diff options
Diffstat (limited to 'arch/arm/boot/dts/omap3.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/omap3.dtsi | 232 |
1 files changed, 224 insertions, 8 deletions
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f3a0c26ed0c..b2891a9a697 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -35,6 +35,11 @@ compatible = "arm,cortex-a8"; device_type = "cpu"; reg = <0x0>; + + clocks = <&dpll1_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; @@ -56,7 +61,7 @@ ti,hwmods = "mpu"; }; - iva { + iva: iva { compatible = "ti,iva2.2"; ti,hwmods = "iva"; @@ -69,7 +74,7 @@ /* * XXX: Use a flat representation of the OMAP3 interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ @@ -82,6 +87,52 @@ ranges; ti,hwmods = "l3_main"; + aes: aes@480c5000 { + compatible = "ti,omap3-aes"; + ti,hwmods = "aes"; + reg = <0x480c5000 0x50>; + interrupts = <0>; + }; + + prm: prm@48306000 { + compatible = "ti,omap3-prm"; + reg = <0x48306000 0x4000>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + + cm: cm@48004000 { + compatible = "ti,omap3-cm"; + reg = <0x48004000 0x4000>; + + cm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@48002000 { + compatible = "ti,omap3-scrm"; + reg = <0x48002000 0x2000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + counter32k: counter@48320000 { compatible = "ti,omap-counter32k"; reg = <0x48320000 0x20>; @@ -110,7 +161,7 @@ omap3_pmx_core: pinmux@48002030 { compatible = "ti,omap3-padconf", "pinctrl-single"; - reg = <0x48002030 0x05cc>; + reg = <0x48002030 0x0238>; #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; @@ -130,6 +181,22 @@ pinctrl-single,function-mask = <0xff1f>; }; + omap3_scm_general: tisyscon@48002270 { + compatible = "syscon"; + reg = <0x48002270 0x2f0>; + }; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x2b0 0x4>; + syscon = <&omap3_scm_general>; + pbias_mmc_reg: pbias_mmc_omap2430 { + regulator-name = "pbias_mmc_omap2430"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + gpio1: gpio@48310000 { compatible = "ti,omap3-gpio"; reg = <0x48310000 0x200>; @@ -200,7 +267,7 @@ uart1: serial@4806a000 { compatible = "ti,omap3-uart"; reg = <0x4806a000 0x2000>; - interrupts = <72>; + interrupts-extended = <&intc 72>; dmas = <&sdma 49 &sdma 50>; dma-names = "tx", "rx"; ti,hwmods = "uart1"; @@ -210,7 +277,7 @@ uart2: serial@4806c000 { compatible = "ti,omap3-uart"; reg = <0x4806c000 0x400>; - interrupts = <73>; + interrupts-extended = <&intc 73>; dmas = <&sdma 51 &sdma 52>; dma-names = "tx", "rx"; ti,hwmods = "uart2"; @@ -220,7 +287,7 @@ uart3: serial@49020000 { compatible = "ti,omap3-uart"; reg = <0x49020000 0x400>; - interrupts = <74>; + interrupts-extended = <&intc 74>; dmas = <&sdma 53 &sdma 54>; dma-names = "tx", "rx"; ti,hwmods = "uart3"; @@ -260,6 +327,13 @@ ti,hwmods = "i2c3"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap3-mailbox"; + ti,hwmods = "mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + }; + mcspi1: spi@48098000 { compatible = "ti,omap2-mcspi"; reg = <0x48098000 0x100>; @@ -337,6 +411,7 @@ ti,dual-volt; dmas = <&sdma 61>, <&sdma 62>; dma-names = "tx", "rx"; + pbias-supply = <&pbias_mmc_reg>; }; mmc2: mmc@480b4000 { @@ -357,6 +432,22 @@ dma-names = "tx", "rx"; }; + mmu_isp: mmu@480bd400 { + compatible = "ti,omap2-iommu"; + reg = <0x480bd400 0x80>; + interrupts = <24>; + ti,hwmods = "mmu_isp"; + ti,#tlb-entries = <8>; + }; + + mmu_iva: mmu@5d000000 { + compatible = "ti,omap2-iommu"; + reg = <0x5d000000 0x80>; + interrupts = <28>; + ti,hwmods = "mmu_iva"; + status = "disabled"; + }; + wdt2: wdt@48314000 { compatible = "ti,omap3-wdt"; reg = <0x48314000 0x80>; @@ -376,6 +467,7 @@ dmas = <&sdma 31>, <&sdma 32>; dma-names = "tx", "rx"; + status = "disabled"; }; mcbsp2: mcbsp@49022000 { @@ -393,6 +485,7 @@ dmas = <&sdma 33>, <&sdma 34>; dma-names = "tx", "rx"; + status = "disabled"; }; mcbsp3: mcbsp@49024000 { @@ -410,6 +503,7 @@ dmas = <&sdma 17>, <&sdma 18>; dma-names = "tx", "rx"; + status = "disabled"; }; mcbsp4: mcbsp@49026000 { @@ -425,6 +519,7 @@ dmas = <&sdma 19>, <&sdma 20>; dma-names = "tx", "rx"; + status = "disabled"; }; mcbsp5: mcbsp@48096000 { @@ -440,6 +535,28 @@ dmas = <&sdma 21>, <&sdma 22>; dma-names = "tx", "rx"; + status = "disabled"; + }; + + sham: sham@480c3000 { + compatible = "ti,omap3-sham"; + ti,hwmods = "sham"; + reg = <0x480c3000 0x64>; + interrupts = <49>; + }; + + smartreflex_core: smartreflex@480cb000 { + compatible = "ti,omap3-smartreflex-core"; + ti,hwmods = "smartreflex_core"; + reg = <0x480cb000 0x400>; + interrupts = <19>; + }; + + smartreflex_mpu_iva: smartreflex@480c9000 { + compatible = "ti,omap3-smartreflex-iva"; + ti,hwmods = "smartreflex_mpu_iva"; + reg = <0x480c9000 0x400>; + interrupts = <18>; }; timer1: timer@48318000 { @@ -553,14 +670,14 @@ ranges; usbhsohci: ohci@48064400 { - compatible = "ti,ohci-omap3", "usb-ohci"; + compatible = "ti,ohci-omap3"; reg = <0x48064400 0x400>; interrupt-parent = <&intc>; interrupts = <76>; }; usbhsehci: ehci@48064800 { - compatible = "ti,ehci-omap", "usb-ehci"; + compatible = "ti,ehci-omap"; reg = <0x48064800 0x400>; interrupt-parent = <&intc>; interrupts = <77>; @@ -588,5 +705,104 @@ num-eps = <16>; ram-bits = <12>; }; + + dss: dss@48050000 { + compatible = "ti,omap3-dss"; + reg = <0x48050000 0x200>; + status = "disabled"; + ti,hwmods = "dss_core"; + clocks = <&dss1_alwon_fck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dispc@48050400 { + compatible = "ti,omap3-dispc"; + reg = <0x48050400 0x400>; + interrupts = <25>; + ti,hwmods = "dss_dispc"; + clocks = <&dss1_alwon_fck>; + clock-names = "fck"; + }; + + dsi: encoder@4804fc00 { + compatible = "ti,omap3-dsi"; + reg = <0x4804fc00 0x200>, + <0x4804fe00 0x40>, + <0x4804ff00 0x20>; + reg-names = "proto", "phy", "pll"; + interrupts = <25>; + status = "disabled"; + ti,hwmods = "dss_dsi1"; + clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>; + clock-names = "fck", "sys_clk"; + }; + + rfbi: encoder@48050800 { + compatible = "ti,omap3-rfbi"; + reg = <0x48050800 0x100>; + status = "disabled"; + ti,hwmods = "dss_rfbi"; + clocks = <&dss1_alwon_fck>, <&dss_ick>; + clock-names = "fck", "ick"; + }; + + venc: encoder@48050c00 { + compatible = "ti,omap3-venc"; + reg = <0x48050c00 0x100>; + status = "disabled"; + ti,hwmods = "dss_venc"; + clocks = <&dss_tv_fck>; + clock-names = "fck"; + }; + }; + + ssi: ssi-controller@48058000 { + compatible = "ti,omap3-ssi"; + ti,hwmods = "ssi"; + + status = "disabled"; + + reg = <0x48058000 0x1000>, + <0x48059000 0x1000>; + reg-names = "sys", + "gdd"; + + interrupts = <71>; + interrupt-names = "gdd_mpu"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ssi_port1: ssi-port@4805a000 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805a000 0x800>, + <0x4805a800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <67>, + <68>; + }; + + ssi_port2: ssi-port@4805b000 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805b000 0x800>, + <0x4805b800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <69>, + <70>; + }; + }; }; }; + +/include/ "omap3xxx-clocks.dtsi" |