1 files changed, 25 insertions, 23 deletions

diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index e1bea73e6b3..1ea61328f30 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -27,6 +27,8 @@
 #include <linux/atmel-mci.h>
 #include <linux/delay.h>
 
+#include <linux/platform_data/at91_adc.h>
+
 #include <mach/hardware.h>
 #include <video/atmel_lcdc.h>
 #include <media/soc_camera.h>
@@ -40,29 +42,21 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
 #include <mach/system_rev.h>
 
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91_initialize(12000000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 not connected on the -EK board */
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -71,6 +65,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_hs_data = {
 	.ports		= 2,
 	.vbus_pin	= {AT91_PIN_PD1, AT91_PIN_PD3},
+	.vbus_pin_active_low = {1, 1},
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
@@ -290,7 +285,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
 /* Driver datas */
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight		= true,
 	.default_bpp			= 32,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -301,20 +296,20 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 };
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
 /*
- * Touchscreen
+ * ADCs and touchscreen
  */
-static struct at91_tsadcc_data ek_tsadcc_data = {
-	.adc_clock		= 300000,
-	.pendet_debounce	= 0x0d,
-	.ts_sample_hold_time	= 0x0a,
+static struct at91_adc_data ek_adc_data = {
+	.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
+	.use_external_triggers = true,
+	.vref = 3300,
+	.touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
 };
 
-
 /*
  * GPIO Buttons
  */
@@ -456,6 +451,12 @@ static struct platform_device *devices[] __initdata = {
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 not connected on the -EK board */
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB HS Host */
 	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
@@ -477,8 +478,8 @@ static void __init ek_board_init(void)
 	at91_add_device_isi(&isi_data, true);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
-	/* Touch Screen */
-	at91_add_device_tsadcc(&ek_tsadcc_data);
+	/* ADC and touchscreen */
+	at91_add_device_adc(&ek_adc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* AC97 */
@@ -492,8 +493,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
+	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
 	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,