diff options
Diffstat (limited to 'arch/arm/mach-at91rm9200/irq.c')
| -rw-r--r-- | arch/arm/mach-at91rm9200/irq.c | 170 |
1 files changed, 0 insertions, 170 deletions
diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c deleted file mode 100644 index cb62bc83a1d..00000000000 --- a/arch/arm/mach-at91rm9200/irq.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * linux/arch/arm/mach-at91rm9200/irq.c - * - * Copyright (C) 2004 SAN People - * Copyright (C) 2004 ATMEL - * Copyright (C) Rick Bronson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/config.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/types.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/setup.h> - -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> - -#include "generic.h" - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripheral */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ - 0, /* Parallel IO Controller D */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ - 6, /* USART 3 */ - 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface */ - 5, /* Serial Synchronous Controller */ - 5, /* Serial Synchronous Controller */ - 5, /* Serial Synchronous Controller */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 0, /* Timer Counter 3 */ - 0, /* Timer Counter 4 */ - 0, /* Timer Counter 5 */ - 3, /* USB Host port */ - 3, /* Ethernet MAC */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0 /* Advanced Interrupt Controller */ -}; - - -static void at91rm9200_mask_irq(unsigned int irq) -{ - /* Disable interrupt on AIC */ - at91_sys_write(AT91_AIC_IDCR, 1 << irq); -} - -static void at91rm9200_unmask_irq(unsigned int irq) -{ - /* Enable interrupt on AIC */ - at91_sys_write(AT91_AIC_IECR, 1 << irq); -} - -static int at91rm9200_irq_type(unsigned irq, unsigned type) -{ - unsigned int smr, srctype; - - /* change triggering only for FIQ and external IRQ0..IRQ6 */ - if ((irq < AT91_ID_IRQ0) && (irq != AT91_ID_FIQ)) - return -EINVAL; - - switch (type) { - case IRQT_HIGH: - srctype = AT91_AIC_SRCTYPE_HIGH; - break; - case IRQT_RISING: - srctype = AT91_AIC_SRCTYPE_RISING; - break; - case IRQT_LOW: - srctype = AT91_AIC_SRCTYPE_LOW; - break; - case IRQT_FALLING: - srctype = AT91_AIC_SRCTYPE_FALLING; - break; - default: - return -EINVAL; - } - - smr = at91_sys_read(AT91_AIC_SMR(irq)) & ~AT91_AIC_SRCTYPE; - at91_sys_write(AT91_AIC_SMR(irq), smr | srctype); - return 0; -} - -static struct irqchip at91rm9200_irq_chip = { - .ack = at91rm9200_mask_irq, - .mask = at91rm9200_mask_irq, - .unmask = at91rm9200_unmask_irq, - .set_type = at91rm9200_irq_type, -}; - -/* - * Initialize the AIC interrupt controller. - */ -void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS]) -{ - unsigned int i; - - /* No priority list specified for this board -> use defaults */ - if (priority == NULL) - priority = at91rm9200_default_irq_priority; - - /* - * The IVR is used by macro get_irqnr_and_base to read and verify. - * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred. - */ - for (i = 0; i < NR_AIC_IRQS; i++) { - /* Put irq number in Source Vector Register: */ - at91_sys_write(AT91_AIC_SVR(i), i); - /* Store the Source Mode Register as defined in table above */ - at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); - - set_irq_chip(i, &at91rm9200_irq_chip); - set_irq_handler(i, do_level_IRQ); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - - /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */ - if (i < 8) - at91_sys_write(AT91_AIC_EOICR, 0); - } - - /* - * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS - * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU - */ - at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS); - - /* No debugging in AIC: Debug (Protect) Control Register */ - at91_sys_write(AT91_AIC_DCR, 0); - - /* Disable and clear all interrupts initially */ - at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF); - at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF); -} |