1 files changed, 21 insertions, 20 deletions

diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 13ebaa8e410..4637432de08 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -53,6 +53,7 @@
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init ek_init_early(void)
@@ -264,11 +265,7 @@ static void __init ek_add_device_ts(void) {}
  */
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 1,
-#if defined(CONFIG_MACH_AT91SAM9261EK)
-	.shortname	= "AT91SAM9261-EK external DAC",
-#else
-	.shortname	= "AT91SAM9G10-EK external DAC",
-#endif
+	.shortname	= "AT91SAM9261/9G10-EK external DAC",
 };
 
 #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
@@ -393,7 +390,7 @@ static struct fb_monspecs at91fb_default_stn_monspecs = {
 					| ATMEL_LCDC_IFWIDTH_4 \
 					| ATMEL_LCDC_SCANMOD_SINGLE)
 
-static void at91_lcdc_stn_power_control(int on)
+static void at91_lcdc_stn_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	/* backlight */
 	if (on) {	/* power up */
@@ -405,16 +402,13 @@ static void at91_lcdc_stn_power_control(int on)
 	}
 }
 
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.default_bpp			= 1,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
 	.default_lcdcon2		= AT91SAM9261_DEFAULT_STN_LCDCON2,
 	.default_monspecs		= &at91fb_default_stn_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_stn_power_control,
 	.guard_time			= 1,
-#if defined(CONFIG_MACH_AT91SAM9G10EK)
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
-#endif
 };
 
 #else
@@ -452,7 +446,7 @@ static struct fb_monspecs at91fb_default_tft_monspecs = {
 					| ATMEL_LCDC_DISTYPE_TFT    \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
-static void at91_lcdc_tft_power_control(int on)
+static void at91_lcdc_tft_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	if (on)
 		at91_set_gpio_value(AT91_PIN_PA12, 0);	/* power up */
@@ -460,7 +454,7 @@ static void at91_lcdc_tft_power_control(int on)
 		at91_set_gpio_value(AT91_PIN_PA12, 1);	/* power down */
 }
 
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight		= true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -468,14 +462,11 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_tft_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_tft_power_control,
 	.guard_time			= 1,
-#if defined(CONFIG_MACH_AT91SAM9G10EK)
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
-#endif
 };
 #endif
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
@@ -574,6 +565,10 @@ static void __init ek_board_init(void)
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
+
+	if (cpu_is_at91sam9g10())
+		ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB;
+
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
 	/* USB Device */
@@ -606,13 +601,19 @@ static void __init ek_board_init(void)
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
-#if defined(CONFIG_MACH_AT91SAM9261EK)
 MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-#else
+	/* Maintainer: Atmel */
+	.init_time	= at91sam926x_pit_init,
+	.map_io		= at91_map_io,
+	.handle_irq	= at91_aic_handle_irq,
+	.init_early	= ek_init_early,
+	.init_irq	= at91_init_irq_default,
+	.init_machine	= ek_board_init,
+MACHINE_END
+
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
-#endif
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,