL_RST); -lpsc_clk_enabled(wdt_arm, sys_half_clk, WDT_ARM); -lpsc_clk_enabled(timer1, sys_half_clk, TIMER1); - -lpsc_clk(mbx_lite, sys_arm1176_clk, MBX_LITE); -lpsc_clk(ethss, eth_125mhz_clk, ETHSS); -lpsc_clk(tsc, sys_tsc_clk, TSC); -lpsc_clk(uart0, sys_half_clk, UART0); -lpsc_clk(uart1, sys_half_clk, UART1); -lpsc_clk(uart2, sys_half_clk, UART2); -lpsc_clk(pktsec, sys_half_clk, PKTSEC); -lpsc_clk(keypad, sys_half_clk, KEYPAD); -lpsc_clk(mdio, sys_half_clk, MDIO); -lpsc_clk(sdio0, sys_half_clk, SDIO0); -lpsc_clk(sdio1, sys_half_clk, SDIO1); -lpsc_clk(timer0, sys_half_clk, TIMER0); -lpsc_clk(wdt_dsp, sys_half_clk, WDT_DSP); -lpsc_clk(ssp, sys_half_clk, SSP); -lpsc_clk(tdm0, tdm_0_clk, TDM0); -lpsc_clk(tdm1, tdm_1_clk, TDM1); -lpsc_clk(vlynq, sys_vlynq_ref_clk, VLYNQ); -lpsc_clk(mcdma, sys_half_clk, MCDMA); -lpsc_clk(usbss, sys_half_clk, USBSS); -lpsc_clk(usb0, clk_usbss, USB0); -lpsc_clk(usb1, clk_usbss, USB1); -lpsc_clk(ethss_rgmii, eth_250mhz_clk, ETHSS_RGMII); -lpsc_clk(imcop, sys_dsp_clk, IMCOP); -lpsc_clk(spare, sys_half_clk, SPARE); - -/* LCD needs a full power down to clear controller state */ -__lpsc_clk(lcd, sys_lcd_clk, LCD, PSC_SWRSTDISABLE); - - -/* Level 4 - leaf clocks for LPSC modules shared across drivers */ -static struct clk clk_rng = { .name = "rng", .parent = &clk_pktsec }; -static struct clk clk_pka = { .name = "pka", .parent = &clk_pktsec }; - -static struct clk_lookup clks[] = { - CLK(NULL, "pll_sys_clk", &pll_sys_clk), - CLK(NULL, "pll_eth_clk", &pll_eth_clk), - CLK(NULL, "pll_tdm_clk", &pll_tdm_clk), - CLK(NULL, "sys_arm1176_clk", &sys_arm1176_clk), - CLK(NULL, "sys_dsp_clk", &sys_dsp_clk), - CLK(NULL, "sys_ddr_clk", &sys_ddr_clk), - CLK(NULL, "sys_full_clk", &sys_full_clk), - CLK(NULL, "sys_lcd_clk", &sys_lcd_clk), - CLK(NULL, "sys_vlynq_ref_clk", &sys_vlynq_ref_clk), - CLK(NULL, "sys_tsc_clk", &sys_tsc_clk), - CLK(NULL, "sys_half_clk", &sys_half_clk), - CLK(NULL, "eth_5mhz_clk", ð_5mhz_clk), - CLK(NULL, "eth_50mhz_clk", ð_50mhz_clk), - CLK(NULL, "eth_125mhz_clk", ð_125mhz_clk), - CLK(NULL, "eth_250mhz_clk", ð_250mhz_clk), - CLK(NULL, "eth_25mhz_clk", ð_25mhz_clk), - CLK(NULL, "tdm_0_clk", &tdm_0_clk), - CLK(NULL, "tdm_extra_clk", &tdm_extra_clk), - CLK(NULL, "tdm_1_clk", &tdm_1_clk), - CLK(NULL, "clk_arm", &clk_arm), - CLK(NULL, "clk_gem", &clk_gem), - CLK(NULL, "clk_ddr2_phy", &clk_ddr2_phy), - CLK(NULL, "clk_tpcc", &clk_tpcc), - CLK(NULL, "clk_tptc0", &clk_tptc0), - CLK(NULL, "clk_tptc1", &clk_tptc1), - CLK(NULL, "clk_ram", &clk_ram), - CLK(NULL, "clk_mbx_lite", &clk_mbx_lite), - CLK("tnetv107x-fb.0", NULL, &clk_lcd), - CLK(NULL, "clk_ethss", &clk_ethss), - CLK(NULL, "aemif", &clk_aemif), - CLK(NULL, "clk_chipcfg", &clk_chipcfg), - CLK("tnetv107x-ts.0", NULL, &clk_tsc), - CLK(NULL, "clk_rom", &clk_rom), - CLK("serial8250.2", NULL, &clk_uart2), - CLK(NULL, "clk_pktsec", &clk_pktsec), - CLK("tnetv107x-rng.0", NULL, &clk_rng), - CLK("tnetv107x-pka.0", NULL, &clk_pka), - CLK(NULL, "clk_secctl", &clk_secctl), - CLK(NULL, "clk_keymgr", &clk_keymgr), - CLK("tnetv107x-keypad.0", NULL, &clk_keypad), - CLK(NULL, "clk_gpio", &clk_gpio), - CLK(NULL, "clk_mdio", &clk_mdio), - CLK("dm6441-mmc.0", NULL, &clk_sdio0), - CLK("serial8250.0", NULL, &clk_uart0), - CLK("serial8250.1", NULL, &clk_uart1), - CLK(NULL, "timer0", &clk_timer0), - CLK(NULL, "timer1", &clk_timer1), - CLK("tnetv107x_wdt.0", NULL, &clk_wdt_arm), - CLK(NULL, "clk_wdt_dsp", &clk_wdt_dsp), - CLK("ti-ssp", NULL, &clk_ssp), - CLK(NULL, "clk_tdm0", &clk_tdm0), - CLK(NULL, "clk_vlynq", &clk_vlynq), - CLK(NULL, "clk_mcdma", &clk_mcdma), - CLK(NULL, "clk_usbss", &clk_usbss), - CLK(NULL, "clk_usb0", &clk_usb0), - CLK(NULL, "clk_usb1", &clk_usb1), - CLK(NULL, "clk_tdm1", &clk_tdm1), - CLK(NULL, "clk_debugss", &clk_debugss), - CLK(NULL, "clk_ethss_rgmii", &clk_ethss_rgmii), - CLK(NULL, "clk_system", &clk_system), - CLK(NULL, "clk_imcop", &clk_imcop), - CLK(NULL, "clk_spare", &clk_spare), - CLK("dm6441-mmc.1", NULL, &clk_sdio1), - CLK(NULL, "clk_ddr2_vrst", &clk_ddr2_vrst), - CLK(NULL, "clk_ddr2_vctl_rst", &clk_ddr2_vctl_rst), - CLK(NULL, NULL, NULL), -}; - -static const struct mux_config pins[] = { -#ifdef CONFIG_DAVINCI_MUX - MUX_CFG(TNETV107X, ASR_A00, 0, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO32, 0, 0, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A01, 0, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO33, 0, 5, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A02, 0, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO34, 0, 10, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A03, 0, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO35, 0, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A04, 0, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO36, 0, 20, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A05, 0, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO37, 0, 25, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A06, 1, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO38, 1, 0, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A07, 1, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO39, 1, 5, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A08, 1, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO40, 1, 10, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A09, 1, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO41, 1, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A10, 1, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO42, 1, 20, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A11, 1, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, BOOT_STRP_0, 1, 25, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A12, 2, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, BOOT_STRP_1, 2, 0, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A13, 2, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO43, 2, 5, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A14, 2, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO44, 2, 10, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A15, 2, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO45, 2, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A16, 2, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO46, 2, 20, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A17, 2, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO47, 2, 25, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_A18, 3, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO48, 3, 0, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, SDIO1_DATA3_0, 3, 0, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_A19, 3, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO49, 3, 5, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, SDIO1_DATA2_0, 3, 5, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_A20, 3, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO50, 3, 10, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, SDIO1_DATA1_0, 3, 10, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_A21, 3, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO51, 3, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, SDIO1_DATA0_0, 3, 15, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_A22, 3, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO52, 3, 20, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, SDIO1_CMD_0, 3, 20, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_A23, 3, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO53, 3, 25, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, SDIO1_CLK_0, 3, 25, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_BA_1, 4, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO54, 4, 0, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, SYS_PLL_CLK, 4, 0, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_CS0, 4, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, ASR_CS1, 4, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, ASR_CS2, 4, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TDM_PLL_CLK, 4, 15, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_CS3, 4, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, ETH_PHY_CLK, 4, 20, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, ASR_D00, 4, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO55, 4, 25, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D01, 5, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO56, 5, 0, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D02, 5, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO57, 5, 5, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D03, 5, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO58, 5, 10, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D04, 5, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO59_0, 5, 15, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D05, 5, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO60_0, 5, 20, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D06, 5, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO61_0, 5, 25, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D07, 6, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO62_0, 6, 0, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D08, 6, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO63_0, 6, 5, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D09, 6, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO64_0, 6, 10, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D10, 6, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, SDIO1_DATA3_1, 6, 15, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D11, 6, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, SDIO1_DATA2_1, 6, 20, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D12, 6, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, SDIO1_DATA1_1, 6, 25, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D13, 7, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, SDIO1_DATA0_1, 7, 0, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D14, 7, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, SDIO1_CMD_1, 7, 5, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_D15, 7, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, SDIO1_CLK_1, 7, 10, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_OE, 7, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, BOOT_STRP_2, 7, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_RNW, 7, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO29_0, 7, 20, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_WAIT, 7, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO30_0, 7, 25, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_WE, 8, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, BOOT_STRP_3, 8, 0, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, ASR_WE_DQM0, 8, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO31, 8, 5, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, LCD_PD17_0, 8, 5, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, ASR_WE_DQM1, 8, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, ASR_BA0_0, 8, 10, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, VLYNQ_CLK, 9, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO14, 9, 0, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, LCD_PD19_0, 9, 0, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, VLYNQ_RXD0, 9, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO15, 9, 5, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, LCD_PD20_0, 9, 5, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, VLYNQ_RXD1, 9, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO16, 9, 10, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, LCD_PD21_0, 9, 10, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, VLYNQ_TXD0, 9, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO17, 9, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, LCD_PD22_0, 9, 15, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, VLYNQ_TXD1, 9, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO18, 9, 20, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, LCD_PD23_0, 9, 20, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, SDIO0_CLK, 10, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO19, 10, 0, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, SDIO0_CMD, 10, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO20, 10, 5, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, SDIO0_DATA0, 10, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO21, 10, 10, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, SDIO0_DATA1, 10, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO22, 10, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, SDIO0_DATA2, 10, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO23, 10, 20, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, SDIO0_DATA3, 10, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO24, 10, 25, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, EMU0, 11, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, EMU1, 11, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, RTCK, 12, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TRST_N, 12, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TCK, 12, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TDI, 12, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TDO, 12, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TMS, 12, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TDM1_CLK, 13, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TDM1_RX, 13, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TDM1_TX, 13, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TDM1_FS, 13, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, KEYPAD_R0, 14, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, KEYPAD_R1, 14, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, KEYPAD_R2, 14, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, KEYPAD_R3, 14, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, KEYPAD_R4, 14, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, KEYPAD_R5, 14, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, KEYPAD_R6, 15, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO12, 15, 0, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, KEYPAD_R7, 15, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO10, 15, 5, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, KEYPAD_C0, 15, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, KEYPAD_C1, 15, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, KEYPAD_C2, 15, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, KEYPAD_C3, 15, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, KEYPAD_C4, 16, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, KEYPAD_C5, 16, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, KEYPAD_C6, 16, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO13, 16, 10, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, TEST_CLK_IN, 16, 10, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, KEYPAD_C7, 16, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO11, 16, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, SSP0_0, 17, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, SCC_DCLK, 17, 0, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, LCD_PD20_1, 17, 0, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, SSP0_1, 17, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, SCC_CS_N, 17, 5, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, LCD_PD21_1, 17, 5, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, SSP0_2, 17, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, SCC_D, 17, 10, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, LCD_PD22_1, 17, 10, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, SSP0_3, 17, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, SCC_RESETN, 17, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, LCD_PD23_1, 17, 15, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, SSP1_0, 18, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO25, 18, 0, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, UART2_CTS, 18, 0, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, SSP1_1, 18, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO26, 18, 5, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, UART2_RD, 18, 5, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, SSP1_2, 18, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO27, 18, 10, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, UART2_RTS, 18, 10, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, SSP1_3, 18, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO28, 18, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, UART2_TD, 18, 15, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, UART0_CTS, 19, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, UART0_RD, 19, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, UART0_RTS, 19, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, UART0_TD, 19, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, UART1_RD, 19, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, UART1_TD, 19, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_AC_NCS, 20, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_HSYNC_RNW, 20, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_VSYNC_A0, 20, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_MCLK, 20, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD16_0, 20, 15, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, LCD_PCLK_E, 20, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD00, 20, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD01, 21, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD02, 21, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD03, 21, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD04, 21, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD05, 21, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD06, 21, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD07, 22, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD08, 22, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO59_1, 22, 5, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, LCD_PD09, 22, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO60_1, 22, 10, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, LCD_PD10, 22, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, ASR_BA0_1, 22, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, GPIO61_1, 22, 15, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, LCD_PD11, 22, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO62_1, 22, 20, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, LCD_PD12, 22, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO63_1, 22, 25, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, LCD_PD13, 23, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO64_1, 23, 0, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, LCD_PD14, 23, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO29_1, 23, 5, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, LCD_PD15, 23, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO30_1, 23, 10, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, EINT0, 24, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO08, 24, 0, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, EINT1, 24, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, GPIO09, 24, 5, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, GPIO00, 24, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD20_2, 24, 10, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, TDM_CLK_IN_2, 24, 10, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, GPIO01, 24, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD21_2, 24, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, 24M_CLK_OUT_1, 24, 15, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, GPIO02, 24, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD22_2, 24, 20, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, GPIO03, 24, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD23_2, 24, 25, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, GPIO04, 25, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD16_1, 25, 0, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, USB0_RXERR, 25, 0, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, GPIO05, 25, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD17_1, 25, 5, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, TDM_CLK_IN_1, 25, 5, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, GPIO06, 25, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD18, 25, 10, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, 24M_CLK_OUT_2, 25, 10, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, GPIO07, 25, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, LCD_PD19_1, 25, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, USB1_RXERR, 25, 15, 0x1f, 0x0c, false) - MUX_CFG(TNETV107X, ETH_PLL_CLK, 25, 15, 0x1f, 0x1c, false) - MUX_CFG(TNETV107X, MDIO, 26, 0, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, MDC, 26, 5, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, AIC_MUTE_STAT_N, 26, 10, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TDM0_CLK, 26, 10, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, AIC_HNS_EN_N, 26, 15, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TDM0_FS, 26, 15, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, AIC_HDS_EN_STAT_N, 26, 20, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TDM0_TX, 26, 20, 0x1f, 0x04, false) - MUX_CFG(TNETV107X, AIC_HNF_EN_STAT_N, 26, 25, 0x1f, 0x00, false) - MUX_CFG(TNETV107X, TDM0_RX, 26, 25, 0x1f, 0x04, false) -#endif -}; - -/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static u8 irq_prios[TNETV107X_N_CP_INTC_IRQ] = { - /* fill in default priority 7 */ - [0 ... (TNETV107X_N_CP_INTC_IRQ - 1)] = 7, - /* now override as needed, e.g. [xxx] = 5 */ -}; - -/* Contents of JTAG ID register used to identify exact cpu type */ -static struct davinci_id ids[] = { - { - .variant = 0x0, - .part_no = 0xb8a1, - .manufacturer = 0x017, - .cpu_id = DAVINCI_CPU_ID_TNETV107X, - .name = "tnetv107x rev 1.0", - }, - { - .variant = 0x1, - .part_no = 0xb8a1, - .manufacturer = 0x017, - .cpu_id = DAVINCI_CPU_ID_TNETV107X, - .name = "tnetv107x rev 1.1/1.2", - }, -}; - -static struct davinci_timer_instance timer_instance[2] = { - { - .base = TNETV107X_TIMER0_BASE, - .bottom_irq = IRQ_TNETV107X_TIMER_0_TINT12, - .top_irq = IRQ_TNETV107X_TIMER_0_TINT34, - }, - { - .base = TNETV107X_TIMER1_BASE, - .bottom_irq = IRQ_TNETV107X_TIMER_1_TINT12, - .top_irq = IRQ_TNETV107X_TIMER_1_TINT34, - }, -}; - -static struct davinci_timer_info timer_info = { - .timers = timer_instance, - .clockevent_id = T0_BOT, - .clocksource_id = T0_TOP, -}; - -/* - * TNETV107X platforms do not use the static mappings from Davinci - * IO_PHYS/IO_VIRT. This SOC's interesting MMRs are at different addresses, - * and changing IO_PHYS would break away from existing Davinci SOCs. - * - * The primary impact of the current model is that IO_ADDRESS() is not to be - * used to map registers on TNETV107X. - * - * 1. The first chunk is for INTC: This needs to be mapped in via iotable - * because ioremap() does not seem to be operational at the time when - * irqs are initialized. Without this, consistent dma init bombs. - * - * 2. The second chunk maps in register areas that need to be populated into - * davinci_soc_info. Note that alignment restrictions come into play if - * low-level debug is enabled (see note in <mach/tnetv107x.h>). - */ -static struct map_desc io_desc[] = { - { /* INTC */ - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(TNETV107X_INTC_BASE), - .length = SZ_16K, - .type = MT_DEVICE - }, - { /* Most of the rest */ - .virtual = TNETV107X_IO_VIRT, - .pfn = __phys_to_pfn(TNETV107X_IO_BASE), - .length = IO_SIZE - SZ_1M, - .type = MT_DEVICE - }, -}; - -static unsigned long clk_sspll_recalc(struct clk *clk) -{ - int pll; - unsigned long mult = 0, prediv = 1, postdiv = 1; - unsigned long ref = OSC_FREQ_ONCHIP, ret; - u32 tmp; - - if (WARN_ON(!clk->pll_data)) - return clk->rate; - - if (!clk_ctrl_regs) { - void __iomem *tmp; - - tmp = ioremap(TNETV107X_CLOCK_CONTROL_BASE, SZ_4K); - - if (WARN(!tmp, "failed ioremap for clock control regs\n")) - return clk->parent ? clk->parent->rate : 0; - - for (pll = 0; pll < N_PLLS; pll++) - sspll_regs[pll] = tmp + sspll_regs_base[pll]; - - clk_ctrl_regs = tmp; - } - - pll = clk->pll_data->num; - - tmp = __raw_readl(&clk_ctrl_regs->pll_bypass); - if (!(tmp & bypass_mask[pll])) { - mult = __raw_readl(&sspll_regs[pll]->mult_factor); - prediv = __raw_readl(&sspll_regs[pll]->pre_div) + 1; - postdiv = __raw_readl(&sspll_regs[pll]->post_div) + 1; - } - - tmp = __raw_readl(clk->pll_data->base + PLLCTL); - if (tmp & PLLCTL_CLKMODE) - ref = pll_ext_freq[pll]; - - clk->pll_data->input_rate = ref; - - tmp = __raw_readl(clk->pll_data->base + PLLCTL); - if (!(tmp & PLLCTL_PLLEN)) - return ref; - - ret = ref; - if (mult) - ret += ((unsigned long long)ref * mult) / 256; - - ret /= (prediv * postdiv); - - return ret; -} - -static void tnetv107x_watchdog_reset(struct platform_device *pdev) -{ - struct wdt_regs __iomem *regs; - - regs = ioremap(pdev->resource[0].start, SZ_4K); - - /* disable watchdog */ - __raw_writel(0x7777, ®s->disable_lock); - __raw_writel(0xcccc, ®s->disable_lock); - __raw_writel(0xdddd, ®s->disable_lock); - __raw_writel(0, ®s->disable); - - /* program prescale */ - __raw_writel(0x5a5a, ®s->prescale_lock); - __raw_writel(0xa5a5, ®s->prescale_lock); - __raw_writel(0, ®s->prescale); - - /* program countdown */ - __raw_writel(0x6666, ®s->change_lock); - __raw_writel(0xbbbb, ®s->change_lock); - __raw_writel(1, ®s->change); - - /* enable watchdog */ - __raw_writel(0x7777, ®s->disable_lock); - __raw_writel(0xcccc, ®s->disable_lock); - __raw_writel(0xdddd, ®s->disable_lock); - __raw_writel(1, ®s->disable); - - /* kick */ - __raw_writel(0x5555, ®s->kick_lock); - __raw_writel(0xaaaa, ®s->kick_lock); - __raw_writel(1, ®s->kick); -} - -void tnetv107x_restart(enum reboot_mode mode, const char *cmd) -{ - tnetv107x_watchdog_reset(&tnetv107x_wdt_device); -} - -static struct davinci_soc_info tnetv107x_soc_info = { - .io_desc = io_desc, - .io_desc_num = ARRAY_SIZE(io_desc), - .ids = ids, - .ids_num = ARRAY_SIZE(ids), - .jtag_id_reg = TNETV107X_CHIP_CFG_BASE + 0x018, - .cpu_clks = clks, - .psc_bases = psc_regs, - .psc_bases_num = ARRAY_SIZE(psc_regs), - .pinmux_base = TNETV107X_CHIP_CFG_BASE + 0x150, - .pinmux_pins = pins, - .pinmux_pins_num = ARRAY_SIZE(pins), - .intc_type = DAVINCI_INTC_TYPE_CP_INTC, - .intc_base = TNETV107X_INTC_BASE, - .intc_irq_prios = irq_prios, - .intc_irq_num = TNETV107X_N_CP_INTC_IRQ, - .intc_host_map = intc_host_map, - .gpio_base = TNETV107X_GPIO_BASE, - .gpio_type = GPIO_TYPE_TNETV107X, - .gpio_num = TNETV107X_N_GPIO, - .timer_info = &timer_info, - .serial_dev = tnetv107x_serial_device, -}; - -void __init tnetv107x_init(void) -{ - davinci_common_init(&tnetv107x_soc_info); -} |