aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap4-panda-common.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/omap4-panda-common.dtsi')
-rw-r--r--arch/arm/boot/dts/omap4-panda-common.dtsi283
1 files changed, 231 insertions, 52 deletions
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index faa95b5b242..8cfa3c8a72b 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -16,6 +16,11 @@
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+ aliases {
+ display0 = &dvi0;
+ display1 = &hdmi0;
+ };
+
leds: leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -60,22 +65,6 @@
"AFMR", "Line In";
};
- /*
- * Temp hack: Need to be replaced with the proper gpio-controlled
- * reset driver as soon it will be merged.
- * http://thread.gmane.org/gmane.linux.drivers.devicetree/36830
- */
- /* HS USB Port 1 RESET */
- hsusb1_reset: hsusb1_reset_reg {
- compatible = "regulator-fixed";
- regulator-name = "hsusb1_reset";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 30 0>; /* gpio_62 */
- startup-delay-us = <70000>;
- enable-active-high;
- };
-
/* HS USB Port 1 Power */
hsusb1_power: hsusb1_power_reg {
compatible = "regulator-fixed";
@@ -97,49 +86,120 @@
/* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
- reset-supply = <&hsusb1_reset>;
+ reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
vcc-supply = <&hsusb1_power>;
- /**
- * FIXME:
- * put the right clock phandle here when available
- * clocks = <&auxclk3>;
- * clock-names = "main_clk";
- */
+ clocks = <&auxclk3_ck>;
+ clock-names = "main_clk";
clock-frequency = <19200000>;
};
-};
-&omap4_pmx_wkup {
- pinctrl-names = "default";
- pinctrl-0 = <
- &twl6030_wkup_pins
- >;
+ /* regulator for wl12xx on sdio5 */
+ wl12xx_vmmc: wl12xx_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio2 11 0>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
- twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
- pinctrl-single,pins = <
- 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
- >;
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+ powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+
+ ddc-i2c-bus = <&i2c3>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ tpd12s015: encoder@1 {
+ compatible = "ti,tpd12s015";
+
+ gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
+ <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
+ <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint@0 {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint@0 {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ hdmi0: connector@1 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
};
};
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
- &twl6030_pins
- &twl6040_pins
- &mcpdm_pins
- &mcbsp1_pins
+ &dss_dpi_pins
+ &tfp410_pins
&dss_hdmi_pins
&tpd12s015_pins
&hsusbb1_pins
>;
- twl6030_pins: pinmux_twl6030_pins {
- pinctrl-single,pins = <
- 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */
- >;
- };
-
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
@@ -166,6 +226,47 @@
>;
};
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ 0x122 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */
+ 0x124 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */
+ 0x126 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */
+ 0x128 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */
+ 0x12a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */
+ 0x12c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */
+ 0x12e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */
+ 0x130 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */
+ 0x132 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */
+ 0x134 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */
+ 0x136 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */
+
+ 0x174 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */
+ 0x176 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */
+ 0x178 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */
+ 0x17a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */
+ 0x17c (PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */
+ 0x17e (PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */
+ 0x180 (PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */
+ 0x182 (PIN_OUTPUT | MUX_MODE5) /* dispc2_de */
+ 0x184 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */
+ 0x186 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */
+ 0x188 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */
+ 0x18a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */
+ 0x18c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */
+ 0x18e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */
+
+ 0x190 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */
+ 0x192 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */
+ 0x194 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */
+ >;
+ };
+
+ tfp410_pins: pinmux_tfp410_pins {
+ pinctrl-single,pins = <
+ 0x144 (PIN_OUTPUT | MUX_MODE3) /* gpio_0 */
+ >;
+ };
+
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
@@ -226,6 +327,33 @@
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
+
+ /*
+ * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
+ * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
+ */
+ wl12xx_gpio: pinmux_wl12xx_gpio {
+ pinctrl-single,pins = <
+ 0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
+ 0x2c (PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */
+ 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */
+ 0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */
+ >;
+ };
+
+ /* wl12xx GPIO inputs and SDIO pins */
+ wl12xx_pins: pinmux_wl12xx_pins {
+ pinctrl-single,pins = <
+ 0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
+ 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
+ 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
+ 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
+ 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
+ 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
+ 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
+ >;
+ };
};
&omap4_pmx_wkup {
@@ -253,6 +381,10 @@
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl6040_pins>;
+
/* IRQ# = 119 */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
@@ -265,6 +397,7 @@
};
#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
&i2c2 {
pinctrl-names = "default";
@@ -314,8 +447,12 @@
};
&mmc5 {
- ti,non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_pins>;
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
bus-width = <4>;
+ cap-power-off-card;
};
&emif1 {
@@ -328,22 +465,37 @@
device-handle = <&elpida_ECB240ABACN>;
};
-&mcbsp2 {
- status = "disabled";
-};
-
-&mcbsp3 {
- status = "disabled";
+&mcbsp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+ status = "okay";
};
-&dmic {
- status = "disabled";
+&mcpdm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcpdm_pins>;
+ status = "okay";
};
&twl_usb_comparator {
usb-supply = <&vusb>;
};
+&uart2 {
+ interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART2_RX>;
+};
+
+&uart3 {
+ interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&uart4 {
+ interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART4_RX>;
+};
+
&usb_otg_hs {
interface-type = <1>;
mode = <3>;
@@ -357,3 +509,30 @@
&usbhsehci {
phys = <&hsusb1_phy>;
};
+
+&dss {
+ status = "ok";
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&dsi2 {
+ status = "ok";
+ vdd-supply = <&vcxio>;
+};
+
+&hdmi {
+ status = "ok";
+ vdda-supply = <&vdac>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-10 06:13:18 +0000