diff options
Diffstat (limited to 'arch/arm/mach-davinci/board-dm365-evm.c')
| -rw-r--r-- | arch/arm/mach-davinci/board-dm365-evm.c | 184 |
1 files changed, 173 insertions, 11 deletions
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 5d49c75388c..e08a8684ead 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -18,7 +18,7 @@ #include <linux/i2c.h> #include <linux/io.h> #include <linux/clk.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/leds.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -27,6 +27,7 @@ #include <linux/input.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> +#include <linux/v4l2-dv-timings.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,6 +40,7 @@ #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/keyscan-davinci.h> +#include <media/ths7303.h> #include <media/tvp514x.h> #include "davinci.h" @@ -174,7 +176,7 @@ static struct at24_platform_data eeprom_info = { .context = (void *)0x7f00, }; -static struct snd_platform_data dm365_evm_snd_data = { +static struct snd_platform_data dm365_evm_snd_data __maybe_unused = { .asp_chan_q = EVENTQ_3, }; @@ -253,7 +255,6 @@ static struct davinci_mmc_config dm365evm_mmc_config = { .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .version = MMC_CTLR_VERSION_2, }; static void dm365evm_emac_configure(void) @@ -374,6 +375,165 @@ static struct vpfe_config vpfe_cfg = { .ccdc = "ISIF", }; +/* venc standards timings */ +static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = { + { + .name = "ntsc", + .timings_type = VPBE_ENC_STD, + .std_id = V4L2_STD_NTSC, + .interlaced = 1, + .xres = 720, + .yres = 480, + .aspect = {11, 10}, + .fps = {30000, 1001}, + .left_margin = 0x79, + .upper_margin = 0x10, + }, + { + .name = "pal", + .timings_type = VPBE_ENC_STD, + .std_id = V4L2_STD_PAL, + .interlaced = 1, + .xres = 720, + .yres = 576, + .aspect = {54, 59}, + .fps = {25, 1}, + .left_margin = 0x7E, + .upper_margin = 0x16, + }, +}; + +/* venc dv timings */ +static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = { + { + .name = "480p59_94", + .timings_type = VPBE_ENC_DV_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, + .interlaced = 0, + .xres = 720, + .yres = 480, + .aspect = {1, 1}, + .fps = {5994, 100}, + .left_margin = 0x8F, + .upper_margin = 0x2D, + }, + { + .name = "576p50", + .timings_type = VPBE_ENC_DV_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_720X576P50, + .interlaced = 0, + .xres = 720, + .yres = 576, + .aspect = {1, 1}, + .fps = {50, 1}, + .left_margin = 0x8C, + .upper_margin = 0x36, + }, + { + .name = "720p60", + .timings_type = VPBE_ENC_DV_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_1280X720P60, + .interlaced = 0, + .xres = 1280, + .yres = 720, + .aspect = {1, 1}, + .fps = {60, 1}, + .left_margin = 0x117, + .right_margin = 70, + .upper_margin = 38, + .lower_margin = 3, + .hsync_len = 80, + .vsync_len = 5, + }, + { + .name = "1080i60", + .timings_type = VPBE_ENC_DV_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_1920X1080I60, + .interlaced = 1, + .xres = 1920, + .yres = 1080, + .aspect = {1, 1}, + .fps = {30, 1}, + .left_margin = 0xc9, + .right_margin = 80, + .upper_margin = 30, + .lower_margin = 3, + .hsync_len = 88, + .vsync_len = 5, + }, +}; + +#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) + +/* + * The outputs available from VPBE + ecnoders. Keep the + * the order same as that of encoders. First those from venc followed by that + * from encoders. Index in the output refers to index on a particular + * encoder.Driver uses this index to pass it to encoder when it supports more + * than one output. Application uses index of the array to set an output. + */ +static struct vpbe_output dm365evm_vpbe_outputs[] = { + { + .output = { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = VENC_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + .subdev_name = DM365_VPBE_VENC_SUBDEV_NAME, + .default_mode = "ntsc", + .num_modes = ARRAY_SIZE(dm365evm_enc_std_timing), + .modes = dm365evm_enc_std_timing, + .if_params = V4L2_MBUS_FMT_FIXED, + }, + { + .output = { + .index = 1, + .name = "Component", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_DV_TIMINGS, + }, + .subdev_name = DM365_VPBE_VENC_SUBDEV_NAME, + .default_mode = "480p59_94", + .num_modes = ARRAY_SIZE(dm365evm_enc_preset_timing), + .modes = dm365evm_enc_preset_timing, + .if_params = V4L2_MBUS_FMT_FIXED, + }, +}; + +/* + * Amplifiers on the board + */ +static struct ths7303_platform_data ths7303_pdata = { + .ch_1 = 3, + .ch_2 = 3, + .ch_3 = 3, +}; + +static struct amp_config_info vpbe_amp = { + .module_name = "ths7303", + .is_i2c = 1, + .board_info = { + I2C_BOARD_INFO("ths7303", 0x2c), + .platform_data = &ths7303_pdata, + } +}; + +static struct vpbe_config dm365evm_display_cfg = { + .module_name = "dm365-vpbe-display", + .i2c_adapter_id = 1, + .amp = &vpbe_amp, + .osd = { + .module_name = DM365_VPBE_OSD_SUBDEV_NAME, + }, + .venc = { + .module_name = DM365_VPBE_VENC_SUBDEV_NAME, + }, + .num_outputs = ARRAY_SIZE(dm365evm_vpbe_outputs), + .outputs = dm365evm_vpbe_outputs, +}; + static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); @@ -558,14 +718,8 @@ fail: /* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */ } -static struct davinci_uart_config uart_config __initdata = { - .enabled_uarts = (1 << 0), -}; - static void __init dm365_evm_map_io(void) { - /* setup input configuration for VPFE input devices */ - dm365_set_vpfe_config(&vpfe_cfg); dm365_init(); } @@ -589,14 +743,22 @@ static struct spi_board_info dm365_evm_spi_info[] __initconst = { static __init void dm365_evm_init(void) { + int ret; + + ret = dm365_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + evm_init_i2c(); - davinci_serial_init(&uart_config); + davinci_serial_init(dm365_serial_device); dm365evm_emac_configure(); dm365evm_mmc_configure(); davinci_setup_mmc(0, &dm365evm_mmc_config); + dm365_init_video(&vpfe_cfg, &dm365evm_display_cfg); + /* maybe setup mmc1/etc ... _after_ mmc0 */ evm_init_cpld(); @@ -616,7 +778,7 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM") .atag_offset = 0x100, .map_io = dm365_evm_map_io, .init_irq = davinci_irq_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = dm365_evm_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, |