diff options
Diffstat (limited to 'arch/arm/mach-at91/include/mach/hardware.h')
| -rw-r--r-- | arch/arm/mach-at91/include/mach/hardware.h | 48 |
1 files changed, 26 insertions, 22 deletions
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 2d0e4e99856..56338245653 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -19,30 +19,22 @@ /* DBGU base */ /* rm9200, 9260/9g20, 9261/9g10, 9rl */ #define AT91_BASE_DBGU0 0xfffff200 -/* 9263, 9g45, cap9 */ +/* 9263, 9g45 */ #define AT91_BASE_DBGU1 0xffffee00 -#if defined(CONFIG_ARCH_AT91RM9200) +#if defined(CONFIG_ARCH_AT91X40) +#include <mach/at91x40.h> +#else #include <mach/at91rm9200.h> -#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) #include <mach/at91sam9260.h> -#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10) #include <mach/at91sam9261.h> -#elif defined(CONFIG_ARCH_AT91SAM9263) #include <mach/at91sam9263.h> -#elif defined(CONFIG_ARCH_AT91SAM9RL) #include <mach/at91sam9rl.h> -#elif defined(CONFIG_ARCH_AT91SAM9G45) #include <mach/at91sam9g45.h> -#elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91cap9.h> -#elif defined(CONFIG_ARCH_AT91X40) -#include <mach/at91x40.h> -#else -#error "Unsupported AT91 processor" -#endif +#include <mach/at91sam9x5.h> +#include <mach/at91sam9n12.h> +#include <mach/sama5d3.h> -#if !defined(CONFIG_ARCH_AT91X40) /* * On all at91 except rm9200 and x40 have the System Controller starts * at address 0xffffc000 and has a size of 16KiB. @@ -59,9 +51,10 @@ /* * On all at91 have the Advanced Interrupt Controller starts at address - * 0xfffff000 + * 0xfffff000 and the Power Management Controller starts at 0xfffffc00 */ #define AT91_AIC 0xfffff000 +#define AT91_PMC 0xfffffc00 /* * Peripheral identifiers/interrupts. @@ -75,13 +68,13 @@ * to 0xFEF78000 .. 0xFF000000. (544Kb) */ #define AT91_IO_PHYS_BASE 0xFFF78000 -#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE) +#define AT91_IO_VIRT_BASE IOMEM(0xFF000000 - AT91_IO_SIZE) #else /* * Identity mapping for the non MMU case. */ #define AT91_IO_PHYS_BASE AT91_BASE_SYS -#define AT91_IO_VIRT_BASE AT91_IO_PHYS_BASE +#define AT91_IO_VIRT_BASE IOMEM(AT91_IO_PHYS_BASE) #endif #define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1) @@ -93,15 +86,11 @@ * Virtual to Physical Address mapping for IO devices. */ #define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) -#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC) /* Internal SRAM is mapped below the IO devices */ #define AT91_SRAM_MAX SZ_1M #define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX) -/* Serial ports */ -#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */ - /* External Memory Map */ #define AT91_CHIPSELECT_0 0x10000000 #define AT91_CHIPSELECT_1 0x20000000 @@ -115,5 +104,20 @@ /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ +/* + * FIXME: this is needed to communicate between the pinctrl driver and + * the PM implementation in the machine. Possibly part of the PM + * implementation should be moved down into the pinctrl driver and get + * called as part of the generic suspend/resume path. + */ +#ifndef __ASSEMBLY__ +#ifdef CONFIG_PINCTRL_AT91 +extern void at91_pinctrl_gpio_suspend(void); +extern void at91_pinctrl_gpio_resume(void); +#else +static inline void at91_pinctrl_gpio_suspend(void) {} +static inline void at91_pinctrl_gpio_resume(void) {} +#endif +#endif #endif |