1 files changed, 41 insertions, 35 deletions

diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 89f56f3a802..c5101dcb4fb 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -11,10 +11,17 @@
 #ifndef __ARCH_ARM_MACH_AT91_PM
 #define __ARCH_ARM_MACH_AT91_PM
 
+#include <asm/proc-fns.h>
+
 #include <mach/at91_ramc.h>
-#ifdef CONFIG_ARCH_AT91RM9200
 #include <mach/at91rm9200_sdramc.h>
 
+#ifdef CONFIG_PM
+extern void at91_pm_set_standby(void (*at91_standby)(void));
+#else
+static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
+#endif
+
 /*
  * The AT91RM9200 goes into self-refresh mode with this command, and will
  * terminate self-refresh automatically on the next SDRAM access.
@@ -43,23 +50,21 @@ static inline void at91rm9200_standby(void)
 		  "r" (lpr));
 }
 
-#define at91_standby at91rm9200_standby
-
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
-
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
-static inline void at91sam9g45_standby(void)
+static inline void at91_ddr_standby(void)
 {
 	/* Those two values allow us to delay self-refresh activation
 	 * to the maximum. */
-	u32 lpr0, lpr1;
-	u32 saved_lpr0, saved_lpr1;
+	u32 lpr0, lpr1 = 0;
+	u32 saved_lpr0, saved_lpr1 = 0;
 
-	saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
-	lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
-	lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+	if (at91_ramc_base[1]) {
+		saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+		lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+		lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+	}
 
 	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
 	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
@@ -67,43 +72,44 @@ static inline void at91sam9g45_standby(void)
 
 	/* self-refresh mode now */
 	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
-	at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
 
 	cpu_do_idle();
 
 	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
-	at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 }
 
-#define at91_standby at91sam9g45_standby
-
-#else
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
  */
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
-
-static inline void at91sam9_standby(void)
+static inline void at91sam9_sdram_standby(void)
 {
-	u32 saved_lpr, lpr;
+	u32 lpr0, lpr1 = 0;
+	u32 saved_lpr0, saved_lpr1 = 0;
 
-	saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
+	if (at91_ramc_base[1]) {
+		saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
+		lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
+		lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+	}
 
-	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr |
-			AT91_SDRAMC_LPCB_SELF_REFRESH);
+	saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
+	lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
+	lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+
+	/* self-refresh mode now */
+	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
 
 	cpu_do_idle();
 
-	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
+	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
 }
 
-#define at91_standby at91sam9_standby
-
-#endif
-
 #endif