diff options
Diffstat (limited to 'arch/arm/mach-davinci/include')
33 files changed, 137 insertions, 1860 deletions
diff --git a/arch/arm/mach-davinci/include/mach/aemif.h b/arch/arm/mach-davinci/include/mach/aemif.h deleted file mode 100644 index 05b29344309..00000000000 --- a/arch/arm/mach-davinci/include/mach/aemif.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * TI DaVinci AEMIF support - * - * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ -#ifndef _MACH_DAVINCI_AEMIF_H -#define _MACH_DAVINCI_AEMIF_H - -#define NRCSR_OFFSET 0x00 -#define AWCCR_OFFSET 0x04 -#define A1CR_OFFSET 0x10 - -#define ACR_ASIZE_MASK 0x3 -#define ACR_EW_MASK BIT(30) -#define ACR_SS_MASK BIT(31) - -/* All timings in nanoseconds */ -struct davinci_aemif_timing { - u8 wsetup; - u8 wstrobe; - u8 whold; - - u8 rsetup; - u8 rstrobe; - u8 rhold; - - u8 ta; -}; - -int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, - void __iomem *base, unsigned cs); -#endif diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h deleted file mode 100644 index 9aa240909a2..00000000000 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * <mach/asp.h> - DaVinci Audio Serial Port support - */ -#ifndef __ASM_ARCH_DAVINCI_ASP_H -#define __ASM_ARCH_DAVINCI_ASP_H - -#include <mach/irqs.h> -#include <mach/edma.h> - -/* Bases of dm644x and dm355 register banks */ -#define DAVINCI_ASP0_BASE 0x01E02000 -#define DAVINCI_ASP1_BASE 0x01E04000 - -/* Bases of dm365 register banks */ -#define DAVINCI_DM365_ASP0_BASE 0x01D02000 - -/* Bases of dm646x register banks */ -#define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 -#define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 - -/* Bases of da850/da830 McASP0 register banks */ -#define DAVINCI_DA8XX_MCASP0_REG_BASE 0x01D00000 - -/* Bases of da830 McASP1 register banks */ -#define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000 - -/* EDMA channels of dm644x and dm355 */ -#define DAVINCI_DMA_ASP0_TX 2 -#define DAVINCI_DMA_ASP0_RX 3 -#define DAVINCI_DMA_ASP1_TX 8 -#define DAVINCI_DMA_ASP1_RX 9 - -/* EDMA channels of dm646x */ -#define DAVINCI_DM646X_DMA_MCASP0_AXEVT0 6 -#define DAVINCI_DM646X_DMA_MCASP0_AREVT0 9 -#define DAVINCI_DM646X_DMA_MCASP1_AXEVT1 12 - -/* EDMA channels of da850/da830 McASP0 */ -#define DAVINCI_DA8XX_DMA_MCASP0_AREVT 0 -#define DAVINCI_DA8XX_DMA_MCASP0_AXEVT 1 - -/* EDMA channels of da830 McASP1 */ -#define DAVINCI_DA830_DMA_MCASP1_AREVT 2 -#define DAVINCI_DA830_DMA_MCASP1_AXEVT 3 - -/* Interrupts */ -#define DAVINCI_ASP0_RX_INT IRQ_MBRINT -#define DAVINCI_ASP0_TX_INT IRQ_MBXINT -#define DAVINCI_ASP1_RX_INT IRQ_MBRINT -#define DAVINCI_ASP1_TX_INT IRQ_MBXINT - -struct snd_platform_data { - u32 tx_dma_offset; - u32 rx_dma_offset; - enum dma_event_q asp_chan_q; /* event queue number for ASP channel */ - enum dma_event_q ram_chan_q; /* event queue number for RAM channel */ - unsigned int codec_fmt; - /* - * Allowing this is more efficient and eliminates left and right swaps - * caused by underruns, but will swap the left and right channels - * when compared to previous behavior. - */ - unsigned enable_channel_combine:1; - unsigned sram_size_playback; - unsigned sram_size_capture; - - /* - * If McBSP peripheral gets the clock from an external pin, - * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR - * and MCBSP_CLKS. - * Depending on different hardware connections it is possible - * to use this setting to change the behaviour of McBSP - * driver. The dm365_clk_input_pin enum is available for dm365 - */ - int clk_input_pin; - - /* - * This flag works when both clock and FS are outputs for the cpu - * and makes clock more accurate (FS is not symmetrical and the - * clock is very fast. - * The clock becoming faster is named - * i2s continuous serial clock (I2S_SCK) and it is an externally - * visible bit clock. - * - * first line : WordSelect - * second line : ContinuousSerialClock - * third line: SerialData - * - * SYMMETRICAL APPROACH: - * _______________________ LEFT - * _| RIGHT |______________________| - * _ _ _ _ _ _ _ _ - * _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_ - * _ _ _ _ _ _ _ _ - * _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_ - * \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ - * - * ACCURATE CLOCK APPROACH: - * ______________ LEFT - * _| RIGHT |_______________________________| - * _ _ _ _ _ _ _ _ _ - * _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| | - * _ _ _ _ dummy cycles - * _/ \_ ... _/ \_/ \_ ... _/ \__________________ - * \_/ \_/ \_/ \_/ - * - */ - bool i2s_accurate_sck; - - /* McASP specific fields */ - int tdm_slots; - u8 op_mode; - u8 num_serializer; - u8 *serial_dir; - u8 version; - u8 txnumevt; - u8 rxnumevt; -}; - -enum { - MCASP_VERSION_1 = 0, /* DM646x */ - MCASP_VERSION_2, /* DA8xx/OMAPL1x */ -}; - -enum dm365_clk_input_pin { - MCBSP_CLKR = 0, /* DM365 */ - MCBSP_CLKS, -}; - -#define INACTIVE_MODE 0 -#define TX_MODE 1 -#define RX_MODE 2 - -#define DAVINCI_MCASP_IIS_MODE 0 -#define DAVINCI_MCASP_DIT_MODE 1 - -#endif /* __ASM_ARCH_DAVINCI_ASP_H */ diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h index a3b04021987..3e8af6a0b64 100644 --- a/arch/arm/mach-davinci/include/mach/clock.h +++ b/arch/arm/mach-davinci/include/mach/clock.h @@ -18,4 +18,7 @@ struct clk; extern int clk_register(struct clk *clk); extern void clk_unregister(struct clk *clk); +int davinci_clk_reset_assert(struct clk *c); +int davinci_clk_reset_deassert(struct clk *c); + #endif diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 5cd39a4e0c9..0b3c169758e 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -14,10 +14,9 @@ #include <linux/compiler.h> #include <linux/types.h> +#include <linux/reboot.h> -struct sys_timer; - -extern struct sys_timer davinci_timer; +extern void davinci_timer_init(void); extern void davinci_irq_init(void); extern void __iomem *davinci_intc_base; @@ -73,7 +72,6 @@ struct davinci_soc_info { unsigned gpio_unbanked; struct davinci_gpio_controller *gpio_ctlrs; int gpio_ctlrs_num; - struct platform_device *serial_dev; struct emac_platform_data *emac_pdata; dma_addr_t sram_dma; unsigned sram_len; @@ -83,10 +81,27 @@ extern struct davinci_soc_info davinci_soc_info; extern void davinci_common_init(struct davinci_soc_info *soc_info); extern void davinci_init_ide(void); -void davinci_restart(char mode, const char *cmd); +void davinci_restart(enum reboot_mode mode, const char *cmd); +void davinci_init_late(void); + +#ifdef CONFIG_DAVINCI_RESET_CLOCKS +int davinci_clk_disable_unused(void); +#else +static inline int davinci_clk_disable_unused(void) { return 0; } +#endif + +#ifdef CONFIG_CPU_FREQ +int davinci_cpufreq_init(void); +#else +static inline int davinci_cpufreq_init(void) { return 0; } +#endif + +#ifdef CONFIG_SUSPEND +int davinci_pm_init(void); +#else +static inline int davinci_pm_init(void) { return 0; } +#endif -/* standard place to map on-chip SRAMs; they *may* support DMA */ -#define SRAM_VIRT 0xfffe0000 #define SRAM_SIZE SZ_128K #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h index 4e8190eed67..827bbe9baed 100644 --- a/arch/arm/mach-davinci/include/mach/cp_intc.h +++ b/arch/arm/mach-davinci/include/mach/cp_intc.h @@ -51,6 +51,7 @@ #define CP_INTC_HOST_PRIO_VECTOR(n) (0x1600 + (n << 2)) #define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2)) -void __init cp_intc_init(void); +void cp_intc_init(void); +int cp_intc_of_init(struct device_node *, struct device_node *); #endif /* __ASM_HARDWARE_CP_INTC_H */ diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h index 957fb87e832..1fc84e21664 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -33,7 +33,6 @@ struct davinci_id { #define DAVINCI_CPU_ID_DM365 0x03650000 #define DAVINCI_CPU_ID_DA830 0x08300000 #define DAVINCI_CPU_ID_DA850 0x08500000 -#define DAVINCI_CPU_ID_TNETV107X 0x0b8a0000 #define IS_DAVINCI_CPU(type, id) \ static inline int is_davinci_ ##type(void) \ @@ -47,7 +46,6 @@ IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355) IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365) IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830) IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850) -IS_DAVINCI_CPU(tnetv107x, DAVINCI_CPU_ID_TNETV107X) #ifdef CONFIG_ARCH_DAVINCI_DM644x #define cpu_is_davinci_dm644x() is_davinci_dm644x() @@ -85,10 +83,4 @@ IS_DAVINCI_CPU(tnetv107x, DAVINCI_CPU_ID_TNETV107X) #define cpu_is_davinci_da850() 0 #endif -#ifdef CONFIG_ARCH_DAVINCI_TNETV107X -#define cpu_is_davinci_tnetv107x() is_davinci_tnetv107x() -#else -#define cpu_is_davinci_tnetv107x() 0 -#endif - #endif diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index ee3461d7ec1..39e58b48e82 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -16,15 +16,20 @@ #include <linux/platform_device.h> #include <linux/davinci_emac.h> #include <linux/spi/spi.h> +#include <linux/platform_data/davinci_asp.h> +#include <linux/reboot.h> +#include <linux/videodev2.h> #include <mach/serial.h> -#include <mach/edma.h> -#include <mach/i2c.h> -#include <mach/asp.h> -#include <mach/mmc.h> -#include <mach/usb.h> #include <mach/pm.h> -#include <mach/spi.h> +#include <linux/platform_data/edma.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/usb-davinci.h> +#include <linux/platform_data/spi-davinci.h> +#include <linux/platform_data/uio_pruss.h> + +#include <media/davinci/vpif_types.h> extern void __iomem *da8xx_syscfg0_base; extern void __iomem *da8xx_syscfg1_base; @@ -50,7 +55,10 @@ extern unsigned int da850_max_speed; #define DA8XX_SYSCFG0_BASE (IO_PHYS + 0x14000) #define DA8XX_SYSCFG0_VIRT(x) (da8xx_syscfg0_base + (x)) #define DA8XX_JTAG_ID_REG 0x18 +#define DA8XX_HOST1CFG_REG 0x44 +#define DA8XX_CHIPSIG_REG 0x174 #define DA8XX_CFGCHIP0_REG 0x17c +#define DA8XX_CFGCHIP1_REG 0x180 #define DA8XX_CFGCHIP2_REG 0x184 #define DA8XX_CFGCHIP3_REG 0x188 @@ -63,43 +71,54 @@ extern unsigned int da850_max_speed; #define DA8XX_PLL0_BASE 0x01c11000 #define DA8XX_TIMER64P0_BASE 0x01c20000 #define DA8XX_TIMER64P1_BASE 0x01c21000 +#define DA8XX_VPIF_BASE 0x01e17000 #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_PSC1_BASE 0x01e27000 #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 +#define DA8XX_SHARED_RAM_BASE 0x80000000 #define DA8XX_ARM_RAM_BASE 0xffff0000 -void __init da830_init(void); -void __init da850_init(void); +void da830_init(void); +void da850_init(void); int da830_register_edma(struct edma_rsv_info *rsv); int da850_register_edma(struct edma_rsv_info *rsv[2]); int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata); -int da8xx_register_spi(int instance, struct spi_board_info *info, unsigned len); +int da8xx_register_spi_bus(int instance, unsigned num_chipselect); int da8xx_register_watchdog(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_emac(void); +int da8xx_register_uio_pruss(void); int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); int da8xx_register_mmcsd0(struct davinci_mmc_config *config); int da850_register_mmcsd1(struct davinci_mmc_config *config); -void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata); +void da8xx_register_mcasp(int id, struct snd_platform_data *pdata); int da8xx_register_rtc(void); +int da8xx_register_gpio(void *pdata); int da850_register_cpufreq(char *async_clk); int da8xx_register_cpuidle(void); -void __iomem * __init da8xx_get_mem_ctlr(void); +void __iomem *da8xx_get_mem_ctlr(void); int da850_register_pm(struct platform_device *pdev); -int __init da850_register_sata(unsigned long refclkpn); -void da8xx_restart(char mode, const char *cmd); - -extern struct platform_device da8xx_serial_device; +int da850_register_sata(unsigned long refclkpn); +int da850_register_vpif(void); +int da850_register_vpif_display + (struct vpif_display_config *display_config); +int da850_register_vpif_capture + (struct vpif_capture_config *capture_config); +void da8xx_restart(enum reboot_mode mode, const char *cmd); +void da8xx_rproc_reserve_cma(void); +int da8xx_register_rproc(void); +int da850_register_gpio(void); +int da830_register_gpio(void); + +extern struct platform_device da8xx_serial_device[]; extern struct emac_platform_data da8xx_emac_pdata; extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata; extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata; -extern struct davinci_spi_platform_data da8xx_spi_pdata[]; -extern struct platform_device da8xx_wdt_device; extern const short da830_emif25_pins[]; extern const short da830_spi0_pins[]; @@ -125,6 +144,8 @@ extern const short da830_ecap1_pins[]; extern const short da830_ecap2_pins[]; extern const short da830_eqep0_pins[]; extern const short da830_eqep1_pins[]; +extern const short da850_vpif_capture_pins[]; +extern const short da850_vpif_display_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S deleted file mode 100644 index cf94552d527..00000000000 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Debugging macro for DaVinci - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* Modifications - * Jan 2009 Chaithrika U S Added senduart, busyuart, waituart - * macros, based on debug-8250.S file - * but using 32-bit accesses required for - * some davinci devices. - */ - -#include <linux/serial_reg.h> - -#include <mach/serial.h> - -#define UART_SHIFT 2 - - .pushsection .data -davinci_uart_phys: .word 0 -davinci_uart_virt: .word 0 - .popsection - - .macro addruart, rp, rv, tmp - - /* Use davinci_uart_phys/virt if already configured */ -10: adr \rp, 99f @ get effective addr of 99f - ldr \rv, [\rp] @ get absolute addr of 99f - sub \rv, \rv, \rp @ offset between the two - ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys - sub \tmp, \rp, \rv @ make it effective - ldr \rp, [\tmp, #0] @ davinci_uart_phys - ldr \rv, [\tmp, #4] @ davinci_uart_virt - cmp \rp, #0 @ is port configured? - cmpne \rv, #0 - bne 100f @ already configured - - /* Check the debug UART address set in uncompress.h */ - and \rp, pc, #0xff000000 - ldr \rv, =DAVINCI_UART_INFO_OFS - add \rp, \rp, \rv - - /* Copy uart phys address from decompressor uart info */ - ldr \rv, [\rp, #0] - str \rv, [\tmp, #0] - - /* Copy uart virt address from decompressor uart info */ - ldr \rv, [\rp, #4] - str \rv, [\tmp, #4] - - b 10b - - .align -99: .word . - .word davinci_uart_phys - .ltorg - -100: - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - .macro waituart,rd,rx -#ifdef FLOW_CONTROL -1001: ldr \rd, [\rx, #UART_MSR << UART_SHIFT] - tst \rd, #UART_MSR_CTS - beq 1001b -#endif - .endm - diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h deleted file mode 100644 index 36dff4a0ce3..00000000000 --- a/arch/arm/mach-davinci/include/mach/dm355.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Chip specific defines for DM355 SoC - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) Deep Root Systems, LLC. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_DM355_H -#define __ASM_ARCH_DM355_H - -#include <mach/hardware.h> -#include <mach/asp.h> -#include <media/davinci/vpfe_capture.h> - -#define DM355_ASYNC_EMIF_CONTROL_BASE 0x01E10000 -#define DM355_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 - -#define ASP1_TX_EVT_EN 1 -#define ASP1_RX_EVT_EN 2 - -struct spi_board_info; - -void __init dm355_init(void); -void dm355_init_spi0(unsigned chipselect_mask, - struct spi_board_info *info, unsigned len); -void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); -void dm355_set_vpfe_config(struct vpfe_config *cfg); - -#endif /* __ASM_ARCH_DM355_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h deleted file mode 100644 index 2563bf4e93a..00000000000 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_ARCH_DM365_H -#define __ASM_ARCH_DM665_H - -#include <linux/platform_device.h> -#include <linux/davinci_emac.h> -#include <mach/hardware.h> -#include <mach/asp.h> -#include <mach/keyscan.h> -#include <media/davinci/vpfe_capture.h> - -#define DM365_EMAC_BASE (0x01D07000) -#define DM365_EMAC_MDIO_BASE (DM365_EMAC_BASE + 0x4000) -#define DM365_EMAC_CNTRL_OFFSET (0x0000) -#define DM365_EMAC_CNTRL_MOD_OFFSET (0x3000) -#define DM365_EMAC_CNTRL_RAM_OFFSET (0x1000) -#define DM365_EMAC_CNTRL_RAM_SIZE (0x2000) - -/* Base of key scan register bank */ -#define DM365_KEYSCAN_BASE (0x01C69400) - -#define DM365_RTC_BASE (0x01C69000) - -#define DAVINCI_DM365_VC_BASE (0x01D0C000) -#define DAVINCI_DMA_VC_TX 2 -#define DAVINCI_DMA_VC_RX 3 - -#define DM365_ASYNC_EMIF_CONTROL_BASE 0x01D10000 -#define DM365_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -#define DM365_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 - -void __init dm365_init(void); -void __init dm365_init_asp(struct snd_platform_data *pdata); -void __init dm365_init_vc(struct snd_platform_data *pdata); -void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); -void __init dm365_init_rtc(void); -void dm365_init_spi0(unsigned chipselect_mask, - struct spi_board_info *info, unsigned len); - -void dm365_set_vpfe_config(struct vpfe_config *cfg); -#endif /* __ASM_ARCH_DM365_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h deleted file mode 100644 index 5a1b26d4e68..00000000000 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file contains the processor specific definitions - * of the TI DM644x. - * - * Copyright (C) 2008 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef __ASM_ARCH_DM644X_H -#define __ASM_ARCH_DM644X_H - -#include <linux/davinci_emac.h> -#include <mach/hardware.h> -#include <mach/asp.h> -#include <media/davinci/vpfe_capture.h> - -#define DM644X_EMAC_BASE (0x01C80000) -#define DM644X_EMAC_MDIO_BASE (DM644X_EMAC_BASE + 0x4000) -#define DM644X_EMAC_CNTRL_OFFSET (0x0000) -#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) -#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) -#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) - -#define DM644X_ASYNC_EMIF_CONTROL_BASE 0x01E00000 -#define DM644X_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -#define DM644X_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 -#define DM644X_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 -#define DM644X_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 - -void __init dm644x_init(void); -void __init dm644x_init_asp(struct snd_platform_data *pdata); -void dm644x_set_vpfe_config(struct vpfe_config *cfg); - -#endif /* __ASM_ARCH_DM644X_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h deleted file mode 100644 index a8ee6c9f0bb..00000000000 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Chip specific defines for DM646x SoC - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) Deep Root Systems, LLC. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_DM646X_H -#define __ASM_ARCH_DM646X_H - -#include <mach/hardware.h> -#include <mach/asp.h> -#include <linux/i2c.h> -#include <linux/videodev2.h> -#include <linux/davinci_emac.h> -#include <media/davinci/vpif_types.h> - -#define DM646X_EMAC_BASE (0x01C80000) -#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000) -#define DM646X_EMAC_CNTRL_OFFSET (0x0000) -#define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000) -#define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000) -#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000) - -#define DM646X_ASYNC_EMIF_CONTROL_BASE 0x20008000 -#define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000 - -void __init dm646x_init(void); -void __init dm646x_init_mcasp0(struct snd_platform_data *pdata); -void __init dm646x_init_mcasp1(struct snd_platform_data *pdata); -int __init dm646x_init_edma(struct edma_rsv_info *rsv); - -void dm646x_video_init(void); - -void dm646x_setup_vpif(struct vpif_display_config *, - struct vpif_capture_config *); - -#endif /* __ASM_ARCH_DM646X_H */ diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h deleted file mode 100644 index 20c77f29bf0..00000000000 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ /dev/null @@ -1,262 +0,0 @@ -/* - * TI DAVINCI dma definitions - * - * Copyright (C) 2006-2009 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -/* - * This EDMA3 programming framework exposes two basic kinds of resource: - * - * Channel Triggers transfers, usually from a hardware event but - * also manually or by "chaining" from DMA completions. - * Each channel is coupled to a Parameter RAM (PaRAM) slot. - * - * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM - * "set"), source and destination addresses, a link to a - * next PaRAM slot (if any), options for the transfer, and - * instructions for updating those addresses. There are - * more than twice as many slots as event channels. - * - * Each PaRAM set describes a sequence of transfers, either for one large - * buffer or for several discontiguous smaller buffers. An EDMA transfer - * is driven only from a channel, which performs the transfers specified - * in its PaRAM slot until there are no more transfers. When that last - * transfer completes, the "link" field may be used to reload the channel's - * PaRAM slot with a new transfer descriptor. - * - * The EDMA Channel Controller (CC) maps requests from channels into physical - * Transfer Controller (TC) requests when the channel triggers (by hardware - * or software events, or by chaining). The two physical DMA channels provided - * by the TCs are thus shared by many logical channels. - * - * DaVinci hardware also has a "QDMA" mechanism which is not currently - * supported through this interface. (DSP firmware uses it though.) - */ - -#ifndef EDMA_H_ -#define EDMA_H_ - -/* PaRAM slots are laid out like this */ -struct edmacc_param { - unsigned int opt; - unsigned int src; - unsigned int a_b_cnt; - unsigned int dst; - unsigned int src_dst_bidx; - unsigned int link_bcntrld; - unsigned int src_dst_cidx; - unsigned int ccnt; -}; - -#define CCINT0_INTERRUPT 16 -#define CCERRINT_INTERRUPT 17 -#define TCERRINT0_INTERRUPT 18 -#define TCERRINT1_INTERRUPT 19 - -/* fields in edmacc_param.opt */ -#define SAM BIT(0) -#define DAM BIT(1) -#define SYNCDIM BIT(2) -#define STATIC BIT(3) -#define EDMA_FWID (0x07 << 8) -#define TCCMODE BIT(11) -#define EDMA_TCC(t) ((t) << 12) -#define TCINTEN BIT(20) -#define ITCINTEN BIT(21) -#define TCCHEN BIT(22) -#define ITCCHEN BIT(23) - -#define TRWORD (0x7<<2) -#define PAENTRY (0x1ff<<5) - -/* Drivers should avoid using these symbolic names for dm644x - * channels, and use platform_device IORESOURCE_DMA resources - * instead. (Other DaVinci chips have different peripherals - * and thus have different DMA channel mappings.) - */ -#define DAVINCI_DMA_MCBSP_TX 2 -#define DAVINCI_DMA_MCBSP_RX 3 -#define DAVINCI_DMA_VPSS_HIST 4 -#define DAVINCI_DMA_VPSS_H3A 5 -#define DAVINCI_DMA_VPSS_PRVU 6 -#define DAVINCI_DMA_VPSS_RSZ 7 -#define DAVINCI_DMA_IMCOP_IMXINT 8 -#define DAVINCI_DMA_IMCOP_VLCDINT 9 -#define DAVINCI_DMA_IMCO_PASQINT 10 -#define DAVINCI_DMA_IMCOP_DSQINT 11 -#define DAVINCI_DMA_SPI_SPIX 16 -#define DAVINCI_DMA_SPI_SPIR 17 -#define DAVINCI_DMA_UART0_URXEVT0 18 -#define DAVINCI_DMA_UART0_UTXEVT0 19 -#define DAVINCI_DMA_UART1_URXEVT1 20 -#define DAVINCI_DMA_UART1_UTXEVT1 21 -#define DAVINCI_DMA_UART2_URXEVT2 22 -#define DAVINCI_DMA_UART2_UTXEVT2 23 -#define DAVINCI_DMA_MEMSTK_MSEVT 24 -#define DAVINCI_DMA_MMCRXEVT 26 -#define DAVINCI_DMA_MMCTXEVT 27 -#define DAVINCI_DMA_I2C_ICREVT 28 -#define DAVINCI_DMA_I2C_ICXEVT 29 -#define DAVINCI_DMA_GPIO_GPINT0 32 -#define DAVINCI_DMA_GPIO_GPINT1 33 -#define DAVINCI_DMA_GPIO_GPINT2 34 -#define DAVINCI_DMA_GPIO_GPINT3 35 -#define DAVINCI_DMA_GPIO_GPINT4 36 -#define DAVINCI_DMA_GPIO_GPINT5 37 -#define DAVINCI_DMA_GPIO_GPINT6 38 -#define DAVINCI_DMA_GPIO_GPINT7 39 -#define DAVINCI_DMA_GPIO_GPBNKINT0 40 -#define DAVINCI_DMA_GPIO_GPBNKINT1 41 -#define DAVINCI_DMA_GPIO_GPBNKINT2 42 -#define DAVINCI_DMA_GPIO_GPBNKINT3 43 -#define DAVINCI_DMA_GPIO_GPBNKINT4 44 -#define DAVINCI_DMA_TIMER0_TINT0 48 -#define DAVINCI_DMA_TIMER1_TINT1 49 -#define DAVINCI_DMA_TIMER2_TINT2 50 -#define DAVINCI_DMA_TIMER3_TINT3 51 -#define DAVINCI_DMA_PWM0 52 -#define DAVINCI_DMA_PWM1 53 -#define DAVINCI_DMA_PWM2 54 - -/* DA830 specific EDMA3 information */ -#define EDMA_DA830_NUM_DMACH 32 -#define EDMA_DA830_NUM_TCC 32 -#define EDMA_DA830_NUM_PARAMENTRY 128 -#define EDMA_DA830_NUM_EVQUE 2 -#define EDMA_DA830_NUM_TC 2 -#define EDMA_DA830_CHMAP_EXIST 0 -#define EDMA_DA830_NUM_REGIONS 4 -#define DA830_DMACH2EVENT_MAP0 0x000FC03Fu -#define DA830_DMACH2EVENT_MAP1 0x00000000u -#define DA830_EDMA_ARM_OWN 0x30FFCCFFu - -/*ch_status paramater of callback function possible values*/ -#define DMA_COMPLETE 1 -#define DMA_CC_ERROR 2 -#define DMA_TC1_ERROR 3 -#define DMA_TC2_ERROR 4 - -enum address_mode { - INCR = 0, - FIFO = 1 -}; - -enum fifo_width { - W8BIT = 0, - W16BIT = 1, - W32BIT = 2, - W64BIT = 3, - W128BIT = 4, - W256BIT = 5 -}; - -enum dma_event_q { - EVENTQ_0 = 0, - EVENTQ_1 = 1, - EVENTQ_2 = 2, - EVENTQ_3 = 3, - EVENTQ_DEFAULT = -1 -}; - -enum sync_dimension { - ASYNC = 0, - ABSYNC = 1 -}; - -#define EDMA_CTLR_CHAN(ctlr, chan) (((ctlr) << 16) | (chan)) -#define EDMA_CTLR(i) ((i) >> 16) -#define EDMA_CHAN_SLOT(i) ((i) & 0xffff) - -#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ -#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ -#define EDMA_CONT_PARAMS_ANY 1001 -#define EDMA_CONT_PARAMS_FIXED_EXACT 1002 -#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003 - -#define EDMA_MAX_CC 2 - -/* alloc/free DMA channels and their dedicated parameter RAM slots */ -int edma_alloc_channel(int channel, - void (*callback)(unsigned channel, u16 ch_status, void *data), - void *data, enum dma_event_q); -void edma_free_channel(unsigned channel); - -/* alloc/free parameter RAM slots */ -int edma_alloc_slot(unsigned ctlr, int slot); -void edma_free_slot(unsigned slot); - -/* alloc/free a set of contiguous parameter RAM slots */ -int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count); -int edma_free_cont_slots(unsigned slot, int count); - -/* calls that operate on part of a parameter RAM slot */ -void edma_set_src(unsigned slot, dma_addr_t src_port, - enum address_mode mode, enum fifo_width); -void edma_set_dest(unsigned slot, dma_addr_t dest_port, - enum address_mode mode, enum fifo_width); -void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst); -void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); -void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); -void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, - u16 bcnt_rld, enum sync_dimension sync_mode); -void edma_link(unsigned from, unsigned to); -void edma_unlink(unsigned from); - -/* calls that operate on an entire parameter RAM slot */ -void edma_write_slot(unsigned slot, const struct edmacc_param *params); -void edma_read_slot(unsigned slot, struct edmacc_param *params); - -/* channel control operations */ -int edma_start(unsigned channel); -void edma_stop(unsigned channel); -void edma_clean_channel(unsigned channel); -void edma_clear_event(unsigned channel); -void edma_pause(unsigned channel); -void edma_resume(unsigned channel); - -struct edma_rsv_info { - - const s16 (*rsv_chans)[2]; - const s16 (*rsv_slots)[2]; -}; - -/* platform_data for EDMA driver */ -struct edma_soc_info { - - /* how many dma resources of each type */ - unsigned n_channel; - unsigned n_region; - unsigned n_slot; - unsigned n_tc; - unsigned n_cc; - enum dma_event_q default_queue; - - /* Resource reservation for other cores */ - struct edma_rsv_info *rsv; - - const s8 (*queue_tc_mapping)[2]; - const s8 (*queue_priority_mapping)[2]; -}; - -#endif diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index e14c0dc0e12..cf5f573eb5f 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -8,20 +8,13 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <mach/io.h> #include <mach/irqs.h> - .macro disable_fiq - .endm - .macro get_irqnr_preamble, base, tmp ldr \base, =davinci_intc_base ldr \base, [\base] .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp #if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC) ldr \tmp, =davinci_intc_type @@ -37,12 +30,10 @@ #endif #if defined(CONFIG_CP_INTC) 1001: ldr \irqnr, [\base, #0x80] /* get irq number */ + mov \tmp, \irqnr, lsr #31 and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */ - mov \tmp, \irqnr, lsr #3 - and \tmp, \tmp, #0xfc - add \tmp, \tmp, #0x280 /* get the register offset */ - ldr \irqstat, [\base, \tmp] /* get the intc status */ - cmp \irqstat, #0x0 + and \tmp, \tmp, #0x1 + cmp \tmp, #0x1 #endif 1002: .endm diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h deleted file mode 100644 index 1fdd1fd3544..00000000000 --- a/arch/arm/mach-davinci/include/mach/gpio-davinci.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DAVINCI_DAVINCI_GPIO_H -#define __DAVINCI_DAVINCI_GPIO_H - -#include <linux/io.h> -#include <linux/spinlock.h> - -#include <asm-generic/gpio.h> - -#include <mach/irqs.h> -#include <mach/common.h> - -#define DAVINCI_GPIO_BASE 0x01C67000 - -enum davinci_gpio_type { - GPIO_TYPE_DAVINCI = 0, - GPIO_TYPE_TNETV107X, -}; - -/* - * basic gpio routines - * - * board-specific init should be done by arch/.../.../board-XXX.c (maybe - * initializing banks together) rather than boot loaders; kexec() won't - * go through boot loaders. - * - * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX registers to be sure those pins are - * used as gpios, not with other peripherals. - * - * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code may write GPIO(N). These may be - * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip - * may not support all the GPIOs in that range. - * - * GPIOs can also be on external chips, numbered after the ones built-in - * to the DaVinci chip. For now, they won't be usable as IRQ sources. - */ -#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ - -/* Convert GPIO signal to GPIO pin number */ -#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) - -struct davinci_gpio_controller { - struct gpio_chip chip; - int irq_base; - spinlock_t lock; - void __iomem *regs; - void __iomem *set_data; - void __iomem *clr_data; - void __iomem *in_data; -}; - -/* The __gpio_to_controller() and __gpio_mask() functions inline to constants - * with constant parameters; or in outlined code they execute at runtime. - * - * You'd access the controller directly when reading or writing more than - * one gpio value at a time, and to support wired logic where the value - * being driven by the cpu need not match the value read back. - * - * These are NOT part of the cross-platform GPIO interface - */ -static inline struct davinci_gpio_controller * -__gpio_to_controller(unsigned gpio) -{ - struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs; - int index = gpio / 32; - - if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num) - return NULL; - - return ctlrs + index; -} - -static inline u32 __gpio_mask(unsigned gpio) -{ - return 1 << (gpio % 32); -} - -#endif /* __DAVINCI_DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h deleted file mode 100644 index 960e9de47e1..00000000000 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DAVINCI_GPIO_H -#define __DAVINCI_GPIO_H - -#include <asm-generic/gpio.h> - -#define __ARM_GPIOLIB_COMPLEX - -/* The inline versions use the static inlines in the driver header */ -#include "gpio-davinci.h" - -/* - * The get/set/clear functions will inline when called with constant - * parameters referencing built-in GPIOs, for low-overhead bitbanging. - * - * gpio_set_value() will inline only on traditional Davinci style controllers - * with distinct set/clear registers. - * - * Otherwise, calls with variable parameters or referencing external - * GPIOs (e.g. on GPIO expander chips) use outlined functions. - */ -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) { - struct davinci_gpio_controller *ctlr; - u32 mask; - - ctlr = __gpio_to_controller(gpio); - - if (ctlr->set_data != ctlr->clr_data) { - mask = __gpio_mask(gpio); - if (value) - __raw_writel(mask, ctlr->set_data); - else - __raw_writel(mask, ctlr->clr_data); - return; - } - } - - __gpio_set_value(gpio, value); -} - -/* Returns zero or nonzero; works for gpios configured as inputs OR - * as outputs, at least for built-in GPIOs. - * - * NOTE: for built-in GPIOs, changes in reported values are synchronized - * to the GPIO clock. This is easily seen after calling gpio_set_value() - * and then immediately gpio_get_value(), where the gpio_get_value() will - * return the old value until the GPIO clock ticks and the new value gets - * latched. - */ -static inline int gpio_get_value(unsigned gpio) -{ - struct davinci_gpio_controller *ctlr; - - if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num) - return __gpio_get_value(gpio); - - ctlr = __gpio_to_controller(gpio); - return __gpio_mask(gpio) & __raw_readl(ctlr->in_data); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num) - return 0; - else - return __gpio_cansleep(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - /* don't support the reverse mapping */ - return -ENOSYS; -} - -#endif /* __DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index 414e0b93e74..16bb42291d3 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -19,12 +19,10 @@ * and the chip/board init code should then explicitly include * <chipname>.h */ -#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 - /* * I/O mapping */ -#define IO_PHYS 0x01c00000UL +#define IO_PHYS UL(0x01c00000) #define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */ #define IO_SIZE 0x00400000 #define IO_VIRT (IO_PHYS + IO_OFFSET) @@ -32,10 +30,4 @@ #define __IO_ADDRESS(x) ((x) + IO_OFFSET) #define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa)) -#ifdef __ASSEMBLER__ -#define IOMEM(x) x -#else -#define IOMEM(x) ((void __force __iomem *)(x)) -#endif - #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h deleted file mode 100644 index 2312d197dfb..00000000000 --- a/arch/arm/mach-davinci/include/mach/i2c.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * DaVinci I2C controller platform_device info - * - * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. -*/ - -#ifndef __ASM_ARCH_I2C_H -#define __ASM_ARCH_I2C_H - -/* All frequencies are expressed in kHz */ -struct davinci_i2c_platform_data { - unsigned int bus_freq; /* standard bus frequency (kHz) */ - unsigned int bus_delay; /* post-transaction delay (usec) */ - unsigned int sda_pin; /* GPIO pin ID to use for SDA */ - unsigned int scl_pin; /* GPIO pin ID to use for SCL */ -}; - -/* for board setup code */ -void davinci_init_i2c(struct davinci_i2c_platform_data *); - -#endif /* __ASM_ARCH_I2C_H */ diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h deleted file mode 100644 index b2267d1e1a7..00000000000 --- a/arch/arm/mach-davinci/include/mach/io.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * DaVinci IO address definitions - * - * Copied from include/asm/arm/arch-omap/io.h - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) -#define __mem_isa(a) (a) - -#endif /* __ASM_ARCH_IO_H */ diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index ec76c7775c2..354af71798d 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -401,103 +401,6 @@ #define DA850_N_CP_INTC_IRQ 101 - -/* TNETV107X specific interrupts */ -#define IRQ_TNETV107X_TDM1_TXDMA 0 -#define IRQ_TNETV107X_EXT_INT_0 1 -#define IRQ_TNETV107X_EXT_INT_1 2 -#define IRQ_TNETV107X_GPIO_INT12 3 -#define IRQ_TNETV107X_GPIO_INT13 4 -#define IRQ_TNETV107X_TIMER_0_TINT12 5 -#define IRQ_TNETV107X_TIMER_1_TINT12 6 -#define IRQ_TNETV107X_UART0 7 -#define IRQ_TNETV107X_TDM1_RXDMA 8 -#define IRQ_TNETV107X_MCDMA_INT0 9 -#define IRQ_TNETV107X_MCDMA_INT1 10 -#define IRQ_TNETV107X_TPCC 11 -#define IRQ_TNETV107X_TPCC_INT0 12 -#define IRQ_TNETV107X_TPCC_INT1 13 -#define IRQ_TNETV107X_TPCC_INT2 14 -#define IRQ_TNETV107X_TPCC_INT3 15 -#define IRQ_TNETV107X_TPTC0 16 -#define IRQ_TNETV107X_TPTC1 17 -#define IRQ_TNETV107X_TIMER_0_TINT34 18 -#define IRQ_TNETV107X_ETHSS 19 -#define IRQ_TNETV107X_TIMER_1_TINT34 20 -#define IRQ_TNETV107X_DSP2ARM_INT0 21 -#define IRQ_TNETV107X_DSP2ARM_INT1 22 -#define IRQ_TNETV107X_ARM_NPMUIRQ 23 -#define IRQ_TNETV107X_USB1 24 -#define IRQ_TNETV107X_VLYNQ 25 -#define IRQ_TNETV107X_UART0_DMATX 26 -#define IRQ_TNETV107X_UART0_DMARX 27 -#define IRQ_TNETV107X_TDM1_TXMCSP 28 -#define IRQ_TNETV107X_SSP 29 -#define IRQ_TNETV107X_MCDMA_INT2 30 -#define IRQ_TNETV107X_MCDMA_INT3 31 -#define IRQ_TNETV107X_TDM_CODECIF_EOT 32 -#define IRQ_TNETV107X_IMCOP_SQR_ARM 33 -#define IRQ_TNETV107X_USB0 34 -#define IRQ_TNETV107X_USB_CDMA 35 -#define IRQ_TNETV107X_LCD 36 -#define IRQ_TNETV107X_KEYPAD 37 -#define IRQ_TNETV107X_KEYPAD_FREE 38 -#define IRQ_TNETV107X_RNG 39 -#define IRQ_TNETV107X_PKA 40 -#define IRQ_TNETV107X_TDM0_TXDMA 41 -#define IRQ_TNETV107X_TDM0_RXDMA 42 -#define IRQ_TNETV107X_TDM0_TXMCSP 43 -#define IRQ_TNETV107X_TDM0_RXMCSP 44 -#define IRQ_TNETV107X_TDM1_RXMCSP 45 -#define IRQ_TNETV107X_SDIO1 46 -#define IRQ_TNETV107X_SDIO0 47 -#define IRQ_TNETV107X_TSC 48 -#define IRQ_TNETV107X_TS 49 -#define IRQ_TNETV107X_UART1 50 -#define IRQ_TNETV107X_MBX_LITE 51 -#define IRQ_TNETV107X_GPIO_INT00 52 -#define IRQ_TNETV107X_GPIO_INT01 53 -#define IRQ_TNETV107X_GPIO_INT02 54 -#define IRQ_TNETV107X_GPIO_INT03 55 -#define IRQ_TNETV107X_UART2 56 -#define IRQ_TNETV107X_UART2_DMATX 57 -#define IRQ_TNETV107X_UART2_DMARX 58 -#define IRQ_TNETV107X_IMCOP_IMX 59 -#define IRQ_TNETV107X_IMCOP_VLCD 60 -#define IRQ_TNETV107X_AES 61 -#define IRQ_TNETV107X_DES 62 -#define IRQ_TNETV107X_SHAMD5 63 -#define IRQ_TNETV107X_TPCC_ERR 68 -#define IRQ_TNETV107X_TPCC_PROT 69 -#define IRQ_TNETV107X_TPTC0_ERR 70 -#define IRQ_TNETV107X_TPTC1_ERR 71 -#define IRQ_TNETV107X_UART0_ERR 72 -#define IRQ_TNETV107X_UART1_ERR 73 -#define IRQ_TNETV107X_AEMIF_ERR 74 -#define IRQ_TNETV107X_DDR_ERR 75 -#define IRQ_TNETV107X_WDTARM_INT0 76 -#define IRQ_TNETV107X_MCDMA_ERR 77 -#define IRQ_TNETV107X_GPIO_ERR 78 -#define IRQ_TNETV107X_MPU_ADDR 79 -#define IRQ_TNETV107X_MPU_PROT 80 -#define IRQ_TNETV107X_IOPU_ADDR 81 -#define IRQ_TNETV107X_IOPU_PROT 82 -#define IRQ_TNETV107X_KEYPAD_ADDR_ERR 83 -#define IRQ_TNETV107X_WDT0_ADDR_ERR 84 -#define IRQ_TNETV107X_WDT1_ADDR_ERR 85 -#define IRQ_TNETV107X_CLKCTL_ADDR_ERR 86 -#define IRQ_TNETV107X_PLL_UNLOCK 87 -#define IRQ_TNETV107X_WDTDSP_INT0 88 -#define IRQ_TNETV107X_SEC_CTRL_VIOLATION 89 -#define IRQ_TNETV107X_KEY_MNG_VIOLATION 90 -#define IRQ_TNETV107X_PBIST_CPU 91 -#define IRQ_TNETV107X_WDTARM 92 -#define IRQ_TNETV107X_PSC 93 -#define IRQ_TNETV107X_MMC0 94 -#define IRQ_TNETV107X_MMC1 95 - -#define TNETV107X_N_CP_INTC_IRQ 96 - /* da850 currently has the most gpio pins (144) */ #define DAVINCI_N_GPIO 144 /* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */ diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h deleted file mode 100644 index 7a560e05bda..00000000000 --- a/arch/arm/mach-davinci/include/mach/keyscan.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments, Inc - * - * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef DAVINCI_KEYSCAN_H -#define DAVINCI_KEYSCAN_H - -#include <linux/io.h> - -enum davinci_matrix_types { - DAVINCI_KEYSCAN_MATRIX_4X4, - DAVINCI_KEYSCAN_MATRIX_5X3, -}; - -struct davinci_ks_platform_data { - int (*device_enable)(struct device *dev); - unsigned short *keymap; - u32 keymapsize; - u8 rep:1; - u8 strobe; - u8 interval; - u8 matrix_type; -}; - -#endif - diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h deleted file mode 100644 index 5ba6b22ce33..00000000000 --- a/arch/arm/mach-davinci/include/mach/mmc.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Board-specific MMC configuration - */ - -#ifndef _DAVINCI_MMC_H -#define _DAVINCI_MMC_H - -#include <linux/types.h> -#include <linux/mmc/host.h> - -struct davinci_mmc_config { - /* get_cd()/get_wp() may sleep */ - int (*get_cd)(int module); - int (*get_ro)(int module); - - void (*set_power)(int module, bool on); - - /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */ - u8 wires; - - u32 max_freq; - - /* any additional host capabilities: OR'd in to mmc->f_caps */ - u32 caps; - - /* Version of the MMC/SD controller */ - u8 version; - - /* Number of sg segments */ - u8 nr_sg; -}; -void davinci_setup_mmc(int module, struct davinci_mmc_config *config); - -enum { - MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */ - MMC_CTLR_VERSION_2, /* DA830 */ -}; - -#endif diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index a7e92fca32e..631655e68ae 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -928,275 +928,48 @@ enum davinci_da850_index { DA850_GPIO6_10, DA850_GPIO6_13, DA850_RTC_ALARM, -}; -enum davinci_tnetv107x_index { - TNETV107X_ASR_A00, - TNETV107X_GPIO32, - TNETV107X_ASR_A01, - TNETV107X_GPIO33, - TNETV107X_ASR_A02, - TNETV107X_GPIO34, - TNETV107X_ASR_A03, - TNETV107X_GPIO35, - TNETV107X_ASR_A04, - TNETV107X_GPIO36, - TNETV107X_ASR_A05, - TNETV107X_GPIO37, - TNETV107X_ASR_A06, - TNETV107X_GPIO38, - TNETV107X_ASR_A07, - TNETV107X_GPIO39, - TNETV107X_ASR_A08, - TNETV107X_GPIO40, - TNETV107X_ASR_A09, - TNETV107X_GPIO41, - TNETV107X_ASR_A10, - TNETV107X_GPIO42, - TNETV107X_ASR_A11, - TNETV107X_BOOT_STRP_0, - TNETV107X_ASR_A12, - TNETV107X_BOOT_STRP_1, - TNETV107X_ASR_A13, - TNETV107X_GPIO43, - TNETV107X_ASR_A14, - TNETV107X_GPIO44, - TNETV107X_ASR_A15, - TNETV107X_GPIO45, - TNETV107X_ASR_A16, - TNETV107X_GPIO46, - TNETV107X_ASR_A17, - TNETV107X_GPIO47, - TNETV107X_ASR_A18, - TNETV107X_GPIO48, - TNETV107X_SDIO1_DATA3_0, - TNETV107X_ASR_A19, - TNETV107X_GPIO49, - TNETV107X_SDIO1_DATA2_0, - TNETV107X_ASR_A20, - TNETV107X_GPIO50, - TNETV107X_SDIO1_DATA1_0, - TNETV107X_ASR_A21, - TNETV107X_GPIO51, - TNETV107X_SDIO1_DATA0_0, - TNETV107X_ASR_A22, - TNETV107X_GPIO52, - TNETV107X_SDIO1_CMD_0, - TNETV107X_ASR_A23, - TNETV107X_GPIO53, - TNETV107X_SDIO1_CLK_0, - TNETV107X_ASR_BA_1, - TNETV107X_GPIO54, - TNETV107X_SYS_PLL_CLK, - TNETV107X_ASR_CS0, - TNETV107X_ASR_CS1, - TNETV107X_ASR_CS2, - TNETV107X_TDM_PLL_CLK, - TNETV107X_ASR_CS3, - TNETV107X_ETH_PHY_CLK, - TNETV107X_ASR_D00, - TNETV107X_GPIO55, - TNETV107X_ASR_D01, - TNETV107X_GPIO56, - TNETV107X_ASR_D02, - TNETV107X_GPIO57, - TNETV107X_ASR_D03, - TNETV107X_GPIO58, - TNETV107X_ASR_D04, - TNETV107X_GPIO59_0, - TNETV107X_ASR_D05, - TNETV107X_GPIO60_0, - TNETV107X_ASR_D06, - TNETV107X_GPIO61_0, - TNETV107X_ASR_D07, - TNETV107X_GPIO62_0, - TNETV107X_ASR_D08, - TNETV107X_GPIO63_0, - TNETV107X_ASR_D09, - TNETV107X_GPIO64_0, - TNETV107X_ASR_D10, - TNETV107X_SDIO1_DATA3_1, - TNETV107X_ASR_D11, - TNETV107X_SDIO1_DATA2_1, - TNETV107X_ASR_D12, - TNETV107X_SDIO1_DATA1_1, - TNETV107X_ASR_D13, - TNETV107X_SDIO1_DATA0_1, - TNETV107X_ASR_D14, - TNETV107X_SDIO1_CMD_1, - TNETV107X_ASR_D15, - TNETV107X_SDIO1_CLK_1, - TNETV107X_ASR_OE, - TNETV107X_BOOT_STRP_2, - TNETV107X_ASR_RNW, - TNETV107X_GPIO29_0, - TNETV107X_ASR_WAIT, - TNETV107X_GPIO30_0, - TNETV107X_ASR_WE, - TNETV107X_BOOT_STRP_3, - TNETV107X_ASR_WE_DQM0, - TNETV107X_GPIO31, - TNETV107X_LCD_PD17_0, - TNETV107X_ASR_WE_DQM1, - TNETV107X_ASR_BA0_0, - TNETV107X_VLYNQ_CLK, - TNETV107X_GPIO14, - TNETV107X_LCD_PD19_0, - TNETV107X_VLYNQ_RXD0, - TNETV107X_GPIO15, - TNETV107X_LCD_PD20_0, - TNETV107X_VLYNQ_RXD1, - TNETV107X_GPIO16, - TNETV107X_LCD_PD21_0, - TNETV107X_VLYNQ_TXD0, - TNETV107X_GPIO17, - TNETV107X_LCD_PD22_0, - TNETV107X_VLYNQ_TXD1, - TNETV107X_GPIO18, - TNETV107X_LCD_PD23_0, - TNETV107X_SDIO0_CLK, - TNETV107X_GPIO19, - TNETV107X_SDIO0_CMD, - TNETV107X_GPIO20, - TNETV107X_SDIO0_DATA0, - TNETV107X_GPIO21, - TNETV107X_SDIO0_DATA1, - TNETV107X_GPIO22, - TNETV107X_SDIO0_DATA2, - TNETV107X_GPIO23, - TNETV107X_SDIO0_DATA3, - TNETV107X_GPIO24, - TNETV107X_EMU0, - TNETV107X_EMU1, - TNETV107X_RTCK, - TNETV107X_TRST_N, - TNETV107X_TCK, - TNETV107X_TDI, - TNETV107X_TDO, - TNETV107X_TMS, - TNETV107X_TDM1_CLK, - TNETV107X_TDM1_RX, - TNETV107X_TDM1_TX, - TNETV107X_TDM1_FS, - TNETV107X_KEYPAD_R0, - TNETV107X_KEYPAD_R1, - TNETV107X_KEYPAD_R2, - TNETV107X_KEYPAD_R3, - TNETV107X_KEYPAD_R4, - TNETV107X_KEYPAD_R5, - TNETV107X_KEYPAD_R6, - TNETV107X_GPIO12, - TNETV107X_KEYPAD_R7, - TNETV107X_GPIO10, - TNETV107X_KEYPAD_C0, - TNETV107X_KEYPAD_C1, - TNETV107X_KEYPAD_C2, - TNETV107X_KEYPAD_C3, - TNETV107X_KEYPAD_C4, - TNETV107X_KEYPAD_C5, - TNETV107X_KEYPAD_C6, - TNETV107X_GPIO13, - TNETV107X_TEST_CLK_IN, - TNETV107X_KEYPAD_C7, - TNETV107X_GPIO11, - TNETV107X_SSP0_0, - TNETV107X_SCC_DCLK, - TNETV107X_LCD_PD20_1, - TNETV107X_SSP0_1, - TNETV107X_SCC_CS_N, - TNETV107X_LCD_PD21_1, - TNETV107X_SSP0_2, - TNETV107X_SCC_D, - TNETV107X_LCD_PD22_1, - TNETV107X_SSP0_3, - TNETV107X_SCC_RESETN, - TNETV107X_LCD_PD23_1, - TNETV107X_SSP1_0, - TNETV107X_GPIO25, - TNETV107X_UART2_CTS, - TNETV107X_SSP1_1, - TNETV107X_GPIO26, - TNETV107X_UART2_RD, - TNETV107X_SSP1_2, - TNETV107X_GPIO27, - TNETV107X_UART2_RTS, - TNETV107X_SSP1_3, - TNETV107X_GPIO28, - TNETV107X_UART2_TD, - TNETV107X_UART0_CTS, - TNETV107X_UART0_RD, - TNETV107X_UART0_RTS, - TNETV107X_UART0_TD, - TNETV107X_UART1_RD, - TNETV107X_UART1_TD, - TNETV107X_LCD_AC_NCS, - TNETV107X_LCD_HSYNC_RNW, - TNETV107X_LCD_VSYNC_A0, - TNETV107X_LCD_MCLK, - TNETV107X_LCD_PD16_0, - TNETV107X_LCD_PCLK_E, - TNETV107X_LCD_PD00, - TNETV107X_LCD_PD01, - TNETV107X_LCD_PD02, - TNETV107X_LCD_PD03, - TNETV107X_LCD_PD04, - TNETV107X_LCD_PD05, - TNETV107X_LCD_PD06, - TNETV107X_LCD_PD07, - TNETV107X_LCD_PD08, - TNETV107X_GPIO59_1, - TNETV107X_LCD_PD09, - TNETV107X_GPIO60_1, - TNETV107X_LCD_PD10, - TNETV107X_ASR_BA0_1, - TNETV107X_GPIO61_1, - TNETV107X_LCD_PD11, - TNETV107X_GPIO62_1, - TNETV107X_LCD_PD12, - TNETV107X_GPIO63_1, - TNETV107X_LCD_PD13, - TNETV107X_GPIO64_1, - TNETV107X_LCD_PD14, - TNETV107X_GPIO29_1, - TNETV107X_LCD_PD15, - TNETV107X_GPIO30_1, - TNETV107X_EINT0, - TNETV107X_GPIO08, - TNETV107X_EINT1, - TNETV107X_GPIO09, - TNETV107X_GPIO00, - TNETV107X_LCD_PD20_2, - TNETV107X_TDM_CLK_IN_2, - TNETV107X_GPIO01, - TNETV107X_LCD_PD21_2, - TNETV107X_24M_CLK_OUT_1, - TNETV107X_GPIO02, - TNETV107X_LCD_PD22_2, - TNETV107X_GPIO03, - TNETV107X_LCD_PD23_2, - TNETV107X_GPIO04, - TNETV107X_LCD_PD16_1, - TNETV107X_USB0_RXERR, - TNETV107X_GPIO05, - TNETV107X_LCD_PD17_1, - TNETV107X_TDM_CLK_IN_1, - TNETV107X_GPIO06, - TNETV107X_LCD_PD18, - TNETV107X_24M_CLK_OUT_2, - TNETV107X_GPIO07, - TNETV107X_LCD_PD19_1, - TNETV107X_USB1_RXERR, - TNETV107X_ETH_PLL_CLK, - TNETV107X_MDIO, - TNETV107X_MDC, - TNETV107X_AIC_MUTE_STAT_N, - TNETV107X_TDM0_CLK, - TNETV107X_AIC_HNS_EN_N, - TNETV107X_TDM0_FS, - TNETV107X_AIC_HDS_EN_STAT_N, - TNETV107X_TDM0_TX, - TNETV107X_AIC_HNF_EN_STAT_N, - TNETV107X_TDM0_RX, + /* VPIF Capture */ + DA850_VPIF_DIN0, + DA850_VPIF_DIN1, + DA850_VPIF_DIN2, + DA850_VPIF_DIN3, + DA850_VPIF_DIN4, + DA850_VPIF_DIN5, + DA850_VPIF_DIN6, + DA850_VPIF_DIN7, + DA850_VPIF_DIN8, + DA850_VPIF_DIN9, + DA850_VPIF_DIN10, + DA850_VPIF_DIN11, + DA850_VPIF_DIN12, + DA850_VPIF_DIN13, + DA850_VPIF_DIN14, + DA850_VPIF_DIN15, + DA850_VPIF_CLKIN0, + DA850_VPIF_CLKIN1, + DA850_VPIF_CLKIN2, + DA850_VPIF_CLKIN3, + + /* VPIF Display */ + DA850_VPIF_DOUT0, + DA850_VPIF_DOUT1, + DA850_VPIF_DOUT2, + DA850_VPIF_DOUT3, + DA850_VPIF_DOUT4, + DA850_VPIF_DOUT5, + DA850_VPIF_DOUT6, + DA850_VPIF_DOUT7, + DA850_VPIF_DOUT8, + DA850_VPIF_DOUT9, + DA850_VPIF_DOUT10, + DA850_VPIF_DOUT11, + DA850_VPIF_DOUT12, + DA850_VPIF_DOUT13, + DA850_VPIF_DOUT14, + DA850_VPIF_DOUT15, + DA850_VPIF_CLKO2, + DA850_VPIF_CLKO3, }; #define PINMUX(x) (4 * (x)) diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h deleted file mode 100644 index 1cf555aef89..00000000000 --- a/arch/arm/mach-davinci/include/mach/nand.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * mach-davinci/nand.h - * - * Copyright © 2006 Texas Instruments. - * - * Ported to 2.6.23 Copyright © 2008 by - * Sander Huijsen <Shuijsen@optelecom-nkf.com> - * Troy Kisky <troy.kisky@boundarydevices.com> - * Dirk Behme <Dirk.Behme@gmail.com> - * - * -------------------------------------------------------------------------- - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_DAVINCI_NAND_H -#define __ARCH_ARM_DAVINCI_NAND_H - -#include <linux/mtd/nand.h> - -#define NANDFCR_OFFSET 0x60 -#define NANDFSR_OFFSET 0x64 -#define NANDF1ECC_OFFSET 0x70 - -/* 4-bit ECC syndrome registers */ -#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc -#define NAND_4BIT_ECC1_OFFSET 0xc0 -#define NAND_4BIT_ECC2_OFFSET 0xc4 -#define NAND_4BIT_ECC3_OFFSET 0xc8 -#define NAND_4BIT_ECC4_OFFSET 0xcc -#define NAND_ERR_ADD1_OFFSET 0xd0 -#define NAND_ERR_ADD2_OFFSET 0xd4 -#define NAND_ERR_ERRVAL1_OFFSET 0xd8 -#define NAND_ERR_ERRVAL2_OFFSET 0xdc - -/* NOTE: boards don't need to use these address bits - * for ALE/CLE unless they support booting from NAND. - * They're used unless platform data overrides them. - */ -#define MASK_ALE 0x08 -#define MASK_CLE 0x10 - -struct davinci_nand_pdata { /* platform_data */ - uint32_t mask_ale; - uint32_t mask_cle; - - /* for packages using two chipselects */ - uint32_t mask_chipsel; - - /* board's default static partition info */ - struct mtd_partition *parts; - unsigned nr_parts; - - /* none == NAND_ECC_NONE (strongly *not* advised!!) - * soft == NAND_ECC_SOFT - * else == NAND_ECC_HW, according to ecc_bits - * - * All DaVinci-family chips support 1-bit hardware ECC. - * Newer ones also support 4-bit ECC, but are awkward - * using it with large page chips. - */ - nand_ecc_modes_t ecc_mode; - u8 ecc_bits; - - /* e.g. NAND_BUSWIDTH_16 */ - unsigned options; - /* e.g. NAND_BBT_USE_FLASH */ - unsigned bbt_options; - - /* Main and mirror bbt descriptor overrides */ - struct nand_bbt_descr *bbt_td; - struct nand_bbt_descr *bbt_md; - - /* Access timings */ - struct davinci_aemif_timing *timing; -}; - -#endif /* __ARCH_ARM_DAVINCI_NAND_H */ diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 8bc3fc25617..99d47cfa301 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -166,6 +166,7 @@ #define DA830_LPSC1_McASP1 8 #define DA850_LPSC1_SATA 8 #define DA830_LPSC1_McASP2 9 +#define DA850_LPSC1_VPIF 9 #define DA8XX_LPSC1_SPI1 10 #define DA8XX_LPSC1_I2C 11 #define DA8XX_LPSC1_UART1 12 @@ -181,53 +182,6 @@ #define DA8XX_LPSC1_CR_P3_SS 26 #define DA8XX_LPSC1_L3_CBA_RAM 31 -/* TNETV107X LPSC Assignments */ -#define TNETV107X_LPSC_ARM 0 -#define TNETV107X_LPSC_GEM 1 -#define TNETV107X_LPSC_DDR2_PHY 2 -#define TNETV107X_LPSC_TPCC 3 -#define TNETV107X_LPSC_TPTC0 4 -#define TNETV107X_LPSC_TPTC1 5 -#define TNETV107X_LPSC_RAM 6 -#define TNETV107X_LPSC_MBX_LITE 7 -#define TNETV107X_LPSC_LCD 8 -#define TNETV107X_LPSC_ETHSS 9 -#define TNETV107X_LPSC_AEMIF 10 -#define TNETV107X_LPSC_CHIP_CFG 11 -#define TNETV107X_LPSC_TSC 12 -#define TNETV107X_LPSC_ROM 13 -#define TNETV107X_LPSC_UART2 14 -#define TNETV107X_LPSC_PKTSEC 15 -#define TNETV107X_LPSC_SECCTL 16 -#define TNETV107X_LPSC_KEYMGR 17 -#define TNETV107X_LPSC_KEYPAD 18 -#define TNETV107X_LPSC_GPIO 19 -#define TNETV107X_LPSC_MDIO 20 -#define TNETV107X_LPSC_SDIO0 21 -#define TNETV107X_LPSC_UART0 22 -#define TNETV107X_LPSC_UART1 23 -#define TNETV107X_LPSC_TIMER0 24 -#define TNETV107X_LPSC_TIMER1 25 -#define TNETV107X_LPSC_WDT_ARM 26 -#define TNETV107X_LPSC_WDT_DSP 27 -#define TNETV107X_LPSC_SSP 28 -#define TNETV107X_LPSC_TDM0 29 -#define TNETV107X_LPSC_VLYNQ 30 -#define TNETV107X_LPSC_MCDMA 31 -#define TNETV107X_LPSC_USB0 32 -#define TNETV107X_LPSC_TDM1 33 -#define TNETV107X_LPSC_DEBUGSS 34 -#define TNETV107X_LPSC_ETHSS_RGMII 35 -#define TNETV107X_LPSC_SYSTEM 36 -#define TNETV107X_LPSC_IMCOP 37 -#define TNETV107X_LPSC_SPARE 38 -#define TNETV107X_LPSC_SDIO1 39 -#define TNETV107X_LPSC_USB1 40 -#define TNETV107X_LPSC_USBSS 41 -#define TNETV107X_LPSC_DDR2_EMIF1_VRST 42 -#define TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST 43 -#define TNETV107X_LPSC_MAX 44 - /* PSC register offsets */ #define EPCPR 0x070 #define PTCMD 0x120 @@ -245,13 +199,16 @@ #define MDSTAT_STATE_MASK 0x3f #define PDSTAT_STATE_MASK 0x1f +#define MDCTL_LRST BIT(8) #define MDCTL_FORCE BIT(31) -#define PDCTL_NEXT BIT(1) +#define PDCTL_NEXT BIT(0) #define PDCTL_EPCGOOD BIT(8) #ifndef __ASSEMBLER__ extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id); +extern void davinci_psc_reset(unsigned int ctlr, unsigned int id, + bool reset); extern void davinci_psc_config(unsigned int domain, unsigned int ctlr, unsigned int id, bool enable, u32 flags); diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index e347d88fef9..d4b4aa87964 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -15,16 +15,6 @@ #include <mach/hardware.h> -/* - * Stolen area that contains debug uart physical and virtual addresses. These - * addresses are filled in by the uncompress.h code, and are used by the debug - * macros in debug-macro.S. - * - * This area sits just below the page tables (see arch/arm/kernel/head.S). - * We define it as a relative offset from start of usable RAM. - */ -#define DAVINCI_UART_INFO_OFS 0x3ff8 - #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) @@ -33,26 +23,15 @@ #define DA8XX_UART1_BASE (IO_PHYS + 0x10c000) #define DA8XX_UART2_BASE (IO_PHYS + 0x10d000) -#define TNETV107X_UART0_BASE 0x08108100 -#define TNETV107X_UART1_BASE 0x08088400 -#define TNETV107X_UART2_BASE 0x08108300 - -#define TNETV107X_UART0_VIRT IOMEM(0xfee08100) -#define TNETV107X_UART1_VIRT IOMEM(0xfed88400) -#define TNETV107X_UART2_VIRT IOMEM(0xfee08300) - /* DaVinci UART register offsets */ #define UART_DAVINCI_PWREMU 0x0c #define UART_DM646X_SCR 0x10 #define UART_DM646X_SCR_TX_WATERMARK 0x08 #ifndef __ASSEMBLY__ -struct davinci_uart_config { - /* Bit field of UARTs present; bit 0 --> UART1 */ - unsigned int enabled_uarts; -}; +#include <linux/platform_device.h> -extern int davinci_serial_init(struct davinci_uart_config *); +extern int davinci_serial_init(struct platform_device *); #endif #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h deleted file mode 100644 index 7af305b3786..00000000000 --- a/arch/arm/mach-davinci/include/mach/spi.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright 2009 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_DAVINCI_SPI_H -#define __ARCH_ARM_DAVINCI_SPI_H - -#include <mach/edma.h> - -#define SPI_INTERN_CS 0xFF - -enum { - SPI_VERSION_1, /* For DM355/DM365/DM6467 */ - SPI_VERSION_2, /* For DA8xx */ -}; - -/** - * davinci_spi_platform_data - Platform data for SPI master device on DaVinci - * - * @version: version of the SPI IP. Different DaVinci devices have slightly - * varying versions of the same IP. - * @num_chipselect: number of chipselects supported by this SPI master - * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt - * controller withn the SoC. Possible values are 0 and 1. - * @chip_sel: list of GPIOs which can act as chip-selects for the SPI. - * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary - * to populate if all chip-selects are internal. - * @cshold_bug: set this to true if the SPI controller on your chip requires - * a write to CSHOLD bit in between transfers (like in DM355). - * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any - * device on the bus. - */ -struct davinci_spi_platform_data { - u8 version; - u8 num_chipselect; - u8 intr_line; - u8 *chip_sel; - bool cshold_bug; - enum dma_event_q dma_event_q; -}; - -/** - * davinci_spi_config - Per-chip-select configuration for SPI slave devices - * - * @wdelay: amount of delay between transmissions. Measured in number of - * SPI module clocks. - * @odd_parity: polarity of parity flag at the end of transmit data stream. - * 0 - odd parity, 1 - even parity. - * @parity_enable: enable transmission of parity at end of each transmit - * data stream. - * @io_type: type of IO transfer. Choose between polled, interrupt and DMA. - * @timer_disable: disable chip-select timers (setup and hold) - * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks. - * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks. - * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured - * in number of SPI clocks. - * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in - * number of SPI clocks. - */ -struct davinci_spi_config { - u8 wdelay; - u8 odd_parity; - u8 parity_enable; -#define SPI_IO_TYPE_INTR 0 -#define SPI_IO_TYPE_POLL 1 -#define SPI_IO_TYPE_DMA 2 - u8 io_type; - u8 timer_disable; - u8 c2tdelay; - u8 t2cdelay; - u8 t2edelay; - u8 c2edelay; -}; - -#endif /* __ARCH_ARM_DAVINCI_SPI_H */ diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h index 111f7cc71e0..4e5db56218b 100644 --- a/arch/arm/mach-davinci/include/mach/sram.h +++ b/arch/arm/mach-davinci/include/mach/sram.h @@ -24,4 +24,7 @@ extern void *sram_alloc(size_t len, dma_addr_t *dma); extern void sram_free(void *addr, size_t len); +/* Get the struct gen_pool * for use in platform data */ +extern struct gen_pool *sram_get_gen_pool(void); + #endif /* __MACH_SRAM_H */ diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h deleted file mode 100644 index fcb7a015aba..00000000000 --- a/arch/arm/mach-davinci/include/mach/system.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * DaVinci system defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <mach/common.h> - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h deleted file mode 100644 index 9b885298f10..00000000000 --- a/arch/arm/mach-davinci/include/mach/timex.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * DaVinci timer defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* - * Alert: Not all timers of the DaVinci family run at a frequency of 27MHz, - * but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/ - * linux/jiffies.h) are not used directly in code. Currently none of the - * code relevant to DaVinci platform depends on these values directly. - */ -#define CLOCK_TICK_RATE 27000000 - -#endif /* __ASM_ARCH_TIMEX_H__ */ diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h deleted file mode 100644 index 83e5926f3c4..00000000000 --- a/arch/arm/mach-davinci/include/mach/tnetv107x.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Texas Instruments TNETV107X SoC Specific Defines - * - * Copyright (C) 2010 Texas Instruments - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_ARCH_DAVINCI_TNETV107X_H -#define __ASM_ARCH_DAVINCI_TNETV107X_H - -#include <asm/sizes.h> - -#define TNETV107X_DDR_BASE 0x80000000 - -/* - * Fixed mapping for early init starts here. If low-level debug is enabled, - * this area also gets mapped via io_pg_offset and io_phys by the boot code. - * To fit in with the io_pg_offset calculation, the io base address selected - * here _must_ be a multiple of 2^20. - */ -#define TNETV107X_IO_BASE 0x08000000 -#define TNETV107X_IO_VIRT (IO_VIRT + SZ_1M) - -#define TNETV107X_N_GPIO 65 - -#ifndef __ASSEMBLY__ - -#include <linux/serial_8250.h> -#include <linux/input/matrix_keypad.h> -#include <linux/mfd/ti_ssp.h> - -#include <mach/mmc.h> -#include <mach/nand.h> -#include <mach/serial.h> - -struct tnetv107x_device_info { - struct davinci_uart_config *serial_config; - struct davinci_mmc_config *mmc_config[2]; /* 2 controllers */ - struct davinci_nand_pdata *nand_config[4]; /* 4 chipsels */ - struct matrix_keypad_platform_data *keypad_config; - struct ti_ssp_data *ssp_config; -}; - -extern struct platform_device tnetv107x_wdt_device; -extern struct platform_device tnetv107x_serial_device; - -extern void __init tnetv107x_init(void); -extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *); -extern void __init tnetv107x_irq_init(void); -void tnetv107x_restart(char mode, const char *cmd); - -#endif - -#endif /* __ASM_ARCH_DAVINCI_TNETV107X_H */ diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 9dc7cf9664f..8fb97b93b6b 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -25,11 +25,16 @@ #include <mach/serial.h> +#define IOMEM(x) ((void __force __iomem *)(x)) + u32 *uart; /* PORT_16C550A, in polled non-fifo mode */ static void putc(char c) { + if (!uart) + return; + while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); uart[UART_TX] = c; @@ -37,41 +42,31 @@ static void putc(char c) static inline void flush(void) { + if (!uart) + return; + while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); } -static inline void set_uart_info(u32 phys, void * __iomem virt) +static inline void set_uart_info(u32 phys) { - /* - * Get address of some.bss variable and round it down - * a la CONFIG_AUTO_ZRELADDR. - */ - u32 ram_start = (u32)&uart & 0xf8000000; - u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS); - uart = (u32 *)phys; - uart_info[0] = phys; - uart_info[1] = (u32)virt; } -#define _DEBUG_LL_ENTRY(machine, phys, virt) \ - if (machine_is_##machine()) { \ - set_uart_info(phys, virt); \ - break; \ +#define _DEBUG_LL_ENTRY(machine, phys) \ + { \ + if (machine_is_##machine()) { \ + set_uart_info(phys); \ + break; \ + } \ } #define DEBUG_LL_DAVINCI(machine, port) \ - _DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE, \ - IO_ADDRESS(DAVINCI_UART##port##_BASE)) + _DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE) #define DEBUG_LL_DA8XX(machine, port) \ - _DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE, \ - IO_ADDRESS(DA8XX_UART##port##_BASE)) - -#define DEBUG_LL_TNETV107X(machine, port) \ - _DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE, \ - TNETV107X_UART##port##_VIRT) + _DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE) static inline void __arch_decomp_setup(unsigned long arch_id) { @@ -96,11 +91,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_DA8XX(davinci_da850_evm, 2); DEBUG_LL_DA8XX(mityomapl138, 1); DEBUG_LL_DA8XX(omapl138_hawkboard, 2); - - /* TNETV107x boards */ - DEBUG_LL_TNETV107X(tnetv107x, 1); } while (0); } #define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() diff --git a/arch/arm/mach-davinci/include/mach/usb.h b/arch/arm/mach-davinci/include/mach/usb.h deleted file mode 100644 index e0bc4abe69c..00000000000 --- a/arch/arm/mach-davinci/include/mach/usb.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * USB related definitions - * - * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_USB_H -#define __ASM_ARCH_USB_H - -/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */ -#define CFGCHIP2_PHYCLKGD (1 << 17) -#define CFGCHIP2_VBUSSENSE (1 << 16) -#define CFGCHIP2_RESET (1 << 15) -#define CFGCHIP2_OTGMODE (3 << 13) -#define CFGCHIP2_NO_OVERRIDE (0 << 13) -#define CFGCHIP2_FORCE_HOST (1 << 13) -#define CFGCHIP2_FORCE_DEVICE (2 << 13) -#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13) -#define CFGCHIP2_USB1PHYCLKMUX (1 << 12) -#define CFGCHIP2_USB2PHYCLKMUX (1 << 11) -#define CFGCHIP2_PHYPWRDN (1 << 10) -#define CFGCHIP2_OTGPWRDN (1 << 9) -#define CFGCHIP2_DATPOL (1 << 8) -#define CFGCHIP2_USB1SUSPENDM (1 << 7) -#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */ -#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */ -#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */ -#define CFGCHIP2_REFFREQ (0xf << 0) -#define CFGCHIP2_REFFREQ_12MHZ (1 << 0) -#define CFGCHIP2_REFFREQ_24MHZ (2 << 0) -#define CFGCHIP2_REFFREQ_48MHZ (3 << 0) - -struct da8xx_ohci_root_hub; - -typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub, - unsigned port); - -/* Passed as the platform data to the OHCI driver */ -struct da8xx_ohci_root_hub { - /* Switch the port power on/off */ - int (*set_power)(unsigned port, int on); - /* Read the port power status */ - int (*get_power)(unsigned port); - /* Read the port over-current indicator */ - int (*get_oci)(unsigned port); - /* Over-current indicator change notification (pass NULL to disable) */ - int (*ocic_notify)(da8xx_ocic_handler_t handler); - - /* Time from power on to power good (in 2 ms units) */ - u8 potpgt; -}; - -void davinci_setup_usb(unsigned mA, unsigned potpgt_ms); - -#endif /* ifndef __ASM_ARCH_USB_H */ |