diff options
Diffstat (limited to 'arch/arm/mach-at91/at91sam9263_devices.c')
| -rw-r--r-- | arch/arm/mach-at91/at91sam9263_devices.c | 381 |
1 files changed, 239 insertions, 142 deletions
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 366a7765635..309390d8e2f 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -20,12 +20,15 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/board.h> #include <mach/at91sam9263.h> #include <mach/at91sam9263_matrix.h> +#include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> +#include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -43,8 +46,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_UHP, - .end = AT91SAM9263_ID_UHP, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -71,12 +74,13 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); + at91_set_gpio_output(data->vbus_pin[i], + data->vbus_pin_active_low[i]); } /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -102,8 +106,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_UDP, - .end = AT91SAM9263_ID_UDP, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -153,8 +157,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_EMAC, - .end = AT91SAM9263_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -216,9 +220,9 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc0_data, mmc1_data; +static struct mci_platform_data mmc0_data, mmc1_data; static struct resource mmc0_resources[] = { [0] = { @@ -227,14 +231,14 @@ static struct resource mmc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_MCI0, - .end = AT91SAM9263_ID_MCI0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, .flags = IORESOURCE_IRQ, }, }; static struct platform_device at91sam9263_mmc0_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = 0, .dev = { .dma_mask = &mmc_dmamask, @@ -252,14 +256,14 @@ static struct resource mmc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_MCI1, - .end = AT91SAM9263_ID_MCI1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, .flags = IORESOURCE_IRQ, }, }; static struct platform_device at91sam9263_mmc1_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = 1, .dev = { .dma_mask = &mmc_dmamask, @@ -270,85 +274,110 @@ static struct platform_device at91sam9263_mmc1_device = { .num_resources = ARRAY_SIZE(mmc1_resources), }; -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) { + unsigned int i; + unsigned int slot_count = 0; + if (!data) return; - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - if (mmc_id == 0) { /* MCI0 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA12, 0); + if (!data->slot[i].bus_width) + continue; - if (data->slot_b) { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA16, 1); + /* input/irq */ + if (gpio_is_valid(data->slot[i].detect_pin)) { + at91_set_gpio_input(data->slot[i].detect_pin, + 1); + at91_set_deglitch(data->slot[i].detect_pin, + 1); + } + if (gpio_is_valid(data->slot[i].wp_pin)) + at91_set_gpio_input(data->slot[i].wp_pin, 1); + + if (mmc_id == 0) { /* MCI0 */ + switch (i) { + case 0: /* slot A */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA1, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA0, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA3, 1); + at91_set_A_periph(AT91_PIN_PA4, 1); + at91_set_A_periph(AT91_PIN_PA5, 1); + } + slot_count++; + break; + case 1: /* slot B */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA16, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA17, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA18, 1); + at91_set_A_periph(AT91_PIN_PA19, 1); + at91_set_A_periph(AT91_PIN_PA20, 1); + } + slot_count++; + break; + default: + printk(KERN_ERR + "AT91: SD/MMC slot %d not available\n", i); + break; + } + if (slot_count) { + /* CLK */ + at91_set_A_periph(AT91_PIN_PA12, 0); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA17, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA18, 1); - at91_set_A_periph(AT91_PIN_PA19, 1); - at91_set_A_periph(AT91_PIN_PA20, 1); + mmc0_data = *data; + platform_device_register(&at91sam9263_mmc0_device); } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); + } else if (mmc_id == 1) { /* MCI1 */ + switch (i) { + case 0: /* slot A */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA7, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA8, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA9, 1); + at91_set_A_periph(AT91_PIN_PA10, 1); + at91_set_A_periph(AT91_PIN_PA11, 1); + } + slot_count++; + break; + case 1: /* slot B */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA21, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA22, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA23, 1); + at91_set_A_periph(AT91_PIN_PA24, 1); + at91_set_A_periph(AT91_PIN_PA25, 1); + } + slot_count++; + break; + default: + printk(KERN_ERR + "AT91: SD/MMC slot %d not available\n", i); + break; } - } + if (slot_count) { + /* CLK */ + at91_set_A_periph(AT91_PIN_PA6, 0); - mmc0_data = *data; - platform_device_register(&at91sam9263_mmc0_device); - } else { /* MCI1 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA6, 0); - - if (data->slot_b) { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA21, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA22, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA23, 1); - at91_set_A_periph(AT91_PIN_PA24, 1); - at91_set_A_periph(AT91_PIN_PA25, 1); - } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA7, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA8, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA9, 1); - at91_set_A_periph(AT91_PIN_PA10, 1); - at91_set_A_periph(AT91_PIN_PA11, 1); + mmc1_data = *data; + platform_device_register(&at91sam9263_mmc1_device); } } - - mmc1_data = *data; - platform_device_register(&at91sam9263_mmc1_device); } } #else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} #endif /* -------------------------------------------------------------------- @@ -409,7 +438,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) * we assume SMC timings are configured by board code, * except True IDE where timings are controlled by driver */ - ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA); + ebi0_csa = at91_matrix_read(AT91_MATRIX_EBI0CSA); switch (data->chipselect) { case 4: at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */ @@ -428,7 +457,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) data->chipselect); return; } - at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa); + at91_matrix_write(AT91_MATRIX_EBI0CSA, ebi0_csa); if (gpio_is_valid(data->det_pin)) { at91_set_gpio_input(data->det_pin, 1); @@ -496,8 +525,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBI0CSA); - at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); + csa = at91_matrix_read(AT91_MATRIX_EBI0CSA); + at91_matrix_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (gpio_is_valid(data->enable_pin)) @@ -540,7 +569,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -565,15 +594,15 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_TWI, - .end = AT91SAM9263_ID_TWI, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, .flags = IORESOURCE_IRQ, }, }; static struct platform_device at91sam9263_twi_device = { - .name = "at91_i2c", - .id = -1, + .name = "i2c-at91sam9260", + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; @@ -609,8 +638,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SPI0, - .end = AT91SAM9263_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -635,8 +664,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SPI1, - .end = AT91SAM9263_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -670,6 +699,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi1_standard_cs[devices[i].chip_select]; + if (!gpio_is_valid(cs_pin)) + continue; + if (devices[i].bus_num == 0) enable_spi0 = 1; else @@ -720,8 +752,8 @@ static struct resource ac97_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_AC97C, - .end = AT91SAM9263_ID_AC97C, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, .flags = IORESOURCE_IRQ, }, }; @@ -771,8 +803,8 @@ static struct resource can_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_CAN, - .end = AT91SAM9263_ID_CAN, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, .flags = IORESOURCE_IRQ, }, }; @@ -802,7 +834,7 @@ void __init at91_add_device_can(struct at91_can_data *data) {} #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) static u64 lcdc_dmamask = DMA_BIT_MASK(32); -static struct atmel_lcdfb_info lcdc_data; +static struct atmel_lcdfb_pdata lcdc_data; static struct resource lcdc_resources[] = { [0] = { @@ -811,14 +843,14 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_LCDC, - .end = AT91SAM9263_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, .flags = IORESOURCE_IRQ, }, }; static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", + .name = "at91sam9263-lcdfb", .id = 0, .dev = { .dma_mask = &lcdc_dmamask, @@ -829,7 +861,7 @@ static struct platform_device at91_lcdc_device = { .num_resources = ARRAY_SIZE(lcdc_resources), }; -void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) +void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) { if (!data) return; @@ -861,7 +893,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) platform_device_register(&at91_lcdc_device); } #else -void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} +void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {} #endif @@ -878,8 +910,8 @@ struct resource isi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_ISI, - .end = AT91SAM9263_ID_ISI, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, .flags = IORESOURCE_IRQ, }, }; @@ -891,7 +923,8 @@ static struct platform_device at91sam9263_isi_device = { .num_resources = ARRAY_SIZE(isi_resources), }; -void __init at91_add_device_isi(void) +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) { at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */ @@ -904,14 +937,20 @@ void __init at91_add_device_isi(void) at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */ - at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */ + + if (use_pck_as_mck) { + at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ + + /* TODO: register the PCK for ISI_MCK and set its parent */ + } } #else -void __init at91_add_device_isi(void) {} +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) {} #endif @@ -928,8 +967,8 @@ static struct resource tcb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_TCB, - .end = AT91SAM9263_ID_TCB, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, .flags = IORESOURCE_IRQ, }, }; @@ -941,8 +980,25 @@ static struct platform_device at91sam9263_tcb_device = { .num_resources = ARRAY_SIZE(tcb_resources), }; +#if defined(CONFIG_OF) +static struct of_device_id tcb_ids[] = { + { .compatible = "atmel,at91rm9200-tcb" }, + { /*sentinel*/ } +}; +#endif + static void __init at91_add_device_tc(void) { +#if defined(CONFIG_OF) + struct device_node *np; + + np = of_find_matching_node(NULL, tcb_ids); + if (np) { + of_node_put(np); + return; + } +#endif + platform_device_register(&at91sam9263_tcb_device); } #else @@ -959,6 +1015,10 @@ static struct resource rtt0_resources[] = { .start = AT91SAM9263_BASE_RTT0, .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -966,7 +1026,6 @@ static struct platform_device at91sam9263_rtt0_device = { .name = "at91_rtt", .id = 0, .resource = rtt0_resources, - .num_resources = ARRAY_SIZE(rtt0_resources), }; static struct resource rtt1_resources[] = { @@ -974,6 +1033,10 @@ static struct resource rtt1_resources[] = { .start = AT91SAM9263_BASE_RTT1, .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -981,11 +1044,55 @@ static struct platform_device at91sam9263_rtt1_device = { .name = "at91_rtt", .id = 1, .resource = rtt1_resources, - .num_resources = ARRAY_SIZE(rtt1_resources), }; +#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) +static void __init at91_add_device_rtt_rtc(void) +{ + struct platform_device *pdev; + struct resource *r; + + switch (CONFIG_RTC_DRV_AT91SAM9_RTT) { + case 0: + /* + * The second resource is needed only for the chosen RTT: + * GPBR will serve as the storage for RTC time offset + */ + at91sam9263_rtt0_device.num_resources = 3; + at91sam9263_rtt1_device.num_resources = 1; + pdev = &at91sam9263_rtt0_device; + r = rtt0_resources; + break; + case 1: + at91sam9263_rtt0_device.num_resources = 1; + at91sam9263_rtt1_device.num_resources = 3; + pdev = &at91sam9263_rtt1_device; + r = rtt1_resources; + break; + default: + pr_err("at91sam9263: only supports 2 RTT (%d)\n", + CONFIG_RTC_DRV_AT91SAM9_RTT); + return; + } + + pdev->name = "rtc-at91sam9"; + r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; + r[1].end = r[1].start + 3; + r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; +} +#else +static void __init at91_add_device_rtt_rtc(void) +{ + /* Only one resource is needed: RTT not used as RTC */ + at91sam9263_rtt0_device.num_resources = 1; + at91sam9263_rtt1_device.num_resources = 1; +} +#endif + static void __init at91_add_device_rtt(void) { + at91_add_device_rtt_rtc(); platform_device_register(&at91sam9263_rtt0_device); platform_device_register(&at91sam9263_rtt1_device); } @@ -1034,8 +1141,8 @@ static struct resource pwm_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_PWMC, - .end = AT91SAM9263_ID_PWMC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, .flags = IORESOURCE_IRQ, }, }; @@ -1087,14 +1194,14 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SSC0, - .end = AT91SAM9263_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; static struct platform_device at91sam9263_ssc0_device = { - .name = "ssc", + .name = "at91rm9200_ssc", .id = 0, .dev = { .dma_mask = &ssc0_dmamask, @@ -1129,14 +1236,14 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SSC1, - .end = AT91SAM9263_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; static struct platform_device at91sam9263_ssc1_device = { - .name = "ssc", + .name = "at91rm9200_ssc", .id = 1, .dev = { .dma_mask = &ssc1_dmamask, @@ -1210,8 +1317,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -1248,8 +1355,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US0, - .end = AT91SAM9263_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -1291,8 +1398,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US1, - .end = AT91SAM9263_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1334,8 +1441,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US2, - .end = AT91SAM9263_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1371,7 +1478,6 @@ static inline void configure_usart2_pins(unsigned pins) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { @@ -1405,14 +1511,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) at91_uarts[portnr] = pdev; } -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) { - atmel_default_console_device = at91_uarts[portnr]; - at91sam9263_set_console_clock(at91_uarts[portnr]->id); - } -} - void __init at91_add_device_serial(void) { int i; @@ -1421,13 +1519,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif @@ -1439,6 +1533,9 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + if (of_have_populated_dt()) + return 0; + at91_add_device_rtt(); at91_add_device_watchdog(); at91_add_device_tc(); |