1 files changed, 34 insertions, 34 deletions

diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 0487ea10c2d..597c649170a 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -43,31 +43,16 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
-
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init afeb9260_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-			     ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR
-			   | ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-			ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -75,6 +60,8 @@ static void __init afeb9260_init_early(void)
  */
 static struct at91_usbh_data __initdata afeb9260_usbh_data = {
 	.ports		= 1,
+	.vbus_pin	= {-EINVAL, -EINVAL},
+	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -82,7 +69,7 @@ static struct at91_usbh_data __initdata afeb9260_usbh_data = {
  */
 static struct at91_udc_data __initdata afeb9260_udc_data = {
 	.vbus_pin	= AT91_PIN_PC5,
-	.pullup_pin	= 0,		/* pull-up driven by UDC */
+	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
 };
 
 
@@ -103,7 +90,7 @@ static struct spi_board_info afeb9260_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata afeb9260_macb_data = {
+static struct macb_platform_data __initdata afeb9260_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA9,
 	.is_rmii	= 0,
 };
@@ -130,30 +117,28 @@ static struct mtd_partition __initdata afeb9260_nand_partition[] = {
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(afeb9260_nand_partition);
-	return afeb9260_nand_partition;
-}
-
 static struct atmel_nand_data __initdata afeb9260_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
 	.bus_width_16	= 0,
+	.ecc_mode	= NAND_ECC_SOFT,
+	.parts		= afeb9260_nand_partition,
+	.num_parts	= ARRAY_SIZE(afeb9260_nand_partition),
+	.det_pin	= -EINVAL,
 };
 
 
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata afeb9260_mmc_data = {
-	.det_pin 	= AT91_PIN_PC9,
-	.wp_pin 	= AT91_PIN_PC4,
-	.slot_b		= 1,
-	.wire4		= 1,
+static struct mci_platform_data __initdata afeb9260_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC9,
+		.wp_pin		= AT91_PIN_PC4,
+	},
 };
 
 
@@ -174,6 +159,8 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 static struct at91_cf_data afeb9260_cf_data = {
 	.chipselect = 4,
 	.irq_pin    = AT91_PIN_PA6,
+	.det_pin	= -EINVAL,
+	.vcc_pin	= -EINVAL,
 	.rst_pin    = AT91_PIN_PA7,
 	.flags      = AT91_CF_TRUE_IDE,
 };
@@ -181,6 +168,18 @@ static struct at91_cf_data afeb9260_cf_data = {
 static void __init afeb9260_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+			     ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR
+			   | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+			ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&afeb9260_usbh_data);
@@ -200,7 +199,7 @@ static void __init afeb9260_board_init(void)
 	at91_set_B_periph(AT91_PIN_PA10, 0);	/* ETX2 */
 	at91_set_B_periph(AT91_PIN_PA11, 0);	/* ETX3 */
 	/* MMC */
-	at91_add_device_mmc(0, &afeb9260_mmc_data);
+	at91_add_device_mci(0, &afeb9260_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(afeb9260_i2c_devices,
 			ARRAY_SIZE(afeb9260_i2c_devices));
@@ -212,8 +211,9 @@ static void __init afeb9260_board_init(void)
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
 	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
+	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= afeb9260_init_early,
 	.init_irq	= at91_init_irq_default,
 	.init_machine	= afeb9260_board_init,